Publishing iWeb Error...   ...Has it been solved yet???...

I kinda let it go when I first started having trouble with iWeb 1.1.1, hoping that Apple would fix the error within time. A friend just brought it to my attention that I haven't updated my iWeb in about six months.
Cut a long story short. I'm still getting the...
Publish Error
An error occurred while publishing file “/Web/Sites/iWeb/Site/Blog”.
...And I've just spent the last two hours looking through the iWeb Discussions trying to find an answer, doing what some people have suggested, and not had anything work.
Is there a fix that I may have missed? Or is this something that just isn't fixable until another update from Apple?
PowerBook G4   Mac OS X (10.4.7)  

Laith,
As you can probably tell from the various posts around here, several people are still experiencing various publishing errors similar to the one that you describe. I'd like to think that these errors are sporadic and happen to only a handful of people. It must be difficult to track down all of the variables. Otherwise, I'm sure Apple would have come out with a fix by now. Unfortunately, this is not the case. All anyone can really suggest is to keep trying different things.

Similar Messages

  • Has this been solved yet?

    I came on here a few months ago because after updating to iTunes 7 my iPod started shutting off when listening to certain songs. Someone said to shut off the EQ, which i did and it works fine, but i like to isten to my EQ. I downloaded iTunes 7.0.2 which was supposed to solve all the problems, but it didn't. The problem im having is when i listen to certain songs with the EQ turned to anything, I hear the HD buzz, then stop, then my headphones pop, the screen goes black until a silver apple logo shows up. My iPod then goes back to the regular screen, shows that the battery is almost dead (even when the battery is full) and shuts off the EQ automatically. Any suggestions?

    I kinda took offense to the last post
    No idea why. It was a simple statement.
    im not a computer idiot
    No one suggested you were or weren't.
    I asked because iTunes will sometimes not give you the option to update the iPod, even though you do not have the latest update.
    Since you do have 1.2.1 on the iPod, I suggest you Restore the iPod and see what happens.

  • Kernel upgrade error:The license key library has not been initialized yet.

    We have updated the Solution manager with EHP1 kernel with latest patch55.<br>
    Operating system platform:OS/400.<br>
    We are getting error :The license key library has not been initialized yet.<br>
    We have gone through Note 982056(The license key library has not been<br>
    initialized yet) but after application restart we still are facing problem.<br>
    Also with old kernel(Patch 32) our system is working fine.<br>
    For SAP Router we need to do the kernel Upgrade.<br>
    Work process log:<br>
    *******************************************************************************************************************<br>
    ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/S01/SYS/exe/run/libsapcrypto.o") FAILED<br>
      "Could not load module /usr/sap/S01/SYS/exe/run/libsapcrypto.o.<br>
    Additional errors occurred but are not reported."  (errno=2,No such file or directory) [dlux.c       445]<br>
    N  *** ERROR => <br>
    ===...could not load SSF library /usr/sap/S01/SYS/exe/run/libsapcrypto.o .<br>
    The market place does not show any patch for SAP Crypto Library. To include the file libsapcrypto.o in ibm system i.<br>
    Regards,
    Prasad

    Hi Thomas,<br>
    I have applied the SAP Cryptographic Library IBM AIX for RS6000/Power mentioned in the note on system i.<br>
    The following changes are made:<br>
    In the instance profile,
    as4/ADDLIBPATH = /usr/sap/... is added.<br>
    ssf/name=SAPSECULIB<br>
    ssf/ssfapi_lib=<SAP Cryptographic software directory>/libsapcrypto.o<br>
    sec/libsapsecu=<SAP Cryptographic software directory>/libsapcrypto.o<br>
    I am facing similar error with directory run_sec
    Error log:
    ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/S01/SYS/exe/run_sec/libsapcrypto.o") FAILED<br>
      "Could not load module /usr/sap/S01/SYS/exe/run_sec/libsapcrypto.o.<br>
    Additional errors occurred but are not reported."  (errno=2,No such file or directory) [dlux.c       445]<br>
    N  *** ERROR => <br>
    ===...could not load SSF library /usr/sap/S01/SYS/exe/run_sec/libsapcrypto.o .<br>
    Regards,
    Prasad

  • The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

    Dear Gurus,
    We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
    The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
    We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
    We updated the Kernel to the latest, but still no luck.
    Request for your quick help as we have to complete it by EOD today.
    Thanks a lot in advance.
    Best Regards,
    Anuj

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • The required index has not been created yet in the search engine

    Hi,
    I am trying to change the inspection plan trying to add master insp.characterstics in QP02 the system is giving the following error: "The required index has not been created yet in the search engine".  As per the solution for that error The administration transaction is SES_ADMIN.
    Through the Goto menu, you can enter the relevant customizing directly.
    The index was required for: Business object = QPMK
    Object type = 1
    It is already there. I don't know why still it is showing the error.
    How can i fix this?
    Pl help me. Thanks.
    Madhu

    Hi,
       Not so sure this applies as
    1] The field is using a custom search help which correctly appears for data selection in each case. Its only when we push the go button that the index missing error ishappening for the particular user.
    2] We cloned the user  id for the user having the issue and the clone has no problem at all using the search help.
    Weird huh?
    Ross

  • The license key library has not been initialized yet.

    Hello Experts,
    I just recently installed the SAP ABAP Preview Edition and after getting my license key I tried installing it via transaction SLICENSE. Now, I clicked on new licenses button then from there I clicked on 'INSTALL'. Then it prompted me to load the text file containing the license key. But when I clicked ok the error 'The license key library has not been initialized yet.' appeared. Whats the solution for this? hope you could help me out here guys. Thank you and take care!

    Hello,
    Could you check the following parameters in your profile file (default in c:\SAP\NSP\SYS\profile\NSP_DVEBMSGS00_<HOSTNAME>):
    [code]
    ssf/ssfapi_lib = $(DIR_CT_RUN)\sapsecu.dll
    sec/libsapsecu = $(DIR_CT_RUN)\sapsecu.dll
    check whether '\' exists here ^
    [/code]
    If the backslashes are missing, add them, restart the ABAP application server and try to install the license file again.
    Kind regards,
    Klaus

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT4009 I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    Hi Dave_warr,
    I would suggest restarting the iPad and see if the download resumes.
    iTunes: How to resume interrupted iTunes Store downloads
    Resuming downloads from an iOS device
    From the Home screen, tap the iTunes icon.
    For iPhone/iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password.
    Click the "OK" button.
    Click the Resume or Resume All button to start the download.
    If you don't see the application to download it, then follow these troubleshooting steps:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If the app does not appear in your list of purchases, then contact the iTunes Store for help:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    I hope this information helps ....
    Have a great day!
    - Judy

  • I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

    I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

    I sent it via FedEx. 
    Call FedEx.  They will be able to track their own packages.  They will let you know if your iPod Nano was delivered and to who!

  • HT204370 can you return a movie purchased by mistake that has not been viewed yet?

    can you return a movie purchased by mistake that has not been viewed yet?

    Hi jimmy505,
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac.  Please advise on the process.  Software has not been used yet.

    I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac.  Please advise on the process.  Software has not been used yet.

    you need to exchange your win cs5.5 for mac cs5.5.
    unfortunately, adobe only offers that for cs6, Order product | Platform, language swap

  • I want a solution to my problem and i hope to see any number to contact you for information i'm from saudi arabia and the problem has not been solved so far and i sent my problem via a Email twice before

    I want a solution to my problem and i hope to see any number to contact you for information i'm from saudi arabia and the problem has not been solved so far and i sent my problem via a Email twice before

    Most of the people on these forums, including myself, are fellow users - you aren't talking to iTunes Support here.
    Have you contacted iTunes Support as was suggested on your duplicate posts :
    https://discussions.apple.com/message/22178793#22178793
    https://discussions.apple.com/message/22178411#22178411

  • Playing a commercial DVD on the remote disk feature (PC) from a Mac Mini shows the error -70025. This error has it been resolved?

    Playing a commercial DVD on the remote disk feature (PC) from a Mac Minishows the error -70025. This error has it been resolved?

    Since you mention "commercial DVDs" I asume they use some kind of copy-protection.
    Copy-protected CDs and DVDs cannot be used/shared http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh19568.html
    Stefan

  • I update my credit card but the paymaent has not been debiteded yet

    I update my credit card but the paymaent has not been debiteded yet, what do I need to do?

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    I think iCloud isn't coming until this fall and not until iOS 5 is publicly available. Right now there is confusion because all this stuff is still in beta and things are under NDA and may still change.
    I'd just set the 3GS up the same as currently. When iOS 5 is available in the fall (and I don't think Apple has specified beyond "fall"), before you update, there should be any number of guides to setting things up and how it will all work. http://macworld.com is a good place to look for such information.

Maybe you are looking for