Publishing no longer works in latest Edge

Publish seems to not be working in this latest Edge.
All of our projects published using the latest version get stuck on the preloader. Not sure why but yesterday everything published fine. Today under the new Edge all of our files get stuck in the preload stage. I will add that we're getting many other bugs. Edge is letting us there's errors and needs to quite. Opening a new project shows the project as open but doesn't actually show the project itself. Lots of bugs!

In the previous version of Edge, we havn't used this directive.
It has been introduced in this release only.
You can read the benefits of using it here: John Resig - ECMAScript 5 Strict Mode, JSON, and More
So, if the published file works in the strict mode, it's better. But if it doesn't as in this case, you have to manually edit the published proj_edge.js file and remove manually.
For your question "Is there a way I can remove this in the edge file so that when I publish it actually works?", answer is no, as when you publish Edge creates that file all over again and gives the minified version.
hth,
Vivekuma

Similar Messages

Home sharing no longer works in latest update. Please fix

Home sharing no longer works in latest update. Apple Please fix.

well, try if anything in the following support articles (unless already consulted) helps:
_*iTunes: Troubleshooting Home Sharing*_
[_*Troubleshooting security software issues*_|http://support.apple.com/kb/TS3125]
[_*Troubleshooting Home Sharing with Apple TV (2nd generation)*_|http://support.apple.com/kb/TS3509]
good luck !
JGG

Syncing with iPad mini does no longer work since latest update of iTunes

Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

Itunes no longer works after latest update

I updated the latest version of iTunes. Now, it no longer works. Then my computer told me to update the latest version, so tried again, but again it didn' work. So in uninstalled iTunes and tried to install it again. It didn't work. I even tried with an older update after I had deleted the latest one and it didn't work. Now my computer tells me that some file or stuff was missing.
Thanks for any help!

...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
Please help me!

ITunes Toolbar mini-App no longer works in latest 10.0.1 upgrade

Has anyone else found a way around the issue of the iTunes Toolbar mini-App that lives in the Windows Taskbar no longer responding to anything (can't seem to use any of the buttons or expand into the full app) with the latest 10.0.1 upgrade? The only way I have found to now stop iTunes is to go and kill the process (not cool!). If you like using the iTunes Toolbar mini-App I seriously recommend waiting for 10.0.2 and stay with 10.0 for the meantime.

Did you check your security settings & trusted locations to ensure that the URL is on a trusted site??
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 18 Oct 2011 13:36:13 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: FDF no longer works in Reader 10.1.1. Worked in 9.x and previous
FDF no longer works in Reader 10.1.1. Worked in 9.x and previous
created by daniel11223344<http://forums.adobe.com/people/daniel11223344> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/3978319#3978319

Bluetooth headset no longer work after latest update

I use a Plantronics Voyager Pro bluetooth headset for Skype calling and Ventrillo on my Macbook Pro. Since after the latest update, it no longer works. Both input and output doesn't work and the applications hang for about 30 seconds. I've tried re-pairing the device to no avail. Both applications work if I switch them to the built-in microphone.
I also tried doing the same thing with a Plantronics 245 and I get the same issue.
Both headset work with my phone.

FIXED!!!!
Steps to UNF*ing your Mac.
1) Install an app called Pacifist
2) Download the individual installer for the Magic Touch Update here: http://support.apple.com/kb/DL1066 DO NOT INSTALL THIS
3) Load your OSX Install DVD
4) Open the MagicTrackpadMultiTouchUpd1.0.dmg in Pacifist
5) Open your OSX Installer DVD in Pacifist
6) Look at the MagicTrackpadMultiTouchUpd1.0.dmg package in Pacifist to see exactly what it installed and where.
7) Find these SAME EXACT FILES on the OSX Installer and reinstall them as root (e.g. using your admin password when asked)
8) Repair permissions (Do NOT skip this)
9) Reboot
10) MOST IMPORTANT: Never install the update again!!
Your bluetooth headset will work in skype after this. You will replace EVERY FILE THE MagicTrackpadMultiTouchUpd1.0.dmg package installed with one from the DVD. If you can not find it, the search bar in Pacifist works wonders.
You will get an error if you try to reinstall admin.framework about not having permission to install. This will be the ONLY file you will not reinstall.
Yes, you have more or less, in a very complicated fashion uninstalled the update (software update shows the Magic Touch update as needed afterwards).
Find me on Skype, where I will be able to walk you through it from my Plantronics Voyager Pro bluetooth headset at james.t.bolin
In case you developers want to know, I'll give you my play by play. After the installation of the update, it borked the bluetooth causing Skype to freeze. Reinstalling all the original kexts from the installer disk fixed the skype freezing issue, but there was still no audio. In fact, after reinstalling everything in the System>Library folder still left me with no audio, but it would not freeze or cause kernel panics at this point.
This is where I got the magic. I started replacing stuff in the usr directory. Upon replacing the usr>libexec>cups>backend>bluetooth; usr>libexec>hidd; usr>sbin>blued; and the blue.8 and hidd.8 files, I got audio back and the stars aligned in perfect harmony. I suspect apple needs to retool the kexts and rewrite the root level profiles.

Airport no longer working after latest updates

After my latest software updates, the Airport on my 13" Macbook is no longer working.
I can connect to networks and can get full signal from the wireless router in my home, yet none of my browsers can actually connect to the internet.
I've tried multiple wireless connections and none function properly. Suggestions?
I'm currently connected directly to my NETGEAR router via ethernet

Experiencing similar issue.
Wired works forever without any issue. Wireless (airport) works for a while (random 2-60 minutes, could be related to data volume) then gets stuck. At that point getting back to wire (without reseting the airport AP) solves it. Also, cycling the airport client (disable/enable) gets it to work for a few minutes... until it gets stuck again. Other devices (iPhone, iPod touch) connected to the same airport AP do get access while the macbook is stuck.
Thought this could be 11n related since the macbook is the only device running 11n. However, while wireless http/web access is stuck on the macbook one can still perform ftp connections (bit no file transfer as such), pings and/or access the time machine configuration (some of this seems to be randomly working) from that macbook. Not sure whether 11n handles short bursts and large bursts differently?
Finally, the behaviour is the same whether using Safari or Firefox and relaunching eitehr app does not solve it.
Clueless for now.

Now playing feature in windows messenger no longer works with latest iTunes

I recently updated iTunes to version 7.1.1.5 but now the "Now Playing" feature in windows live messenger no longer works. I had no problem before the update. Any suggestions, as i find this rather annoying
Windows XP

Download & install this security update:
http://support.apple.com/kb/DL1489
Software update should show it as available.

Multi room DVR no longer works after latest update

I just recieved an update on my 2 DVR's and now the multi room function no longer works. I no longer see the other DVR's recodings. When I try the verizon auto dvr fix it locks up and freeses and says to try again later sometime. Anyone else get an update and loose multi room function?
Solved!
Go to Solution.

Thanks finally worked after the 3rd time of rebooting everything.

Easy Link 1.6 no longer works and latest version states will not work with my router

I have the WRT54G router (version 8.00.2 firmware) and the Easy Link Software I got with it no longer works correctly (version 1.6), saying I am not connected to the internet even though I clearly am connected. (I theorize that it tries to connect by pinging Linksys and I cannot ping Linksys using any method, so I think Linksys no longer accepts pings.) I downloaded the newest version, thinking it would work, and the forum states it will only work with a few routers that are more recent (I bought mine in Jan 2008.) Am I out of luck, with no verion working correctly? I appreciated the information that was found in the Easy Link Advisor software that I no longer have.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

Bluetooth headsets no longer working after latest update

Has anyone else run into this, &/or resolved it?
our btooth headsets were working (barely) w our Mbook Pros. the latest s/w update completely killed it completely.
the system recognizes the devices, but no audio will work. I've tried everything I've found on it:
- deleted and repaired the headsets
- cleared the PRAM
- deleted the btooth audio profiles
- hardset the headset use for the various apps
any idea if Apple is aware that this problem exists, or any ideas as to how to pass it on?
For the first time in a year, I'm missing my Dell laptop, and may have to consider going back to the darkside if this continues. Our side business relies on Skype, and using wired headsets won't cut it for long.....
I am really surprised that the btooth support in OS X is so poor -- really didn't expect this to be a problem.

Has anyone else run into this, &/or resolved it?
our btooth headsets were working (barely) w our Mbook Pros. the latest s/w update completely killed it completely.
the system recognizes the devices, but no audio will work. I've tried everything I've found on it:
- deleted and repaired the headsets
- cleared the PRAM
- deleted the btooth audio profiles
- hardset the headset use for the various apps
any idea if Apple is aware that this problem exists, or any ideas as to how to pass it on?
For the first time in a year, I'm missing my Dell laptop, and may have to consider going back to the darkside if this continues. Our side business relies on Skype, and using wired headsets won't cut it for long.....
I am really surprised that the btooth support in OS X is so poor -- really didn't expect this to be a problem.

Clip notes no longer works with latest version of reader.

I understand that a security issue made Adobe upgrade Reader so that clip notes produced in Premiere CS3 would no longer play. This is a known issue. The fix is posted on this forum and it recommends upgrading to Premiere CS4. However I get the same problem as I did in Premiere CS3 i.e. clip notes is blocked by the latest version of Reader This has occured after spending a huge amount on the upgrade. Nice one Adobe what a con! I have tried to contact adobe customer support but I can not speek Punjabe and they can not speek English. What a waste of money!
Does anyone know of a fix.

Aaron,
See if this works for you: Clip Notes Review PrPro CS4

Samsung SE-506BB Blu-Ray Player/Writer no longer working after latest OS X update

Since downloading the latest OS X update ("Command Line Developer Tools for OS X Mavericks") that rolled out today, I've discovered that my external Samsung SE-506BB Blu-Ray player will no longer read any discs and that ejecting and restarting the device and updating the device firmware does nothing to solve the problem.
This exact issue has been reported numerous times since January on these forums
https://discussions.apple.com/thread/5829322 (1/26)
https://discussions.apple.com/thread/5836103 (1/27)
https://discussions.apple.com/thread/5895950 (2/12)
and in each instance deduced the problem to be the direct result of some software glitch in the most recent Mavericks update.
Is anyone else experiencing this issue currently and/or managed to fix it on their end? Moreover, admins, what if anything is Apple doing to correct this problem given that it's clearly a persistent issue? Please comment below if you happen to know anything so we can all get to the bottom of this mystery.

I just noticed this today with my player as well, which had otherwise been working perfectly since first purchasing it a couple of months ago.
The only source to my immediate problem that I can think of is the "Command Line Developer Tools for OS X Mavericks" update that rolled out today, which I installed shortly before attempting to boot up my drive -- the only thing I can ascertain is that this has to be an ongoing software update issue with Apple that affects some/all of the players with each problematic update round, since others have reported experiencing similar problems from as far back as January.
Were you able to fix your problem at all?
Message was edited by: next_imaginaut

Mail on my iPad 2 is no longer working after latest update. If I delete the account and reinstate it will I lose everything that was there before?

Mail on my iPad 2 has stopped working since the latest update. The symbol is on the screen in its' usual place but it either opens briefly, just showing the blank framework for Mail before suddenly quitting, or all the App symbols disappear completelly from the screen. I'm not confident that i know what to do! If I delete the account and reinstate it will I lose everything that was there before? Looking at an earlier question along the same lines it doesn't appear that that would make a difference. If I reset the whole thing will I lose all my documents, photos etc.?
i'd be extremely grateful for some clear guidance!

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Special Keys(Ctrl-opt-esc) in Screen Share no longer working after latest update

I typically remote into a machine back home through icloud once or twice a week to help my wife kill a program that can get stuck. I used to be able to send command+opt+esc to get to the remote computers force quit applications window. But now when I do that after the latest update, it only does it on my computer and no longer send the command to the remote screen share session.
Anyone else experience this or have a fix?
-Dan

(A) Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.
(B) Close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Publishing no longer works in latest Edge

Similar Messages

Maybe you are looking for