Publishing PC Suite 6.84 via Group Policy

Hi,
I'm trying to roll out PC Suite 6.84 to all of our domain users. However the install keeps failing. I extracted the PC Suite.msi, PCCS.msi & Nokia_Connectivity_cable_driver.msi from the exe install package. I then initially added just the PC Suite.msi to a group policy software install to see if it would install, however this failed, when I looked at the error it said it required the Cable Drivers & Connectivity Solution software to be installed first, so I added these to the same group policy, and reboot the machine again, but this install then failed with an error saying the installation source could not be found, the exact error is below.
Event Type: Error
Event Source: Application Management
Event Category: None
Event ID: 102
Description:
The install of application PC Connectivity Solution from policy Nokia Phone Software failed. The error was : The installation source for this product is not available. Verify that the source exists and that you can access it.
Can anyone suggest why this error is occuring? I can access the install point from the machine, its not a mapped drive, but a full UNC path (\\server\installs\nokiapcsuite), and I've rolled out hundreds of MSI applications in this way in the past (Acrobat Reader, Java, Flash etc) all working without issue. According to the installation guide for admin, it is possible to deploy the software via active directory!
Many thanks
Ben

Thanks for this.
These are the steps I had tried coutless times over the last three days or so - always came back to the same problem.
I have now found the solution, and got my phone installed, but no thanks to Nokia Technical Support - it was due to a post on a message board at
/discussions/board/message?board.id=pcsuite&message.id=16290#Ma61290.
Basically, the Nokia Uninstall software (or the PC Suite cleaner software) does not go far enough. In particular, it needs to delete any keys in the Registry under Local_Machine\System\CurrentControlSet\services that include nmwcd in their name - there were 4 in my Registry. These relate to the USB drivers for the generic phone, phone parent and modem. Curently, these have to be deleted manually.
Without these deleted, Windows rightly thinks that the phone alreday exists, because these Registry keys say it is. This is not a Windows problem (as the Nokia Tech Support people via Nokia Customer Care UK insisted to me twice), it is a Nokia problem. Their uninstall/cleaner software is not good enough when you have to install a new version of PC Suite and it needs sorting PDQ, as I and loads of others (as is evident from the message boards) have the same problem.
neil

Similar Messages

Updating Existing Install and adding extensions via Group Policy

We have recently installed StarOffice 8 due a full planned move away from Microsoft Office 2003, we have deployed the CD install via group policy to test the functionality of StarOffice in a school environment. Due to a problem cropping images in Writer (cropooo 0.2.1 extension needed) we are having to update to the latest patch ver10 (300+pc's). Is there a way to automate this via GPO? We only have the standard version of staroffice 8 and not the enterprise CD so we can not make a custom transform file. Also can extensions be deployed via Group Policy? We are runnning a Windows 2k3 server with XP clients.

Network Deployment of Adobe Flash Player
I found this link http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
It is a good idea to extract the msi the deployment data point using msiexec /a {filename} (this creates an administrative installer)
Use the extracted MSI to deploy flash. (either assigned or published)
Please make sure that the user can read from the data point you place the files.

Force UAC on via Group Policy

I have looked all around but have not really found a solution to this problem. How do I lock UAC on via Group Policy so that no one can change it except via Group Policy and all the settings
are greyed out even for administrators? I just want it on the default settings and left alone. If I wanted to do something similar for Windows Firewall or Internet Explorer settings, it seems easy, but UAC seems to be different. Unfortunately I have situations
at clients where this setup is necessary and unavoidable.

Hi,
This can be done via Local Group Policy or via Active Directory-based GPO, which is much more suited for large networks where one would like to disable UAC for many computers at once.
If using Local Group Policy you'll need to open the Group Policy Editor (Start > Run > gpedit.msc) from your computer.
If using in AD-based GPO, open Group Policy Management Console (Start > Run > gpmc.msc) from a Vista computer that is a member of the domain. In the GPMC window, browse to the required GPO that is linked to the OU or domain where the Vista computers
are located, then edit it.
1.In the Group Policy Editor window, browse to Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options.
2.In the right pane scroll to find the User Access Control policies (they're down at the bottom of the window). You need to configure the following policies:
User Account Control: Behavior of the elevation prompt for……
User Account Control: Detect application installations and……
User Account Control: Run all administrators in Admin App……
3.You'll need to reboot your computers.
There is a detial Microsoft official website on Configuring UAC via Group Policy：
UAC Group Policy Settings and Registry Key Settings
http://technet.microsoft.com/en-us/library/dd835564(WS.10).aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Install Flash player via group policy

How can I install flash player and shockwave via group policy
on a windows 2003 domain?

Network Deployment of Adobe Flash Player
I found this link http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
It is a good idea to extract the msi the deployment data point using msiexec /a {filename} (this creates an administrative installer)
Use the extracted MSI to deploy flash. (either assigned or published)
Please make sure that the user can read from the data point you place the files.

Install Contribute CS4 via Group Policy?

Hi,
We have just purchased some copies of Contribute CS4 and I need to deploy them via a Group Policy. Normally, I will do this with the MSI that has already been created by the manufacturer and do an administrative install (msiexec /a <productname>.msi) but there is only a WinBootstrapper.msi file for Contribute CS4.
Can anyone share with me how they have installed Contribute CS4 via Group Policy?
Thanks.
Pete.

Network Deployment of Adobe Flash Player
I found this link http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
It is a good idea to extract the msi the deployment data point using msiexec /a {filename} (this creates an administrative installer)
Use the extracted MSI to deploy flash. (either assigned or published)
Please make sure that the user can read from the data point you place the files.

RDS 2012 R2 - How do I lockdown access to Local Computer Management and Windows Backup via Group Policy

Greetings all,
I am needing assistance in how to lockdown access to Local Computer Management and Windows Backup via Group Policy for users that access RDS service. I have followed this awesome guide - h t t p://w w w.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
- but it is missing two important resources that I would like to lock down.Currently, I have successfully locked down Control Panel for users via Group Policy, but I cannot find any group policy or guide on how to restrict user access
to Computer Management (different to Server Manager). When using Win-X shortcut to open the 'Administrator's shortcuts' near the windows icon, I have locked down everything except Computer Management. Computer Management gives direct access to Disk Management,
Shares etc, which are locked down for users. But Windows Server Backup is still accessible. Can someone please guide me on how to restrict access to both Computer Management and Windows Server Backup.
Thanks in advance.
Terry.

Prevent running of Windows Server Backup
Computer Configuration\Policies\Windows Settings\Security Settings\File System
Right click on File System - Add File - Drill down to \System32\wbadmin.msc
On the Database Security ACL that pops up - Remove Creator Owner, Remove Users and check Adminstrators have Full Access.
On the Object window - choose Propagate inheritable permissions to all... (Default)

Installing Flash Player V 10.2.153.1 Via Group Policy

Recently i tried to upgrade our existing flash player V10.2.152.32, to V 10.2.153.1 Via Group Policy.
But the group policy keep failing, during the investigation phase i have enabled logging to try to troubleshoot the installation steps, and possibly find a solution, but so far am clueless on a solution. I have included the installation log please help.
=== Logging started: 11/04/2011 15:29:46 ===
Action start 15:29:46: INSTALL.
Action start 15:29:46: ISSetAllUsers.
InstallShield 15:29:46: Begin SetAllUsers()
InstallShield 15:29:46: Getting records from Upgrade table
InstallShield 15:29:46: UpgradeCode: {42463807-970B-4257-BC95-5C348D61DF1C}    MinVersion: 6.0.0.0    MaxVersion: 10.2.153.1    Language:     Attributes: 769
InstallShield 15:29:46: Checking related product {148D9D03-5D23-4D4F-B5D0-BA6030C45DCF}
InstallShield 15:29:46:     Adobe Flash Player 10 ActiveX    {148D9D03-5D23-4D4F-B5D0-BA6030C45DCF}    1033         ***Related***
InstallShield 15:29:46: ALLUSERS of related product {148D9D03-5D23-4D4F-B5D0-BA6030C45DCF} is = 1
InstallShield 15:29:46: End SetAllUsers()
Action ended 15:29:46: ISSetAllUsers. Return value 1.
Action start 15:29:46: AppSearch.
Action ended 15:29:46: AppSearch. Return value 0.
Action start 15:29:46: LaunchConditions.
Action ended 15:29:46: LaunchConditions. Return value 1.
Action start 15:29:46: SetupInitialization.
Info 2898.For Tahoma8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Info 2898.For TahomaBold10 textstyle, the system created a 'Tahoma' font, in 0 character set.
Action ended 15:29:46: SetupInitialization. Return value 1.
Action start 15:29:46: FindRelatedProducts.
Action ended 15:29:46: FindRelatedProducts. Return value 1.
Action start 15:29:46: ValidateProductID.
Action ended 15:29:46: ValidateProductID. Return value 1.
Action start 15:29:46: CostInitialize.
Action ended 15:29:46: CostInitialize. Return value 1.
Action start 15:29:46: FileCost.
Action ended 15:29:46: FileCost. Return value 1.
Action start 15:29:46: IsolateComponents.
Action ended 15:29:46: IsolateComponents. Return value 0.
Action start 15:29:46: setUserProfileNT.
Action ended 15:29:46: setUserProfileNT. Return value 1.
Action start 15:29:46: setAllUsersProfile2K.
Action ended 15:29:46: setAllUsersProfile2K. Return value 1.
Action start 15:29:46: ResolveSource.
Action ended 15:29:46: ResolveSource. Return value 1.
Action start 15:29:46: CostFinalize.
Action ended 15:29:46: CostFinalize. Return value 1.
Action start 15:29:46: MigrateFeatureStates.
Action ended 15:29:46: MigrateFeatureStates. Return value 1.
Action start 15:29:46: InstallWelcome.
Action ended 15:29:48: InstallWelcome. Return value 1.
Action start 15:29:48: SetupProgress.
Info 2898.For MSSansBold8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Info 2898.For MSSWhiteSerif8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Action ended 15:29:48: SetupProgress. Return value 1.
Action start 15:29:48: ExecuteAction.
Action start 15:29:49: INSTALL.
Action start 15:29:49: ISSetAllUsers.
Action ended 15:29:49: ISSetAllUsers. Return value 0.
Action start 15:29:49: AppSearch.
Action ended 15:29:49: AppSearch. Return value 0.
Action start 15:29:49: LaunchConditions.
Action ended 15:29:49: LaunchConditions. Return value 1.
Action start 15:29:49: FindRelatedProducts.
Action ended 15:29:49: FindRelatedProducts. Return value 0.
Action start 15:29:49: ValidateProductID.
Action ended 15:29:49: ValidateProductID. Return value 1.
Action start 15:29:49: CostInitialize.
Action ended 15:29:49: CostInitialize. Return value 1.
Action start 15:29:49: FileCost.
Action ended 15:29:49: FileCost. Return value 1.
Action start 15:29:49: IsolateComponents.
Action ended 15:29:49: IsolateComponents. Return value 0.
Action start 15:29:49: CostFinalize.
Action ended 15:29:49: CostFinalize. Return value 1.
Action start 15:29:49: SetARPINSTALLLOCATION.
Action ended 15:29:49: SetARPINSTALLLOCATION. Return value 1.
Action start 15:29:49: SetODBCFolders.
Action ended 15:29:49: SetODBCFolders. Return value 0.
Action start 15:29:49: MigrateFeatureStates.
Action ended 15:29:49: MigrateFeatureStates. Return value 0.
Action start 15:29:49: InstallValidate.
Action ended 15:29:49: InstallValidate. Return value 1.
Action start 15:29:49: RemoveExistingProducts.
Action start 15:29:49: INSTALL.
Action start 15:29:49: ISSetAllUsers.
InstallShield 15:29:49: Begin SetAllUsers()
InstallShield 15:29:49: Getting records from Upgrade table
InstallShield 15:29:49: UpgradeCode: {42463807-970B-4257-BC95-5C348D61DF1C}    MinVersion: 6.0.0.0    MaxVersion: 10.1.102.64    Language:     Attributes: 769
InstallShield 15:29:49: Checking related product {148D9D03-5D23-4D4F-B5D0-BA6030C45DCF}
InstallShield 15:29:49:     Adobe Flash Player 10 ActiveX    {148D9D03-5D23-4D4F-B5D0-BA6030C45DCF}    1033         ***Related***
InstallShield 15:29:49: ALLUSERS of related product {148D9D03-5D23-4D4F-B5D0-BA6030C45DCF} is = 1
InstallShield 15:29:49: End SetAllUsers()
Action ended 15:29:49: ISSetAllUsers. Return value 1.
Action start 15:29:49: AppSearch.
Action ended 15:29:49: AppSearch. Return value 0.
Action start 15:29:49: LaunchConditions.
Action ended 15:29:49: LaunchConditions. Return value 1.
Action start 15:29:49: FindRelatedProducts.
Action ended 15:29:49: FindRelatedProducts. Return value 1.
Action start 15:29:49: ValidateProductID.
Action ended 15:29:49: ValidateProductID. Return value 1.
Action start 15:29:49: CostInitialize.
Action ended 15:29:49: CostInitialize. Return value 1.
Action start 15:29:49: FileCost.
Action ended 15:29:49: FileCost. Return value 1.
Action start 15:29:49: IsolateComponents.
Action ended 15:29:49: IsolateComponents. Return value 0.
Action start 15:29:49: CostFinalize.
Action ended 15:29:49: CostFinalize. Return value 1.
Action start 15:29:49: SetARPINSTALLLOCATION.
Action ended 15:29:49: SetARPINSTALLLOCATION. Return value 1.
Action start 15:29:49: SetODBCFolders.
Action ended 15:29:49: SetODBCFolders. Return value 0.
Action start 15:29:49: MigrateFeatureStates.
Action ended 15:29:49: MigrateFeatureStates. Return value 0.
Action start 15:29:49: InstallValidate.
Action ended 15:29:49: InstallValidate. Return value 1.
Action start 15:29:49: RemoveExistingProducts.
Action ended 15:29:49: RemoveExistingProducts. Return value 0.
Action start 15:29:49: InstallInitialize.
Action ended 15:29:54: InstallInitialize. Return value 1.
Action start 15:29:54: CallExeUninstaller.
Action ended 15:29:54: CallExeUninstaller. Return value 1.
Action start 15:29:54: MakePropsAvailable.
Action ended 15:29:54: MakePropsAvailable. Return value 1.
Action start 15:29:54: AllocateRegistrySpace.
Action ended 15:29:54: AllocateRegistrySpace. Return value 1.
Action start 15:29:54: ProcessComponents.
Action ended 15:29:54: ProcessComponents. Return value 1.
Action start 15:29:54: UnpublishComponents.
Action ended 15:29:54: UnpublishComponents. Return value 0.
Action start 15:29:54: UnpublishFeatures.
Action ended 15:29:54: UnpublishFeatures. Return value 1.
Action start 15:29:54: StopServices.
Action ended 15:29:54: StopServices. Return value 1.
Action start 15:29:54: DeleteServices.
Action ended 15:29:54: DeleteServices. Return value 1.
Action start 15:29:54: UnregisterComPlus.
Action ended 15:29:54: SelfUnregModules. Return value 1.
Action start 15:29:54: SelfUnregModules.
Action ended 15:29:54: SelfUnregModules. Return value 1.
Action start 15:29:54: UnregisterTypeLibraries.
Action ended 15:29:54: UnregisterTypeLibraries. Return value 0.
Action start 15:29:54: RemoveODBC.
Action ended 15:29:54: RemoveODBC. Return value 1.
Action start 15:29:54: UnregisterFonts.
Action ended 15:29:54: UnregisterFonts. Return value 1.
Action start 15:29:54: RemoveRegistryValues.
Action ended 15:29:54: RemoveRegistryValues. Return value 1.
Action start 15:29:54: UnregisterClassInfo.
Action ended 15:29:54: UnregisterClassInfo. Return value 0.
Action start 15:29:54: UnregisterExtensionInfo.
Action ended 15:29:54: UnregisterExtensionInfo. Return value 0.
Action start 15:29:54: UnregisterProgIdInfo.
Action ended 15:29:54: UnregisterProgIdInfo. Return value 0.
Action start 15:29:54: UnregisterMIMEInfo.
     7 Action ended 15:29:54: RemoveIniValues. Return value 1 Action start 15:29:54: RemoveShortcuts.
Action ended 15:29:54: RemoveIniValues. Return value 1.
Action start 15:29:54: RemoveShortcuts.
Action ended 15:29:54: RemoveShortcuts. Return value 0.
Action start 15:29:54: RemoveEnvironmentStrings.
Action ended 15:29:54: RemoveEnvironmentStrings. Return value 1.
Action start 15:29:54: RemoveDuplicateFiles.
Action ended 15:29:54: RemoveDuplicateFiles. Return value 1.
Action start 15:29:54: RemoveFolders.
Action ended 15:29:54: RemoveFolders. Return value 1.
Action start 15:29:54: CreateFolders.
Action ended 15:29:54: CreateFolders. Return value 1.
Action start 15:29:54: MoveFiles.
   tion ended 15:29:54: MoveFiles. Return value 1.
Action start 15:29:54: InstallFiles.
Action ended 15:29:54: InstallFiles. Return value 1.
Action start 15:29:54: NewCustomAction1.
Info 2835.The control ErrorIcon was not found on dialog SetupError.
Error 2753.The File 'InstallAX.exe' is not marked for installation.
MSI (s) (3C:70) [15:29:56:473]: Product: Adobe Flash Player 10 ActiveX -- Error 2753.The File 'InstallAX.exe' is not marked for installation.
Action ended 15:29:56: NewCustomAction1. Return value 3.
Action ended 15:29:56: INSTALL. Return value 3.
Action ended 15:29:56: RemoveExistingProducts. Return value 3.
Action ended 15:29:56: INSTALL. Return value 3.
Action ended 15:29:56: ExecuteAction. Return value 3.
Action start 15:29:56: SetupCompleteError.
Action ended 15:29:57: SetupCompleteError. Return value 2.
Action ended 15:29:57: INSTALL. Return value 3.
=== Logging stopped: 11/04/2011 15:29:57 ===
MSI (c) (40:60) [15:29:57:692]: Product: Adobe Flash Player 10 ActiveX -- Installation operation failed.
MSI (c) (40:60) [15:29:57:692]: Windows Installer installed the product. Product Name: Adobe Flash Player 10 ActiveX. Product Version: 10.2.153.1. Product Language: 1033. Installation success or error status: 1603.
========================================================================================== ========================
Please note that i have unloaded the antivirus and conducted the installation with no luck.

Today i have tried installing flash manually via the web interface that worked fine. im not sure now if the MSI file provided by adobe is faulty. can someone please explain.
Manuall install is not a solution for me as i have over 300 machine that i need to deploy flash to.

Automatic Windows Update via Group Policy in Windows 8

Hi,
I have created a new GPO to place some settings on the Automatic Update to all my client pcs. The settings applied as the image i uploaded below. The problem is that this GPO were successfully applied to all my Windows 7 machine but not Windows 8.1 machines.
Is there anything that i missed or i should know about Windows 8.1 automatic update configuration via Group Policy?. I've tried to google but cant find any guidance that relates. I'm not using WSUS. Appreciates any advise. Thanks.
Cheers, Sparcx [MCTS,MCITP-EA]

Hi Leon, yes i have read the blog that you gave, It says that Windows 8 requires a KB update to roll the changes that will solve this issue. However its also said that the update is included in Windows 8.1 and there's no need to update to solve the Automatic
Update behaviour via Group Policy as mentioned. Also tried to apply the KB update suggested, but failed. It is not for Windows 8.1 platform. Is there any other suggestion? I kinda stuck here..
Cheers, Sparcx [MCTS,MCITP-EA]

How to control IE10's "Compatibility View settings" via Group Policy

First
of all thanks for taking the time to read this. I must let you know that I have limited experience with Group Policy so here it goes...
Domain Controllers are 2008 R2 Datacenter and client computers are Win7 Pro with IE10
I need to add several sites to the "Compatibility View settings" in IE10 and have these pushed out via Group Policy.
I followed this to enable the "Use Policy List of Internet Explorer 7 sites:"
Use
Policy List of Internet Explorer 7 sites
I even added the settings to both User Configuration as well as Computer Configuration. However the computers on the domain wouldn't show these sites in
IE even after forcing a GP update (gpupdate /force)
Yes I did use top level domain names.
Next I installed the Administrative Templates for Windows Internet Explorer 10 on the DC:
Administrative Templates for Windows Internet Explorer 10
this gave me an Inetres.adm file while I put in the same location as my other .adm files that Group Policy Manager sees (located at C:\Windows\SYSVOL\domain\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Adm)
I do see a bunch of .ADMX files located at C:\Windows\PolicyDefinitions
on the DC. I also see a lot of .ADML files located at C:\Windows\PolicyDefinitions\en-US.
Where is my Central Store located that my Group Policy references? How do I know what location GP is reading from?
Now I installed the Administrative Templates (ADMX) for Windows Server 2008 R2 and Windows 7 from here:
Administrative Templates (ADMX) for Windows Server 2008 R2 and
Windows 7
This gave me a "Win7-2008R2-admx.msi" package that I installed. I took the defaults and extracted contents to:
C:\Windows\PolicyDefinitions\Server 2008 Win7\PolicyDefinitions
Are all of these .ADMX files supposed to be placed into my Central Store?
If I mouse-over "Administrative Templates" in Group Policy Manager is says that the policy definitions are retrieved from the local machine.
I then right-clicked on top of "Administrative
Templates" in Group Policy Manager and highlighted Inetres and selected Delete.
While in Add/Remove Templates I click on Add and it defaults to looking for "Policy Templates" and will not let me select and .ADM/.ADML/.ADMX files.
What am I doing wrong here?
How do I know that I'm using the most recent Inetres file?
How do I know which file Group Policy Manager is using to manage the IE settings that are in:
User Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of Internet
Explorer 7 sites
or
Computer Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of
Internet Explorer 7 sites.
Is there anything else you can suggest?
Many, many thanks in advance for any response

Hi,
Regarding your question, usually we create a Central Store for Administrative Templates (Both .admx and .adml files), and create a folder that is named PolicyDefinitions in the following location:
\\FQDN\SYSVOL\FQDN\policies. The .adml files on the Windows computer
are stored in a language-specific folder. For example, English (United States) .adml files are stored in a folder that is named "en-US." When you have copied all .admx and .adml files, the PolicyDefinitions folder on the domain controller should contain the
.admx files and one or more folders that contain language-specific .adml files.
Please refer to the following articles. You will get more helpful details about the Central Store for Group Policy Administrative Template files.
How to create the Central Store for Group Policy Administrative Template files in Windows Vista
http://support.microsoft.com/kb/929841
Windows 7, Windows Server 2008 R2 and the Group Policy Central Store
http://blogs.technet.com/b/askds/archive/2009/12/09/windows-7-windows-server-2008-r2-and-the-group-policy-central-store.aspx
Based on your description, I understand you enable the setting “Use Policy List of Internet Explorer 7 sites”. However, didn’t show any sites in IE in client even after forcing a GP update
(gpupdate /force). Please use command “gpresult” in clients to collect the GPOs, and then check whether the GPO contain the setting “Use Policy List of Internet Explorer 7 sites” was applied to clients or wasn’t.
In addition, you also can change the related setting by using registry directly.
Follow the path of the registry:
HKEY_CURRENT_USER->Software->Policies->Microsoft->Internet Explorer->BrowserEmulation->PolicyList. (Create registry folders
manually if not present)
Right Click
PolicyList ->New->String Value->Enter the name of the website. (Both under ‘Name’ and ‘Data’. For example,
Value name: example.com Value data: example.com)
There is a similar question, please read as a reference.
Add manually URL on Compatibility View List in IE10
http://social.msdn.microsoft.com/Forums/ie/en-US/5a15e861-d106-471e-a968-fdea15e31c45/add-manually-url-on-compatibility-view-list-in-ie10
Hope this helps.
Best regards,
Justin Gu

Is there a way to deploy Adobe Air package via Group Policy or SCCM?

Is there a way to deploy Adobe Air package via Group Policy or SCCM?

hi,
I guess you can try the following options
Remove the all the entry from the TOC of your project or create a new blank TOC and select that while AIR file generation
Remove the all the entry from the index of your project or create a new blank index and select that while AIR file generation
Remove the all the entry from the glossary of your project or create a new blank glossary file and select that while AIR file generation
THis will ensure that TOC/Index/Glossary page is not shown,
There is no way to hide Favorite or RSS from the AIR Help. Again, you can try looking at the Unipane Template provided in the AIR SSL Dialog.
Hope this helps
-Praful Jain

Can Adobe Air 3.1 be deployed via Group Policy?

I am looking for a definitive answer as to whether or not Adobe Air 3.1 can be deployed via Group Policy? I've found material on the web that is very contradictory. Can it be done and if so how? I can't find any solid instructions on how to deploy this application and need to have it installed on about 60 desktops.
We are trying to deploy the Salesforce.com Desktop Chatter application. Any helpful info is greatly appreciated.
Thanks!

Hi Kevin,
I replied via email yesterday, but in case anyone else is following along here's what I said:
For GPO deployment, we don't officially "support" it (ie. we don't test for it internally), however I did run across this recent post where an admin had success.
http://www.appdeploy.com/packages/detail.asp?id=2339
Hope this helps,
Chris

Disable Private Browsing via Group policy

We are a medium sized business using Firefox 27.0.1. I have been looking for a way to control private browsing via group policy for a while but there are no clear answers on how a system administrator can do this without a convoluted process of editing files that can't be found anywhere on a computer.
Our environment:
windows 2008 DC
using group policy
500 users, all windows
Do not use any proxy or L7 filtering
I've looked into using the adm file that is available from the link below. I've sifted through the code and followed instructions for the lockdown process for Computer and User configuration; however, nothing works.
http://4sysops.com/archives/group-policy-for-firefox-and-chrome/#download-the-adm-files
If someone can point me to a registry entry or a vbs file that can be used as a start up script, it would be greatly appreciated by myself and all the system administrators of the world that are trying to decrease private browsing in organizations.
Between the 3 major browsers we are using on our Windows platform (IE, Chrome Firefox); Firefox seems to be a challenge to control. I have been successful in controlling settings via group policy for the other two. I'm working on a cumulative step by step document for this and will share with the world when I am able to configure Firefox.

Thanks for those suggestions; however, they don't help sysadmins that already have the non-enterprise version in their environment. From what I gather, there really isn't a straightforward way of doing this via group policy in a Windows environment without first removing the app and then deploying it with customizations (using tools suggested).
I guess I'll go with the answer "No, there isn't a straighforward way of controlling Firefox through Group policy".

How to deploy a file on all users C drive via group policy

I'm trying to deploy a file on all users C drive via group policy but its not working. logon script is already kept in place but nothing is happening. If I run the same command from my pc it's working fine. Does any one have good script to copy & deploy
the file. Pls help

Hi,
You can use Group Policy Preferences to deploy this and Item-level-Targetting to filter by OUs/groups, wmi filters ,etc.
Computer Configuration / User Configuration - Preferences - Windows Settings - Files
More on this here.
http://technet.microsoft.com/en-us/library/cc772536.aspx
Hope this helps.
Regards,
Calin

StarOffice 8 Distribution via Group Policy

I am the technology coordinator for a small high school. We will be installing StarOffice 8 on all of our XP computers (about 200). Is there an administrative toolkit that I could download that would allow me to distribute StarOffice via Group Policy? I saw that there is possibly one available for the Enterprise version, but we do not have that, we have the educational version. If there is an administrative toolkit available, please let me know where I may download it. I appreciate any assistance anyone can offer! Thanks!

Hi,
there is some guidance here for your scenario:
http://technet.microsoft.com/en-us/library/ff602181.aspx
Did you follow these steps above?
When you mention "it does not work", what is happening? Do you see an error in the logs?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Block USB drive via Group Policy but keyboard, mouse, printers will work

Hi
We are using Windows Server 2008 R2 Std Edition and on clinet XP SP2
We want to block USB Storage via Group Policy and allow Keyboard and mouse to work.
Any suggestion will appreciate.
regards
Arvind
Arvind

Hi,
In 2008 you can use the below GPO.
User Configuration \ Administrative Templates \ System \ Removable Storage Access \ All Removable Storage classes: Deny all access.
Force a Restart to Ensure Removable Storage Access Policy is Enforced
http://technet.microsoft.com/en-us/library/cc771896(v=WS.10).aspx
Deny All Access to Removable Devices or Media
http://technet.microsoft.com/en-us/library/cc772540(v=WS.10).aspx
For "legacy" clients:
http://support.microsoft.com/kb/555324
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Publishing PC Suite 6.84 via Group Policy

Similar Messages

Maybe you are looking for