Publishing to YouTube Failed: Timed out!

I need help.
I upload videos edited in FCPX to Youtube via the 'share' option, sometimes it works but other times it doesn't and an error message pops up saying 'Publishing to YouTube Failed: Timed Out'. In my video manager page on YT it say's 'failed to convert file' but I don't use anything differently on most of my videos. How can I stop this from happening?

Hi Brian,
I gave up going direct from FCPX and instead went through Compressor by exportiing as an H.264 file. In Compressor I chose the YouTube files as the destination files and they went just as they should. Still peeved that I couldn't go directly from FCPX but it is just a small few steps to go through Compressor. If you don't have Compressor I would highly recommend you get it as it provides a huge range of files to convert to.
Cheers!
Turiteabend

Similar Messages

Publishing to YouTube Failed: The request timed out.

Why do I get "Publishing to YouTube Failed: The request timed out." when trying to load to YouTube. It doesn't happen all the time, just once in a while but it's been happening everytime for the past week!!
I am using the pre-set drop down feature - Share to YouTube.
Help! Thanks.

Just trying the upload from the desktop: 'Uploading your video. 2616 minutes remaining.'
Am also doing another export using H264 to see if that is quicker. It's only 15mins of footage.

Publishing to YouTube Failed: The operation couldn't be completed. No such file or directory

I am getting the following error in iMovie when I attempt to publish a video clip to YouTube: Publishing to YouTube Failed: The operation couldn’t be completed. No such file or directory. Any ideas about what is going on? I did not find anything directly related to this on general google search...

I'm not certain why this error is coming up, but I have almost 500 youtube videos on youtube, all created through the years with iMovie.
Here is what I find. The publishing tool through iMovie is very sketchy, and doesnt work well most the time. Plus you usually lose alot of quality. Go to File>Share>File. This will then save it as a file to wherever you want. Then when you go to upload on youtube, select this file.

Cannot erase iPhone 4 - verification failed - timed out

cannot erase iPhone 4 - verification failed - timed out. can anyone help?

Hey there crazylegsoz,
It sounds like you are unable to restore your phone with iTunes because the connection keeps timing out. There can be a number of causes for this, so I would use the troubleshooting from the following article to help resolve or isolate the issue:
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/TS5254
Check connections
Try these steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPhone, iPad, or iPod touch.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you haven't already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thank you for using Apple Support Communities.
All the best,
Sterling

"Publishing to YouTube failed. The request timed out." - This was a 54:10 long project and "share to DVD" was OK

Another long project (54:10) and new problems .
I am not a frequent FCP user and during my last major project a couple of months ago I experienced "Share operation DVD has failed, QuickTime Error 0" and "QuickTime error - 50" when exporting to YouTube. Thanks to Ross I overcame then both challenges.
The current project is 54:10 and "share to DVD" went reasonably well. However, during burning several copies (20 copies) of the same DVD, at the very end of the operation I received a message "There was an error buring your disk, The operation could not be completed (DSP Publishing error - 29)". This was puzzling because the copies when played seem all rirght and usable.
Is there any remedy regarding the above (not so important as the copies are playable) and the "Publishing to You Tube failed. The request timed out" ? Sharing to YouTube took over 8 hours and the counter went up from 1 to 100. Any suggestions, please ?
Warm regards.

Thanks for warning. Will not touch the library bundle any more. However, I will describe the current situation:
Under "Libraries">"Macintosh HD projects and events"> (five items).
These five items are:
1. "Updated projects" - containing 2 projects ("Italy" and "Cracow") and 1 footage/clips "Cracow" only;
2. "Xmas" - containing 1 project ("Xmas" ) and the corresponding footage ("Xmas");
3. "Rome" - containing 2 projects ("Pandas" and "Rome") and 2 footages ("Pandas" and "Rome");
4. "New Even Wednesday 11 December 2013" - empty (message "import media");
5. "Italy" - no projects, just footage of "Italy"
What a mess I have made ! - It appears that project "Italy" could be moved from 1 to 5. A new event (?) called "Pandas" could be created with its own project and footage. No 4 could be deleted. No 2 is OK.
Please comment.
I appreciate your patience
Regards -
Kris

Uploading to YouTube - Keeps "timing out"

Hello, I'm trying to post the first video I made using iMovie 08 to YouTube. It's 9.06 minutes long and I'm using the Share > YouTube option.
I've tried it several times and it takes approx 15 mins to upload then I get a message saying
Communication Error
An error occurred during communication with the server ("timed out"). Please make sure you are connected to the internet, and then try again.
I have tried several times and my internet connection is fine. Each time I try it goes as far as "less than a minute" of upload.
Is there another way of doing it? i.e, saving it (somehow) and using the YouTube uploader?
Cheers

I never would have guessing zapping the PRAM would have done anything. Just in case you haven't tried this, I would take a visit to the mobileme support site and see if there are any current issues (there are none as of writing this). The support site is here:
http://www.apple.com/support/mobileme/
I would go down to the bottom of the page and under 'topics' choose 'mobileme mail' then 'receiving mail'. Seeing as you've already removed the account completely and re-setup from scratch, I would give the 'Chat' feature a try. The fact that the AOL account is working, really points in the direction of the specific email provider your using; in this case Apple's. You could try setting up the account in a new admin user to see if the issuer persists.

FCP to YouTube - 'the request timed out'

Hi guys, here's my question: I uploaded a video to YouTube from final cut pro two days ago to a friend's channel. Today, I tried uploading the same video to my own channel, but in FCP it's freezing at 50% upload. I get this message: Publishing to YouTube failed - the request timed out. Any thoughts on this?
I don't think it's to do with the duplicate video because YouTube allows duplicate videos as far as I know. I also slightly changed the size.
In the past, I've been able to upload seamlessly from FCP to YouTube, so I have no idea why it's not letting me now.
Many thanks for your help,
Brian

If you don't have Compressor, check the Shared Items folder in your event. Open it in QuickTime. If it plays OK, upload that file using the YT uploader.
Good Luck.
Russ

Issue with flat file loading timing out

Hello
I have a scenario, where I am loading a flat file with 65k records into a cube. The problem is, in the loading process, I have to look up the 0Material table which has a million records.
I do have an internal table in the program, where I select a subset of the Material table ie around 20k to 30k records. But my extraction process takes more than 1 1/2 hrs and is failing (timed out).
How can i address this issue? I tried building indexes on the Material table and its not helping.
Thanks,
Srinivas.

Unfortunately, this is BW 3.5, so there is no END routine option here. And I tried both .csv and notepad file methods, and both are creating problems for us.
This is the total code, do you guyz see any potential issues:
Start Routine (main code)
refresh i_oldmats.
refresh ZI_MATL.
data: wa_datapak type transfer_structure.
loop at datapak into wa_datapak. (** I collect all the old material numbers from my flat file into an internal table i_oldmats**)
   i_oldmats-/BIC/ZZOLDMATL = wa_datapak-/BIC/ZZOLDMATL.
   collect i_oldmats.
endloop.
sort i_oldmats.
SELECT /BIC/ZZOLDMATL MATERIAL (** ZI_MATL only has recs. where old materials exist, this gets about 300k records out of 1M**)
         FROM /BI0/PMATERIAL
         INTO ZI_MATL FOR ALL
         ENTRIES in i_oldmats WHERE
          /BIC/ZZOLDMATL = i_oldmats-/BIC/ZZOLDMATL .
            collect    ZI_MATL.
Endselect.
Sort ZI_MATL.
Transfer rule routine (main code)
IF TRAN_STRUCTURE-MATERIAL = 'NA'.
    READ TABLE ZI_MATL INTO ZW_MATL
    WITH KEY /BIC/ZZOLDMATL = TRAN_STRUCTURE-/BIC/ZZOLDMATL
    BINARY SEARCH.
    IF SY-SUBRC = 0.
      RESULT = ZW_MATL-MATERIAL.
    ENDIF.
ELSE.
    RESULT = TRAN_STRUCTURE-MATERIAL.
ENDIF.
Regards,
Srinivas.

Signing on to Business Catalyst is timing out

I have not used my Creative Cloud allotment of Business Catalyst testing sites in a while, and I want to manage them - remove unused ones and add anew site that I am testing.
I don't know where to do that or how to sign on to that.
Also when I just hit Publish, the logon is timing out. I have chnged my password recently, but I have no trouble logging on to Adobe.com.
How do I correct this??
Thanks,
Barbara

Hi Artsyfellow,
Thanks for your suggestions!
Hmmm - well there is menu item that says publish, as well as the publish option at the top right, but both of them send me to what seems to be an endless loop of trying to log me into business Catalyst. I really wish i could find that "manage" command you speak of - been searching for tall morning!
I went to BC and was able to log in with my Adbe.com password, but it would only let me see either of the two sites I had up for testing purposes(there is a dropdown menu on the BC login page) but no administrator type page showing me BOTH sites and allowing me to delete them - BOTH are old testing sites no longer in use.
so i finally uploaded my new site onto a testing folder on my own server at InMotion, so that I can send it to my client. I need to get this straightened out, though - very frustrating - I never go wrong assuming it is my own error causing these problems, but still trying to debug myself!
Thanks a bunch,
Barb

Slapd_poll () timed out

Hello there,
I see the below errors in ODSEE11gR1 version on Linux server, can some one tell me what is the reason for this error?
error log:
[18/Jul/2011:11:54:22 -0400] - DEBUG - conn=-1 op=-1 msgId=-1 - slapd_poll(18) timed out
[18/Jul/2011:11:54:27 -0400] - DEBUG - conn=-1 op=-1 msgId=-1 - slapd_poll(24) timed out
[18/Jul/2011:11:54:32 -0400] - DEBUG - conn=-1 op=-1 msgId=-1 - slapd_poll(22) timed out
[18/Jul/2011:11:54:37 -0400] - DEBUG - conn=-1 op=-1 msgId=-1 - slapd_poll(23) timed out
access log:
[18/Jul/2011:11:52:30 -0400] conn=14 op=-1 msgId=-1 - fd=18 slot=18 LDAP connection from 10.5.59.5:58730 to 10.22.33.65
[18/Jul/2011:11:52:30 -0400] conn=14 op=0 msgId=1 - EXT oid="1.3.6.1.4.1.1466.20037"
[18/Jul/2011:11:52:30 -0400] conn=14 op=0 msgId=1 - RESULT err=0 tag=120 nentries=0 etime=0.001000, Start TLS request accepted.Server willing to negotiate SSL.
[18/Jul/2011:11:52:30 -0400] conn=14 op=-1 msgId=-1 - SSL 256-bit AES-256
[18/Jul/2011:11:52:30 -0400] conn=14 op=1 msgId=2 - BIND dn="cn=proxy,dc=domain,dc=com" method=128 version=3
[18/Jul/2011:11:52:30 -0400] conn=14 op=1 msgId=2 - RESULT err=0 tag=97 nentries=0 etime=0.018000 dn="cn=proxy,dc=domain,dc=com"
[18/Jul/2011:11:52:30 -0400] conn=14 op=2 msgId=3 - SRCH base="ou=people,ou=linux,dc=domain,dc=com" scope=2 filter="(&(objectClass=posixAccount)(uid=testunix))" attrs=ALL
[18/Jul/2011:11:52:30 -0400] conn=14 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0.023000
[18/Jul/2011:11:52:30 -0400] conn=14 op=3 msgId=4 - BIND dn="uid=testunix,ou=people,ou=linux,dc=domain,dc=com" method=128 version=3
[18/Jul/2011:11:52:30 -0400] conn=14 op=3 msgId=4 - RESULT err=0 tag=97 nentries=0 etime=0.000000 dn="uid=testunix,ou=people,ou=linux,dc=domain,dc=com"
[18/Jul/2011:11:52:30 -0400] conn=14 op=4 msgId=5 - BIND dn="cn=proxy,dc=domain,dc=com" method=128 version=3
[18/Jul/2011:11:52:30 -0400] conn=14 op=4 msgId=5 - RESULT err=0 tag=97 nentries=0 etime=0.001000 dn="cn=proxy,dc=domain,dc=com"
[18/Jul/2011:11:54:22 -0400] conn=14 op=5 msgId=0 - RESULT err=80 tag=120 nentries=0 etime=104.568000
[18/Jul/2011:11:54:22 -0400] conn=14 op=-1 msgId=-1 - closing from 10.5.59.5:58730 - B1 - Client request contains an ASN.1 BER tag that is corrupt or connection aborted -
[18/Jul/2011:11:54:22 -0400] conn=14 op=-1 msgId=-1 - closed.
Any idea why i see 'ASN.1' BER tag error in the access log, when i see this error in the access log i also see slapd_poll () timed out error in the error log? Please let me know .
Thanks
Stan

I use Oracle (Sun) Directory 11gR1+Ps1 version on SLES 11 ass the backend LDAP for all Unix client server authentication against it. When i issue a 'passwd' command i get these error messages in the access/errors logs and passwd command hangs. When i checked the client server logs, i see the below messages..
Jul 19 12:04:10 labldaptest1 passwd[17524]: nss_ldap: ldap_start_tls failed: Timed out
Jul 19 12:04:15 labldaptest1 passwd[17524]: nss_ldap: ldap_start_tls failed: Timed out
Jul 19 12:04:15 labldaptest1 passwd[17524]: nss_ldap: could not search LDAP server - Server is unavailable

Publishing to Vimeo Failed: The request timed out.

Why am I getting this error message on Final Cut Pro X: "Publishing to Vimeo Failed: The request timed out."? any help is great, thanks.

That would suggest a network problem. It may be transient, so try again in a few hours. If it does not work, try trashing your preferences. In the meantime, there is always a workaround: export a master file, upload using the vimeo site.

When I try to download iOS 6 to my iPhone 4 it says " Verification Failed. Request has timed out". What do I do?

How to download iOS 6 on iPhone 4??. Keeps saying "verification fAiled. Request has timed out"

Try try again. Thre server are heavily loaded. The connection dropped becasue the computer thinks it waited to long. Disabling your security software on the computer can help resolve this too.

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

Facebook timed out while writing a post. Any attempt to open FB, now shows post that was in progress and immediately crashes app. Cannot clear timed out item. Have power failed and done warm reboot on iPad.   Is Delete/Reinstall only option?

Was writing post, as part of sharing article from my newsfeed.   While writing, Facebook timed out. Display cleared. App recycled and returned to newsfeed. This has happened previously and for all purposes, the original post, since it had never been "loaded" onto FB servers effectively was deleted from iPad memory. That appeared to be the case yesterday; as I was able to continue reading, sharing and commenting on other articles.
Later, as I was shutting iPad down for the night, scrolled through open Apps and discovered the original FB window was still "open" I'd apparently been working on a 2nd or mirror version of the app. Attempting to access the original page; it opens, but I am unable to "interact" with the display/app, pressing "cancel" on my original post has no effect. Within 5-6 seconds FB crashes.
I power failed the iPad, left it over night and today am encountering the same problem.   Tapping FB icon, brings up the post that was timed out. It displays for 2-3 seconds max, then original article and partial post disappear. Newsfeed appears to be loading as that and contact columns are visible in light font indicating they are preparing to load.   2-3 seconds, that vanishes. Am left with blue header band, spinning wheel indicating it is trying to communicate or process something.   2-3 seconds and then screen goes black and I'm returned to my app desktop.
If I immediately tap icon to reopen I get white screen, with blue header band.   2-3 seconds, black screen, back to app desktop.   If I wait 2 minutes, I get the full shared article, partial post as described above. I've confirmed in the problem log that this is failing in Thread 0 and showing up as system crash.
Based on feedback to somewhat similar FB problem I found in forum; in addition to doing power fail. I also did warm reboot (Home and Sleep keys) in hope app would reboot along with ios. No change.
At this point, I'm assuming my only viable option is to delete the app and reinstall it from App Store. Easy enough to accomplish. But wanted to see if there were any other recommendations, or whether anyone else has experienced a similar failure with FaceBook.
Thanks for your assistance.

Was writing post, as part of sharing article from my newsfeed.   While writing, Facebook timed out. Display cleared. App recycled and returned to newsfeed. This has happened previously and for all purposes, the original post, since it had never been "loaded" onto FB servers effectively was deleted from iPad memory. That appeared to be the case yesterday; as I was able to continue reading, sharing and commenting on other articles.
Later, as I was shutting iPad down for the night, scrolled through open Apps and discovered the original FB window was still "open" I'd apparently been working on a 2nd or mirror version of the app. Attempting to access the original page; it opens, but I am unable to "interact" with the display/app, pressing "cancel" on my original post has no effect. Within 5-6 seconds FB crashes.
I power failed the iPad, left it over night and today am encountering the same problem.   Tapping FB icon, brings up the post that was timed out. It displays for 2-3 seconds max, then original article and partial post disappear. Newsfeed appears to be loading as that and contact columns are visible in light font indicating they are preparing to load.   2-3 seconds, that vanishes. Am left with blue header band, spinning wheel indicating it is trying to communicate or process something.   2-3 seconds and then screen goes black and I'm returned to my app desktop.
If I immediately tap icon to reopen I get white screen, with blue header band.   2-3 seconds, black screen, back to app desktop.   If I wait 2 minutes, I get the full shared article, partial post as described above. I've confirmed in the problem log that this is failing in Thread 0 and showing up as system crash.
Based on feedback to somewhat similar FB problem I found in forum; in addition to doing power fail. I also did warm reboot (Home and Sleep keys) in hope app would reboot along with ios. No change.
At this point, I'm assuming my only viable option is to delete the app and reinstall it from App Store. Easy enough to accomplish. But wanted to see if there were any other recommendations, or whether anyone else has experienced a similar failure with FaceBook.
Thanks for your assistance.

I am having problems connecting Muse to Business Catalyst. When I try to publish, I get a message saying its timed out trying to connect with my Adobe ID -- and to check network connections. All my connections are fine ... Muse is connected to my Adobe

I was able to publish my site from Muse to Business Catalyst two days ago, but yesterday and today it is timing out when trying to connect to Business Catalyst. What should I do?

Hello,
Please sign out of Muse and Sign In again. Also Make sure Creative cloud application is up to date ( to check that sign out of creative cloud and sign in again if its not up to date you will be prompted to install the update)
To sign out of muse click on Help > Sign Out
If the issue is still not fixed then please rename the "OOBE" folder to "OOBE.old" from the following locations
MAC : (This folder can be found at Finder > Go > Go to Folder> Type ~/library/application support/Adobe > Hit return)
Widows : ( This folder can be found at C:\Users\<username>\AppData\Local\Adobe )
Please let me know in case the issue still persist
Regards
Vivek

Publishing to YouTube Failed: Timed out!

Similar Messages

Maybe you are looking for