Publishing (updating) one website publishes ALL my sites.

I have 5 websites through iWeb. If I add something to one of them, maybe a single picture, and I want to publish the change, I hit "Publish", but it ends up re-publishing all my sites, I can tell because it says what it is publishing and it goes through all my sites. A small update can take minutes to publish because of this.
Also, then when I "announce" web-site through email, ALL my sites are listed. I can delete the others from the email message, but still...
Is there some way that I can make these two annoying things go away?
roger

Hi everybody,
If you have multiple websites that are completely independent from each other and publish to the same .Mac account and use iLife '06 you might have a look at iWebSites
http://mistergregg.com/cocoadrillosoftware/iWebSites/
If you publish to folder have a look at the following page instead
http://multiplewebsites.iwebfaq.org (Chapter 4)
However, just to be sure, no matter what you do you should always make a backup before. Here's how:
http://backup.iwebfaq.org
Regards,
Cédric
PS: I hope I could help you at least a little bit...

Similar Messages

Yesterday I updated to FF6, today all the sites and emails I use, were logged out, that's quite a few, it was a pain to remember all PW's. Why did this happen? Will it reccur?

Yesterday I updated to FF6, today all the sites and emails I use, were logged out, that's quite a few, it was a pain to remember all PW' and user names. Why did this happen? Will it reoccur?

Yesterday I updated to FF6, today all the sites and emails I use, were logged out, that's quite a few, it was a pain to remember all PW' and user names. Why did this happen? Will it reoccur?

Need to update one column of all table in that particular schema

hi all,
i am using db10g.
my task is to update one particular column's value of all the table in that schema.
to acheive the above
do i have to write update statement for each table or is there any way to do it in bulk?
i hope my question make sense.
Thanks..

Hi karthick,
I want to know something which is not related to this thread .
How to include formatted post while replying to thread .
I know using will be used format code before posting . But how can we do it for posted message .
I hope you understand my question .
Thanks in advance .

How to change/update one page and all others at once?

I'm quite new to Dreamweaver. I am trying to add some things to my sidebar and I would like it to appear on all of my other pages. I used a template for the index(homepage) then I just saved the page so I could create other pages for it to have the same logo and such on those pages. So how do I go about editing one page and all others at once?

If you used DW Templates to create your child pages, open your .dwt file.
Make changes to the sidebar.
Save and populate changes to child pages.
Unfortunately, making changes to child pages will not populate to other child pages. Only the master template.dwt in DW can populate changes across to child pages.
Nancy O.

'06 Publish to a folder - copies all my sites to that folder

I have tried to publish the site at the top of the top of the Site Organizer list, but it saves all three different sites to the folder. Is this normal?
Also one of my new sites when published, to Mac of to folder and posted, looses the enter link and the email link on the first page. If I publish from page two, the home page, all the links work fine.
thxs

When I published to a folder and tried to upload via cyberduck / ftp / domain, I was getting errors.
Solution: I isolated the "domains.sites" file, copied it, reopened the copy by launching from that copied file. I then removed the other sites that were second and third inline in the site organizer. Resaved, and published to folder, then uploaded the contents. This worked perfectly.
Do you think I need to do this or have you had success leaving all of the different sites in the one domain.sites file?

Firefox 4 cannot access this one website but all other websites work.

So this happened recently. I use www.thatpetplace.com very often for buy things, but just 2 days ago it stopped loading on firefox 4. It showed this:
Unable to connect
Firefox can't establish a connection to the server at www.thatpetplace.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I don't know what to do. Please help.

Hi cwilkins45,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

How to update a published Muse website on all browsers.

I've updated my Muse site, which works in safari but the updates are not made in chrome. How do I get all browsers to update my website? I'm using a mac and I've already tried inputing different "folder" options (i'm hosting with godaddy). Thank you.

If you update your site, its updated in all(!) browsers.
Perhaps Chromo still has outdated data in its cache. So please clear your browser cache.

Can I publish more than one website to my Mobil Me account? -- Urgent!

I need to create a 2nd website with iWeb and publish it using Mobil Me. Can I do this using my existing Mobil Me account? I seem to be able to publish only one site at a time.
If I need to set up a 2nd Mobil Me account, how do I differentiate the two?
I may need to transfer the original website to another person who would set up their own Mobil Me account. If I do, where are the files for my original website? I would have to copy those for the new person so they could access the site on their own Mac.
Any and all advice greatly appreciated.

Michael,
Your web site file is located in your Home/Library/Application Support/iWeb folder. It's titled "domain.sites2".
You'll want to make sure that you back up this file from time to time otherwise you'll lose all your hard work if your hard drive fails or if this file becomes corrupted for some reason. All of your web sites and pages are all located within this file.
No need to open up another Mobil Me account. You can publish all of your sites from your account.
Gramps.
Message was edited by: Grampa Doodie

IWeb won't publish updates to my site

Hi!
A couple of years ago I made a website with iWeb then uploaded it to an FTP with some other program I can't remember. Now I'm trying to update my website using iwebs publish tool. Everything seems to run smoothly except that when I go to the updated website it's the old one. There are no updates. I tried it from different computers too, it's always the old website.
What can I do?
Detailed instructions for dummies are welcomed since I'm not an expert.
Thanks!

Probably Cyberduck - it might be an idea to download Cyberduck again and use this to look on your server to see exactly what folders and files are uploaded to your server.
Publish your site from iWeb to a local folder and then use Cyberduck to upload to your server.
Also, you state at the bottom of your post that you are using iWeb 08? This is not the case if you say that you are uploading your site using iWeb ftp? iWeb 08 does not provide this so you must be using iWeb 09 instead?

Can I publish more than one website to the net with iWeb?

Hey there,
Looking for help from ANYBODY!!!! I've done one website for my business (Interior design), secured the domain name and published it no problems. Then I designed a second one (medical aid site), secured another domain name but when typed in, it goes to my FIRST website.
Does iWeb allow you you to publish 2 different websites to 2 different domain names???
Any help would be GREATLY appreciated!
Thanx Braden

With iWeb 09 you can publish to different webservers.
Select the Sitename in the lefthand column and either choose MobileMe, FTP or a folder.
If both sites are published on the same webserver, the site at the top of the list is the default one. If both domainnames point to that same webserver, then the default site loads regardless which domain name you use.
With MobileMe you can only have ONE domain name. With other hosts it depends on how you configured the webserver and the domainnames. Usually you can configure your (sub)domainname to point to a specific folder on your website. Check with your host.

How can I publish just ONE site

Everytime I create a new site and publish it to a folder (to place in my own domain) iWeb publishes ALL of the sites every time, no matter whether changes have been made to any site or not.
How do I publish just ONE site?
If I get mobile.me, will I be able to publish just the ONE site I wish to publish?
Phil

I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
OT

WhenI make changes to website, published site does not recognize

Recently I added Pay Pal to my site. Then when I vistied my site I found some of my edited pictures looked as though they had both prior "masks" and current.i.e. oval now looks like oval and square. I even went back and re-ddi the picture edits. They look fine in the edit iweb page, but not the published page.HELP! please.
Denis

i wasnt sure to whether to start a new topic or not but i am having the same difficulty. Here is my problem and information. Any help would be brilliant.
Computer:Macbok Pro, OSX 10.6.8
iWeb version 3.0.4
Mobile me
Everything works perfectly, except one slight glitch when modifying changes in iweb and i publish my saved site to my mobile me hosting (via safari), the published website does not show up like my saved and now published iweb website??
I contacted mobile me, who said "unfortunately that's not actually a publishing issue. This is going to be more along the lines of your settings within iWeb itself. As a MobileME/iCloud agent, I can only assist you in making sure your website publishes correctly. For assistance with the actual iWeb Application, you will need to contact iWeb support directly."
This would be fine although i no longer have apple support in my account, so im stuck. Other changes are showing on teh online site? its just one change which is my navigation menu is showing on two lines instead of one as it is on my iweb application. I have had no error messages come through when publishing my site.
I do not want to re-upload iweb as it works perfectly apart form this, but if it wont change this what will it not change next. Also i have other sites saved on my iweb and i dont want to lose them if u were to install iweb again, not that i'd even know how to.
Any help would be really appreciated, thanks guys.

Site won't publish updates to FTP host after initial successful publish

Hi,
I am having trouble publishing updates to my site. The site is live through an FTP Host and worked successfully the first time. However, when I go in to make changes to the site and click 'Publish to FTP Host' 'All Files', those changes don't take affect on the live site. I have also cleared my cache and am still having the issue.

What do you have in Host directory? Keep it blank and re-publish. The Host directory (folder) on the host server is where your site files will be uploaded. Some hosting providers require you to upload your site to a specific folder on their server and others advise you to leave this field blank.
If the above doesn't help either, please reach out to Muse chat support - http://helpx.adobe.com/contact.html?product=muse&topic=signing-in-to-my-account.
Thanks,
Vinayak

IWeb wont publish updated pages to site using Mobileme

Tried to publish 2 updated pages to my current iWeb site published on Mobileme. Am directed through a Facebook username and password login. (Don't remember this step from prior publishing.) Then nothing happens. No site update. No option to publish site available within iWeb. And no way I see to save my changes made in iWeb before I exit the program to try to figure out. I have lost work twice. What is happening and how do I correct the trouble?

You must have checked the box next to "Update my Facebook profile when I publish this site."
Click the site name at the top of the left column in iWeb to get to the Publishing Settings page to change this.

Javascript won't load for this one website that I frequent. This just started today. All others websites work fine. This site works fine in IE...

Javascript won't load for this one website that I frequent. This just started today. All others websites work fine. This site works fine in IE. I've tried Safe Mode with no success. I have changed nothing since yesterday. Any help is greatly appreciated.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache Clear Cookies & Cache]
* [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
* Make sure that you are using the '''"Remember History"''' setting as described in this article -> [[Options window - Privacy panel]]
Also see these articles:
* [[JavaScript]]
* http://kb.mozillazine.org/JavaScript
Check and tell if its working.

Publishing (updating) one website publishes ALL my sites.

Similar Messages

Maybe you are looking for