Publishing Forlder to Server

Hi There,
I have just published the folder containing my finished website (using iweb '08) to my servicer provider. It is on the server but every page, HOME, ABOUT, etc. has characters that should not be there, The characters are in the form of BLACK TRIANGLES with a (?) QUESTION MARK inside the TRIANGLE dotted over the page.
I have contacted NETWORK SOLUTIONS (my service provider) but they have not come back with a solution.
Has anyone come across this problem before? Here is a link to the HOMEPAGE
http://www.workshopasia.org/WorkshopAsia/HOME.html
Any ideas would be really appreciated!
Thanks,
Jack

This is normally caused by having the wrong settings on your ftp program. It has be UTF-8 encoding.
http://homepage.mac.com/thgewecke/iwebchars.html

Similar Messages

  • ICal published on a server can only be subsuscribed, but not be viewed

    Hi have built iCal into an iframe on my website. For testing I used MobileMe, which worked without problems. But now I would like to store the .ics on another website. I could upload the file through iCal, but if I visit the website, Safari downloads/subsuscribe the .ics. I cannot view the Calender inside the website. Hope you undestand my problem. Any ideas and suggestions.
    Best regards Martin

    Thanks for your reply.
    What I´ve made first:
    Build an Webside in Dreamweaver. Add an iframe there and an html snippet for my iCal Calender. Then I published my Calender through iCal and mobileme. After that, iCal gave me 2 adresses. One for subsuscribe:
    webcal://ical.me.com/my.name/Calendername.ics.
    And one for viewing in a browser http://ical.me.com/my.name/Calendername
    I copied the secend one and paste it in my iframe. Thats worked great. On my webside I could see my iCal dates. This was by publishing on my mobileme account. If i publish on "another server" I only recieve the message/url for subsuscribe.
    My english is not the best hope it is al ittle bit clearer. Thanks

  • One photo will not publish on any server

    Hi, one photo in one of my albums just refuses to publish in any server, and leaves an empty space where it should be. I've tried replacing it with another photo, but the new one wouldn't publish in that spot either, and then when I removed the photo next to it to try and clean the page up, it left two empty spaces side by side. Any suggestions would be greatly appreciated.

    Hi Hazel, thanks for asking. The site hasn't been officially launched yet, but what's there is at http://SameHand.com. Then to see the problem area please go to "Imagery" at the top of the page, then down to the album at the bottom right called "Five Frames of The Same Shot". Then about 3/4 the way down that page you'll see an empty row where the one image refuses to print, and the one next it that's been removed. I've looked closely at the problematic image and it's title, and there doesn't seem to be anything different about it, and I've even tried a different photo in that spot, but nothing publishes. And if I reverse that one with the one next to it, the empty spot goes with it. Any help solving this strangeness would be greatly appreciated.

  • MergedProjects dont appear in Adobe Air Browser Based TOC when published to a server

    MergedProjects dont appear in Adobe Air Browser Based Help when published to a server - its works fine on my local machine. The topics are there on the server as they appear in the Search, but the do not appear in the TOC.
    I have looked at another similar thread to this on the forum but there doesn't seem to be any resolution as yet?
    I am publishing to local machine and then uploading to the server.
    Thanks

    Just to confirm - these files have indeed fixed the merged TOC display problem.
    Thanks Peter.

  • BI Publisher Stand Alone Server

    HI,
    where i can download BI Publisher Stand Alone Server for Windows 7 Home Basic.
    Thanks
    Naga

    Simple Answer.. You are in the WRONG forum.. Try this one: BI Publisher
    Thank you,
    Tony Miller
    Webster, TX

  • I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING"  I have no idea what to do????

    I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING"  I have no idea what to do???? Any Suggestions?

    This is to do with the .htaccess file on your server.
    You either need to deal with this and open it with an html editor or change your web host.
    Do a search of this forum and there are plenty of posts that relate to parse error and .htaccess pages.  Have a look on the right hand side of this post and you will see similar ones like yours.

  • OBI publisher on Jboss Server AS7 [login failed]

    Hi, I've deployed OBI publisher on Jboss Server AS7 but when i try to authenticate with Administrator/Administrator the response is login failed. Thanks for your support i'm blocked

    Thank you for the replies and I am trying to answer the questions in your replies here
    Kranthi : To open in online mode,the BI server should be up so it accepts the password and then directs you to the layout. That is the case, I have OBI server up running and accept login from Answers page.
    Kranthi: first you should go through about offline/online modes before proceeding further.You can go through this from the BI answers user guide. The BI Answers user guide I found is OBI Answers, Delivers, and Interactive Dashboards User Guide, B31767-01 for Version 10.1.3.2. I could not find info for security management or login/password. Can you be more specific?
    Srinivas Malyala: Cross check are you accessing Linux Box rpd on WindowsWhich credentials are you using LDAP or DB etc
    Have you properly configured DSN to access Linux RPD. >
    I am not sure how OBI RPD authenticate logins. I am not using LDAP. I do not have a user Administrator in my Oracle database. Thus it does not appear authenticated with DB.
    I have a DSN configured on the window box, and be able to import database objects.
    Srinivas Malyala: Can you update us exact error message. The only message is "Logon failed." Too bad I cannot attach a file to show the message box. But you can get the same message when you login to the window Admin Tool online or offline with a wrong password.
    OBIEE developer : chk whether the rpd property is read only.. How? But I know if I open it offline, it it says the rpd is read-only. That is because it is opened by the server.
    OBIEE developer : or try this once if all fails to reset the pass..http://obieetricks.blogspot.com/2009/08/obiee-tips-tricks-for-ease-in.html >
    Like to try it but afraid get things more confused before I understand what is going on. I have not loss my Administrator password, I can login offline, I can login to SH Answerers pages.
    Is offline suppose to have the same password as online?

  • Publishing to RoboHElp Server 9 with RH 9 does not refresh the webhelp pro toolbar

    Hi,
    We have an issue with publishing to RH9 Server from a RH9 project.
    When we open the published file from this URL:
    http://ntrobohlpd02:8080/Robohelp/server?prj=Tests_2_Entreprise_FR
    The toolbar (where the TOC, index etc. icons are displayed) comes from another project:
    The toolbar that should display is this one (large green and grey icons):
    Why does the server show the whkin_tbars.htm from another project?
    Really weird.
    We've tried to restart the server as mentionned by Adobe tech support when I contacted them. It worked once, but will we need to restart the server every time we want to publish?
    Thanks

    Presumably the same does not happen if you view the help from the generated location. What happens if you launch the help from the server or from the Web Administrator?
    I always suggest that people manually delete all the files from the server area location before they publish their output. The publish process is unlike the generate process. It is effectively just a copy an leaves all sort of unnecessary files behind from the previous publish. By publishing to a "clean" location you know that the content is good.
    You may also want to delete your browser cache. This has been known to cause confusion by displaying a cached (and therefore old) file. Let us know how you get on.

  • Unable to publish to RoboHelp Server 7

    When I attempt to publish a RoboHelp 7, Webhelp Pro project
    to RoboHelp Server 7 it creates the files on my computer but when I
    select Publish, it generates the error "Warning: Failed to
    publish to "Robohelp 7 Server". reason: Unable to
    connect to the RoboHelp server on 'ip address'." The login
    and password have administrator rights. Does anyone have and idea
    why it will not publish to the server.

    We discovered an incorrect URL. We no longer get the error
    message however, we are still unable to publish to the server.
    WebHelp Pro creates the files and, after I click Publish, it
    displays the progress graphic and never finishes. The progress bar
    never changes and I have to use Task Manager to end the RoboHelp
    program. Has anyone else encountered this problem?

  • No longer seeing Publish to private server after OSX/iCal upgrade

    Hi,
    After Upgrading to OSX Lion and updating Ical, I have come across a problem.
    Excuse me if I do not get all the options and menu options correct, I'm using a dutch version.
    I have been using Ical to publish the calendar of our business to our website for some time now, I publish it to an ftp server where a php script presents the calendar to the visitors. After the upgrade I no longer see the "publish to private server" option under publish. I now only see "share with everyone" and "share with invitees". It has since not been synchronizing. I hope someone knows a solution or can give me directions as to what I'm obviously not seeing.
    Thanks.
    Versions
    iCal : 5.0 (1535)
    OSX: 10.7.1

    Calendars listed under your MobileMe login name (which reside on the MobileMe server) cannot be published to a web page. This facility is still available as before for calendars listed under 'On My Mac'.
    MobileMe calendars can be shared privately to other MobileMe members (read-only or read-and-write); or publicly (read-only) to anyone with a CalDAV client - this includes iCal and Google Calendar (free subscription required for the latter).
    Please see this page for more details:
    http://www.wilmut.webspace.virginmedia.com/notes/sharedcalendar.html

  • Cannot publish to Robohelp Server 8

    Hello All,
    Well let me start by stating that I am a systems administrator but I have had no experience setting up Apache, Tomcat or Robohelp Server.
    This bomb has been dropped in my lap cause I am typically the goto guy. The company has an intranet site with a help section that was created and currently resides on a windows 2000 server with RSC 2.3, and RoboEngine 4.1.  I have been tasked with setting up new server which will be windows 2003 server 32 bit OS.
    Ok. I have followed all the Robohelp Server 8 getting started instructions (page5-6) on how to setup Apache Web Server with the Tomcat servlet for Robohelp server 8. I feel darn near 100% that I have gotten all of that correct. In other words everything tests correctly.  I.e., going to http://localhost shows me the proper index.htm.  I can access the tomcat manager using default UN and PW.
    So I installed Robohelp Server 8 on the F:\Adobe RoboHelp Server 8\robo\server partition.  I did create more than one context but am just trying to publish to the default robohelp.  I create 3 areas.  I do see the context's listed in Tomcat Manager and they all show as started.
    I have created a simple project with one help file in Robohelp HTML software.  I can generate it and it looks fine. I then configure the the WebHelp Pro Single Source Layout to publish to  Robohelp Test Server, server *****WUIT002 (my test server), robohelp adds /robohelp/server automatically. I use admin, admin as username and PW.  I attempt to select an area but get the error 'Unable to get area list from server'. Ok. that is not a good sign.  But I save and attempt to publish anywho...to no avail(of course). I receive the message "Warning: Failed to publish to "Robohelp Test Server". reason: Unable to connect to the RoboHelp server on *****wuit002. If RoboHelp Server is not being used, generate WebHelp instead. More information on RoboHelp Server is available in the help file.."
    I have looked at permissions to the partition and Robohelp server directory. I have basically completely opened them up just to see if that was the issue and I am still having a problem. Help Please. There is so little info out there regarding this product.

    Hello John,
    Thank you for your help. Hopefully you can shed some insight into this for me.
    Here is the log directory zipped up.
    Date: Fri, 4 Sep 2009 22:28:49 -0600
    From: [email protected]
    To: [email protected]
    Subject: Cannot publish to Robohelp Server 8
    Oh, one more thing, uvwaves. Regarding your note about, " I attempt to select an area but get the error 'Unable to get area list from server'."
    I realize this is disconcerting, but usually not a problem and may be ignore (as you did.) If left blank, the "general" area is assigned by default.
    However, the other error, "Warning: Failed to publish to "Robohelp Test Server" is quite another matter and hopefully the logs will help me.
    Thanks
    john
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    http://www.showmethedemo.com/
    >

  • FMLE does not work publishing though AMS server connection succeeds

    Hello Adobe Support,
    Using Adobe Media Server we've run into a problem.
    Occasionally "FlashMediaLiveEncoder does not work on publishing, though AMS server connection succeeds."
    As soon as clients are connected to AMS, they get disconnected and cannot publish a stream.
    After restarting AMS (command: "/opt/adobe/ams/amsmgr server ams restart") it comes back to normal.
    Seems amscore hangs up for a while.
    AMS version: 5.0.6 r9003 x64
    OS: Amazon Linux 6.3
    core.00.log below:
    2015-01-08      00:53:44        22267   (i)2581247      Core (22267) disconnected from edge.    -
    #Date: 2015-01-08#Fields: date   time    x-pid   x-status        x-ctx   x-comment
    2015-01-08      00:53:44        6153    (i)2581247      Core (6153) disconnected from edge.     -
    2015-01-08      00:54:01        22267   (e)2581279      Assert failed in tincan/util/TCAsyncIO.cpp line 1948    -
    We've found two amscores exist in 'ps auwxff' like below when this problem happens. Does this matter?:
    Sl 2014 4:32 ./amsmaster -console
    Sl 2014 6:07 \_ /opt/adobe/ams/amsedge -edgeports :1936 -coreports 127.0.0.1:19350 -conf /opt/adobe/ams/conf/Server.xml -adaptor _defaultRoot_ -name _defaultRoot__edge1 -edgename edge1
    Sl 2014 272:07 \_ /opt/adobe/ams/amscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app -inst -tag _1 -console -conf /opt/adobe/ams/conf/Server.xml -name _defaultRoot_:_defaultVHost_:::_1
    Sl Jan04 1:36 \_ /opt/adobe/ams/amscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app -inst -tag _2 -console -conf /opt/adobe/ams/conf/Server.xml -name _defaultRoot_:_defaultVHost_:::_2
    After restarting AMS only one core exists:
    Sl 2014 4:32 ./amsmaster -console 
    Sl 2014 6:07 \_ /opt/adobe/ams/amsedge -edgeports :1936 -coreports 127.0.0.1:19350 -conf /opt/adobe/ams/conf/Server.xml -adaptor _defaultRoot_ -name _defaultRoot__edge1 -edgename edge1
    Sl 2014 272:23 \_ /opt/adobe/ams/amscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app -inst -tag _1 -console -conf /opt/adobe/ams/conf/Server.xml -name _defaultRoot_:_defaultVHost_:::_1
    pstack of one ams process:
    0bin - encrypted pastebin
    amscheck tool log. It returns code 64512 "Operation timed out":
    0bin - encrypted pastebin
    We have gcore files for each amscore process.
    Let us know if you want them for investigation.
    We want to solve this problem ASAP.
    Do you have any idea what is happening here? Any advice would be helpful.
    Thanks,
    Yusuke

    Hello everyone,
    anyone have any idea what is happening here?

  • About [Publish to ZAV Server]

    Hi All
    I try to build a APP(DVD Shirk) and has tested virtual APP(Simple exe) work fine. I also click [Publish to ZAV Server], it prompt me need to type user auth information, I use domain administrator , then upload files to ZAV Server..But upload end, it show publish failed information like below
    ========
    Publish failed
    An error occured while publishing the application.
    An error occured while uploading the virtual machine.
    There may be a network or you may require more storage on your Spoon.net Account.
    Pleae try again or visit support.spoon.net for further asistance.
    ========
    I think whether I misconfigure the application upload setting. All fields show TODO:<Product Name>, I clear and type real production like DVDShirk.
    or
    I need configure the Virtual Application for streaming type instead of Simple APP (exe) first then click [Publish to ZAV Server] to upload my APP.
    thanks all
    wyldkao

    All
    I check manual add application from ZAV Server, and then I see a step [application] need upload an SVM but in my memory SVM seem a compoment , XM type should be for streaming mode...
    so does this step indeed select SVM ??
    thanks!!
    wyldkao

  • Publish to another server

    Hi all
    This is probably a stupid question, but with iWeb is it possible to publish to another server than the .mac?
    If so.. is it difficult to do?

    Yes, it's possible, not difficult, lots of people are doing it. Here are some tips:
    http://homepage.mac.com/thgewecke/iwebserver.html

  • Creating the report in BI Publisher with SQL SERVER 2008

    Dear Team,
    I want to create report on BI Publisher....i am able to create report with the help of oracle database ...but i dont'nt know how to create DATA MODEL in sql server 2008 ...
    plz tell me the wright way....
    Thanks,
    Him..

    Hi Jin Chen,
    Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
    Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
    11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)  
    0x4064
    Windows SharePoint Services   Database                      
    6f8g Unexpected
    Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
    returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
    11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)  
    0x4064
    Windows SharePoint Services   General                      
    8e2s Medium  
    Unknown SPRequest error occurred. More information: 0x80020009
    11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)  
    0x1EEC
    Windows SharePoint Services   General                      
    8e2s Medium  
    Unknown SPRequest error occurred. More information: 0x80020009
    Do you have any idea based on the error above?

Maybe you are looking for