Publishing Podcast Results Zero Enhancements

I'm using Garageband '08. I started a new podcast episode and added chapters, artwork, and links to go along with my music.
Here's my problem:
When I go to Share -> +Export Podcast To Disk...+, everything exports as usual, but when I open the file in Quicktime or iTunes, none of the enhancements that I added show up.
Yes, the Podcast Track is shown before I export it, and yes I am exporting with the AAC encoder.
I even tried starting from scratch on a new episode. When I exported that, I still got an non-enhanced m4a file.

I have fixed this problem: It turns out that Garageband was outputting an enhanced AAC file, however I had on my computer a broken installation of Quicktime. Re-installing Quicktime solved the problem.

Similar Messages

Updating podcasts results in iTunes freezing

Updating podcasts results in iTunes freezing
iTunes works until it searches for new podcasts and then it stops working and shows the spinning beachball of death.
I am running 11.0.2 and it started immediately after installing it.
I have reinstalled itunes numerous times.
I am running 10.8.3
Help

Well if the content is split over two different folders it can't also be in the same one. There must be some kind of semantic difference between the two, e.g. different non-printing characters...
tt2

Problem in publishing datamining results in OracleBI discoverer

Hi all,
I'm working with oracle dataminer 10.2 and I need to publish datamining results in oracleBI discoverer 10.1.2.I have registered the Oracle Data Miner Discoverer Gateway in the EUL.
The problem is that "Publish to Discoverer menu" doesn't appear in the" Publish pull-down menu" in oracle dataminer.
My question is: this problem has happened because I didn't install Patch 4430506 for OracleBI Discoverer Administrator ?
If it's the case, Does anyone have the patch 4430506? I can not download this patch, since I have no metalink account. Could anyone help me this patch? If possible, please send this patch to my email: [email protected]
Thanks much

Hi,
That looks like a patch for 10.1.2.
If you are using 10.2, I would think the patch would be unnecessary.
For more information on Discoverer, you should query their forum:
Discoverer
Thanks, mark

Full-text search in published project finding zero results for multiple-word entries

[RH10, IE10, Windows 7]
I manage a large WebHelp project that has produced correct search results in the past. At some point the search function stopped finding results for entries of more than one word. For example, it won't find any results for "project plan" even though searching for either "project" or "plan" separately will correctly return results including the numerous pages containing either "plan project" or "project plan".
TCS support is having a look at the files. So far we have found that this occurs under Google Chrome as well as IE 10, and also that the same error occurs if we publish to FlashHelp.
BTW, I have another similarly configured project that does not display this error.
I was hoping someone might have encountered this and can suggest a fix.
Alberti

Hi Rick,
We do have baggage files of all sorts but in this project they are excluded from search.
At one point in this project Search failed completely; the Search pane came up blank after generating. I was advised by a TCS support person that PDF baggage files (and not just “errant” ones!) will kill the search function (hmmm…) and must be excluded from search (in the WebHelp layout properties). That proved to be right and fixed the problem. Search worked fine for a while until I observed this new thing.To be extra-cautious I have excluded ALL baggage files from Search, at least until we can eliminate whatever this new issue is.

Error Publishing Podcast to ITunes using IWeb

I am getting the following error publishing my podcast to Itunes using Iweb.
We had difficulty reading this feed. Bad http result code: 500
When I checked the rss.xml doc that iweb generates, it is very different from what itunes gives as an example. Do you guys plan on making your software match to the Itunes requirements so that it will post. I can edit and upload the xml file, but when iweb publishes again it will simply change it back to the wrong file.
Is there an update coming? What should I do?

Thanks for the suggestion. It seems that from GarageBand the only podcast option is to send it to iWeb. The option exists: "send song" to iTunes, but not "send podcast" directly to iTunes. I don't know if there's a meaningful difference between "song" and "podcast," but I've decided to wait.
I contacted Apple (apparently I haven't yet exhausted my free tech-support options since the purchase of this MacBookPro) and was told that the problem is most likely with iTunes. We'll see what the iTunes team has to say...
Further info I've learned: the audio podcast episode somehow got converted to a ".mov" file somewhere along it's path from being created in GarageBand to it's submission to iTunes. This is still a mystery to me as I specifically chose "MP3" when sending the episode from GarageBand to iWeb. Apple tech-support has passed me along the chain to the iTunes folks who only do tech support via email. So we'll see...

Podcast showing zero episodes in iTunes

I have a podcast feed (being created with the Blubrry Powerpress plugin for Wordpress) that is showing zero episodes in iTunes, despite the fact that it's a valid RSS feed. The feed can be found here: http://podcast.christnc.com/feed/podcast/
I also tried doing publishing this feed (http://christnc.com/category/podcast/feed/), which worked for a short time, but then showed zero episodes as well. Can anyone spot the problem?

I'm not sure how well iTunes copes with 301 redirects - I've see it both work and not work. The correct procedure is detailed here:
http://www.apple.com/itunes/podcasts/specs.html#changing
but this requires you to be able to add a tag to the feed. As iTunes evidently isn't able to read the feed this isn't going to work. I think all you can do is try the redirect and see what happens: this is the problem with services like Blogger, in that you have no control over the feed or its URL.
You can check the feed which is being used by iTunes by subscribing (from the 'Subscribe Free' button on the Store page) and then going to the 'Podcasts' section in the iTunes sidebar and control-clicking (Mac) or right-clicking (Windows) the podcast line (not that for an episode) and choosing 'Copy podcast URL'.

'Hiding' a (published) podcast until a future publication date

I have a valid XML feed.
How do I 'hide' items from view until a date in the future?
I have <pubDate>Tue, 10 Jul 2007 12:00:00 -0700</pubDate>
set for example, but the podcast still shows up as available now.
How can I publish but not make an item available/visible until a date in the future?
Thanks!
G5 DP 2 GHz Mac OS X (10.4.10) No Haxies; permissions frequently repaired etc

Roger,
I assume that you want it to become available at a specific time because you aren't able to upload it at that time, so you want to pre-upload it?
Exactly
I have infinite control over when - just that it's a podcast with more than a dozen episodes, each one of which needs to become available/visible at intervals of a week.
I suppose I'll just have to do a lot of pasting... write the whole file with all its <item>s and add them each week?
Thanks!
G5 DP 2 GHz Mac OS X (10.4.10) No Haxies; permissions frequently repaired etc

Submitting podcast results in "network connection has reset" error

Hello,
I've been attempting for the past few days to submit my podcast RSS feed to iTunes. Each time I try, it loads for about a minute before giving me an error message: "We could not complete your iTunes Store request. The network connection was reset." Based on other potential solutions I read, I tried disabling my firewall/antivirus software, using a different RSS feed, and having someone else try to submit it, all with the same result. Are there any other solutions that may help me submit the podcast?

I was able to subscribe manually to the feed at http://mixcloud-rss.georgipavlov.com/popunmuted/mp3/20 in iTunes and download the latest episodes, so there is no obvious problem. It has been known for a server to fail to respond properly to a request from the Store when it's OK with the iTunes application or a browser, so I can only suggest that this might be the issue and you should query it with the people running your server.

Do you have any idea, why I can see only 15 episodes of my 59 published podcasts?

I need your help...
I`ve already published 59 podcasts (TomsTalkTime - DER Erfolgspodcast), but my audience can only see the last 15 episodes published in iTunes. Why is that? Can anyone help me?
Thank you so much for your help.
Best
Tom
https://itunes.apple.com/de/podcast/tomstalktime-der-erfolgspodcast/id575416240? mt=2

For reference, your feed is at http://erfolg.podomatic.com/rss2.xml
The 15 episodes which appear in the Store and when subscribing are what is in the feed. The usual explanation for this is that the method used to create your podcast - in this case Podomatic - limits the number of episodes shown in the feed, moving older ones to an archive page and out of the feed. There is usually a setting to increase this number, though I can't advise on Podomatic.

WMI Query to SCCM 2012 results zero results in c#

In 2007 this works without issues, however in 2012 when attempting the 2nd query it returns zero results. However if I do this manually I can produce results...Here is my code:
using (WqlConnectionManager connection = Connect(getServer))
   string query = "select * from SMS_ObjectContainerItem WHERE ContainerNodeID='" + ProfileID + "'";
   foreach (IResultObject getobject in connection.QueryProcessor.ExecuteQuery(query))
     getPackageID = getobject["InstanceKey"].StringValue;
     query = "select * from SMS_Collection WHERE CollectionID='" + getPackageID + "'";
**This is where it will return zero results**
     foreach (IResultObject searchID in connection.QueryProcessor.ExecuteQuery(query))
        CMProfiles profile = new CMProfiles();
        profile.Name = searchID["Name"].StringValue;
        profile.ID = getPackageID;
        results.Add(profile);
I'm pulling my hairs trying to understand by the 2nd query is not returning any results. When this works fine in SCCM 2007

What you are using here are the SDK libraries, which are admittedly very thin wrappers around WMI, but not quite. Have you tried implementing this directly using WMI? I have written software that manipulates 2007 / 2012 and eventually found that
the SDK libraries just sort of got in my way, so now I do all of my interactions with SCCM directly with WMI and forgoe the SDK libraries.
Before I changed over, I did find that there are some oddities in using the SDK. What I eventually found that worked for me was to bind to the 2007 SDK libraries, deliver them with my application and use the 2007 libraries regardless of if I was connecting
to 2007 or 2012. What I found was that I would run into issues using the 2012 libraries to talk to 2007, but the 2007 libraries would work fine with both.
I have tested your queries, directly using WMI and PowerShell on a 2012 server and they work fine. I am presuming that the folder that you are attempting to access is a Device Collection folder.
Once again, I would suggest using WMI directly, especially if making a product that will work with 2007 and 2012; you will be a much happier person.
It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link.

Photos Missing from Published Podcast

I am attempting to publish my podcast using Garageband 3.0.2 and iWeb 1.1.1. Everything EXCEPT the podcast track is publishing. I've tried it twice. When I review prior to publishing, the photos in the podcast track all work perfectly. However, when I publish, it the episode artwork is all that I see.
Thanks in advance for your help.

This is the GarageBand 1 forum and GarageBand 1 doesn't have any podcasting features. I'd suggest you post this in the GB3 forum where you're more likely to get help from someone that knows about GB3's podcasting features.

Publishing podcasts with Leopard Server

I like how the Leopard Blog tool allows me to quickly and easily publish a podcast series and hides the process of creating the RSS feed from my low tech users. However, I do not see a GUI provided for managing the Podcast Series description, only the episode title and description. Once I subscribe to a podcast in iTunes the default series description is
"This is a podcast for Users/<user name>. If I submit the users podcast series to iTunes, this unhelpful description will be visible to subscribers. Is there a way with the current GUI to change this description? if not, it seems I'll have to edit the rss feed for every user after every new episode published?

Now I have discovered, the RSS feed is not in a location I can find. When I check the url for the subscribe in itunes, I get:
itpc://domian/username/blog/index.its
This URL does not help me find the index.its file which I would like to manually edit to add a podcast description. Any idea how to find it?
Keith

IWEB publishing PODCAST.. There's a problem

There's a problem with iWEB
1) I made my podcasts in iWEB
2) I published them to web.me.com
3) It worked very fine. I can see them all in my page.
4) BUT
5) I made other pages in iWEB ex) BLOG
6) I published them (I did not edited or touched podcast pages)
7) It worked fine.
8) BUT when I click my podcast, I can see just texts without podcast content.
I can't see podcast movie clips
9) So, I tried to publish whole pages. Then I can see my podcast.
10) That's my problem.
11) When I publish my iWEB pages to my site,
12) I should include podcast pages to publish ( even though I didn't touched those pages.)
13) Publish Whole Sites / or / Include podcast pages in Publishing ( It's bothering me everytime
I can't figure out this problem.
Is there someone can solve this problem?

try duplicating the podcast page - or cut and create a new page - and see if that remedies the situation

Publishing Podcasts

I uploaded a podcast in garageband and when I try and publish it to my website there is an error saying...
"PUBLISH ERROR. Can't create the file "Darkroom_Spotlight.jpg. The disk may be damaged or full, or you may not have sufficient access privilages."
How do I get around this and publish my website???

Try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Unable to publish podcast from the Philippines

I am new in Podcasting and would like to submit mine. Can anyone help me publish my podcast. I've tried everything but I could'nt publish mine from the Philippines.
http://www.inquirer.com.ph/podcast/pdi_rss.xml
Thanks for the help. Greatly appreciated.

I already set the author tags and include a valid email address. I also checked my inbox and asked our network admin on the spam collector for any feed but i have'nt receive anything yet.
if you don't mind can i asked you again to resubmit our feed, I already add a new episode both on the original and new filename.
for your reference here's the url:
http://www.inquirer.com.ph/podcast/pdi_rss.xml - orginal filename
http://www.inquirer.com.ph/podcast/pdifeeds.xml - new file
again, thank you for your patience and kind assistance.

Publishing Podcast Results Zero Enhancements

Similar Messages

Maybe you are looking for