Publishing point is not starting in the windows media server

In the setup VCS expressway starter pack is used as call controller & the endpoints are registered to it. TCS is used for recording. A existing publishing point is used for live streaming using windows media server. This publishing point is not started when the recording starts for this recording alias. Windows media server is running locally in the TCS. I could see the below in the server logs. Please note that this setup has worked with this configuration for more than a year and it stopped working now. Your help on this greatly appreciated. Thanks.
13   2015-05-05T14:15:55+03:00   Info: Incoming call [address = 1000, address_type = CALLADDRESS_E164_ALIAS, call_id = 1, protocol = H323, rate = 5952]
14   2015-05-05T14:15:55+03:00   Info: Getting conference binding [booking_address = 003] - No binding found, proceeding with ad hoc call
15   2015-05-05T14:15:55+03:00   Info: Checking recording start time [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , record_delay = off]
16   2015-05-05T14:15:55+03:00   Info: Creating recording [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = ]
17   2015-05-05T14:15:55+03:00   Info: Handling RTP packet [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , time_since_first_packet = 1907] - Started writing media
18   2015-05-05T14:15:55+03:00   Info: Creating call [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, remote_address = 5001]
19   2015-05-05T14:15:55+03:00   Info: Updating temp RTP filename in DB [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, temp_rtp_dump_file = e:\livedata\RTP150505141555_1.ogg.tmp]
20   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
21   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
22   2015-05-05T14:15:56+03:00   Diagnostic: Setting playback main video frame rate [frame_rate = 30]
23   2015-05-05T14:15:56+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 128, channel = audio, payload_type = AAC-LD]
24   2015-05-05T14:15:57+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 4000, channel = video, payload_type = H.264]
25   2015-05-05T14:15:57+03:00   Info: Decoding video, Message from decoder [call_id = 1, decoder = Codian Video, message = Initialized H.264 decoder]
26   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
27   2015-05-05T14:15:57+03:00   Info: Finding output size; bucketing [optimal_output_size = 1280x720(16:9), output_bucket = 796x448, size_ext = 1280x720(16:9), size_main = 512x288(16:9), squared_ext = 1280x720(16:9), squared_main = 512x288(16:9)]
28   2015-05-05T14:15:57+03:00   Info: Transcode settings [extended_frame_rate = 0, extended_size = 1280x720(16:9), layout = 2, main_frame_rate = 0, main_height_ratio = 0, main_size = 512x288(16:9), negotiated_bitrate_kbps = 4128, output_bitrate_kbps = 800, output_frame_rate = 30, output_frame_rate_max = 30, output_size = 796x448(199:112), quality = 2, quality_bitrate_kbps = 800]
29   2015-05-05T14:15:57+03:00   Info: Setting up encoding [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, template = <transcode conference_id="904e92bb-9152-4ced-bf29-165f521e34b2" thumbnail_path="E:\data\www\slides\904e92bb-9152-4ced-bf29-165f521e34b2\thumbnails\"><clips action="transcode"/><metadata name="mxe-unicast" speaker="" copyright="" keywords="" description="" date="1430824555"/><writer source="pipnopip"><template codec="windowsMedia" delivery="DELIVERY_ON_DEMAND" qualitybitrateK="800" layout="pipnopip" piplocation="top/right" quality="Medium"/><output type="file" guid="e1ab0747-bbb4-44f0-b7de-2644e3921e63" directory="E:\data\media\"/><output multicast="false" multicast_address="" multicast_port_start="0" multicast_ttl="0" type="serverpush" guid="e952a7fc-87dc-4944-b26a-064c9897c3de" wwwdir="E:\data\www\" server_name="xxx.xxx.xxx.xxx" username="admin" password="********" port="8080" publishing_point_copy="" publishing_point=""/></writer><callinfo bitrateK="4128" hasaudio="true" hasextended="true" hasvideo="true" videoFrames="0" extendedFrames="0" duration="0" mainres="512x288" maindar="16:9" extres="1280x720" extdar="16:9"/></transcode>]
30   2015-05-05T14:15:57+03:00   Diagnostic: Setting thumbnail timer zero point [call_id = 1, zero_point = 0]
31   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
32   2015-05-05T14:15:57+03:00   Info: Decoding audio, Message from decoder [call_id = 1, decoder = Codian Audio, message = Initialized AAC-LD decoder 128000bps]
33   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
34   2015-05-05T14:15:58+03:00   Last message repeated 5 times
35   2015-05-05T14:15:58+03:00   Info: Setting output path [call_id = 1, path = e:\livedata\143082455700-82801609.wmv]
36   2015-05-05T14:15:58+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
37   2015-05-05T14:16:04+03:00   Last message repeated 25 times
38   2015-05-05T14:16:04+03:00   Info: Checking memory use [private_MB = 460, private_MB_previous = 118, ram_free_MB = 3245, vm_used_MB = 597, vm_used_MB_previous = 201, working_set_MB = 184]
39   2015-05-05T14:16:08+03:00   Warning: Reporting Windows Media writer status, Error occurred in WMT_ERROR [call_id = 1, address = http://xxx.xxx.xxx.xxx:8080/_3868463432921, error = error code = (0x80072eef)]
40   2015-05-05T14:16:08+03:00   Info: Adding Windows Media serverpush output [call_id = 1, async = 0x80072eef] - After wait

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

DataSocket Server will not start when the Launch DS Server if Local URL.VI is bundled into a LabVIEW application.

I want to run a LabVIEW application on several machines remotely that do not have LabVIEW installed (licensing issues). Hence I have built a LabVIEW executable with the RunTime Engine to install on all of these remote machines.
The VI has a bi-directional link, using Datasockets, to a machine with DAQ and Image acquisition functions. It primarily receives data items, but also the capability to change data items so it needs to run the "Launch DS Server if Local URL.VI" in order to publish data to the DataSocket server.
When I run the pre-built VI on a machine that has LabVIEW Developers Edition installed, everything works fine - ie.
the DataSocket server starts on the remote machine. However when I build the *.exe application and run it on a machine with and without LabVIEW Developers Edition installed the VI successfully subscribes to the DAQ and Image Acquisiton machine, but it does not start its own connection to the Data Socket server, and hence does not publish the data that the DAQ machine needs to suscribe to. IT seems that the Launch DS Server if Local URL.VI is bypassed? I have fiddled around with the Build settings but to no avail.
In short, how do I get the DataSocket Server to run in a LabVIEW executable? Is it indeed possible? Any advice would be welcomed.
When distributing a Labview Application (*.exe) with Data Socket Server Publish functionality, the DataSocket server does not start and hence no data can be sent by the Remote PC to the Server. The VI successfully retrieves data from the DS Server. I have used the "Launch DS Server if Local URL.vi" in the ditributed application but for some r
eason this VI is not executed when I run the executable. How can you force the DataSocket Server to run with executable LabVIEW applications?

Ryan,
How to add Datasocket Server Control.vi?
Source Files only show Project Files.
So, I added Datasocket Server Control.vi file to the project first.
Then I added it to Always Included < Source Files < Application Properties (Build Executable).
Last, I built the Executable, but it didn't work.
Can you help me.
Thank you.
Pedro Raposo

Database not starting automatically at window 2000 server

hay
how r u people
i have very urgent problme
we have install oracle 8i database on window 200 server family .
now the problem is this that the database is not automatically starting when the computer boots up and we will have to do it manually
will some on help me
thanks for co-operation
kamran ahmed

Hi Kamran,
Mere Bhai mein bhi bara khuwar hoa hoon is chakkar mein.
check karo agar tumhara server domain par hai to us ko workgroup par le aao.
Masla hal ho jaye gaa.
Bye.
Syed Ammad Grami.
[email protected]

Windows media server 0xc00d138d error code

0xc00d138d
I am getting the following error code when I play a stream from windows media player to the windows media server.
What does 138d error code correspond to?
I could not find any answers here
http://msdn.microsoft.com/en-in/library/bb202810.aspx
How to resolve this error

0xC00D138D
NS_E_NAMESPACE_NODE_NOT_FOUND
The specified namespace node could not be found.
0xC00D138DL
AnnounceToNSCFile was
called before Announce was
called.
I found this at http://msdn.microsoft.com/en-in/library/cc704587.aspx
What could cause this?

Windows XP could not start because the following file is missing or corrupt - message

Hi there and apologies in advance if this is a daft or very frequently asked question.
Upon trying to boot up this Toshiba mini NB200 device last night we got this message:
Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. it then asked me to press r at the forst screen to start a repair if I have the original set up cd.
The device had to be forced to shutdown previously as it hung when shutting down.
Now multiple reboots (including uncoupling/recoupling the battery) and resetting the settings from start up menu result in the same error message.
The device has no cd drive installed but previously Jerry Lippey (in 2011) saved the day by recommending purchase of a product recovery disc (R10804EN) after a 'flashing cursor issue' at logon.
Has anyone far more clever than I any thoughts (if we're able to borrow a portable cd drive) whether this disc may work again?
Windows XP was/is preinstalled on the PC (we havent the disc) and we've subsequently added MS Works. A total wipe of the device (as long as XP remains?) wont be too much hassle as we havent any data that we're too bothered about on it.
Many, many thanks in advance
Solved!
Go to Solution.

Toshiba NB200-11L
Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
Bad news. It means the System hive, which is the most important branch of the registry, is corrupt. Unless you have made provisions for this (we always do on XP systems), the fix is too complex for you to handle (KB307545).
I'm afraid you'll need to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media as you did before. Do you have important files to rescue?
-Jerry

BLACK SCREEN stating "windows could not start because the following is miss

I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck!

Hp mini could not start because the following file is missing or corrupt /windows/system32/hal.dll.

windows could not start because the following file is missing or corrupt <Windows root>\system32\hal.dll.
then it says please re-install a copy of the above file

Any system or sys32 and any .dll files missing or corrupted errors, usually the only fix is to reinstall windows and anything on hard drive not saved on removable drives...flash, usb, cd or floppy is lost. I've had several sys32.dll file missing or corrupted errors and asked at Best Buy Geek Squad what the fix would cost and that's how I learned the only fix is installing windows.

Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll.

Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll. anyone can help

Have a read here http://support.microsoft.com/kb/314477/en-us
Maybe it helps
Stefan

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error Message: "Skype can not start because the system is not available"

Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content.

"Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
Thanks

It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
Any luck?

"Warning : VMName is not supported in the Windows Azure Emulator in role 'WorkerRole1'"

I have a WorkerRole and I am trying to use the vmName attribute is the cscfg file;
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<ServiceConfiguration xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*" serviceName="AzureDeploymentProject">
<Role name="WorkerRole1" vmName="vma">
<Instances count="2"/>
When I run it up with the following ;
"C:\Program Files\Microsoft SDKs\Windows Azure\Emulator\csrun.exe" /run:"C:\Users\john\workspace-azure\AzureRunMeOutside\deploy\WindowsAzurePackage.cspkg";"C:\Users\john\workspace-azure\AzureRunMeOutside\deploy\ServiceConfiguration.cscfg" /usefullemulator
I get the following error;
"Warning : VMName is not supported in the Windows Azure Emulator in role 'WorkerRole1'."
Does this mean that the ComputeEmulator does not support use of the vmName attribute, or am I doing something wrong.

Hi Jambor.
Thanks for the reply.
I am using Compute Emulator 2.3:
c:\Users\john\workspace-azure\AzureRunMeOutside\emulatorTools>"C:\Program Files\Microsoft SDKs\Windows Azure\Emulator\cs
run.exe"
Windows(R) Azure(TM) Desktop Execution Tool version 2.3.0.0
for Microsoft(R) .NET Framework 4.0
Copyright © Microsoft Corporation. All rights reserved.
Use "csrun /?" for command-line syntax.
c:\Users\john\workspace-azure\AzureRunMeOutside\emulatorTools>
and SDK 2.3 and I still get this warning. Am I using the correct namespace/version for the configuration?
xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration"
Where is the vmName registered, and how can I get access to it?
If I use the following, the DNS name is not registered in my standard DNS ( I am using Windows 7 Pro SP1 x64 and the machine is outside a Windows Domain, using a corporate DNS server ). Is there some 'Compute Emulator' DNS that I need to lookup, or do I
have to set the DNS part of the Role Endpoints to point to my local DNS server? In the cloud Azure provides DNS services Azure
Name Resolution (DNS), is there any Compute Emulator equivalent?
private void printOutInterestingInfo()
Tracer.WriteLine("Hostname is " + Dns.GetHostName(), "Information");
foreach (var endpoint in RoleEnvironment.CurrentRoleInstance.InstanceEndpoints)
string variable = endpoint.Key;
string value = endpoint.Value.IPEndpoint.Port.ToString();
string ipAdress = endpoint.Value.IPEndpoint.Address.ToString();
try
IPHostEntry hostEntry = Dns.GetHostEntry(ipAdress);
string machineName = hostEntry.HostName;
Tracer.WriteLine("\tEndpoint "+variable+": Machine name: " + machineName, "Information");
catch(Exception e)
Tracer.WriteLine("\tEndpoint "+variable+": Machine name is not available for ipAdress: "+e, "Information");
Tracer.WriteLine("\tEndpoint "+variable+": IP Address: " + ipAdress, "Information");
Tracer.WriteLine("\tEndpoint " + variable + ": Port: " + endpoint.Value.IPEndpoint.Port, "Information");
foreach (var role in RoleEnvironment.Roles)
foreach (RoleInstance roleInstance in role.Value.Instances)
Tracer.WriteLine("Role: " + roleInstance.Role.Name, "Information");
Tracer.WriteLine("\tInstance: " + roleInstance.Id, "Information");
foreach (RoleInstanceEndpoint roleInstEndpoint in roleInstance.InstanceEndpoints.Values)
Tracer.WriteLine("\t\tInstance endpoint IP address and port: " + roleInstEndpoint.IPEndpoint, "Information");
Information: MU: 2014-09-02 10:36:42Z Hostname is mu
A first chance exception of type 'System.Net.Sockets.SocketException' occurred in System.dll
Information: MU: 2014-09-02 10:36:46Z Endpoint Debugging: Machine name is not available for ipAdress: System.Net.Sockets.SocketException (0x80004005): No such host is known
at System.Net.Dns.InternalGetHostByAddress(IPAddress address, Boolean includeIPv6)
at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
at WorkerRole.RunMe.printOutInterestingInfo() in c:\Users\john\git\AzureRunMe\WorkerRole\RunMe.cs:line 355
Information: MU: 2014-09-02 10:36:46Z Endpoint Debugging: IP Address: 127.255.0.0
Information: MU: 2014-09-02 10:36:46Z Endpoint Debugging: Port: 8091
A first chance exception of type 'System.Net.Sockets.SocketException' occurred in System.dll
Information: MU: 2014-09-02 10:36:51Z Endpoint http: Machine name is not available for ipAdress: System.Net.Sockets.SocketException (0x80004005): No such host is known
at System.Net.Dns.InternalGetHostByAddress(IPAddress address, Boolean includeIPv6)
at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
at WorkerRole.RunMe.printOutInterestingInfo() in c:\Users\john\git\AzureRunMe\WorkerRole\RunMe.cs:line 355
Information: MU: 2014-09-02 10:36:51Z Endpoint http: IP Address: 127.255.0.0
Information: MU: 2014-09-02 10:36:51Z Endpoint http: Port: 81
A first chance exception of type 'System.Net.Sockets.SocketException' occurred in System.dll
Information: MU: 2014-09-02 10:36:55Z Endpoint http-alt: Machine name is not available for ipAdress: System.Net.Sockets.SocketException (0x80004005): No such host is known
at System.Net.Dns.InternalGetHostByAddress(IPAddress address, Boolean includeIPv6)
at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
at WorkerRole.RunMe.printOutInterestingInfo() in c:\Users\john\git\AzureRunMe\WorkerRole\RunMe.cs:line 355
Information: MU: 2014-09-02 10:36:55Z Endpoint http-alt: IP Address: 127.255.0.0
Information: MU: 2014-09-02 10:36:55Z Endpoint http-alt: Port: 8081
The thread 0x2504 has exited with code 259 (0x103).
The thread 0x1728 has exited with code 259 (0x103).
Information: MU: 2014-09-02 10:37:09Z Endpoint telnet: IP Address: 127.255.0.0
Information: MU: 2014-09-02 10:37:09Z Endpoint telnet: Port: 24
Information: MU: 2014-09-02 10:37:09Z Role: WorkerRole
Information: MU: 2014-09-02 10:37:09Z Instance: deployment23(267).AzureRunMe.WorkerRole_IN_0
Information: MU: 2014-09-02 10:37:09Z Instance endpoint IP address and port: 127.255.0.0:8091
Information: MU: 2014-09-02 10:37:09Z Instance endpoint IP address and port: 127.255.0.0:81
Information: MU: 2014-09-02 10:37:09Z Instance endpoint IP address and port: 127.255.0.0:8081
Information: MU: 2014-09-02 10:37:09Z Instance endpoint IP address and port: 127.255.0.0:24
outputs;

Imovie song does not start at the beginning after I edited the duration of the clip

my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.

For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
Select: Block pop-up windows
safari starts always with top page even I have apple.com as a starting window
Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
That icon represents your Bookmarks not history.
To view history, from your Safari menu bar click History > Show History
Or Option + Command + 2 on your keyboard.

Publishing point is not starting in the windows media server

Similar Messages

Maybe you are looking for