Publishing is changing text properties from Powerpoint

When I go to Publish my Powerpoint (2007, Windows XP Prof. 32-bit) slide show into Presenter (latest), and run the Presenter edition, I'm finding my text formatting is changed. Font size, alignment, spacing, etc. isn't being carried through.
Any ideas?
Need help at helper's earliest convenience, thanks.
JT

From what I understand, in the next couple of weeks, Adobe is releasing an update to P7 (7.05 I think) that should address some of these issues.
I know, I know...it doesn't help right now, but hopefully this will resolve future issues.
Here's the link:
http://www.connectusers.com/news/index.php?cmd=display_news&id=2692
Rob
www.robrode.com/yabb/

Similar Messages

Why am I unable to change text color from black in LR5 book module?

Why am I unable to change text color from black in LR5 Book Module?

I'm assuming you clicked on the color patch besides the word <Character> to open the color picker window.
At the right side of this window there is a vertical bar that has 2 horizontal black lines at the bottom.
This is actually a slider. Pull it upwards with the color picker and color will appear in the window.

Presenter changes text properties when published - still having problems...

When I go to Publish my Powerpoint (2007, Windows XP Prof. 32-bit) slide show into Presenter (7.0.2), and run the Presenter edition, I'm finding my text formatting is changed. Font size, alignment, spacing, etc. isn't being carried through.
Any ideas?
(I updated to 7.0.2, but that did not solve the problem.)
Need help at helper's earliest convenience, thanks.
JT

Here is another example of an issue. Clip art images are missing entirely from animations. There should be a clip art image of a hand holding up two fingers (for step 2) to the right of image of a computer screen. This bug has been an issue for at least 2 months - making me nuts.
FYI: I'm on a mac running parallels (Windows XP) with Powerpoint 2007 running presenter 7.0.5

Unable to change text color (from Black)

For the next person who blunders into this and searches for an answer...
If you have a Condition Code whose decoration is a custom color, and you delete the color, the text goes to Black, and you cannot change the color of text bearing that CC - with local color override, or a Character Format that applies a color (I didn't try Paragraph format).
I am copying formatted content in from an older document that doesn't conform to current templates. I had deleted unused colors in the source, but not unused Condition Codes, one of which rode in with some text. What was controlled by the CC in the old doc is now controlled by a color Character format, except that when applied, the text stayed stubornly black (until I nuked the CC).

Dear FrameMaker 7.1/Unix user,
This does not surprise me. As long as the condition is applied and "Show Condition Formats" is active FrameMaker will show the Condition Color (now: Black) and not any underlying text colors.
- Michael

Changing text settings from Arabic to regular English for Numerals

I purchased Adobe Photoshop from Dubai, however when I edit Text, it defaults to the right-to-left mode (as if In Arabic). Especially with numerals and hyphens, the cursor automatically jumps to the left most end. This is quite frustrating. Is there a setting that can default it to normal English settings? Thanks

Dear friend, you can use the paragraph menu and try both clicks the alignement text and paragraph direction, consecutively one after the other, alternate their usage till u find the right one (which one to click before the other after choosing the language (english).
Sincerely,
Farid

Using external XML document to update / change text fields inside of published captivate output.

Hello
I currently have a project where the client has requested to have the ability to update the text fields inside the project at a later date.
This is due to the nature of the content changing rather rapidly, i would like to set this up so the client can manage this them selfs.
What would the best way to do this be?
I'm thinking XML, an external XML sheet were by Captivate imports the text from this XML sheet and then displays it within the specific text fields contained within the captivate output.
This way the client would just update the external XML document(cut and paste the text in) and then the text would be dynamically updated in the published Captivate document.
any help would be amazing !
Thanks in advance
Nick

Hi Lieve
But isn't this thread more about an end user having an ability to change text after the Captivate has been published and delivered? I could see where that might be useful if making changes then publishing to create a new output. But I'm interpreting that the situation here is that a Captivate project has been published and delivered, and some mechanism is desired that allows the recipient to modify an external XML file to influence changes in the already compiled Captivate output.
Cheers... Rick

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

I'm changing from powerpoint to Keynote. In powerpoint you can change slides by typing in the slide number and hitting enter. I want to do the same in keynote without the slide switcher popping up at the top. Possible?

I'm changing from powerpoint to Keynote. In powerpoint you can change slides by typing in the slide number and hitting enter. I want to do the same in keynote without the slide switcher popping up at the top. Possible?

Wow, I may be losing my mind, you're right. I guess I was doing what you said out of old habits and not even realizing it. Much appreciated.

HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

http://support.apple.com/kb/TS5185

Acrobat XI Pro crashing when changing highlighted text properties

After install update 11.0.07 EVERY after highlighting a section of text and attempting to change the properties the program crashes, this is happening in ALL my documents with highlighted text
Here is what I see, first screen shot is a PDF file that I received. To rule out errors in the first file I created the file in the second screen shot with the same results in both files when attempting to change the highlighted text properties ie CRASH
I'm in two mind as to ether uninstall and re install and apply update 11.0.06 , as there was no problem then, as this only seemed to start when update 11.0.07 was applied. OR to totally remove and re-install and then apply update 11.0.07 and see if this continues

I have the same problem with KERNELBASE.dll but the procedure is the same, I change into something thanks
Nome dell'applicazione che ha generato l'errore: Acrobat.exe, versione: 11.0.4.63, timestamp: 0x52288928
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 6.1.7601.18409, timestamp: 0x53159a86
Codice eccezione: 0xc06d007e
Offset errore 0x0000c42d
ID processo che ha generato l'errore: 0x18ec
Ora di avvio dell'applicazione che ha generato l'errore: 0x01cf833d351b70ed
Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Percorso del modulo che ha generato l'errore: C:\Windows\syswow64\
Nome dell'applicazione che ha generato l'errore: Acrobat.exe, versione: 11.0.4.63, timestamp: 0x52288928
Nome del modulo che ha generato l'errore: KERNELBASE.dll, versione: 6.1.7601.18409, timestamp: 0x53159a86
Codice eccezione: 0xc06d007e
Offset errore 0x0000c42d
ID processo che ha generato l'errore: 0x18ec
Ora di avvio dell'applicazione che ha generato l'errore: 0x01cf833d351b70ed
Percorso dell'applicazione che ha generato l'errore: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Percorso del modulo che ha generato l'errore: C:\Windows\syswow64\KERNELBASE.dll
ID segnalazione: 730f9cd2-ef30-11e3-a912-00269e8fad5f
ID segnalazione: 730f9cd2-ef30-11e3-a912-00269e8fad5f

Changing standard output from Text to XML customization?

Hi Team,
We wanted to get an excel output for a standard reports Accounts Payables Trial Balance, we changed the output from Text to XML. We did not attach a data definition or template definition ..we just wanted to see the XML output.. We got an error in the process ."Caused by: oracle.xdo.parser.v2.XMLParseException: '=' missing in attribute" .. for which we raised a TAR..
We were told in the TAR that changing the standard output from Text to XML is customization!!!!... can you please clarify if this is the case..

Hi
Is this issue get resolved ???
Thanks
Shivdeep Singh

Extract text from Powerpoint

Can anyone tell me whether it is possible to extract text from Powerpoint. Please help me out.

hi,it is possible if you can pay a lot of money,
since I just finished developed a web search app
with my classmates,but we do not do the tranfer
from pp to text ,the client did not ask for it
because he do not wanna to pay so much money.

Changing a .properties file from within a programme

Hi, I was just wondering is there anyway that i can change a .properties file from within a programme?
I have certain values in the .properties file and I want to add a username and password to the file once it has been entered in a login part of the programme.
I have had a look at the docs and can not seem to find any suitable methods.
Cheers Gareth.

store is a good method.
In practical use, sometimes you have a .properties file full of comments (properties files are to be modified by humans, and humans need comments), but they are not retrieved by "load" so they will not be stored back by "store". It's a pity that it happens (the equivalent Windows API, WritePrivateProfileString, has a better behaviour).
Maybe someone has written a method that can modify a properties file, without changing the order of the pairs name=value and without throwing out comments.

Change message text generated from Sourcing Cockpit

Hi,
This is the scenario where the Buyer completes the Shopping Cart (complete requirement) from the Sourcing Cockpit. After this, the Shopping Cart is removed from the Sourcing Cockpit and also the system sends an email notification to the requestor of the Shopping Cart stating that the purchase department cannot procure the item.
We changed the text (Template with headers) to meet our business requirement using the transaction SE61 and document BP_SOCO_APP_ITEM_COMPL_MAIL while keeping the variables &SC_ITEM& and &SC& in the text.
Now we notice that the changed text is appearing in the notification ,but the variables are not appearing now ( i.e the Shopping Cart number and the Shopping Cart line item are missing in the new message). These variables were appearing in the standard .
Do we have to anything else.
Thanks
Sukumar

Hello Ahmad
I think you need to modify the standard FM CRM_INCOMPLETENESS_CHECK to archive the requirement.
In this FM line 301, the field name which is used in the message is filled.
I hope this could be helpful.
Best regards,
Maggie

[svn:bz-trunk] 21285: Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project

Revision: 21285
Revision: 21285
Author:   [email protected]
Date:     2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
Log Message:
Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
Modified Paths:
    blazeds/trunk/apps/ds-console/console/ConsoleManager.as

Revision: 21285
Revision: 21285
Author:   [email protected]
Date:     2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
Log Message:
Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
Modified Paths:
    blazeds/trunk/apps/ds-console/console/ConsoleManager.as

Publishing is changing text properties from Powerpoint

Similar Messages

Maybe you are looking for