Publishing problems in Chrome (37)

I'm having a lot of crazy issues in Chrome 37 that I wasn't having with the same published files yesterday.
I wonder if anyone else is running into this?
Please note:
I already did the fix described here:
Update on Captivate HTML 5 content playback issue in Google Chrome Browser. « Rapid eLearning | Adobe Captivate Blog
I've also tried publishing just as SWF and just as HTML5 and I have the same issues with both.
These issues are non existent on IE.
These files are published via Adobe Connect
Here's what is happening:
- In the publish settings 'auto play' is selected
- The first slide of the project is not loading - only the playbar. You have to hit the play button on the playbar to load the first slide.
- I have a button on the first slide (pauses after 1.5 seconds of the 3 second slide) to start training (go to next slide). This button no longer works.
- Some of the files pause at random spots (although the voice over continues). Hitting the next button on the playbar advances it for a bit and then it stops again. This is not happening with all files.
- I have not changed anything to these published files since yesterday when they were working correctly.
I wonder if it is the new version of Chrome 37 that is causing this and if anyone else is running into these issues.
This is an example of the file where all of these things are happening:
Financial Process Management > Process VAT [Demo]
Thanks for any help you can provide.
Aimee

Update: I deleted all files from Adobe Connect and republished everything.
So far.... knock on wood... everything is working properly.
I'm going to leave this conversation here in case someone runs into the same issues.
The only thing I can figure is something goes wacky when you have published too many versions on Adobe Connect. The very strange thing was that there was not consistency between files or browsers. One day everything worked, the next it was all buggy. I suppose something on the back end of Adobe Connect could have also changed that I k now nothing about.
If it happens again I'll have no choice but to stop using Adobe Connect. I can't test EVERYTHING, EVERY day.
Best,
Aimee

Similar Messages

Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

Hi Goutham,
I am facing the same issue. Please let me know how you have resolved it.

QTVR problem with Chrome

Hello,
I have noticed a problem with QTVR files (interactive panoramas):
- the navigation with mouse doesn't work
- the navigation with arrows keys works
- the navigation with 2 fingers gestures on trackpad works
Curiously, no problem with Chrome for Windows (so far...)
I have also noticed:
- on Windows the QT extension version is 7.7.2
- on OSX QT extension version is 7.7.1 (and it seems that I can't upgrade)
So, is it possible to fix the problem of the mouse?
Thanks.

Hi b noir,
Thanks a lot for your response, but unfortunately your suggestion doesn't solve the issue.
First, it seems that it's not possible to switch Chrome in 32 bits mode.
I tried with Firefox, which presented the same problem, but nothing changed...
Just to sum up things:
MacOSX
- Safari and Opera : no problem
- Chrome and Firefox : mouse problem
Windows
- Safari, Chrome, Firefox, Opera and... IE : no problem!
And just to let you know (nothing to do with the problem): I have a HTML5/CSS3/WebGL versions of the panoramas which work great on any browser on MacOSX/IOS and which don't work on Windows except for Safari...

Publishing Problems - a Solution?

For a long time I'd sympathised with all you people who'd been having publishing nightmares, even though I've been updating pretty much error free since iWeb 1.0
Then last night after updating my blogs and making a few changes, I finally got the dreaded error messages. Tried a few times, got frustrated, and decided to sleep on it.
Same this morning ... grrr ... but then I noticed that my iDisk had failed on auto-synchronisation.
I'd only mounted my iDisk recently to amend my Podcast feed, so on a hunch I unmounted iDisk, rehit the Publish button in iWeb, and holy shmoly – it worked straight off!
I reckon that publishing iWeb kicks off the iDisk auto-sync, and then you've got a conflict with iDisk and .Mac trying to outsync each other.
Anybody else found this? if this solves publishing problems for a few of you then great. If it works for a lot of you, even better. If the majority of you get sorted, then that's a revelation!
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

My message to Apple stated:
"My pages go through the "create" process then start
on the "publishing" process then come back with an
error message that tells me to check my internet
connection (which is fine at 2 different locations. I
spent 13 hours fighting this yesterday. It has
created a major problem for me -- and this just after
I paid an extra hundred dollars to upgrade my
broadband. Your telephone people tell me you're
working on this. Please advise when it will be fixed
so I don't waste another 13 hours today."
Regards,
Richard M.
Richard, thank you for writing this. I would like to know how this all shakes out, and I am glad that it is an Apple server problem and not mine.
Meanwhile, I want to say how helpful it is to have this iWeb forum, and also thank the very generous and thoughtful souls who take the time to help beyond what normally would be expected. Those people know who they are, but I also am grateful to everyone.
For example, I was greatly relieved to read that I was not the only person getting Network Failure messages, since it meant that probably I was not working with a defective application -- one that started out fine but somehow went south on me and would not be replaced by Apple. This may seem a trifling thing to some, but when you are in a spot that you perceive as Hot, assurance from the outside is very much appreciated.
I hope that when you all finish your websites, you post the URL so we can all see it; after all, in a sense we are all comrades in arms (because sometimes it can seem like a war, due to the Fear Factor) and our fates are somehow connected even though we are all so-called strangers.
— Lorna in Southern California

Unexpected Publishing Problems

I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
Please help me!
Ruben
G4 17 inch Powerbook Mac OS X (10.4.5)

Here's the latest...
I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
Wish me luck all. I'll keep you posted.
Ruben

I removed chrome 10 and newly installed FF4 final, and I can't read PDF files within the browser. There was no problem in Chrome.

I removed chrome 10 and newly installed FF4 final, and I can't read PDF files within the browser. There was no problem in Chrome. I can't even see the acrobat reader plugin in the plugins page. Acrobat 10 is already installed in my PC. Every time I try to read a PDF file on the web, FF tries to download it instead.

As recommended above by Bernd Alheit, I posted this on the Adobe Reader forum. There, I received the advice to repair the installation under the help menu, which I did and it fixed the problem.
Similar to your solution but found it's a fix found under "HELP" menu and not Add/Remove.
Thank you.

Publish Problems

More Publish Problems!
Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
Sometimes it works and most of the time it will not publish? What can I do?
Thanks
David
imac G5 and an older G5 + a Powerbook and an iBook Mac OS X (10.4.7)

Oh my god I am not a lunatic idiot after all!
I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
I am currently waiting for Apple Support to " get back to me"
MacBook 1.1 White 1.83ghz iBook 12 iBook 14 Mac OS X (10.4.7) Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

Loading problem in chrome??

HI all,
I have a movie which is loading fine in all browsers except in Chrome??
At the first load not working. After reloading the page it is working fine.
Is there any problem in chrome. How i can overcome.
Plz reply it is urgent. thanks in advance

Google+ pages use an extremely high amount of memory or RAM. Google Chrome also uses an extremely high amount of memory or RAM. Chrome either just handles the large amount better, or it just renders better because both are owned by Google.
I can load more than 5 pages of Google+, but anything higher than that slows down a lot and uses a lot of memory.

Another user with publishing problems -- proof that it is .Mac related

Just before Christmas I started getting the dreaded "Publish Error: There was an error updating .Mac" message every time I published. I read all the previous posts, even the ones dating back to October. I think I can conclusively show that the problem is on the .Mac backend, and not at all on my computer. Here is what I did: first, I created a temporary .Mac account; second, I moved my Domain file for safe keeping and did not replace it; third, I logged into the Guest User account that is now available in Leopard. I then attempted to publish a single page website from iWeb from both my normal login and the guest login to both my normal .mac account and the temporary one. (To switch between .Mac accounts I used the system preferences panel when iWeb was not running). The results are as follows:
.......................Regular .Mac.......Temporary .Mac
Normal Login..Publish Failed......Publish Succeeded
Guest Login.....Publish Failed......Publish Succeeded
This tells me that there is no problem on my computer, or with my network connection, and the problem is squarely on the .Mac side of things.
I sent this message off to the standard help page, and got the standard form letter back. In reply I asked them to reset my .Mac account so it would appear "new". I'll see what they say.
It would be interesting to see how many other people with "publish" problems can repeat this test.
-=[doug]=-

I've done what appears to be the standard littany of things:
1) Confirmed that I am running the latest version of iWeb (2.02) on 10.5.1 (although the problem persists when using my backup of 10.4.10 that includes the ilife update)
2) Changed my .Mac password, even though it was less than 20 characters
3) Published all of my previous website to the temp .mac (in chunks to avoid the space limitations)
4) Successfully published my site to a folder
5) Successfully uploaded that folder to my iDisk
6) Attempted to republish and republish all multiple times
7) Deleted iWeb's plist
8) rebooted
9) logged out and back into my .Mac account
10) confirmed that there is no password protection on my site
11) confirmed that there are no comments on my site
12) deleted assets.[membername].plist from the Domain file
13) Confirmed that my password in Keychain is correct
14) Run Keychain First Aid
15) deleted Sites.RSS from my iDisk
16) deleted the website and index.html from the iDisk
So, I have done a fair amount of ground work here, and am not just spouting off against Apple/.Mac. However, I still claim that the fact that I can successfully publish to a temporary .Mac account while the exact same iWeb content fails when being published to my normal .Mac account implies that there is something wrong with my .Mac account -- it is almost as if Apple is trying to eliminate its paying customers (since there are no problems with the free account).
-=[doug]=-

Navbar not visible in published site using Chrome browser

Hi guys,
This is my first attempt at using iWeb (or building a website) and I'm stuck with the following problem.
I have create a small site and published it to a local folder. Google Chrome is my default browser so when I open the index.html file for the site I am greeted with the homepage but the navbar is missing. If I open the file in Safari everything is fine and the navbar is there as expected.
Is there an easy solution to this issue?
I've done a search on the discussions board but couldn't find anything related so apologies if this has been discussed before and please feel free to direct me to a previous post.
I don't have any experience with coding but I'm willing to learn if this is required and would appreciate if you could give me the idiots guide when making suggestion
Thanks,
Bryan

Hi OT,
The site isn't published online just yet, I have it stored in a folder on my local drive.
I am doing this site to help a family member out as they had a problem with their business site and the previous hosting company that they used seem to have disappeared off the scale of the earth!
It works fine locally when using Safari, just not Chrome. I haven't checked any other browsers yet so I suppose that would tell us more.
Would it make a difference if I were to uploaded it to the host? I don't really want to do that just now as I have put up a simple page stating that the site is down for now with an email link so that people can contact the owner.
If there is a way of doing this and having it hidden I could do that if you explain what to do?

Contribute CS4 and CS5 file transfer (publish) problem on Windows 7 64 bit

Have a problem with Contribute CS5 and CS4 on Windows 7 64 bit where upon editing a webiste for example to add a new page (or edit an existing one) and then clicking on "publish" a blank page appears on the website. To explain this further, If i make the required changes to the page and select the option to publish the file later then the file wirtten to the PC appears to be ok and has all the changes, but as soon as I publish it, only a blank page appears on the web server. ie the upload (ftp) process does happen but the content of the page is being stripped out somewhere during the filt transfer process.
I have editied the same site with CS4 on windows XP without any problems.
Any suggestions would be appreciated
Thank you
Chris

I seem to have solved the issue by downloading this install file
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe
which installs successfully.

Publishing Problem with WTP and Tomcat 5.5

Hello you all,
I've got the problem that my Eclipse does not publish my Hibernate (*.hbm.xml) files.
In the concerning folder, I do only find the .class-files.
We're using Eclipse (3.3.2), Maven 2, Tomcat 5.5
Urgend help is needed as we have to distribute our Software till the end of the week :(
Thanks in advance

I'll try reposting, now that I figured out how to format it:
import java.util.ArrayList;
import java.util.List;
import java.util.concurrent.SynchronousQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
public class ThreadTest {
     private static final int MAX_RUNNABLES = 1;
     private final List<Runnable> runnableBuffer = new ArrayList<Runnable>(MAX_RUNNABLES);
     private final ThreadPoolExecutor myThreadPool =
          new ThreadPoolExecutor(MAX_RUNNABLES,
               MAX_RUNNABLES,
            0L, TimeUnit.SECONDS,
            new SynchronousQueue<Runnable>());
     public ThreadTest() {
        //myThreadPool.prestartAllCoreThreads();
        for (int i=0; i<MAX_RUNNABLES; i++) {
            runnableBuffer.add(new Runnable() {
                public void run() {
    public void start() {
        for (Runnable r : runnableBuffer) {
            System.out.println("corePoolSize: " + myThreadPool.getCorePoolSize());
            System.out.println("maxPoolSize: " + myThreadPool.getMaximumPoolSize());
            System.out.println("poolSize: " + myThreadPool.getPoolSize());
            System.out.println("taskCount: " + myThreadPool.getTaskCount());
            System.out.println("Starting runnable ");
            System.out.println("");
            myThreadPool.execute(r);
        System.out.println("All runnables have started");
    public static void main(String[] args) {
        ThreadTest t = new ThreadTest();
        t.start();
}

Multiple Domain files, Multiple Sites, Publishing Problems

I am frustrated beyond belief. I'm an old hand-coder, coming from BBEdit, but I've been using iWeb almost exclusively since its release, because it really is a great product for quick, easy, stylish designs.
However.... In that year, my collection of sites has grown to 12. Discovering that iWeb becomes a major dog when dealing with that much material, I found and followed the instructions - today - to separate my sites into individual domain files, and edit them individually. iWeb is much snappier and publishing goes much more quickly.
The problem? Well... after editing, "Publish to .Mac" rarely works. Only "Publish All to .Mac" will get the site online (something about an error with the index.html file). But "Publish All to .Mac", I've just discovered, DELETES the other websites that I have previous published. All day I've been doing updates and publishing my sites, only to discover that the uploads have all been wiped out by the most recent one!
I'm a big enough fellow to admit that my knowledge isn't total nor perfect - so please, would someone out there with a better handle on iWeb than I (preferably someone who actually deals with multiple domain files rather than someone who thinks they can guess the problem) please clue me into how we make use of this program non-destructively?
I suppose I could always publish everything to folders and upload it to my iDisk (which itself remains ridiculously slow after how many years now? Sheesh!), but that detracts from the elegance of the .Mac integration, the counter features, - not to mention the little fact that I'm a paying .Mac customer and this darn thing should just work, no?

Mark:
I was where you were also. You should give iWebSites a try. It's to iWeb what iPhoto Library Manager is to iPhoto.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want. Just remember to put a copy of your current Domain.sites file somewhere else on your HD in case the splitting gets messed up. It went very smoothly for me and I now manage 19 or so sites.
Do you Twango?

App-V 5.0 SP2 and Office 2013 Publishing Problem

Hi
I have a big problem with app-v 5.0 and Office 2013, the thing is that I have published it globally to a RDS servers in my farm and I have 4 different configuration xml's to publsih the package. I'm also using app-locker to prevent the users that are not supposed
to have the package doesn't get it published. That is working fine.
The default configuration xml is to publish the package to the computer with Excel, Word, Outlook, Powerpoint, onenote and Publisher and create shortcuts to All Programs.
I have 1 user configuration xml to a group (group 1) that has the default configuration but including 3 shortcuts to the desktop, Excel, Word and Outlook. I have another user configuration xml to group 2 that has all the application and all the shortcuts in
Office 2013 Pro and 4 shortcuts to the desktop. I have 1 user configuration xml for Excel only and another one for Word only.
This has been working well for 2-3 days but now users are getting error "The application failed to launch. The application belongs to a packages or a connection group that is scheduled to be unpublished. Error code: 0xA7E0E502-00000516".
And the Office 2013 is pending to unpublish globally on all servers even though no one has done anything except log in or log out.
What am I doing wrong, there are no connection groups on the app-v server but there where 2 or 3 long time ago and have been deleted.
Kind Regards
Kristján R. Halldórsson
Best Regards Kristjan R. Halldorsson

I ran the get-appvclientconnectiongroup -all on my servers and there where none listed.
I have also enabled the Virtualization Subsystem debuglog on the client and I'm not finding any error that might relate to this problem.
The thing is I had a group policy enabled that said Enable Global Refresh on Logon = true but I changed that to false and published the package again globally and I'm just waiting now to see if the package goes to unpublish state as it did before.
Best Regards Kristjan R. Halldorsson

Application Express 3.1 + BI-Publisher + problem with formating numbers

Hello together!
I use the Oracle BI Publisher Template Builder for Word (10.1.3.4) to generate RTF-Templates. I upload these templates in Oracle Apex (Advanced support-->BI-Publisher/OC4J as print service).
It works well, but I have a problem with formating numbers.
In Template Builder I define following number formats, for example: #.##0 for numbers like 1.454.234 and #.##0,00 for numbers like 54,80
In Template-Builder Preview it looks well.
But whatever I do, in use with Oracle Apex dots and comma are allready interchances in the printout.
That means,
1.454.234 become 1,454,234 in PDF-Report
54,80 become 54.80 in PDF-Report
Other than that, the layout is exactly the same like in Template Builder defined.
What's wrong?
Do I have to change any country parameter?
Juliane

I also had the same problem. I tried with normal formating of 99g99g999d99 instead of ##,##,##0.00 and it has resulted correct way.

Publishing problems in Chrome (37)

Similar Messages

Maybe you are looking for