Publishing Error when publishing to .mac

I've been using iweb publishing for .mac for a while and recently, but recently whilst publishing it says that there is a publishing error. However the pages all seem to be there and working fine.
I've been saving the thing in iweb after attempting to publish (all of the edited pages remain red). It's been going on for a few weeks, at first I thought it was a fault with the .mac but now I am not so sure.
Any help is appreciated, it is an inconvenience more than an actual problem but it would be nice if it didn't do it.
Thanks

Quit iWeb, delete the preference file Home Folder/Library/Preferences/com.apple.iWeb.plist, restart your Mac, run Disk Utility to repair permissions, relaunch iWeb and do a "Publish all to .Mac".

Similar Messages

  • I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    SparkchaserEd wrote:
    I am getting an error when resizing the Mac HD.
    What does this error say?

  • HotSpot JVM InternaL Error when running on Mac OS X

    I am getting the following error when running a Java process on Mac OS X 10.1.3. This
    occurs after runing the process for a few hours. What could be the probable causes for
    the same. The error message is given below:
    # HotSpot Virtual Machine Error, Internal Error
    # Please report this error at
    # http://bugreport.apple.com/
    # Error ID: /SourceCache/HotSpot/HotSpot-48/src/os/macosx/vm/os_macosx.cpp, 369
    # Problematic Thread: prio=5 tid=0x4e31e80 nid=0x1975a50 runnable
    Internal Error
    Fatal: error setting thread exception port
    Do you want to debug the problem?
    *** malloc[1439]: error: Can't allocate region

    I am getting the same error, while trying to debug on Windows XP.
    I can reproduce it every time, but can't find much info about it.
    Starting service Tomcat-Netbeans
    Apache Tomcat/4.0.1
    # HotSpot Virtual Machine Error, Internal Error
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.1-b21 mixed mode)
    # Error ID: 5052455345525645255843455054494F4E0E435050001B
    # Problematic Thread: prio=5 tid=0x0F229638 nid=0xb80 runnable

  • How to troubleshoot "Exit Code: 6" error when installing CS5 (Mac)

    So hey. It's been a long, long couple of days trying to figure out this error, and even longer (and more frustrating) trying to actually find someone from Adobe who can actually give me customer support. You think they'd have a bit more streamlined approach when taking care of their customers, but I guess that's why I am here, so lets find out
    Basically, I'm trying to re-install my CS5 mAster Collection I got a few years back onto my MacBook Pro. I got it about 3-4 years ago from my college as a "teachers an student licensing," and it worked great.Amazing. Hallelujah.
    Now fast forward to about 4 months ago; my Mac's Logic Board crashes. I spend a lot of time and money recovering data via a 3rd party data company, and FINALLY get my mac fixed with all files intact.
    Problem is, all of my CS5 programs are gone, although i still have all the files I created with them. So I go to reinstall my Cs5; I still have all the disks (in mint condition) and my serial-code. I insert Application Disc 1 and enter my serial code, the installation gets to the point where it asks for Application Disc 2. I insert disc 2, and after awhile my Mac spits the Disc out and the Adobe Installation Manager says the installation was complete, but with errors, and only 2 of all the CVS5 programs were installed. When I checked the error log on the installation manager, it stated "Exit Code: 6"
    I have looked up this code many time, but i just can't understand how to trouble shoot it. I'm not a programmer or a computer wiz, so some of the multiple multi-step process Adobe suggests for troubleshooting are beyond my ability or understanding. ALL I NEED IS SOME HELP; clarifying steps to trouble shoot this, understanding error code:6, advice on how to fix it, even a way for me to get in contact with and ACUTAL person from Adobe Customer Serivice.
    Please, I am a Graphic Arts Major in college, and I can't afford to have this continue to be an issue. HELP ME.

    Did you remove the bits of the failed install before going on? Try creating a new admin account for the install. If that doesn't work, try doing a fresh download from Adobe's site. Even if you bought the boxed version you can install the trial and enter your serial number.

  • "Download Error" when installing on Mac using Parallels 9

    I have just taken delivery of a new Macbook pro. At work our creative cloud subscription is for windows so I purchased Parallels 9 to allow me to run windows 8 and the adobe suite on the Mac.
    Whenever i try to install the apps I get the message "Download Error"
    Not sure what to do

    Hi James,
    This error comes if you do not have the updated version of Creative cloud app, go to https://creative.adobe.com/products/creative-cloud and download the latest version.
    Restart the computer and try downloading, if that doesn't work then follow the steps given in the following article.
    http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html
    If that doesn't fix then check this thread http://forums.adobe.com/message/5469534 which has other options too.
    Thanks!
    Ankit

  • -208 error when syncing from mac to ipods

    I am getting a -208 error everytime I sync an ipod or nano. The shuffle seems ok, no errors on syncing. Here's a screenshot:
    http://powermixx.com/atempdir/208error.png
    When this error occurs and I press 'Ok', the songs will still sync to the ipod, but nothing else (photos, contacts, etc.).
    When I plugged in this new nano, it prompted me to update the software to version 1.1.2 - which I did. I tried to 'Restore' to the original version, but that failed too!
    Any ideas why?

    I restored my iPod and tried to only copy a small iPhoto album and I still got this error. I'm only trying to copy an iPhoto album and it still occurs. What's the deal, there's no way for me to try and locate a bad audio file out of 25,000 titles. And I'm not even trying to transfer music to the iPod...help!!~~~~

  • Berkeley DB is giving me error when compiling on Mac OS X 10.10

    Hey guys,
    I'm trying to compile Berkeley DB so I can compile OpenLDAP (requires version 4.4 or up) I tried version 6 and it says it doesn't support that one, so I went down to 5 and this one is giving me this error:
    ./libtool --mode=compile cc -c -I. -I../src  -fPIC  ../src/mutex/mut_tas.c
    libtool: compile:  cc -c -I. -I../src -fPIC ../src/mutex/mut_tas.c  -fno-common -DPIC -o .libs/mut_tas.o
    In file included from ../src/mutex/mut_tas.c:11:
    In file included from ./db_int.h:1113:
    In file included from ../src/dbinc/mutex.h:15:
    In file included from ../src/dbinc/mutex_int.h:12:
    ../src/dbinc/atomic.h:179:19: error: definition of builtin function
          '__atomic_compare_exchange'
    static inline int __atomic_compare_exchange(
                      ^
    1 error generated.
    make: *** [mut_tas.lo] Error 1
    Any ideas what can cause this?
    Thanks.

    Berkeley DB release 6.0 and beyond are compatible with recent versions of gcc. BDB releases 5.* compile with the OS X gcc's commonly available at the time of those releases. If you don't already have an older version of gcc installed, it's likely that "port install gcc44" or equivalent will provide the compatible compiler gcc-mp-4.4.

  • How I fixed an "unkown error" problem when publishing to .Mac

    I recently experienced the "unknown error" when attempting to publish my iWeb sites to my .mac account. The error popped up early in the publishing operation, on a site that I had published many times before. I looked around in my iWeb domain folder, and noticed this file:
    ~/Library/Application Support/iWeb/Domain.sites/cached_resources/configuration.apple.com/configuratio ns/internetservices/iapps/publishConfiguration.plist
    Looking at the content (it contains XML data), it was obvious that the file was corrupt, with some data at the end missing. Maybe something went wrong when it was written. As it is in a directoy called "cached_resources", I figured, iWeb should be able to recreate it. So I quit iWeb, removed the file, restarted iWeb. Voila, the file was recreated, without corruption, and publishing works again without a hitch.

    Might the error be -50?
    See http://support.apple.com/kb/TS1583

  • Network Error when trying to Publish to iWeb

    My website was working very well until I made many changes a few weeks ago to my sites on iWeb. Then I had difficulty publishing again until I tried to shut down the program and found it needed to be updated. I updated iWeb and made changes to the website and because it would not let me publish to .Mac I published to a folder. Now, I can no longer publish to .Mac or a folder. I have tried again and agin to publish to iWeb but I continuously receive this Network Error: Publish failed due to a network error. Check your Internet connection and try again.
    If anyone can help me that would be great!
    Thanks...CCM in CR

    Here's another piece of data on this problem. I have also been experiencing the Network Error when publishing, but only on a dialup connection. And in testing I found that if I removed the images from the site so that it contained only shapes and text, it would publish over dialup successfully. The original site including images publishes instantly on a machine at another location that has a DSL connection.
    There doesn't seem to be any problem with line quality on the dialup connection, and the same machine that gets the Network Error on publishing from iWeb can sychronize to a .Mac account and use iDisk to backup images over that connection without any problems.
    So these results seem to indicate that iWeb has some parameters around network timeouts that are restrictive depending probably on a combination of factors like size of data objects in the site file, network traffic and connection speed. It would be nice if a detailed transaction log could be generated that would pin down what is happening more precisely.
    -Allan

  • Html snippets and unknown error when publishing - the mystery deepens

    Can anyone make sense of this?
    I have been using iWeb for a year or so. Personal site with added extra goodies like widgets using iweb more.
    Upgraded to iWeb 08 with a few formatting problems (which I chose to ignore for now) - after version 2.01 I replaced my iweb more extras with the new html snippet thingy and everything was fine - although I still didn't get around to sorting the formatting issues.
    Now we are at 2.02 I decided to use one of the new themes and so I created a new page using golden rod and merrily cut and paste from the existing page. I was loathe to delete the old page until I knew the new one was fine - my plan was then to do a bit of page renaming and voila a newly themed home page. Anyway what I got was;
    Unknown error - when the new page was being created.
    Ok - deleted the offending page - site now publishes fine -so we know this isn't .mac.
    Now I decided to build the new page a bit at a time to see what was causing the problem.
    It turns out to be a html snippet (which works fine on my home page still);
    div style="text-align:center"
    a href="http://outcampaign.org/"
    img border="0" alt="image" width="143" src="http://pharyngula.org/images/scarlet_A.png" height="122"/
    /a
    (I have broken the tags by removing the 's so you can see the text itself)
    When I added this to an HTML snippet the unknown error returned.
    Now I have deleted it and I still get the unknown error for that page.
    So this is definitely an iWeb problem and not a .mac problem.
    Any ideas?
    Home page;
    http://web.mac.com/theedonfamily/Site/Home.html

    why do you use the snippet to actually add the thing? you can just place the image directly into iweb and then activate it as a link. (there are some errors in the script as well!)
    if you want to use the snippet way, then id just change the code a bit:
    +⊗p style="text-align: center;"⊗+
    +⊗a href="http://outcampaign.org/"⊗+
    +⊗img style="border: none;" alt="Image" width="143" src="http://pharyngula.org/images/scarlet_A.png" height="122" /⊗+
    ⊗/a⊗
    ⊗/p⊗
    replace every ⊗ with either < or >.
    max

  • Publishing Error when publishing to folder

    I have not had this problem in the past, but had to redo all of my web pages when my hard drive crashed. I am trying to post the new web pages to a folder to upload them using Fetch, but I keep getting the following error when posting to the folder:
    Publish Error
    An unexpected object couldn't be translated.
    How can I figure out what the object might be so that I can fix it?
      Mac OS X (10.3.9)   Using iWeb 1.0.0
      Mac OS X (10.3.9)   Using iWeb 1.0.0

    Cronnander,
    Sometimes you can watch the progress bar and get an idea of the problem area by noting the page on which the publishing stops; then check the files on that page. Many times illegal characters in individual file names are the source of this kind of problem. Characters to avoid include: ! @ # £ $ % ^ & * ' { } | \ / - [ ]
    Mark

  • Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

    Hi,
    We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW.  Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
    Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
    "An error occurred while saving and / or publishing.  The return code 1 was returned from the server.  Logon to Crystal Enterprise failed.  Unable to commit the changes to Enterprise.  Reason: Failed to commit objects to server : Duplicate object name in the same folder."
    We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
    Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
    Any ideas?
    Thanks,
    Josh
    Edited by: Josh Crawford on May 10, 2010 9:46 AM

    Ingo,
    Apologies for the delayed response.  We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
    In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports.  If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error.  If we Save & Publish without the Translation flag selected, everything is fine.
    There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
    If we come across the problem again, I'll post again.
    Thanks,
    Josh

  • App File Server connection error when trying to run a BI Publisher report..

    hello Gurus...
    As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
    What does our DBA need to do..?
    error message reads..
    Template code: SUARXASR
    Template app:  AR
    Language:      en
    Territory:     GB
    Output type:   EXCEL
    [5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
    oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
    at  oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
    many thanks for looking..
    Steven

    nobody experienced this before..?

  • 404 error when publishing to FTP server.

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."  I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
    A 404 errors means the file is not on the server.
    Checking the connection is just testing the FTP connection.
    I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?
    Do I rename my iWeb file, domain, to index_html?
    No, you don't. The domain file is where iWeb  stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
    Read this : The concept of iWeb Sites
    So if your pages do not load, check for their presence on the server.

  • IMovie 11 error when publishing to Youtube

    Get the following error when attempting ro publish to Youtube.
    "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)"
    I have 71 Gb available from 500 GB (14%). I have also made sure all folders in the "Movie" folder have permissions set to Read/Write and verified and repaired my HDD.
    I just upgraded to iMovie 11 in hopes the problem would correct itself, but it did not.
    Any help would be appreciated.

    Make sure you are using the right password for YouTube. A few months back, they had everyone link their YouTube account to a Google account. If so, you may need to use the YouTube username, but the Google account password.
    Try going to the YouTube web page and uploading it there. The same password should work.
    Message was edited by: AppleMan1958

Maybe you are looking for