Publishing iWeb site using MobileMe

I created a new website using iWeb, set up the CNAME alias, and published it using MobileMe. iWeb indicates the website has been published. When I go to the website, I get an error message:
Directory Listing Denied
This virtual directory does not allow contents to be listed.
Help!?

I followed the thread and performed the activities to test the site. I too was able to see the site. When I looked at the URL for the actual site, it still shows mac, not mobileme. Is this part of the problem?
http://web.mac.com/ccgaler/TProcurementSolutions/Home.html
I'm using Netfirms for the domain name, it was all fine until I used the "Masking" feature. When I selected the "On" radio button, I lost all my graphics and the navigation bar on my site. Now I'm not sure if I have to start from scratch, or if that would make a difference.
Thanks!
C

Similar Messages

  • Inability to publish iWeb content using MobileMe

    I'm in a serious time crunch to get my site updated on Tuesday. I've made lots of edits and revisions and saved frequently. When I attempt to publish in part or whole, it acts as if it is publishing successfully, but when I visit the site, it's the old version. I've cleared my cache several times now. I even tried Apple's suggestion to quit iWeb then find and delete some com.apple.iWeb.plist files. Guess what, I don't have those files in the location specified. I have other com.apple.... files but nothing for iWeb. I logged in to me.com to make sure everything is ok with my account - and it is. I don't know what else to try. Any help appreciated

    Yes you do have the com.apple.iWeb.plist file. You are probably looking in the wrong place for them though. Rather than going to the System Library/Preferences you need to go to your Home User Library/Preferences instead and this is where the com.apple.iWeb.plist file is - the iWeb application and domain files are stored under Home user/Library/Application Support/iWeb and so the plist file is under the home user Library/Preferences.

  • Publishing iweb site using 123 reg hosting

    I have uploaded the folder via ftp, but when I go to the website there is basically nothing there apart from a box.
    Has anyone else had problems using a hosting service other than .mac??
    website is http://www.freshfaux.co.uk
    cheers

    I had exactly the same problem with http://www.forkliftagency.co.uk
    For some reason 123-reg hosting does not like you uploading folders all in one go. I had to create the folder in the control panel, and then drop the files into each folder. Same for deleting; 123 will not let you delete a folder with contents.
    You need to delete the contents first, and then delete the folder.!

  • PUBLISH IWEB SITE CHANGES

    After clearning my CACHE files to correct one problem now I have another.  When I attempt to publish changes I get the following message
    Publish Error
    Can't create teh file "rich_berrett_photography/WELCOME.html."  The diskk may be damaged or full, or you may not have sufficient access priveleges.
    I AM STUCK....  HELP

    If you're using iWeb 3 look at this webpage to see if you need to make any changes to your ftp file path in iWeb:  Publish iWeb site using FTP
    OT

  • I have 25 gigs of space in iCloud. I used to publish my iWeb sites to MobileMe. Is there a way to now publish this iWeb sites to iCloud?

    I have 25 gigs of space in iCloud. I used to publish my iWeb sites to MobileMe. Is there a way to now publish this iWeb sites to iCloud?

    Welcome to the Apple Support Communities
    Apple didn't include web storage on iCloud. There are other web hostings (Blogspot, GoDaddy, etc.)

  • HT1338 I am looking to publish a web site I created in iWeb to another hosting provider.  I have never published this site to MobileMe nor do I have a MobileMe account

    I am looking to publish a web site I created in iWeb to another hosting provider.  I have never published this site to MobileMe nor do I have a MobileMe account.  Can someone please help me?

    Hi Larry, no experience with iWeb, (which is ending soon), but what kind of files & folders does it make locally?
    You need a Wb Hosting service & an ftp client, if you need more info reply with that & what kind of files/folders it made.

  • Publish an iWeb site using Lion Server

    Does any one know how to publish an iWeb site using Lion Server.
    I've been getting failures every time I try to publish using ftp server choise.
    HELP!!!

    I solved this by turning off passive mode. I was using iWeb and Rapid Weaver for creating websites and had the same problem. Now they both work fine on the transfer. Hope this helps.
    JR

  • IWeb without using mobileme??

    can i create a website and later get a domain name and publish the site i created in iWeb without using mobileme or anything like that?? sorry, new to all this and don't want to get going and realize i need a mobileme account

    To add to Roddy's post - these are the features that will be lost by not hosting on MobileMe:
    Features Unavailable When Publishing to a Non-Mac Server:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Blog RSS Subscription
    ◼ Hit counter
    ◼ Enhanced slideshows
    Most can be overcome on the 3rd party server except for the Enhanced slideshows. Don't ask me what that is because I've not been able to find out (I use MMe). You can use a good, strong 3rd party blogging service and embed your blog site in one of your site's pages: Embed a Site Within an iWeb Page. For password protection most commercial hosting services offer that feature, for either the whole site or individual pages.
    OT

  • Why does my font change when i publish my site on mobileme?

    why does my font change when i publish my site on mobileme?
    Can anyone help me, i'm using a font that i got from the internet when i look at it in safari its fine but if i log in from another pc/mac the font is changed!!
    Please help.
    e-mail - [email protected]

    If that's the only place you used that unique font, yes.  Convert the textbox to an image file by applying a drop shadow to the font and setting the opacity of the drop shadow to 5%.
    Click to view full size
    OT

  • Published iWeb site the hyperlinks formatting

    When I view my published iWeb site the hyperlinks do not all have the same formatting as they did in iWeb. How can I resolve this?

    Hello, I am using iWeb 3.0.4 (601). I publish the website to my local machine (from iWeb) so I can send it off to someone more technical to publish to the internet and manage all of the 'optimisation' etc. This is where I am seeing it is not as it looks within iWeb. Can I 'send' it to you somehow? Thanks for your response.

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • IWeb wont publish updated pages to site using Mobileme

    Tried to publish 2 updated pages to my current iWeb site published on Mobileme. Am directed through a Facebook username and password login. (Don't remember this step from prior publishing.) Then nothing happens. No site update. No option to publish site available within iWeb. And no way I see to save my changes made in iWeb before I exit the program to try to figure out. I have lost work twice. What is happening and how do I correct the trouble?

    You must have checked the box next to "Update my Facebook profile when I publish this site."
    Click the site name at the top of the left column in iWeb to get to the Publishing Settings page to change this.

  • IWeb won't let me publish 2 sites to mobileme....

    I have 2 sites created with iweb with 2 different domain names.  When I edit both sites, only one site gets published.  I do not even have the option of 'publish to mobileme" on pages of my second site.  I have tried 'publish all' and Iweb shows that both sites are being uploaded but then no changes appear on site #2 online when refreshed...  Can anyone help me?

    iWeb 2 always publsihed all sites in the doman file.  That's why many users would create individual domain files for publishing. However, if publsihing to the same MMe account there new site would be published but the existing site(s) would be deleted. 
    The fact that you're publishing the two sites to different accounts would aleviate that potential problem. For using multiple domain files with iWeb 2 I sugget you get iWebSites. 
    I use iWebSites to manage over 75 individual sites.  It lets me create multiple sites:
    Click to view full size
    and multiple domian files:
    Click to view full size
    If you have multiple sites in one domain file here's the workflow that I used to split them into individual sites with iWebSites:
    Click to view full size
    Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
    This lets me edit several sites and only republish the one I want.
    If you don't use iWS you can publish your sites to a folder on your hard drive and upload the site file manually to the appropriate family account on your iDisk.
    NOTE:  Since iWeb is no longer being supported by Apple I suggest you purchase the boxed iLIFE 11 which contains the latest iWeb as well as iDVD which is also being discontinued by Apple.  Once those boxed copies of iLife 11 are gone there will be no way to obtain the last version of iWeb, V 3.0.4.  IMO it's worth the cost for the improvements to iWeb over version 2.  Also iWeb 3 has a builtin FTP client which will make is eacy to publish  your site(s) to a 3rd party hosting server which will be necessary after MobileMe is discontinued on June 30, 2012.
    With a 3rd party host like HostExcellece, which offers a package for $3.95/mo (2 year committment) that included unlimited space and bandwidth, one free domain name, multiple email addresses and excellent 24/7 ear-to-ear customer support,  you can publish as many sites to that acocunt as you'd like.  Selecdt a domain name and publish each site to it.  The URL for each site would be www.your-domain-name.com/site-name.  So you can have as many sites under that one domain name as you'd like.   That's what I do.

  • How can I publish my iweb site using Jumpline as a host?  Anyone done it?

    My dad has a hosting account with Jumpline and can have an infinite amount of websites with unlimited storage (type of account is no long available fyi), so we have it set up on his end (thanks to help from a true IT guy, but he is a PC IT guy) but now I need to know what to do to publish the site from the iweb end... I am not familiar with ftp or much of anything with hosting and servers, etc.  I have the user information, password and a location of where the website is set up at on the Jumpline server but again just not sure how to go about this in iweb.  Any help would be appreciated!!    I am using iweb v. 3.0.4

    Nevermind!!  I didn't realize I could use the FTP option for this server - it's publishing right now! 

  • Publishing iWeb Site on a Personal Domain

    Hi,
    I'm having a lot of trouble publishing my site to a personal domain. I am using iWeb 08 and am publishing via MobileMe and domains.com is my host. For some reason, I just can't get the site to publish on my personal domain. My personal domain is registered on MobileMe and the CNAME is programmed into the domains.com DNS management area. What's going on that's not allowing it to appear?? The site is just blank...please help!

    Works fine for me too, but not if you place the www before your domain name. If you want this too, you may need to go back to your DNS settings and set up a new CNAME for your domain name that includes the www part too, but only if you want to.

Maybe you are looking for