Publishing PReq to R3 gets location_not_found error in blocked queue

Hi,
While trying to publish Purchase Req to R3 i get a <location_not_found> error in the blocked queue.
I have checked my settings including forms of address, publication, integration models but it still happens!
When i try to create the PR within R3 it works fine.
Maybe i am missing something.
Would appreciate any assistance.
Thanks,
CY

I have the masterdata in APO as the PR is created in APO with a valid source of supply which is a purchase info record from R3.
As for messages, i checked all the queues in apo and r3 and the appl log but still the only msg was location_not_found!
I can even create the PR in R3 if i don't plan it in apo which means the r3 data is also ok!
Thanks for the reply.

Similar Messages

No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José Espases

Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com

Can't publish my site; keep getting 'Disk Error'

Hi!
After bringing my original site into '08, I can publish the site. Then if I change anything on my blog page or add entry, I get a variety of results. Sometimes it will publish and sometimes I get the message "Disk Error". I've tried starting from my '06 file, updating it and still eventually get this same message. I have run the Disk Utility, pitched the pref file, run Tech Tool Pro and defragged and optimized the hard drive. And then, tried starting from scratch again without being able to publish. I realize that my file is probably damaged, but I want to make sure there is nothing I can do before starting all over on the website since it is large with lots of pix, movies and blogs.
thanks!

Thanks for the sympathy! I do have a question. The damaged file is my primary website. I had separated it from a second website after updating to iWeb 08. The second site publishes fine. I want to keep the URL for the second website exactly as it is because I have forwarding set up with a host other than dotMac. How should I go about setting up a new site?
Thanks for all your help.

I using iWeb 3.03. I'm not able to complete a publish command. I get an error message and a note to try again later. What can I do to find the source of the problem

I am using iWeb 3.03. I have prepared a new website and several pages. Attempts to publish have failed. An error message appears, which I don't understand. The message includes a note that says "try again later." What might I try next to get past this problem?
Duane Fitzgerald

Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
reboot.
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "test" and "test". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
OT

I can not publish my software I get "_An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria."

Error 2
An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria.
Yesterday I could publish, today no code changes, but I get the above error.
Help

Hi El-sid,
So glad that you have solved your issue, and thanks for your sharing.
Have a nice day.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trying to publish to Flickr and get code error 4, document is empty?

Does anyone have a solution to the question?

Suggestions mentioned in this article should help. Error changing modules | Lightroom
~ Arpit

When downloading itunes I get to the bit where it says about product publishing information then I get an error message.

Any ideas on how to complete the download please?

See this support document, iTunes: Resolve USB-related alerts - Apple Support or this one regarding the same error and Windows. iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support

On my facebook games.. i get the error message Blocked Plug In... i updated my version of flash and still nothing

on face book games... i get the message blocked plug in... i updated flash and still block...

This problem is going to be solved in the next 24 hours by adobe

Error in Block step in BPM.

Hi all,
I am getting the error in block step, my design follows like this i defined one transformation before block step, the transformation step will splits the input bunch of records into equal no of record packets and sent to block step.. while defining block step i used foreach mode, in block step we kept one sync send step which will send message and gets response ....
but my block step is getting error once message enters into the block...
Thanks in advance for your valuable suggestions and solutions...
Srinivas

Hello...
>>the transformation step will splits the input bunch of records into equal no of record packets and sent to block step
The transformation splits the message into bunch.. Put the output in a multiline container and use this in the block step...
>>but my block step is getting error once message enters into the block...
What error are you getting??
>>Thanks in advance for your valuable suggestions and solutions...
Great to know that you are happy with the responses from the community member in this forum.. So I wish to point one more thing here.. Some of the recent threads closed by you were having closing comment as solved.. it will be better if you point out the problem and the solution which you have adopted to solve the same, so that other community member having the same problem will get a speedy solution... This is just a suggetsion from my end...
Thanks
Suraj

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

When trying to use Java to scan checks in my financial software I get an error message, "The publisher cannot be verified by a trusted source. Code will be treated as unsigned."

I am trying to scan checks in the USAA.com website and Java is giving me an error message: "The publisher cannot be verified by a trusted source. Code will be treated as unsigned."

Serac wrote:
Hi,
I am occasionally running into an issue where I get the following error:
"The publisher cannot be verified by a trusted source.Code will be treated as unsigned."
I am not sure how to stop getting this error or what the root cause of the issue is.
Any idea what could be causing this? and how I can get rid of it? is this a bug in the JRE?
Thanks,
DeeOn the contrary. It shows that Java takes your security very seriously and it will not allow
hackers to format your hard-disk, get personal data etc.
Google for signed applets.

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

I MOVIE won't let me finalise the project. I am getting an error message saying..The project could not be prepared for publishing because an error occurred. (-50)

I MOVIE won't let me finalise the project. I am getting an error message saying..
The project could not be prepared for publishing because an error occurred. (-50)
Can anyone help please and thank you! :-)

See my suggestion about duplicating the project in this thread:
https://discussions.apple.com/thread/4949234?tstart=0
John

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

Why do I get an error message when trying to publish animate deployment package?

I continually get the following error message every time I try to publish an animate deployment package. I have no idea what Poster3.png is. There is no image in my file with that name. I have tried saving my composition under a new name and it doesn't resolve the issue. I have no idea how to fix this.

You may get this error if you had done the following:
- create a comp and save it
- publish to OEM
- delete the poster in file system
- publish again
Workaround:
Go to the composition click on stage and generate a poster image from the properties panel.
Now publish again.
Let me know if this works.
-Sujai

Publishing PReq to R3 gets location_not_found error in blocked queue

Similar Messages

Maybe you are looking for