Publishing NVR (Network Video Recorder) using ISA Server 2004

I have dahua make NVR, i was publishing this through internet using ISA server 2004. In local network, its working fine. But in internet, i able to see the login screen, after enter user name and password. "Fail to connect the device in main connection"
message comes up.
Please give suggestion for this..

Did you find any solution for publishing NVR on ISA server 2004, i have same problem, please share

Similar Messages

  • Applet fails to connect behind isa server 2004

    hi, for security I have to activate authentication on Isa server 2004 and under this configuration the applet can't connect here is the log:
    NETg Learning Studio (Web) 3.1.8.8
    Copyright � 1997-2005 Thomson NETg, a division of Thomson Learning, Inc. All rights reserved.
    java.vendor = Sun Microsystems Inc., version = 1.5.0_06
    os.name = Windows XP
    Friday, September 15, 2006
    Memory: Total 4767744, Free 998864
    SMD was found.
    AICC_HACP_Connection: IOException processHACPPost().
    java.net.SocketException: Connection reset
         at java.net.SocketInputStream.read(Unknown Source)
         at java.io.BufferedInputStream.fill(Unknown Source)
         at java.io.BufferedInputStream.read1(Unknown Source)
         at java.io.BufferedInputStream.read(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
         at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
         at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
         at netg.AICC.HACP.nls_jk.i(DashoA8374)
         at netg.AICC.HACP.nls_jk.a(DashoA8374)
         at netg.AICC.HACP.nls_nj.allSecure(DashoA8374)
         at netg.signpost.nls_kq.run(DashoA8374)
         at java.security.AccessController.doPrivileged(Native Method)
         at netg.signpost.SunSecurity.g(DashoA8374)
         at netg.signpost.SunSecurity.f(DashoA8374)
         at netg.AICC.HACP.nls_jk.a(DashoA8374)
         at netg.InterNETgBase.run(DashoA8374)
         at netg.util.nls_l.run(DashoA8374)
    Could not communicate with HACP host!
    and when (for testing purposes) I deactivate authentication on my ISA the applet works fine (here is the log)
    NETg Learning Studio (Web) 3.1.8.8
    Copyright � 1997-2005 Thomson NETg, a division of Thomson Learning, Inc. All rights reserved.
    java.vendor = Sun Microsystems Inc., version = 1.5.0_06
    os.name = Windows XP
    Friday, September 15, 2006
    Memory: Total 9728000, Free 1392944
    SMD was found.
    Sending HACP host the following:
    command=GetParam&version=2.0&session_id=CRS3684_SCR2304_STU9782_SOL59084_&AICC_Data=
    HACP host returned the following:
    Error=0
    error_text=successful
    version=2.0
    aicc_data=
    [Core]
    Student_ID=josky.jara
    Student_Name=Jara, Josky
    Lesson_location=
    path=
    Credit=credit
    Lesson_status=I,A
    Score=
    Time=73:09:13
    Lesson_Mode=Normal
    [Core_Lesson]
    TSF=0_2_0_1lsi_42_42_cuc2_0_0_0_0_0_0_0_; MVA=00000000000000; UPF=12_2_0_1_0_1_1; sSkew=0; ATS1=fvvv; LastTopic=en_US_20811_Assmt1.nlo; MP=80; PC=48; DOWNLOAD=0; LastPage=-1;
    [Core_Vendor]
    [Student_Data]
    Mastery_Score=80
    Error: java.lang.ThreadDeath: null
    java.lang.ThreadDeath
         at java.lang.Thread.stop(Unknown Source)
         at java.lang.ThreadGroup.stopOrSuspend(Unknown Source)
         at java.lang.ThreadGroup.stop(Unknown Source)
         at sun.awt.AppContext.dispose(Unknown Source)
         at sun.applet.AppletClassLoader.release(Unknown Source)
         at sun.plugin.security.PluginClassLoader.release(Unknown Source)
         at sun.applet.AppletPanel.release(Unknown Source)
         at sun.applet.AppletPanel.sendEvent(Unknown Source)
         at sun.plugin.AppletViewer.onPrivateClose(Unknown Source)
         at sun.plugin.AppletViewer$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    loading copyright notices
    loading copyright notices
    loading copyright notices
    Copyrights for NLO /skillb/en_US_20811/en_US_20811.nlo:
    Copyright � 2004 Thomson NETg, a division of Thomson Learning, Inc.
    All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, broadcasting, or by any information storage and retrieval system, without permission in writing from Thomson NETg.
    Skill Builder is a registered trademark of Thomson NETg. All other trademarks referenced are the trademark, service mark, or registered trademark of their respective holders. Thomson NETg is not affiliated with any company or any other product or vendor mentioned in this course and its accompanying materials.
    Cisco Systems is a registered trademark of Cisco Systems, Inc. Cisco IOS is a trademark of Cisco Systems, Inc. Novell and Netware are registered trademarks of Novell, Inc.
    The software and technology used to implement this course contain trade secrets that Thomson NETg considers to be confidential and proprietary information, and your right to use this material is subject to the restrictions in the license agreement under which you obtained it.
    Companies, names, products, and data used in the examples in this course are fictitious. Any resemblance to existing companies, persons, or products is coincidental and unintentional.
    Versions for NLO /skillb/en_US_20811/en_US_20811.nlo:
    BuilderVersion=Builder Version: GenNLO 3.6.2.32
    BuildDate=Build Date: 05-Jul-2004
    TemplateVersion=Template Version: 20030630
    ContentVersion=Content Version: 20811-0406-10
    SrcOrigRelease=Original Release: <200407051839>
    SrcCurRelease=Current Release: <200407051839>
    SrcPrevRelease=Previous Release: <>
    SrcNlo=Source Nlo: <>
    LocalOrigRelease=Local Original Release: <>
    LocalCurRelease=Local Current Release: <>
    LocalPrevRelease=Local Previous Release: <>
    PandoraVersion=Pandora Version: 1.2.0.0
    PandoraBuildDate=Build Date: 09-Jul-2004
    RSObjective not found.
    bUseUserDir = false
    vars.netgIniFile set to "C:\Documents and Settings\All Users\Application Data\NETg/netg.ini"
    In DisplayViewSettings...
    curMode = -1
    In preferences, audioinstalled = 1
    no UserLinkBox
    Setting default font size to 12
    could someone give me a hand?

    Try a security/authentication forum. This isn't a VM issue.
    Sorry.

  • Cleanup of ISA rules in ISA server 2004 and 2006

    Hi Team
    how could i know, which rules are actively working and which rules are not being used in ISA server 2004 and 2006 . based on this we are going to disable the rule initially and delete the rules which is currently not being used in later stage. since we have
    lot rules in ISA , we need to segregate this 
    Could you please able to help me

    Hi,
    Please check the Creating Custom Reports parts in the following blog to see whether it can help you.
    Logging and Reporting in ISA Server 2006
    http://www.isaserver.org/articles-tutorials/configuration-general/Logging-Reporting-ISA-Server-2006.html
    Note:
    Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce

  • Outlook through ISA Server 2004

    Hello.. I am new in this forums, about this topic...
    The problem is... I have the new Imac with System Operative 10.7.3...
    I need the software office 2011 download outlook emails from an ISA Server 2004 .. I managed to navigate with the safari, but the outlook does not download emails ...
    Beforehand ... Mil Gracias who answers me ...
    German Ardila.

    Hi,
    Firstly, would you mind to post the result of running “ipconfig/all” at the command prompt?
    Please make sure that your network driver is compatible and maybe you can update or uninstall your network driver to see if the issue persists.
    Best regards,
    Susie

  • Behind ISA Server 2004 Error in applet

    Hi there,
    If i enter a particular website i am getting the following error:
    Error: 'idEditbox' is not defined
    If i enter the website when i am not behind the ISA Server 2004 i'm not getting any errors.
    Does anyone knows how this problem can be solved?
    OS: WindowsXP SP2
    Java version: Java(TM) Plug-in 1.4.2_03
    Best Regards,
    Ferdi

    My first thought would be to discuss the problem with the people who maintain that ISA server. From painful personal experience I know that it can be configured in more ways than any sane person could possibly desire.

  • Quicktime - New Video Recording using Canon HV30 - Codec?

    I'm using Quicktime Pro 7.4.1 with a Canon HV30 connected via firewire. In Quicktime preferences pane, the HV30 is the video source with "Device Native" as the Quality setting. Though, I can't see a preview in the Quicktime window while recording, it does appear to record footage. When I stop the recording, it says that I don't have the codec to view the footage and sends me to the Quicktime plug-in page on this site, but I have no idea what I need.
    Considering some of the codecs (if not all of them) cost money, I'd rather not buy something that won't fix my problem. Anyone have any ideas?
    EDIT: Oh yeah, the camera is set to HDV 1080i60 video standard. When I switch the camera to SDV, the Quicktime preview returns and everything works as expected.
    Message was edited by: Robbie Schneider

    a2043 wrote:
    When I try to start a new video recording I receive the following error:
    The operation couldn’t be completed. (OSStatus error -536870206.)
    I am using Quicktime Pro on an iMac running Mac OS X 10.6.5. Quicktime will work with iSight but not with my PS3 eye (usb webcam). I am able to choose the PS3 eye from Quicktime preferences and the video screen will show up with video from the PS3 eye (so I know that Quicktime recognizes the cam). But the error dialogue box appears immediately.
    Other information - I am using macam.component for Quicktime and the PS3 eye works perfectly with Macam.
    Welcome to Discussions, a2043
    Has anyone received this error before?
    I have not, but I do not use PS3 eye. If it is a "UVC" (usb video class) device, it should work with any Mac running Mac OS X 10.4.9 or later _without additional software drivers_. Some unnecessary drivers can conflict with your Mac's software.
    If desired, you can remove the file macam.component from /Library/QuickTime and restart Mac to see if the PS3 eye can work with QuickTime without the additional driver.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • How to use rtmp video streaming using wowza server in iOS?

    I was trying to implement video chat ios application i want to use wowza server. I worked on http streaming and its working but, i need live chat so i need to use rtmp.
    Can any one help me to have sample code to stream vedio from wowza local server using rtmp protocol
    or any tutorials..

    You can add "hint" tracks via AppleScript (download the collection):
    http://www.apple.com/applescript/quicktime/
    Of course, these only run on a Mac.
    You may have other issues with formatting and should check the FAQ page at the QTSS Site.

  • ISA Server 2004 Connection Problem

    Hi all,
    I have a problem on my isa server , 
    I need to Disable and Enable WAN card every day to get the internet connection , and I Still connected all the day , after get back to home and at the next day , I need to disable and Enable WAN to go online .
    I need your help to solve this issue please .
    thanks in advance 

    Hi,
    Firstly, would you mind to post the result of running “ipconfig/all” at the command prompt?
    Please make sure that your network driver is compatible and maybe you can update or uninstall your network driver to see if the issue persists.
    Best regards,
    Susie

  • Publishing a video podcast using a server that is not a .MAC Account

    Ok. So I created my own video on my Final Cut Pro. I'd like to publish it to the iTunes Store, but it's asking me for a URL that contains an RSS feed. I don't have a .Mac account but I do have my own with another company. What do I need to do in order to get the url and rss feed and while I use my own server?

    For the RSS feed see Apples notes:
    http://www.apple.com/itunes/store/podcaststechspecs.html
    There is not reason why you shouldn't host the podcast and its RSS file on any server, provided that the server is configured to handle the file format: some aren't where video is concerned and the result is a garbage text file. You need to check this with your ISP.
    That done all you need to do is give the iTunes store the URL of the RSS file, which contains the UTRL of the podcast (so you don't need to give iTunes the podcast URTL separately).

  • Video recording using the built in iSight camera on a MacBook Pro

    Hello,
    Where do I find directions to record video using the built in iSight camera on a MacBook Pro?
    Thank you,
    Deb

    Hi macosxlover,
    Those are the instructions.
    Open iMovie
    Move the slider to the camera (use it as a drop down if more than one cam is available)
    Press the record button to add the video feed as a clip.
    Edit as required.
    12:00 AM Monday; June 12, 2006

  • Weird screen artifacts replaying video recorded using Camtasia

    I record a screencast using Camtasia using the default Techsmith Screen Codec 2 codec and it plays back in Windows Media Player just fine. I can also drag it into Sony Vegas and edit it just fine. When I drag it into Premiere Pro CC I can replay it, but it doesn't render right. There is a weird problem with things like dialog boxes where only parts of the dialog show at any given time and tend to be revealed as the mouse is moved around. Here's an image...
    It looks like keyframe issue to me. Anyone know what's going on?

    Certainly Camtasia can export .mp4 files, but I'm recording directly to .avi using my choice of codec. Rendering video out of Camtasia would add an additional (and very long) step to the process and would also reduce quality by compressing twice. I wouldn't think that Premiere Pro would need to necessarily "support" a codec. If a system has a codec and is capable of compressing and decompressing to and from it, then I would expect a program like Premiere to just work. The other video editing software packages work with it.

  • SharePoint 2010 and ISA server proxy - Any step by step documentation to do this?

    Hi there,
    I know that ISA is deprecated - still for next few months we still need to use it. 
    I will appreciate if you could please share any document on how to have a SharePoint 2010 Intranet Web Application available on Internet using ISA server proxy.
    Thank you so much.

    Hi,
    here you are
    http://blogs.technet.com/b/paulpaa/archive/2009/09/23/steps-to-publish-sharepoint-sites-created-in-host-header-mode-hh-mode-with-isa-server-2006.aspx
    http://serverfault.com/questions/174061/how-to-configure-aams-in-sp-2010-to-work-with-isa-2006-and-kerberos-authenticati
    http://www.benjaminathawes.com/2010/08/22/publishing-sharepoint-2010-with-isa-server-2006-sp1/
    http://www.isaserver.org/articles-tutorials/publishing/How-to-Publish-Microsoft-Sharepoint-Service-ISA-Server-2006.html
    http://technet.microsoft.com/library/bb794854.aspx#SecureWebPublishing
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • ISA server 2006 OS Support Information (Product ID: 78984-270-4276405-04003)

    1.       We are using ISA server 2006 in Window server 2003RS SP2 OS and we are upgrading our OS form 2003 to 2012 standred Edt. 64bit.
    So ISA server Compatible with 2012 standred Edt. 64bit
    2.       If it is not compatible with it then share the upgradation process of ISA server which is compatible with server 2012 standred Edt. 64bit.

    HI
    ISA is not supported on 2012 Server, You need to switch to TMG or UAG.
    Also
    Windows 2012 has a new feature called  Remote Access role service in Windows Server® 2012 R2  which can be used to publish website.
    If you want full fuctions of ISA then upgrade to TMG or UAG

  • ISA Server, mail.app / mobileme

    Is there anyway possible to get OSX working properly behind my works network, which uses ISA Server.
    MobileMe will not sync, Apple Mail app will not connect to IMAP... to name a few, but those are the most important to me.
    Stuff like Software Update works.
    Any suggestions?

    Hmmm, not sure what is going on, but from the Mail log, neither of those IPs have a name associated with them, 1st one is in Netherlands, 2nd one is iin Africa!???
    Any idea why it'd be looking those up?
    I wonder if your Facebook account has been hacked, or See if you might have this malware redirecting DNS queries...
    http://macmegasite.com/node/3924
    http://www.ehow.com/how_2128387_remove-osxrspluga-trojan-horse-mac.html
    How to fix...
    http://www.macosxhints.com/article.php?story=20071031114140862
    Known DNSChanger address ranges. Source: dcwg.org
    http://krebsonsecurity.com/2012/03/court-4-more-months-for-dnschanger-infected-p cs/

  • Corporate email - gateway for ISA Server or PPTP or equivalent needed.

    My IT guy told me that our companys VPN uses ISA Server and/or PPTP for the gateway. I haven't been able to set up my corporate email because none of the gateways on my 8520 seem to work. All I do on my PC is provide an IP address, domainname, user and password and I'm in. How can I configure this on my Curve 8520? Is there a "generic" gateway available to download?
    TIA

    Thanks, now I understand why the wifi keeps dropping. On my personal wireless network, it also seems the distance from the access point is not good compared to my laptop. At work our network & exchange teams don't seem to have the desire to struggle with this "toy" until customers start forcing its adoption. I am using OWA and it works fine over EDGE. I will share your posting with them.
    Thank you again.
    Dell   Windows XP Pro

Maybe you are looking for