Publishing to MobileMe - User name/password list lost and can not create ne

I have a problem when publishing to MobileMe. All my previous username/passwords and not in the list, it is empty and when I try to create a new one it doesn't save it and only allows me to publish to everyone. Has anyone else have this problem? I am using iPhoto09.
Vito

I have a problem when publishing to MobileMe. All my previous username/passwords and not in the list, it is empty and when I try to create a new one it doesn't save it and only allows me to publish to everyone. Has anyone else have this problem? I am using iPhoto09.
Vito

Similar Messages

  • Doesn't accept User name + Password after archive and install

    I did an archive and install, when finished the install the computer restarted and came up with the login Name + Password screen. I type in every account Name + Password I know and the login window just shakes telling me its wrong. I don't know what to do from this point, I was thinking about reseting the admin password but I'm not sure thats the problem because we have two admin accounts and I know both passwords.
    I archive and installed 10.4.0 over 10.4.7. And currently on my backup install of tiger.

    I did an archive and install because I had no video, and sometimes could not turn on the IBook. I have had two logic boards that went bad and were fixed free by Apple. When I finished the install the computer restarted and came up with the login Name + Password screen. When I type in Name + Password the login window just shakes telling me its wrong, which it is not.
    It is possible that the administrator or other user on the computer were erased at some point when I thought to get rid of unnecessary stuff (mistake!)
    I archive and installed 10.2.0 over 10.3.7, because I thought the instructions were to use the original install disk.
    I have a backup of the info on this computer on a MacBook Pro that I use all the time, this IBook I only use for email, etc.

  • HELP-I am lost and can not figure out how to work ...

    I have a fopster dog that is due to have pups any time.  I need to run errands and be able to look in on her.  A friend suggested Skype.  I have downloaded it to my laptop and my Iphone 5s.
    I can call from the laptop and my phone rings.  When I click on the camera it says video not avail to cell or land lines ( or something to that effect).
    How do I call into my laptop from my Iphone?  How can I enable vidoe so I can see her through my laptop webcam?

    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Without syncing: File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your comptuer for just such an occasion.  use your backup copy to put everything back.

  • Unlock user name password

    i cant seem to figure out my user name password...how can i reset it? its for a hp mini 110 ..

    You ( aka the "parent" ) needs to use the password entered when parental control was enabled in the first place, not your Windows password.
    tt2

  • How do I open my contribute program when it tells me user name/password is incorrect when I have not changed it?

    How can I get into my contribute CS4 program when it says my user name/password is incorrect and I have never changed either of these?

    Yes.  FTP username and password.

  • TS4009 before upgrading to Lion, I switched from MobileMe to iCloud.  At that time I used my MobileMe user name and password.  I purchased additional storage space to 20GB.  I was unabl to send any emails during this time.  After researching, I upgraded t

    before upgrading to Lion, I switched from MobileMe to iCloud.  At that time I used my MobileMe user name and password.  I purchased additional storage space to 20GB.  I was unable to send any emails during this time.  After researching, I upgraded to Lion and changed my icloud mail usuer name and password from the original I used from mobileme.  How do I get my upgraded storage to my new account.  I intend to delete the first one.
    Please help!

    Welcome to the Apple Community.
    Unfortunately you can't, the additional storage belongs to your first account, you can't transfer it.

  • Upgrade to MaxDB 7.8 fails due to -4008,Unknown user name/password

    Hello,
    I have a strange problem. I try to update a MaxDB 7.7 instance to 7.8.
    I start ./DBUPDATE.SH:
    INFORMATION : This program upgrades the SAP MaxDB database instance
    Do you want to continue the upgrade [Y] :  Y
    Check installation of C++ runtime
    ...execution 12:08:59
    OK
    IndepProgPath : /sapdb/programs
    IndepDataPath : /sapdb/data
    Please enter SAP MaxDB Name    [SID] :  J93
    Please enter SAP System Name   [SID] :  J93
    Please enter DBM User Name [control] :  control
    Please enter DBM User Password       :
    INSTROOT        : /sapdb/J93/db
    Authorization successful
    DB KERNEL       : 64-BIT
    DB VERSION      : 7.7.04 Build 28
    Database instance version supported
    PrivateDataPath : NO
    Check availability of SAP users
    ...execution 12:09:05
    SAP System Administrator   : j93adm
    SAP Database Administrator : sqdj93
    OK
    SAP VERSION     : -4008,Unknown user name/password combination
    Please confirm the upgrade start [Y] :
    Obviously the DBM user and password have been accepted.
    Also I created the xuser entry according to SAP note 39439:
    xuser -U DEFAULT -u SAPJ93DB,password -d J93 -S SAPR3 -n minbbn30 -t 0 -I 0 set
    xuser list
    XUSER Entry  1
    Key           :DEFAULT
    Username      :SAPJ93DB
    UsernameUCS2  :S.A.P.J.9.3.D.B. . . . . . . . . . . . . . . . . . . . . . . . .
    Password      :?????????
    PasswordUCS2  :?????????
    Long Password :?????????
    Dbname        :J93
    Nodename      :minbbn30
    Sqlmode       :SAPR3
    Cachelimit    :-1
    Timeout       :0
    Isolation     :0
    Charset       :<unspecified>
    I can successfully connect to the database with SAPJ93DB:
    dbmcli -u control,password -d J93 sql_connect SAPJ93DB,password
    OK
    So why can't I simply upgrade this MaxDB instance? Is there any logfile of DBUPDATE.SH with more information available?
    Regards,
    Mark

    Hi Mark,
    this error can be ignored (see note 1353266, section IV "Errors during the upgrade").
    Continue the upgrade by answering the question
    SAP VERSION     : -4008,Unknown user name/password combination
    Please confirm the upgrade start [Y] :
    with Y.
    Regards,
    Steffen

  • When trying to send photos using iphoto  a window comes up and says that email server did'nt recognize user name /password ...what do i do to correct this please  marie

    hello     when I try to send photos using the iphoto  a window comes up to tell me that my email server didn't rercognize user name /password  how do i correct this .. as i have cganged my email address  but i can't get rid of the old  one    thank you   marie

    Hi Cody\'sgirl,
    If you are having issues emailing photos directly from iPhoto, you may want to double check the email account information that is set in iPhoto. You may find the following article helpful (the section below is about setting up a new account, but it should be the same location to check existing account info):
    To set up a Photo Mail account:
    Choose iPhoto > Preferences, and then click Accounts.If you’re in full-screen view, move your pointer to the top of the screen to make the menu bar appear.
    Click the Add button in the lower-left corner.
    Click Email, and then click Add.
    Choose your email service provider.If your service provider isn’t listed, choose Other.
    Type the requested information.If you use the Mail application included with OS X, some account information might be filled in already. If you’re not sure what to type, contact your service provider.
    You can set up more than one Photo Mail account by repeating these steps for each account. When you send an email, you can change the outgoing account by clicking the From pop-up menu and choosing an account.
    iPhoto '11: Email your photos
    http://support.apple.com/kb/PH2421
    Regards,
    - Brenden

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • HT1515 Will Airport Express work in hotels in China? They require user name/password to connect. Has anyone used one there?

    I will be traveling in China with my iPad2 and want to use hotel wireless. It requires a sign-in with user name/password.  Can I use an Airport Express for this purpose? How do I set it up for that? I have an old Express (pre-2007); can I use it or do I need to upgrade to the new model?

    OK - I have never been to China but the posts here say that it can be done - the cable from the hotel should be connected to the WAN port of the Express - the Express should be in bridge mode and set to create a wireless network with a name and password of your choice - you can do this with a computer before you leave for China or with the iPad if you have previously downloaded the Airport Utility app - you would then connect to your network and attempt to bring up a web page such as Google - the hotel should then intervene and ask you for the login info that they have provided.
    Charlie

  • File Adapter - anonymous login (or )User name ,password login - Efficient?

    Hi Folks,
    In File Adapter processing , anonymous login (or) proper user name password based login is recommended ?
    Because we have faced many issue while using username based login in File adapter  .
    Which one is best ?
    Regards.,
    Shiva

    Hi Shiva ,
    We will go one by one :
    You can go for the Anonymous login  but the problem is the any body can access the FTP server and it is not the secure one,that is why business generally don't allow the Anonymous login.
    Coming to Proper user name password login ,I would advice you to use this one as the connection is more secure in this case.But this also comes with a problem that the username password generally expires after some time as per security policy and you have to change the username password for the FTP server as well as in File adapter which you are using.But this problem can be solved by going for a permanent username and password.
    I would recommend you to go for Proper user name and password.
    Regards
    Ravi Anand
    Edited by: Ravi Anand@85 on Mar 12, 2010 7:56 AM

  • Error: sql.SQLError: [-4008] (at 1) Unknown user name/password combination

    Hello Experts,
    After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
    Logical Command: DBMRFC
    Parameter: exec_lcinit register
    Name and Server     : LCQ - dusepierp12
    DBMRFC Function     : DBM_EXECUTE
    Command             : exec_lcinit register
    Error               : DBM Error
    Return Code         :     -24964
    Error Message       : ERR_EXECUTE: error in program execution#
    0,sap\lcinit LCQ  register -uDBM , -uDBA , -uSQL ,
    liveCache LCQ (register)
    The liveCache state is ONLINE
    DBMServer 7.6.04   Build 009-123-182-193
    Creating liveCache application procedures
    ERROR : liveCache LCQ not registered (see "s:\sapdb\data\wrk\LCQ\lcinit.log").
    START *****************************
    liveCache LCQ (register)
    Thu 07/30/2009
    10:26 PM
    installation path = S:\sapdb\LCQ\db
    OK
    DBMServer 7.6.04   Build 009-123-182-193
    Creating liveCache application procedures
    ERR
    -24964,ERR_EXECUTE: error in program execution
    1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
    Traceback----
    Error----
    sql.SQLError: [-4008] (at 1) Unknown user name/password combination
    Traceback (most recent call last):
      File "S:\sapdb\LCQ\db\env\lapps.py", line 38, in ?
        connectAndInstall (install, install.__doc__)
      File "S:\sapdb\LCQ\db\env\installib.py", line 398, in connectAndInstall
        session = connect (options)
      File "S:\sapdb\LCQ\db\env\installib.py", line 350, in connect
        alterUserNotExclusive(options)
      File "S:\sapdb\LCQ\db\env\installib.py", line 338, in alterUserNotExclusive
        session.release()
    AttributeError: 'NoneType' object has no attribute 'release'
    ERROR : liveCache LCQ not registered
    Thu 07/30/2009
    10:26 PM
    END ******************************
    Many Thanks,
    TIA,
    Nisch

    Nischal Mahakal wrote:>
    > Hello Experts,
    >
    > After a Test refresh for SCM system, we restored Livecache. The database has been changed and starts using database manager, during registration (Register LCApps) it gives the following error:
    > -24964,ERR_EXECUTE: error in program execution
    > 1,""S:\sapdb\LCQ\db\bin\x_python" "S:\sapdb\LCQ\db\env\lapps.py" -R "S:\sapdb\LCQ\db" -d LCQ -u DBADMIN,*"
    > -
    Traceback----
    Hi there,
    looks like you entered "DBADMIN" when you created the liveCache instance in DBMGUI as the DBM Operator.
    For SAP installations, this user is always named "CONTROL".
    So, drop the instance again, recreate it with "CONTROL" and re-do the recovery of the liveCache backup.
    regards,
    Lars

  • Safari 2.0.3 in OS 10.4.5 only remembers site user name/password 25%

    In previous OS Safari behaved itself, but in this version the "do you want Safari to remember your user name/password" only works about 25% of the time.
    Ideas/explanations? BTW I have never used the keychain.
    I have just about given up and reverted to having the different names and passwords in Stickies and enter them manually-- what a PITA!
    Rich
    G4 Dig Audio 733mHz 1.5GB RAM   Mac OS X (10.4.5)   (laptop with same OS and same problems)

    Problem solved by using Firefox.

  • User Name/Password for SQL*Plus

    I installed the Oracle 8i Personal Version in my PC.
    I have been trying to log on to the Oracle SQL*Plus screen, which asks me for the User Name, Password and the Host String.
    Does anybody out there know what I should use here to log on to this screen?
    Thanks in advance.
    Jay
    [email protected]

    Hi,
    Please check old mails and then forward questions.
    User scott/tiger
    DBA system/manager
    SYS sys /change_on_install
    with regards,
    Boby Jose Thekkanath,
    Dharma Computers(P) Ltd.
    Bangalore-India.
    www.dharma.com

  • POP3 -Keep asking for user name & Password

     
    Hi,
    We have exchange 2003 server with Service pack 2. We have user who check their mails through   Outlook 2003, Outlook web access & some users are using POP3 to download the messages.
    Since last few weeks, we are getting the complained that when engineers are trying to configured users account in Outlook with POP3 configuration, its keep asking for user name & password. But with same user name & passwords user is able to check their mail through Outlook web access.
    In some of our site, users are able to download messages through pop3 account but this account was configured long back.
    Kindly advise.

    HI,
    This is happening mainly when
    1. user changed his password through Outlook web access next time its keep poping up for password & it will not accept the new passord.
    2. if user is using  OWA & when we try to configured his mail in Outlool with POP3 .
    See if i remove exchange attributes from user's account & then delete the users from AD & Recreated with same  user name, Password & reconnected  to that user to his old mailbox, it;s work fine.
    Regards,
    Chetan
    POP3 is enabled by default for all the users.

Maybe you are looking for