Publishing freezes?

I use MobileMe to host my website and iWeb to design it. Now, I can't publish my site changes. It appears to stall. When I try to quit iWeb, it tells me that quitting will cause problems while my site is being published. Please help. Thanks!

If this Apple doc doesn't help:
MobileMe: Troubleshooting iWeb publishing issues
...MobileMe live chat support is now 24/7 — see this announcement.

Similar Messages

Review and publishing freezing

I have a project which consists of 180 slides. When I
attempted to review the project in its entirety, on the "generating
slides" dialog box, captivate froze. Subsequently, after checking
the forums regarding the performance issues, I discovered this
project should be broken down into smaller projects. I have since
done so. Now, when I've attempted to review or publish one of the
smaller projects (now 40 slides), Captivate still freezes on the
"generating slides" box. I cannot reivew nor publish this project.
Help!

Additional information:
I can perform a preview of the next 5 slides; however, I
cannot perform a preview "from this slide" from any slide - it
freezes. It is not a memory issue as I can preview and publish
other projects that I have created (much larger ones). I have tried
to take the SWF compression preference off, which will not allow me
to preview at all (not even the next 5 slides), so that is not an
option.
Any ideas?

Live video publishing freezes in IE9

Hello all. I have been unable to find any information regarding this issue and was wondering if anyone out there can point me toward either a solution, or information stating that Microsoft or Adobe are aware of the issue and working on it.
When publishing a live video stream within IE9, it works fine until I either switch tabs or minimize the window. At this point the video freezes for whoever is watching it. Troubleshooting shows the FMS indicates the SWF has stopped transmitting data. For all browsers other than IE9, this issue does not happen. Even previous versions of IE work great minimized.
We are currently using FMIS 4, and I have tried both the current stable 10.3 FP build as well as the FP Incubator, just in case this issue was worked out for the next FP release.
It boggles my mind that no one else seems to have run across this issue with IE9.
Thanks for any help I can get,
Pete

Just in case others are still experiencing this, fret not. A solution has been found and the fix is incorporated into the current Beta for Flash Player 11.
As soon as it hits official release, a lot (if not all) of our odd ActiveX lockups and freezes seem to be addressed. Thank you, Adobe!

Captivate 3 freezing when publishing- help?

Hi,
I’ve reached the end of my tether and was hoping someone could help me out with some professional Captivate insight.
I have had a good look around this forum and tried several things
-          I have unchecked the advanced project compression option (still froze)
-          I have unchecked this AND the compress compiled SWF file (when I’ve done both it has published but published a blank presentation)
-          I have removed the borders on the slides
-      I have saved the audio and slides on to my C drive (and not on my network) and used them from there
I am using Captivate 3 to make a number of lectures available on my company’s website. This involves importing slides from Power Point, matching them with the audio recording of the lecture and publishing them on Flash 8.
I have a new pc with 132 GB of free space however recently any project I am attempting to publish freezes during the publishing stage- during the swf compression. In the past this has worked fine- although I was mostly publishing 2 hour lectures (but one or two 3 hour lectures published successfully) and now I am only publishing 3 hour ones.
To give an example currently I am attempting to publish a lecture with 57 slides. These are non animated slides, only containing text and bullet points. However they are on my company’s heavily branded template and therefore are 1.93 MB in size. Thinking this was the problem I put the slides on a blank template and just included a logo, cutting them down to 300 KB in size- still it froze when publishing. When beginning a project I will
-          Import slides from Power Point
-          Import them as Background Image
-          Advance slides automatically
Then I will import the audio, which admittedly is very large at just shy of 3 hours in length and 157 MB in size. I will then click the distribute audio over several slides option and do that manually in accordance with the lecture. When I publish I choose flash player 8 and the audio settings are MP3, 64 kpbs, 44.10 KHz
Is I just that the audio is too large or does anyone have any other ideas?
I would be very grateful for any help

Hi there
Wow, I would think 3 hours of audio would gag Captivate big time. Most of the Captivate movies I've ever seen or dealt with were perhaps five minutes long if that.
Are you able to perhaps slice and dice the audio? My thought here is that if you really need three hours of audio, perhaps you break the three hour clip in to smaller segments. This would reduce the size of each project and perhaps help you be more successful. Maybe slice a three hour audio clip into six segments of 30 minutes each. Then see if your publishing is more successful working with smaller segments. If so, you could then Daisy Chain the projects together to achieve a seamless transfer where as one segment finishes, the next loads up and plays.
Click here to view a demonstration of the Daisy Chaining process
Hopefully this was helpful to you... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

IWeb 08 keeps crashing while publishing to a FOLDER

Been searching the forum regarding the constant iWeb issues when trying to publish. My initial problem was a rss site error when I tried to publish my blog to my .mac account. After an hour with Apple support, the problem seemed to fix itself.
Now my new problem: After I have created a few new pages on my website, iWeb 08 crashes while trying to publish to a folder. My site domain is on a different server than my .mac blog; so I have to use Transmit to update my site. For some reason, iWeb 08 freezes while publishing to a folder. I thought maybe it was due to the Google AdSense additions, but even after I deleted the pages, recreated the pages without the ad box, it repeats the same error.
Now, I have not added any content other than a text box (no cut or paste).
Any ideas? Is this just a glitch in iWeb that will be fixed in a later update? Very frustrating.

I have a very similar problem. Sometimes when I try to publish my website to a folder iWeb 08 freezes while exporting the Blog Summary page. ... at least that's what the statusbar says. Somebody else in this forum said that one should do the usual things (repair volume/permissions, do a restart) and referenced to a macfixit article for which you need a subscription (which I don't have).
So I did everything he wrote and even ran the maintainance scripts. After creating a new blog entry publishing worked a few times. Now that I changed my last entry 2 or 3 times and always published the site successfuly to a folder, publishing freezes again at the summary page.
When I get home from work I will try to repair the volume again (last time there was aminor volume header error). Running the maintainance scripts, rebooting and creating a new entry didn't work so far.
PS: I don't use AdSense... all I habe is one google map, a youtube video and a few java scripts and iframes on several pages. The entries that I added/changed before publishing froze only containes text and pictures.
Message was edited by: mleich

Freeze Pane Property of Excel in RTF template for XML Publisher Report

Hi all,
I have created RTF template and it's output type is Excel.
I want to apply Freeze Pane Property of Excel in rtf template so that it can be applied to Excel Output.
Please let me know any information regarding this ASAP.
Thanks,
P.A.

This is the Oracle Reports forum. Better post this in the BI Publisher forum.

Why does iPad freeze when I try to publish a video to YouTube?

When I try to upload a video to youtube from my iPad, the screen freezes when I tap "publish." After several minutes, the YouTube dialog box finally disappears and the preview screen of the video appears with a "Publishing to YouTube" progress bar at the bottom. But the bar never advances and the video never gets published. Does anyone know how to fix? Never had a problem before upgrading to IOS 7.
Why did Apple screw up what was a perfectly easy way to upload videos?

First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Preview/Publish Fail & Freeze in Captivate 5

I'm experiencing freezing & "publish failed" messages when I attempt to preview or publish my project. My project contains 1 slide with a text caption and 40 slides recorded as a demo with no audio. I've attempted:
clearing the cache
reducing the project size
copying recorded slides to a blank presentation
installing the latest Captivate 5 update
I have many other similar projects without this problem. Nothing seems to be working!

I had a similar problem when I tried to publish a project in Captivate 5 that I had first created in Captivate 3. This problem did not happen with every 3 --> 5 conversion, only in some projects. Very mysterious.
For me, I noticed that it ALWAYS froze during each Publish attempt at EXACLTY the same spot around 41%, so that caused me to become suspicious: What was around 41% of the way through my slideshow that was unique/different/unusual?
Finally I realized that there was a slide part way through the project in which I had used a quiz feature in Captivate 3 that was not available in Captivate 5, So, when I deleted that slide and re-did it in Captivate 5, the publish worked fine.
Just thought I would throw this in for consideration in case:
your project was actually created in Captivate 3 first and now you are publishing in 5.
if your project freezes at exactly the same spot during each publish, you can investigate slides around that area to determine if there is anything unique/different/unusual

FMS publish record - Video freeze

Hello,
I have a problem to record and replay my video with flvplayback.
I publish a mp4 file with mic and camera.
When i would like to play after, if the video is too long the video freeze
i think after 5000ko.
I my video is more short its ok.
It is possible that is my fms config is bad?
Do i modify something in the config?
Do you have this problem?
i make another test and i see is during record the problem.
After for example : 1 minutes
the record is freeze and take 15-20 sec to restart
publish mp4
Then i test publish record with flv and the record is good no freeze.
Then i thinks is the mp4 format the problem. I need some config in my fms server for mp4?

I guess AIR can act as publisher only when it is provided
with live camera input, It is not having capability of reading
video file from users machine and publish it to FMS.
FMS has the capability of publishing video files as live
which areatored on it.that would require uploading files to FMS'
machine using an HTTP server.
Another workaround would be to use a virtual camera which to
play & capture video file as live for AIR; but it may not be a
desirable way.

Freezes on publish - too large project

(sorry for my English)
Flash Catalyst cs5.5 is freezing when iam trying to publish or run the project.
Sometimes there is a message:
"Flash catalyst cannot publish this project because it is too large. Try removing one or more media assets from your project and try again"
When it is not fully animated it works with no problem but when everything is animated-all links it frreezes on "Run the project" or "cant publish.." on Publish.
With 7 main menu links animated and 13 submenu (component) not animated it works
With 7 main menu links animated and 13 submenu (component) animated it freez, program not responding.
Iam on Mac OSX 10.6.8 but the same happens on Windows 7 64bit.
iMac: i7 2.93, 10gb ddr3.
Please help me with this.

It does work
See: http://bit.ly/bXR9z6
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
I may receive some form of compensation, financial or otherwise, from my recommendation or link

Publishing to MobileMe causes iWeb to freeze

I know similar questions have been asked before, but I can't seem to find a definitive fix. Any suggestions would be greatly appreciated.
1. iWeb fails to log in to MobileMe, then freezes.
2. It freezes on an Intel MacBook, and a PowerPC Mac Mini, running OS 10.4.11 and iWeb '08 2.0.4
I've tried the following suggested fixes.
1. Deleting the iWeb Cache.
2. Deleting the iWeb .plist files.
3. Deleting the existing site through the website.
4. Turning off the firewall.
5. Connecting via ethernet instead of wifi.
6. Re-entering the MobileMe user name and password in System Preferences.
7. Repairing Disk Permissions.
Nothing makes any difference.
iWeb can successfully publish to a folder, so it seems the problem is with the MobileMe login, whereupon the whole program locks indefinitely and you have to Force Quit.
Syncing works, Mac Mail works, iPhoto Galleries work, and I can log in to MobileMe on the web. There's no problem with iDisk as far as I know, but I don't use it.
Help!

You seen to have covered a lot of bases!
All I can add is to uncheck Auto Update in iWeb preferences.
Some UK users have had problems with their BT box as well. You can contact their tech support and see if this is a problem.

IWeb not publishing update- just asking to log into facebook and freezing... Help, please!

When I "Publish site changes" on iweb, a facebook login pops up, and regardless of whether I sign in or not, nothing happens and iWeb freezes. the updates never publish, and I don't have the option to try it again. If I quit (sometimes have to force quit) iweb, it says "quitting while your site is publishing can cause problems", but I have left it open for hours, and nothing ever happens.
Please help!

Heidi,
Go ahead and force-quite iWeb, it shouldn't hurt the website file. However, just to be safe, open ~User/Library/Application Support/iWeb, and copy (not move) the Domain.sites2 file in there to your home folder before force-quitting.
For some reason, the "Update my Facebook" feature in iWeb causes it to freeze. To fix this, simply untic the Facebook box in the website publishing settings page. Then it will publish correctly.

Publish to iCloud freezes app?

If I try to Publish to iCloud by hitting the toggle in my Journals section, the app completely freezes and I have to restart it entirely. Scrolling down before I actually clicking Publish to iCloud shows a "Checking publish status..." notification that is on the bottom of the screen indefinitely. What gives?

Help me =(( still that problem

Published Captivate 6 project freezes on slide immediately before the first question slide

I am running both CP6 and CP7 on Windows 7.
I am still working on projects created with Captivate 6 in Captivate 6. However, since installing CP7, any projects that I edit and publish with CP6 freeze up on the slide just before the first question slide.
Since I have only begun experiencing this issue since CP7 was installed, I am assuming that it is something to do with the fact that i have both versions (6 and 7) installed.
The only solution I have found so far is to open and publish the project in CP7, but this is not ideal as the projects I am working on in CP6 are new versions of ones already published in SAP LSO and I am concerned that publishing new versions of my courses from a different CP version will cause issues in LSO.
Any ideas why this might be happening? Ideally, I would prefer to continue to use CP6 for existing projects and only use 7 for new projects.

Hi there,
Have you created those projects in CP 6 from Scratch?
Can you check the complete version of CP 6 (Help > about Adobe Captivate), it should be 6.0.1.240 or 6.1.0.319.
Can you test with a blank new project in CP 6 after running it as Administrator (Right Click on CP 6 icon, then select run as admin).
Thanks.

Can not publish to .mac, iweb 08 freezes

A couple of days ago I attempted to update my .mac site using iWeb 08 and got an error message saying that the .mac servers were not responding or something along those lines. Tonight I tried again and this time iWeb just freezes up when trying to connecto to my .mac account. These last two times when I've tried to update was the only time I've ever seen the "connecting to .mac account" small popup come up after I select Publish to .mac account. Before (unless my memory fails me), it just went straight to uploading.
I just tried going to the .mac site via apple.com and I couldn't even login. Guessing my problem has something to do with this.
Anyone else having problems with their .mac account?

I just tried going to my iDisk from System Preferences/Internet & Network/.Mac and am getting a connection problem notice.
However, I can get to my iDisk from Finder/Go/iDisk/My iDisk/Web/Sites and...
http://www.mac.com/WebObjects/Welcome.woa/wa/login?aff=consumer&cty=US&lang=en

Publishing freezes?

Similar Messages

Maybe you are looking for