Publishing to INTERNAL

Hi ,
I am working on SAP 4.7 on WAS 6.40. When i am trying to publish services on INTERNAL on SAP ITS, i am unable to find "plnt" and the "INTERNAL" value in drop down in the "publish" tab in SE80> Utilities> Settings --> ITS , publish TAB, i am unable to see "INTERNAL" value "plnt"( which is also not seen) .
Can any one guide me on this aspect.What are the settings i need to do to see the INTERNAL in the dropdown which appears.
Regards
Jayesh

HI
GOOD
IN WHICH TAB YOU SUPPOSED TO FIND THE INTERNAL
1-TEST SERVICE
2-PUBLISH
3-PRETTY PRINTER
IF YOU WANT IT IN PUBLISH TAB ,THAN THERE IS SOME DEFAULT VALUE ,IF YOU WANT TO DISPLAY SOME OTHER VALUE THAN THERE WILL BE SOME CONFITURATION DONE BY BASIS GUYS THEN IT WILL DISPLAY THERE.
THANKS
MRUTYUN

Similar Messages

Can't set up Lightroom Publish Services, internal error occurs

I'm trying to use LR 3's publish service for SmugMug. I'm a little scared since
I have a large number of photos to sync up.
When I click on "setup" on the SmugMug export services, I get a popup
error with this message:
"An internal error has occurred: ?:0: attempt to index field 'exportSettings' (a
nil value)"
Any idea how to fix this?
The same message appears for any of the publish services (Flickr, Facebook).
If I go the Publish manager, I can authorize the SmugMug account. It then says it syncs the hierarchy, but afterwards nothing seems to have happened and the account is not longer authorized.
Thanks.

Thanks Mark, but that's not it.
I'm not using Jeff's plugin, but the new built-in one for LR 3.2 and LR3.3. I did try to install Jeff's plugin just before LR3.2 came out. I uninstalled Jeff's version (or at least tried to - it doesn't appear anymore) before I ever used it.
I'm not even to the point of exporting to SmugMug, I just click 'setup' and get the error.

Problem in Publishing to INTERNAL site in se80

Hi All,
I have created an Internet Service in Se80. Now i need to publish it in INTERNAL site.
My problem is that INTERNAL is not available in the drop down list.
Utilities-> Settings->Under Tab "Internet Transaction Server" -> Publish " ON Selected Site".
What i need to do, In order to get that in the drop down list.
Thanks in advance.
Pradeep Alex Luke

Hi Pradeep,
It seems that you do not have a RFC Destination called "INTERNAL".
You should have such entry as Connection type = L (Logical Destination).
You may search for this entry in table RSEUMOD, field "ITS_RFCD".
I hope this helps.
Best regards,
Cristiano

NVGRE - How do publish servers internally when they are behind an NVGRE Router?

I'm looking to span 2 server rooms across my network. I get how outgoing traffic from the Hyper-V hits the GW and gets nat'd from the CA to PA.
What I don't get is how does external machines access the virtual machines when they initiate the conversation?
in my scenario I want one NVGRE router at each server room with a site-to-site vpn to span the network. (I'm assuming)
Lets say I span 10.20.0.0/24 across the L3 network so servers at each site can use the network. Now lets say I put an application on the network that network with a 10.20.0.10/24 CA IP.
How do my clients on the know how to reach this application server and how do they now which server room to connect to?

My Mini which was plugged into the same outlet did not go down. The webserver was shut down earlier than the fileserver (according to the logs), so I thought hacker activity was more likely. It has me very puzzled, however. The fileserver went down at 5:26 PM.
May 27 17:26:14 localhost named[23968]: Cleaned cache of 17 RRsets
May 27 17:26:14 localhost named[23968]: USAGE 1148765174 1144992369 CPU=100.03u$
May 27 17:26:14 localhost named[23968]: NSTATS 1148765174 1144992369 A=21338 PT$
May 27 17:26:14 localhost named[23968]: XSTATS 1148765174 1144992369 RR=102977 $
=2715 RTCP=655 SFwdR=4228 SFail=0 SFErr=0 SNaAns=155651 SNXD=145602 RUQ=0 RURQ=$
May 28 11:33:26 filesvr syslogd: restart
May 28 11:33:26 filesvr mach_kernel: standard timeslicing quantum is 10000 us
May 28 11:33:26 filesvr mach_kernel: vmpagebootstrap: 253940 free pages
I suppose a possibility is that the hacking ceased at 3:25PM, and there was no log item between then and 5:26PM on the webserver, and they both went down in the same power surge.

TMG 2010 publishing Exchange 2010 OWA cannot change password if user must change password at first logon is set

Hi,
I have an odd issue whereby if I set "user must change password" on an AD account, the end user cannot logon, they're simply taken back to the OWA login page as if their password is incorrect.
My setup is as follows:
outer TMG -- uses a listener for email.contoso.com and is configured for no authentication.This uses a publishing rule to publish the inner TMG server. This server is not a domain member.
inner TMG - uses a listener for email.contoso.com and is configured for NLTM\kerberos negotiation with forms authentication (Windows Active Directory). This server is a domain member and use a publishing rule to publish the internal CAS. Allow users to change
password is selected in the publishing rules.
Exchange 2010 SP1 - uses integrated windows and basic authentication. Has the appropriate registry key configured to allow users to change their AD password on first logon.
I've registered an snp for "http/email.contoso.com mailserver-dc1", all SSL certificates being used are valid and my configuration used to allow users to login and change their password with "user must change password on first login"
set in AD.
If I launch a web browser on an internal server and point it to email.contoso.com I'm immediately presented with a generic Windows authentication request (similar to what's seen in ADFS) rather than the standard OWA page. No matter what I do, I cannot login
and change my password using the correct URL. However if I point my browser at
http://192.168.4.10/owa I'm prompted to login and I can change my password using the sam credentials.
The only recent changes made are:
- Disabling SSL 3.0 and enabling TLS (http://www.isaserver.org/articles-tutorials/configuration-security/improving-ssl-security-forefront-threat-management-gateway-tmg-2010-published-web-sites.html)
- Replacing the TMG listener certificates so that they now use SHA2 rather than SHA2 (certificates are trusted on each TMG server)
Looking on the outer TMG and the DC logs I can see schannel errors which I believe are related to the problem. TMG monitoring also shows "Failed connection attempt: 1907 The user'spassword must be changed before logging on for the first time"
I've checked that my inner TMG and DC are using the same certificate for server authentication and gone through this guide:
http://blogs.technet.com/b/keithab/archive/2012/02/29/setting-up-and-troubleshooting-ldaps-authentication-in-forefront-tmg-2010.aspx
If I try to use ldp.exe on the inner TMG, I get the error in the pic below
Thanks
IT Support/Everything

Hi,
You could try to analyze the TMG tracing and try the troubleshoot steps in the blog below.
TMG 2010 – FBA, troubleshooting the change password feature
http://blogs.technet.com/b/isablog/archive/2012/05/07/tmg-2010-fba-troubleshooting-the-change-password-feature.aspx
Best Regards,
Joyce

Password restricted access for published Groupwise calendar

Hello,
we want to publish our internal calendar. But I want to prevent, that everyone who knows the link-address has access to this calendar.
So I tried to add the LDAP-authorisation to the /etc/opt/novell/groupwise/calhost/gwcal.conf as described in Novell-doc 7000659.
But the access to the (for testing) published calendar is still open for every who knows the link-address.
Another directory I published from the same apache2 with the same entrys in the config file in /etc/apache2/vhosts.d/xxxx.conf works fine, if the user wants to get access, he has to login with his uid/password.
Is there another way to restrict the access to the public calendar via LDAP as described?
Thanks for your help,
Holger

Originally Posted by trixlopez
Hi Laura,
Has there been any update on the authentication mechanism built into Calendar Publishing? One of our executive wanted to have his GW calendar access by an external user for business purposes.
We have the Calendar Publishing working but user has some concerns about privacy, if it can be password protected. Any other option/suggested is greatly appreciated.
Thanks.
For example NetIQ Access Manager would be one option to handle this problem.
Thomas

My IP Address was published on a public forum, can I protect myself?

The owner of a forum (AppleTalk Australia) I was a member of published my IP Address in a thread there and I'm concerned about security issues.
How can insure my computer is safe? Is there any configurations in System Preferences, Aiport Admin Utility, etc I should adjust?

What IP address was published, your internal network IP or the external IP?
If it was internal, (ie 192.168.xxx.yyy or 10.0.0.z) then it doesn't matter. If it was external, as long as your firewall is up, I don't think you've got much to worry about.
Besides, mine is not published and I have no end of people trying to gain FTP access or various other connection methods to my computer all the time. If the computer is connected to the 'net, it's published.

Error when trying to sync with publishing server

Hi,
I'm trying to run the Sync-AppVPublishingServer cmdlet on a Windows 7 client however I get the following error back:
sync-appvpublishingserver : Application Virtualization Service failed to complete the requested operation.
Operation attempted: RefreshPublishingServer.
Windows Error: 0x80190194 -
Error module: Publishing. Internal error detail: 45500D2780190194.
Please consult AppV Client Event Log for more details.
At line:1 char:1
+ sync-appvpublishingserver
+
+ CatergoryInfo: InvalidResult; <:> [Sync-AppvPublishingServer], Client Exeception
+ FullyQualifiedErrorId: RefreshPublishingServerError,Microsoft.AppV.AppvClientPowerShell.SyncAppvPublishingServer
In the error logs on the client, I get 2 that I can see:
HttpRequest sendRequest failed.
URL: http://appsvr:8080/
Error code: 0x45500D27 - 0x80190194
Getting server publishing data failed.
URL: http://appsvr:8080/
Error code: 0x45500D27 - 0x80190194
Does anyone have any ideas how to fix this?
For testing, I've turned off the firewall on both the client and server side and also all full access for 'Everyone' to the App-V share.
Thanks

what's the result if you enter the URL into a browser? 194[hex] = 404[dec]: HTTP File not found
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Publishing a site through UAG without using the Portal login

Good Day -
I'd like to ask if there is a way to publish access to an internal site through UAG without users having to use the Portal login - say by providing a link -

Hello,
The portal app is mandatory even if you not use it, indeed if you delete this app UAG stop to work as expected.
In order to publish your internal site without going through the portal, in select application select the following options:
Type: Web
Web: Other Web Application (application specific hostname)
With this you could bind a direct DNS name to your publication without using the portal in order to access to it.
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/

How to publish LDAP to outside of the organization on TMG 2010?

Hi,
An external company requires LDAP for the services that they are going to provide to our school for students. I have Windows 2008 R2 forest and domain level Active Directory with TMG 2010 at the edge.
I was wondering how can I do that task?

Hi,
publish the internal LDAP Server with LDAP/LDAPS (UDP/TCP):
http://technet.microsoft.com/en-us/library/cc995316.aspx
If you must publish your internal Active Directory I recommend using LDAPS or better? use AD-LDS to sync your AD-DS with AD-LDS and only the required attributes from Active Directory
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Published SharePoint site login page taking time to load on Internet

Hi,
We have deployed TMG 2010 in our client environment.
TMG is in Workgroup and
is deployed with Single Network Topology.
TMG version is 7.0.9193.540.
We have published an Internal SharePoint site on Internet with NO Authentication at TMG. the site is internally running
in default zone with windows authentication. Users get the windows pop-up to authenticate themselves when they hit the URL on Internet and will be redirected to the homepage after providing the authentication credentials.
Next, client has extended the site in other zone with Form based authentication and we have published the site on Internet in a same way with
NO Authentication at TMG level. The problem we are facing here is that the site login page loads in 2-3 seconds when accessed from the internal network but is taking a long time to load when somebody tries to access the same site on Internet.
Can anybody tell me what can be the issue for this? Is this a seen issue? We need a urgent fix for this.
Quick help will be appreciated.
Thanks,
Sanjog

Sanjog, I want you to try a couple of things for me. Put a client on the same subnet as TMG. Add a HOSTS file to it so that the name of your SharePoint site resolves to TMG. Try browsing it now. Is there a difference? If it is better then it is safe to say
it is your edge device. If that doesn't improve the performance try browsing it from the TMG Server. Make sure that IE is set up to not use any proxies (including itself). Do you still see the issue? If you do, there is likely a problem between TMG and your
SharePoint site. What devices reside in that data path? Simplify the path the data has to travel as much as you can and try to rule out certain devices.
SharePoint publishing is heavily reliant on your Alternative Access Mappings being set up correctly. Do you know if your SharePoint Administrator set these up? There are numerous articles available explaining these.
http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/05/25/alternate-access-mappings-explained.aspx
I have been supporting ISA/TMG/UAG for a number of years now and, in general, when we see these types of issues it is not a misconfiguration on ISA/TMG/UAG. In most of the cases there is some other network device causing the issue whether it be a Firewall,
a load balancer, a WAN optimizer, whatever.
http://blogs.technet.com/b/keithab/archive/2012/02/15/top-troubleshooting-tips-to-try-before-calling-support-for-isa-tmg.aspx
Let me know if any of those suggestions help.
Keith

OCE Linux publishing a Oracle book

Dear Oracle fellows
I have written a exam preparation book for the Oracle Linux OCE exam.
Can somebody tell me how I can publish that book via an oracle editor?
Please help me on that process.
Any feedback of that experience will be highly appreciated.
thanks

Hi deepakbhatnagar
Well I have got a sad reply from Oracle Press that they can't publish the OCE books at the moment. (May be some of the much more routined writers that are working for that publisher have it already on schedule).
I wrote also guide on OCE RAC and publish it internally in my company knowledge database.
I have tried to get intouch with rampant but they didn't take my request seriously as it is couples of weeks that I haven't got any answer.
Sorry for those bad news.
May be we should try to work together on getting our stuff published?

BEx Query Designer Jump Query Error

Creating a jump query from BW (nw2004s) to R3 (6.20).
Services in SICF activated
webgui, system and shuffler all published to internal.
Table TWPURLSVR maintained on the R3 side.
The query logs into the portal, but upon attempting to do a dispaly w/in the query receive the following:
Business Server Page (BSP) Error
What happened?
Call of BSP page terminated due to error.
Note
Following error text processed in system:
BSP Exception: the Application Name ! in URL /sap/bc/bsp/rsrr_web/!?okcode=ENTR&G_S_WEB-DEST=TW1C100&G_S_WEB-HANDLE=45FDQG3EXVLGC22F7ZTBYNX6I&client=100&language=EN&logingroup=SPACE is invalid.
Error Type:
Your SAP Business Server Pages Team
Any suggestions appreciated!

Whats your R/2 WAS version?
Delete the entries from the TWPURLSVR table and maintain it in RSBBS_RSRR_URL where you can store the full URL and dont have to worry about the different fields.
If 620 then you will need a standalone ITS and the URL can be maintained in the format below.
http://<server port>/scripts/wgate/webgui/!?client=100&transaction=RSRR&
For WAS 640 and above.
http://<server port>//sap/bc/gui/sap/its/webgui?

Configuration of Direct Access 2012

Good morning.
I have tried to set up Direct Access from what I see is pretty much a 30-40 minute job, but has turned out to be something of a pain. Having followed the video on youtube for Windows Server 2012 with Basic PKI configuration and Windows 7 clients. I
have set up a working DA server with no issues and all green ticks.
Here's a run down.
I have a DC (2012) with the CA already installed.
I have a virtual DA (2012) set up with the advanced settings.
I have a a TMG 2010 server as the firewall with a Non-Web Publishing rule designed to forward HTTPS requests to the DA on the internal network.
The set up went as planned and I followed the instruction to set up the PKI and all computers have picked up a computer Certificate for the CA so that the internal root is validated.
The Certificates that I chose for the DA server were as follows;
DirectAccess-NLS.mydomain.local
remote.my-external-domain-name.co.uk
both published from my internal CA so that the root of the certificates were valid.
I have a Third party wildcard cert ( *.my-external-domain-name.co.uk ) for TMG to allow other connection such as VPN and web access.
DA Config:
Step 1: Remote Clients
I set up the DA server as per the video, set the DirectAccessClient group, and in the
Network Connectivity Assistant The resource was filled in with the
http://diectaccess-WebProbeHost URL.
Step 2: Remote Access Server
The Network Topology was set to Behind an edge device (with single network adapter), and then is says to type in the 'PUBLIC NAME' used by clients to connect to the Remove Access Server. Here I typed in the external DNS
name remote.my-external-domain-name.co.uk.
Network Adapters had the one ethernet and an IPv6 address. The
Select Certificate sued to authenticate IP-HTTPS connections has the CN=remote.my-external-domain-name.co.uk.
Authentication is set to AD and I used the root certificate of the CA for
use computer certificates. I also Enabled windows 7 client computers to connect via DirectAccess.
Step 3: Infrastructure Servers
Network Location Sevrer had the NLS is deployed on this server with the
DirectAccess-NLS cert.
DNS had the internal domain and the DirectAccess-NLS. the Internal domain was pointing to the IPv4 address of the DA. I read that I need to put the external name suffix of remote.my-external-domain-name.co.uk entry in and pointed that
to the internal DA IPv4 address also.
DNS Suffix List was set automatically and I also added my external domain name just in case.
Managerment was straight forward and I pointed to our System Centre 2012 R2 server.
Upon clicking finish and applying the GPO policies everything went according to plan. All green ticks. I did a GPupdate on the client I was testing and the GPO policies came through.
Now the issue I have is that on the internal network I get the Last Error 0x80190190 unable to connect to server. Now I am sure that this should say active as it is inside the network. I get the same error out side. When I check the DA server for
netsh int https sh int it returns the value that client authentication = NONE. I set it up to use computer certificates and even is I uncheck that it does not change.
It there a straight forward thing I missed or is it to do with publishing in TMG. Internally the direct access client will not connect as it will find the NLS in the internal DNS as I have the host record for both the server FQDN and the DirectAccess-NLS
potining to the IPv4 address. I also have the external remote.my-external-domain-name.co.uk entry in the internal DNS to point to the internal IPv4.
I have opened the ports for 443, 62000 on the DA for the IIS inbound and outbound.
I have a windows 8 client but need to test it as Windows 8 is supposed to work just like that.
What am I doing wrong here?? Any ideas would be much appreciated.

Thank you for this Jordan.
I have now got it working. The next step is to make sure my applications are all using Names rather than IP addresses.
I have basically setup the system as per my original thread that follows, NOT in BOLD.
I have tried to set up Direct Access from what I see is pretty much a 30-40 minute job, but has turned out to be something of a pain. Having followed the video on youtube for Windows Server 2012 with Basic PKI configuration and Windows 7 clients. I have
set up a working DA server with no issues and all green ticks.
Here's a run down.
I have a DC (2012) with the CA already installed.
I have a virtual DA (2012) set up with the advanced settings.
I have a a TMG 2010 server as the firewall with a Non-Web Publishing rule designed to forward HTTPS requests to the DA on the internal network.
The set up went as planned and I followed the instruction to set up the PKI and all computers have picked up a computer Certificate for the CA so that the internal root is validated.
The Certificates that I chose for the DA server were as follows;
DirectAccess-NLS.mydomain.local
remote.my-external-domain-name.co.uk
both published from my internal CA so that the root of the certificates were valid.
I have a Third party wildcard cert ( *.my-external-domain-name.co.uk ) for TMG to allow other connection such as VPN and web access.
DA Config:
Step
1: Remote Clients
I set up the DA server as per the video, set the DirectAccessClient group, and in the Network Connectivity Assistant The resource was
filled in with the http://diectaccess-WebProbeHost URL.
Step
2: Remote Access Server
The Network Topology was set to Behind
an edge device (with single network adapter), and then is says to type in the 'PUBLIC NAME' used by clients to connect to the Remove Access Server. Here I typed in the external DNS name remote.my-external-domain-name.co.uk.
Network Adapters had the one ethernet and an IPv6 address. The Select
Certificate sued to authenticate IP-HTTPS connections has the CN=remote.my-external-domain-name.co.uk.
Authentication is set to AD and I used the root certificate of the CA for use
computer certificates. I also Enabled windows 7 client computers to connect via DirectAccess.
Step
3: Infrastructure Servers
Network Location Sevrer had the NLS
is deployed on this server with the DirectAccess-NLS cert.
DNS had the internal domain and the DirectAccess-NLS. the Internal domain was pointing to the IPv4 address of the DA. I read that I need
to put the external name suffix of remote.my-external-domain-name.co.uk entry in and pointed that to the internal DA IPv4 address also.
DNS Suffix List was set automatically and I also added my external domain name just in case.
Managerment was straight forward and I pointed to our System Centre 2012 R2 server.
Upon clicking finish and applying the GPO policies everything went according to plan. All green ticks. I did a GPupdate on the client I was testing and the GPO policies came through.
I have set up TMG as per the isa.org forum
http://www.isaserver.org/articles-tutorials/general/implementing-windows-server-2012-directaccess-behind-forefront-tmg-part2.html .
@ Jordan - I ensured that I had a separate external IP address for the requests from the clients to TMG as I publish websites internally.
I used a third party wildcard cert for the IP-HTTPS connect part in DA Config Step 2.
All the rest of the DA set up was pretty much out of the box as stated above.

Some of the services of ITS 640 are not working

Hi All,
I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
I am using internal ITS for HTML GUI.
Some of the iviews of the business packages are working but some of them are not.
I am getting an error message
"The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
Note
The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
I have published all the services that are under SICF.
I had also published all the services using w3_publish_services and siac_publish_all_int.
It says that all the services are succesfully published.
When I go to SICf to test the service,some of them are not working.
Can you guys tell me what are the steps that I am missing?
Thanks,
Paritosh

I am also getting the same th_res_free error..
I have installed nw04 sr1 and trying to run ESS on it.
My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
Now how do i publish the services on WAS 6.4??
Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
Please tell me what can be done in this case.
I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
Please help me out .. i dont want to install a ITS on another machine which is simple solution..

Publishing to INTERNAL

Similar Messages

Maybe you are looking for