Publishing Site First Time Question
Hi,
I just got Dreamweaver 8 and have a domain/hosting service
with GoDaddy.. I understand that you can FTP the site using
Dreamweaver by defining the site and moving the folders there with
the blue arrow in the files menu. Sorry for the basic question, but
does this happen immediately if I move my index over? I'm not
exactly sure of the process of it.. This is my first site.. I do
have Dreamweaver experience, but not publishing experience.. Thank
you so much for your help..
> Sorry for the
> basic question, but does this happen immediately if I
move my index over
not sure what you mean-
Yes- if you select a local file, and click PUT, it FTP's the
file to the
remote server. It immediately puts a copy of that file on the
host.
http://help.godaddy.com/article.php?article_id=102&topic_id=80&&
is a link to a pdf file.
Similar Messages
-
Please help me publish for first time
hello. i am a newbie so be patient.
i just made my first site. but i can't figure out how to publish it. when i hit publish, it asks me to sign in by bringing up my system preferences. and nothing will ever happen after signing in.
i did publish to a folder, and was able to see it when iweb directed me directly to it, but i have no idea what the url is, or if this is even right.
please help.
asap.Normally, when entering a password in for the first time, you are asked if you want to add it to your keychain.
There is a "New Password" command under the File menu in Keychain Access, but I don't know how to set it correctly for .mac.
I would suggest that you use the "Keychain First Aid" command in the Keychain Access menu and see if any problems show up.
Beyond that, I'd suggest searching this forum for "log in" or the like. I've seen issues like this mentioned before. Maybe there is a solution that I'm not remember.
kabing -
Inside Back Cover Fold-out (first-time question)
Hello, I have a new project that I will be starting in a couple of weeks in which I will be creating a 150 page booklet. What they are requesting is that the back cover fold out so that a floor plan can fit. What's going to happen is that there will be an ad on the inside back cover but attached and able to fold out will be a floor plan. However, the edge of the Inside Back cover will be perferated so that the floor plan can be torn out, if so desired.
I have created plain, saddle-stich magazines before, but this is my first go at a perfect bound booklet with a fold out like this. So these are my questions.
- Again because this my first time doing this, I was wondering if there is formal name for a back-cover fold out...How is usually referred to?
- They are unsure if the floor plan is going to take up 2 extra folds or 3 folds beyond that back cover...because I am unfamiliar with this process, i don't know if the printer has to set the amount of folds or if I can make it as many as I want depending on how the floor plan fits.
- (this question is about setting up the indesign file)
In normal magazines, the pages are setup in 2-page spreads, with the back cover being by itself. In order to set up this up, (and let's say the floor plan is set to 2 folds beyond the inside back cover), do I just add 2 pages to the right on the second to last page, and 2 pages to the left on the last page (which I know I can do by unchecking "Allow selected spread to shuffle")?
Thanks a lot for any advice, I surely appreciate it.
KdubbieIf your cover is the only thing with a flap/foldout, you can save yourself a whole lot of time by creating a seperate file for the cover. And you can set as many folds as you want, as long as budget isn't an option (folds cost money and using a bigger page size usually affects the cost).
Set up the cover as one sheet with fold lines (setting a slug area is good for this). The folds for your map need to be smaller than the page size. This link might help: http://indesignsecrets.com/amazing-folding-calculator-pdf.php -
24p Advanced on P2/Hard Drive - First Timer Questions
I'm getting ready to edit a project that is going to be shot on a Panasonic HVX 200- onto 8 gig "P2" cards, downloading them on set to a mini mobile editing system to a Digital Hard drive. The production company is going to send me the hard drive. It will apparently be shot 24p advanced. Normally, everything I've worked on for years has been shot on 35mm or 16mm and transferred to beta or Dbeta for me to edit with. I will not be finishing this project - only offlining, but I have some questions:
I can edit 24p Advanced HD with FCP, correct?
Since It's only going to be on a hard drive, should I transfer it to my CalDigit SATA RAID to edit with?
I use an AJA io SDI box and the new JVC flatpanel HD/SD broadcast monitor. Will I be able to output this on my monitor with this setup?
Anything special to look for when outputting 24p EDLs?
Basically, any advice on workflow with this would be greatly appreciated. I'm an old-school, film and Avid convertee and I hope to make a smooth transition to HD.
MacBook Pro, FCP 5.1, AJA io, Caldigit SVRDuo 1.5TB, Lacie Rugged FW Drive Mac OS X (10.4.8) Other Macs/Editing Systems OwnedThe raw P2 files. They're in a folder with the job name. It's listed "Card 1", "Card 2", etc... I'm copying them over as we speak to the RAID.
No no no. STop...stop now. That is NOT what you are supposed to do. You need to import the footage FROM that drive using the P2 IMPORT (or Log and Import...whatever the FCP 6 term for it is)...LEAVE the raw on the Lacie. Importing them converts them to Quicktime files you can edit.
You gotta watch this tutorial before you go ANY further:
http://forums.creativecow.net/cgi-bin/pagewrapper.cgi?forumid=8&page=http://www.creativecow.net/articles/ross_shane/p2workflow/index.html
When I create a Capture Scratch folder, I tend to get several "Capture Scratch" folders inside of that folder (as opposed to having them all in the OMFI folder in the Avid). How do I keep them all organized into one folder (or do I need to do this?)\
Stop thinking in Avid terms now. Get that out of your head.
When you choose the CAPTURE SCRATCH, choose the drive itself. NOT A FOLDER ON THAT DRIVE. This way you'll have all the right folders on the base level of the drive.
How do I keep them all organized into one folder (or do I need to do this?)
Click on Underdog to get to my blog...then click on the DVD on the right hand side. This is my tutorial DVD on how to organize yourself in FCP. FCP does things VERY differently from an Avid, and if you take the Avid approach you'll get lost and burried, FAST. Buy this DVD (shameful plug) and watch it. But watch that tutorial first.
Again, this will be conformed elsewhere, but hopefully, my EDL and ref tape will do the trick.
Get this figured out now. Talk to who is finishing it because this workflow is VERY different from a tape based one. There is no offline, you are cutting at full resolution. There is no conform, as there will be no recapturing of the footage. It is unnecessary. They need to talk to the finishing house now and get this figured out before you do something you shouldn't.
Shane -
I have imported a mix of movie and stills into elements 4 and most are good but some of the stills turn black as soon as they are moved to the sceneline. Any ideas out there please?
Do you mean Premiere Elements 4? PRE has its own forum and it's usually best to ask PRE questionst there, because that's where all the video mavens hang out:
http://forums.adobe.com/community/premiere_elements
Good luck! -
Setting up a cluster for the first time: newbie questions
Any help appreciated with this situation:
I'm trying to set up a cluster for the first time and running into
issues (no big surprise). I'll outline my situation and pose questions
as they arise. If/when I get things to work I'll post a step-by-step
summary of what it took to get a simple cluster going.
Here's what I have:
machines:
1 Windows 2000 machines with WL 6.1
2 RedHat Linux machines with WL 6.1
All machines are on the same Home LAN, can see each other, etc.
IP addresses are:
Windows box: 192.168.1.100
Linux box 1: 192.168.1.102
Linux box 2: 192.168.1.103
servers:
I've set up the Windows machine as my admin server, and set up
a managed server on each Linux machine. I created a cluster that consists
of the 2 Linux machines and deployed the web app and EJB to the cluster.
The Windows machine is acting as a Proxy using ClusterServlet.
The web application has been set as the Default Web Application on the
two Linux machines. All 3 machines are listening on ports 80/443. I also
set up session memory replication through the console.
Application:
I have an application that I package as an EAR file. I'm using it as a
"reference" application designed to mimic a real world app as much as possible.
The EAR file contains a web application that uses Struts. It also consists
of a single Stateless Session Bean. The WAR file and EJB Jar are all
packaged up into the EAR file. I've been able to run this application just
fine on a single managed server on all 3 machines.
The web application works fine, and it can invoke the EJB. I can also
invoke the EJB from Java stand-alone clients. Struts works great. All is
well with the world. Now I'm trying to "cluster-ize" this app using
the environment described above and encountering issues.
I've read the docs and followed the instructions according to the
"Weblogic Bible" book. I can bring up all 3 servers and the Linux
managed servers connect to the cluster just fine. I can also
see the Struts messages in their logs which normally happens and tells me
the webapp is initialized properly. The console tells me that the managed
servers are running. I get no error messages starting up any of the serves.
Here are the problems I am encountering.
When I try to access the Web Application (through a browser on the
Windows machine using http://localhost) I get the following error message:
<Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
x,admin) found no context for "/". This request does not match the context path
for any installed web applications and there is no default web application confi
gured.>
Also, when I try to invoke the EJB through a stand-alone Java client,
I get a JNDI lookup error on the EJB's home interface.
Questions:
Question1: I noticed when setting up the machines that console lets you
define a "Machine" or a "Unix Machine". What's the difference? Should I
define the Linux machines as Unix machines or machines, and what are the
consequences of either choice?
Question2:
I'm not totally clear on how my web.xml should look to set up Struts,
the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
Here is what I had before I tried to cluster and which works fine:
<filter>
<filter-name>MainFilter</filter-name>
<filter-class>com.refapp.servlets.MainFilter</filter-class>
<init-param>
<param-name>myAttribute</param-name>
<param-value>Foo</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>MainFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping
<!-- Struts ActionServlet Configuration -->
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>application</param-name>
<param-value>refappstruts</param-value>
</init-param>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>mapping</param-name>
<param-value>org.apache.struts.action.RequestActionMapping</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.do</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
(I have set up a "dummy" 0-length file called index.do that triggers
Struts to go into its ActionServlet when first accessing the web site).
Here is how I added ClusterServlet to web.xml:
servlet>
<servlet-name>ClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
<load-on-startup>0</load-on-startup>
<init-param>
<param-name>defaultServers</param-name>
<param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
</init-param>
<init-param>
<param-name>DebugConfigInfo</param-name>
<param-value>ON</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>InitServlet</servlet-name>
<url-pattern>/servlet/InitServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.html</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
Clearly there is a problem with the Default Web application not being
seen/mapped properly. Any chances my URL mappings for the filter servlet,
Struts, and ClusterServlet are stepping on each other?
With respect to the EJB, here is what my weblogic-ejb-jar looks like:
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>Hello</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
<stateless-clustering>
<stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
<stateless-bean-load-algorithm>
round-robin
</stateless-bean-load-algorithm>
<stateless-bean-methods-are-idempotent>
true
</stateless-bean-methods-are-idempotent>
</stateless-clustering>
</stateless-session-descriptor>
<jndi-name>Hello.Home</jndi-name>
</weblogic-enterprise-bean>
I run this through ejbc and package everything up into the EAR file.
However, I get a JNDI lookup failure when I try to access the Bean from
a standalone Java client running on the Windows machine.
Here is the jndi.properties file that I am using:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:80
Any ideas what I'm doing wrong here? I can post config.xml also if needed.
Thanks in advance!
Let me try to answer :)....
A1> No need to name diff machines by default weblogic
considers the servers are physically located in diff boxes.
The names are used to differtiate the mang servers which are in
multihomed
Some things to chk
1> Did u targeted the ear file Target as cluster.
2> Can u see on the Admin console that both the man servers
are participated in the cluster( u can see by clicking the monitoring
tab on the Cluster node).
3>Is the URL:PORT for the default web app correct?
the reason: is I dont see the port# on the link u mentioned
4> probably ur ejb might not been deployed on the target thats the
reason u cant access thru java client. If u correct the targets that
will probably fix it.
Hope this helps
Please post the result
Thanks
Sudhir
[email protected] (Chris) wrote in message news:<[email protected]>...
> Any help appreciated with this situation:
> I'm trying to set up a cluster for the first time and running into
> issues (no big surprise). I'll outline my situation and pose questions
> as they arise. If/when I get things to work I'll post a step-by-step
> summary of what it took to get a simple cluster going.
> Here's what I have:
>
> machines:
> 1 Windows 2000 machines with WL 6.1
> 2 RedHat Linux machines with WL 6.1
> All machines are on the same Home LAN, can see each other, etc.
> IP addresses are:
> Windows box: 192.168.1.100
> Linux box 1: 192.168.1.102
> Linux box 2: 192.168.1.103
>
> servers:
> I've set up the Windows machine as my admin server, and set up
> a managed server on each Linux machine. I created a cluster that consists
> of the 2 Linux machines and deployed the web app and EJB to the cluster.
> The Windows machine is acting as a Proxy using ClusterServlet.
> The web application has been set as the Default Web Application on the
> two Linux machines. All 3 machines are listening on ports 80/443. I also
> set up session memory replication through the console.
>
> Application:
> I have an application that I package as an EAR file. I'm using it as a
> "reference" application designed to mimic a real world app as much as possible.
> The EAR file contains a web application that uses Struts. It also consists
> of a single Stateless Session Bean. The WAR file and EJB Jar are all
> packaged up into the EAR file. I've been able to run this application just
> fine on a single managed server on all 3 machines.
> The web application works fine, and it can invoke the EJB. I can also
> invoke the EJB from Java stand-alone clients. Struts works great. All is
> well with the world. Now I'm trying to "cluster-ize" this app using
> the environment described above and encountering issues.
>
> I've read the docs and followed the instructions according to the
> "Weblogic Bible" book. I can bring up all 3 servers and the Linux
> managed servers connect to the cluster just fine. I can also
> see the Struts messages in their logs which normally happens and tells me
> the webapp is initialized properly. The console tells me that the managed
> servers are running. I get no error messages starting up any of the serves.
>
> Here are the problems I am encountering.
>
> When I try to access the Web Application (through a browser on the
> Windows machine using http://localhost) I get the following error message:
>
> <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
> x,admin) found no context for "/". This request does not match the context path
> for any installed web applications and there is no default web application confi
> gured.>
>
> Also, when I try to invoke the EJB through a stand-alone Java client,
> I get a JNDI lookup error on the EJB's home interface.
>
> Questions:
> Question1: I noticed when setting up the machines that console lets you
> define a "Machine" or a "Unix Machine". What's the difference? Should I
> define the Linux machines as Unix machines or machines, and what are the
> consequences of either choice?
>
> Question2:
> I'm not totally clear on how my web.xml should look to set up Struts,
> the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
> Here is what I had before I tried to cluster and which works fine:
>
> <filter>
> <filter-name>MainFilter</filter-name>
> <filter-class>com.refapp.servlets.MainFilter</filter-class>
> <init-param>
> <param-name>myAttribute</param-name>
> <param-value>Foo</param-value>
> </init-param>
> </filter>
>
> <filter-mapping>
> <filter-name>MainFilter</filter-name>
> <url-pattern>/*</url-pattern>
> </filter-mapping
>
>
> <!-- Struts ActionServlet Configuration -->
> <servlet>
> <servlet-name>action</servlet-name>
> <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
>
> <init-param>
> <param-name>application</param-name>
> <param-value>refappstruts</param-value>
> </init-param>
>
> <init-param>
> <param-name>config</param-name>
> <param-value>/WEB-INF/struts-config.xml</param-value>
> </init-param>
>
> <init-param>
> <param-name>debug</param-name>
> <param-value>2</param-value>
> </init-param>
>
> <init-param>
> <param-name>mapping</param-name>
> <param-value>org.apache.struts.action.RequestActionMapping</param-value>
> </init-param>
> <load-on-startup>2</load-on-startup>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <welcome-file-list>
> <welcome-file>index.do</welcome-file>
> <welcome-file>index.jsp</welcome-file>
> <welcome-file>index.html</welcome-file>
> </welcome-file-list>
>
> (I have set up a "dummy" 0-length file called index.do that triggers
> Struts to go into its ActionServlet when first accessing the web site).
>
> Here is how I added ClusterServlet to web.xml:
>
> servlet>
> <servlet-name>ClusterServlet</servlet-name>
> <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
> <load-on-startup>0</load-on-startup>
> <init-param>
> <param-name>defaultServers</param-name>
> <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
> </init-param>
> <init-param>
> <param-name>DebugConfigInfo</param-name>
> <param-value>ON</param-value>
> </init-param>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>InitServlet</servlet-name>
> <url-pattern>/servlet/InitServlet</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>/</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.html</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.jsp</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
>
> Clearly there is a problem with the Default Web application not being
> seen/mapped properly. Any chances my URL mappings for the filter servlet,
> Struts, and ClusterServlet are stepping on each other?
>
> With respect to the EJB, here is what my weblogic-ejb-jar looks like:
>
> <weblogic-ejb-jar>
> <weblogic-enterprise-bean>
> <ejb-name>Hello</ejb-name>
> <stateless-session-descriptor>
> <pool>
> <max-beans-in-free-pool>100</max-beans-in-free-pool>
> </pool>
> <stateless-clustering>
> <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
> <stateless-bean-load-algorithm>
> round-robin
> </stateless-bean-load-algorithm>
> <stateless-bean-methods-are-idempotent>
> true
> </stateless-bean-methods-are-idempotent>
> </stateless-clustering>
> </stateless-session-descriptor>
> <jndi-name>Hello.Home</jndi-name>
> </weblogic-enterprise-bean>
>
> I run this through ejbc and package everything up into the EAR file.
> However, I get a JNDI lookup failure when I try to access the Bean from
> a standalone Java client running on the Windows machine.
> Here is the jndi.properties file that I am using:
>
> java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
> java.naming.provider.url=t3://localhost:80
>
> Any ideas what I'm doing wrong here? I can post config.xml also if needed.
>
> Thanks in advance!
-
Suppose i want to open some site using mozilla but first time browser fail to set up communication channel. When I attempt second time it successfully set up a connection then my question is that on the second time will browser send error report of first time to that site
What was the specific problem with the first request? For example:
* The server reset the connection
* Page didn't load (blank)
* Security certificate error
* et cetera
In some of these cases, the destination server might not know you sent a first request. And in other cases, that will be in the log. But I do not think Firefox sends any notification of problems with previous connections, the site would have to make an educated guess about the problem based on getting two sequential requests from the same IP address. -
First time user questions (managing library, file size defaults, cropping,)
I'm on my first Mac, which I am enjoying and am also using iPhoto '08 for the first time which is a great tool. It has really increased my efficiency in editing a lot of photos at one time. However, the ease of use makes a couple custom things I want to do difficult. I'd appreciate any feedback;
1) I often want to get at my files for upload or transfer to another machine. When I access Photos with my Finder I can only see "Iphoto Library" (or something like that) which does not show the individual files. Very annoying. I have found that i can browse to one of the menus and select "Open Library" and then I can see all the files.
How can I make it default to this expanded setting? When I am uploading pictures via a web application, for instance, the file open tool does not usually give me the option to Open the library. By Default, I would like the library to always be expanded so I do not have to run iPhoto or select "open" to view the files.
Basically, I just want easy manual control of my files in Finder and other applications.
2) Where do I set the jpg size of an edited file? My camera will output 10MB files and after a simple straighten or crop, iPhoto will save them to 1MB files.
Ignoring the debate on file size, is there a way to control the jpg compression so I can stay as close to what came out of the camera as possible?
3) I crop all my photos to 5x7. If I do that once, it comes up the next time. However, once I straighten the photo and then choose crop, it always comes up with some other odd size by default (the largest rectangle that can be fit in the new photos size).
While I know this may be useful for some people, it is time consuming when going through hundreds of photos to constantly have to choose "5x7" from the drop down list. Is there a way to make this the default?
I'm sure I'll have some more questions, but thus far, I've been real happy with iPhoto.
4) The next task will be sharing this Mac Pictures folder on my Wireless network so my XP PC can access it. I'm open to any tips on that one as well....
Thanks!toddjb
Welcome to the Apple Discussions.
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The format of the iPhoto library is this way because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Basically, I just want easy manual control of my files in Finder and other applications.
What's above is what's on offer. Remember, iPhoto is NOT a file organiser, it's a photo organiser. If you want to organise files, then use a file organiser.
Where do I set the jpg size of an edited file
You don't. Though losing 9MB off a 10MB files is excessive. Where are you getting these file sizes.
I crop all my photos to 5x7. If I do that once, it comes up the next time. However, once I straighten the photo and then choose crop, it always comes up with some other odd size by default (the largest rectangle that can be fit in the new photos size).
Straightening also involves cropping. Best to straighten first, then crop.
The next task will be sharing this Mac Pictures folder on my Wireless network so my XP PC can access it.
If you use the hack detailed above be very careful, it's easy to corrupt the iPhoto Library, and making changes to the iPhoto Package File via the Finder or another app is the most popular way to go about it.
Regards
TD -
Published site w/ iWeb but next time opening iWeb no content was there
I recently published updates to my site but the next time I opened iWeb there was no content & I was asked which templet I wanted to use - as if I was opening for the first time. Is there any way to reload the content into iWeb - if so how? Thanks in advance for any time & effort in helping me.
GuyGuy ~ Assuming you haven't inadvertently logged in to a different User Account, try this... Via Spotlight's magnifying glass icon at upper right of your screen, search for iWeb's Domain file(s) by entering this:
.site
...and see what shows up in the drop-down list of hits. Note that any files which may be iWeb's Domain file won't be displayed as filename.site — rather they'll be displayed simply as filename, where filename could be anything you've perhaps renamed the original Domain file to be.
supagaijin wrote:
Is there any way to reload the content into iWeb - if so how?
If you can't find it, be aware that only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb. You can manually back up the Domain file, or use Backup to back it up.
Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html -
Firefox does not load any sites the first time, including Firefox itself, other browsers do.
In the last few days I have experienced a problem logging on to nearly every site the first time. I get the message that the connection was reset....we have 3 identical computers in our home and I am the only one experiencing this problem. I can immediately try again and log on, but it is annoying to get that message with all sites, including Firefox itself, I have tried to clean out my cache and my cookies, but the problem persists.
Also, firefox is locking up my computer frequently. As it is as I attempt to send this message. I will copy and past this into another message as soon as I restart my computer.Hi cor-el,
Yes the problem has reappeared, so I tried bypassing the cache for my Windows computer as you suggested: Hold down the Shift key and left-click the Reload button, or "Ctrl + Shift + R" (Windows) I then clicked on my bookmark (http://mdotnetpublic.state.mi.us/drive/ ) and I still see a blank screen and a spinning wheel. This seems to go on indefinitely. But like before I posted the question, when I click the reload button it forces the page to load right away.
[running Firefox 32]
I appreciate your quick responses, and look forward to more suggestions. I'll also search the support pages for information about my problem.
Thank you.
Mbr9743 -
"Publish Site Changes" not working - publishes entire site every time
Hi,
the last few times I've tried to update my site, the Publish Site Changes function no longer seems to work - instead the whole site is created and published each time - taking a couple of hours. Has anyone else had this problem? The changes are pretty innocuous, but this has happened three or four times in a row now. Any ideas on how t fix it?
Thanks a lot.Are you using iWeb's built in ftp client to upload to your server? Other users have found that using Cyberduck or another 3rd party ftp client that can upload only changed files will work where iWeb fails. You'll have to publish your site to a folder on the hard drive and upload all of the files the first time. From then on, as long as you don't delete the contents of that folder, you can upload only the new or edited files.
Web Site Maestro will do the same and optimize your files for faster downloading as well.
OT -
I am quite a way through my first build - quite time consuming but a good learning curve. I have a few questions which I hope you could help me with.
MSI MS-7030 nForce 3 K8N Neo Platinum
AMD 64bit 3000
Corsair (VS1GBKIT400) 1024MB (2 x 512MB Matched Pair), DDR400 / PC3200 non-ECC, Unbuffered, CL2.5
Sapphire 9600XT 256mb
LG 1710 B 17"LCD Monitor (DVI)
Aopen cd-rw 32 x 12 x 48
DVD Player Lite-on 16 x 48
Mitsumi 7-in-1 Floppy Drive / Media Drive
Windows 2000 Pro or Windows 2000 Server
Microsoft PS2 Internet Keyboard
Microsoft Optical mouse
Tablet Wacom Graphire 2
Wireless ADSL Router (wired to desktop) D-Link DSL 604
Bios - The basic building tips mentions going into bios before loading Windows. Have not changed much in my bios except boot order. My Seagate Sata 160gb was detected fine as was everything else except a cd drive where the cable had pulled out on the MOB.
Should I change other settings in the bios before installing Windows or later. And if so which are the key settings to change and how do I work out what to change them to? (I am a bit green on bios) I looked at the link breaking through the bios barrier but other than reading every single item... Not sure where to start.
I also flashed the bios to the latest version - should I have done this? Or waited till later?
Windows I am using quite old versions of Windows 2000 Professional and Windows 2000 Server. In both cases including before flashing the bios the setup of devices phase seems to freeze, the blue bar does not move. If I reboot setup quickly moves to where it left off, moves a bit further then freezes again. If I repeat reboot about 4 or 5 times I eventually get Windows working OK.
But the last time I did this I installed Windows 2000 Server over the top of Windows 2000 Pro. Not sure this was a good idea as the MSI drivers won't load. The install program opens and does not seem to do anything.
I am inclined to format the os area of the drive and install Windows again. One of my colleagues suggested that using Windows XP Professional might resolve the problem of Windows 2000 appearing to hang when installing.
Reference material I have read a couple of Build Your Own books before starting this build but found they were a bit light on detail and out of date. There is a lot of helpful information on the Interet but I think I could do with something which would improve my knowledge. Would the latest edition of Upgrading and Repairing PCs by Scott Mueller be a good choice? How well does it cover bios for example which I understand only superficially or would I be better (poorer financially) buying individual books on different subjects e.g. "Breaking through the Bios barrier" by Adrian Wong.
I don't plan to build PC's on a regular basis but would like to understand more than I do at present.Thanks for all the replies.
I will take the advice on bios and leave well alone at this stage.
Will reformat tonight and install Windows XP and see how it goes.
Couple of immediate questions. On my current PC I have 4 different boots but only really use one. My current PC has Windows 2000 Pro with 2gb, 20 gb for apps and the balance of the 80 gb drive for data. Also an 8gb drive which I hardly ever use.
Current plan on my new PC is to initially use the 160gb SATA as 20 gb combined partition for OS and apps and the balance for data. Or are there really benefits for keeping the operating system separate from apps? Using Partititon Magic fast to set up although currently it is only seeing 132 GB although the bios is correctly reporting 160GB. Presumably this is something I need to adjust in Windows once fully installed.
My 80gb drive has IBM ontrack overlay software. I managed to transfer everything to the new drive using PcAnywhere via the router. Which was great as the first time I have got two machines to talk to each other via the ADSL Router. (This was a great relief as I could not PcAnywhere to work via a serial cable!)
My inital intention was to use the 80GB as the OS / Apps drive but based on the other problems I have had, now decided to build and use the system based on a single 160 SATA drive first then when I am sure it is stable go to plan B with using the 80GB IDE drive as the Windows and Apps drive. I then need to reformat the 80GB drive as it currently has IBM Ontrack overlay software because my previous PC bios could not see 80GB otherwise. Considering at that stage installing Windows 64 bit beta on the 160GB drive.
I don't think I need Raid at this stage although I have a little bit of experience as my SQL Server has two Raid drives (0?) plus a hot swop drive stored in our fire proof safe.
I use AVG free antivirus and have the latest version ready to install.
Regarding firewall - confused as to what is required. Was under the impression that my ADSL Router has a hardware firewall. Also the motherboard has a firewall as well doesn't it? Do I also need a software firewall? There is a free one recommended on the AVG (Grisoft site)
By the way. I was a bit apprehensive when doing the build and took hours over it being very careful to read and follow the steps in motherboard, CPU and case (Antec Sonata) manuals step by step - a very slow process. All the cables in the case looked very intimidating at first.
The whole thing is extremely straightforward and towards the end everything became very logical. All the parts I used seem extremely well designed and easy to use. The only part where I had doubts was pushing down the plastic lever on the AMD retail heat sink. I wondered whether I had understood it correctly and whether it was going to snap. -
I was almost done my project. I hadn't published it anywhere. Then, the next day, the clips from my timeline went all grey and there was an "out of date" icon. My project was lost. What happened? It's not the first time it's done that!
You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck? -
My computer wont let me download songs from itunes because when i try to purchase one it makes me type in my password, then it says that since its my first time purchasing some thing from this account (which isnt true) i have to answer my security question which i forgot, what do i do?
bmr1296 wrote:
i have to answer my security question which i forgot, what do i do?
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact -
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Can we tun off Credit card valiation for BP in CRM
Hi all, Customer is created in R/3 and his credit card has already expired. The R/3 system does not make any validation for credit card. The credit card is validated only when he places orders via credit card. But when changes come into CRM, the C
-
Adding a new user to default My dashboard
Hi Forum, I am stuck in a peculiar situation although it is not so tricky issue. I have created reports under default dashboard i.e My Dashboards with a user aaa. Later I have created a user with bbb. Now I want the user bbb to access the My Dashboar
-
Images not loading in repeat regions
I'm a newbie to using repeat regions, but got it working just fine. When I test in Live View, everything looks great, but when I test in a browser, the images are missing. The actual image file name is being added using php to the image's path. I che
-
Hello Everybody Here is my requirement. I am creating a XML form that will be set up with a approval workflow. My form has a combo box with several entries and whenever the user selects something from this box the approver should be changed according
-
Where can I set the screen resolution
I am trying to use do a course online and they said that the screen resolution needs to be set at 1024 x 768. Where do I do this?