Publishing WebHelp_Pro Projects
I am looking for some help viz publishing WebHelp_Pro
projects to RoboEngine.NET.
As far as I can make out, it is only possible to publish
multiple WebHelp_Pro projects as merged projects that share the
same table of contents. However, I would really like to publish my
projects so that they each retain their separate table of contents.
This would allow me to give customers a separate web address for
the Help for each product. Is it possible to do this?
Thanks,
Alan
Hi Alan and welcome to our community
I'm not sure about the .NET version of RoboEngine, but I
think that the regular RoboEngine has a Configuration
manager icon that you can use to configure settings for RoboEngine.
IIRC, one of these settings controls the ability to merge the
projects.
Hope this helps a little... Rick
Similar Messages
-
How do I create a project site after I publish a project in Project Server 2013?
How do I create a project site after I publish a project from project pro 2013 in Project Server 2013? I'm trying to look for an option in the ribbon but haven't found any.
Thanks
James T.FHi James,
See in the article the procedure for site provisionning settings.
Note that the project site is created based on the template associated to the chosen project type (EPT) when the user first publishes his project. Be aware that if you allow the user to choose weither or not he'll create a sharepoint site when publishing
his project, he will be prompted in Project Pro with a dialog box giving the choice to create or not the site.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
How can I publish a project so that the link to embedded flv is not lost?
When publishing an Adobe Captivate 3 project, the embedded flv file does not play.
How can I publish a project so that the link to embedded flv is not lost?I am not really sure, if I understand you right. But try this:
Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
(Don’t click onto the color swatch, but onto the blue link "Fill".)
In this case responsivness should work. -
Cannot publish iMovie project paramerr: error in user parameter list
When trying to publish imovie project, getting message:
Unable to prepare project for publishing.
The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
Can anyone help explain what to do? My first project.
Thanks!
RickHi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
Get this message when I try to publish my iMovie project. "unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)"
See the discussion here:
https://discussions.apple.com/message/16784714#16784714 -
Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space? -
I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"
Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work. -
I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP
oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those
-
Hi All
When creating and publishing a project in PWA(server 2010) need to send a mail alert to the concerned project manager.
How can i achieve this..
I have configured the outgoing mail sending in sharepoint and its working fine now.
Please help me..
Thanks Advance
SharePoint Module Lead Assyst International Private Ltd Cochin IndiaNothing is built in Project Server to do this for you automatically.
They way I have done this in the past is to create a SQL job using SSIS. It runs every hour and when it sees a project schedule that has a recent PUBLISHED date then this is a trigger to send an email to project manager.
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Every time I try to export or publish my project it result in a error and closing de program, any idea ???
Hi,
That link takes you to the Facebook for iPhone app.
You have posted in the Mac App Store for Mac OS X. (I know it's somewhat confusing especially with the new forum format).
Try deleting the Facebook app from the iPhone by pressing down on the app on the iPhone until it jiggles then tap the circle with an x in it. Then tap the Home button to stop all the apps from jiggling.
Now tap the App Store icon and and re download the Facebook app again.
If that doesn't make a difference, post over in the iPhone Discussions forum at this link.
https://discussions.apple.com/community/iphone/using_iphone
Carolyn -
Publish a project automatically in a workflow
Hello, all!
I have a complex Project Server 2013 workflow. The workflow is created using SPD2013.
On some stages the workflow sets Custom project fields value. This value stays Draft until user hasn't publushed Project manually using PDP or Project Prof.
How I can autopublish a project in the workflow?
I've spend some time trying to use "Call HTTP Web Service" activity (REST endpoint /pwa/_api/ProjectServer/Projects('projectid')/Draft/publish) by I cannot make it work.
I've created a console application which publishes a project but how I can use it in a workflow?
Maybe I have overlooked some obvious solution.
Any help will be greatly appriciated.
Thanks!Hi Ildar,
See the reply in this
similar thread by Alexander Burton.
And
here to publish a project programmatically.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Project Professional 2010 Not Publishing to Project Server 2010
I am having trouble publishing a project from Project Professional 2010 to the Project Server 2010 (PWA). What I am trying to publish is a master project which is contains many enterprise projects as subprojects. When I press publish, it prompts me
to save and if I click yes then it goes through and saves all the subporjects and then just stops there and doesn't publish the changes to the master project. If I press publish and click no to the save prompt then it gives me the status "sychronizing
data to server" for around 15 seconds and then just does nothing after the sychonization finishes.
It usually should be giving a "publishing job done 0%" or "publishing job completed" when it publishes, but it gives nothing like that. I also check the project through the PWA and it has not updated yet, but when I open it for editing in the client it has
everything updated and up to date, meaning that the save is working properly and just not the publishing.
All my subprojects are able to publish correctly, it's just this master project that is not working.
Does anyone know why this is happening? Is the publishing process timing out for some reason? Or is it something else?
Please help.
EDIT: The progress notification at the bottom of Project Professional just stops at "save completed sucessfully" whenever I try to publishTo check the queue, navigate to Server Settings > Manage Queue and view the jobs that are present. If there is an error when publishing you should see it in the queue.
Alex Burton
www.epmsource.com |
Twitter
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page -
Export PDF in Captivate 5 and Publishing CP4 project in CP5
When I publish flash (swf) videos in CP4, I always tick the "Export PDF" option to also get the PDF version - and then offer the PDFs for download as an alternative to watching online (or send them via e-mail).
I have learned to live with the fact that the PDF version - sadly - becomes somewhat blurred. But now, as I am trial testing CP5, I see that besides blurring, the video in PDF gets also distorted - if this is a good word for it: As the software screens change in the video (I record software demonstrations), the new screens show some left over graphics (mainly lines or points - as if remnants of borders of objects, lines, shadows, etc.) from the previous screen.
The similar thing happens when I publish CP4 projects with CP5 (which I want to do as the Neospeech voices sound much better in CP5) - I see the same leftover graphics, mainly in the full-motion segments.
Any suggestions on avoiding these issues?Hello and welcome to the forum,
For this purpose you need Acrobat Pro, could you let me know if you have this app? It is coming with the eLearning suite. To export a Captivate file to pdf you do not need it.
Lilybiri -
Video not displaying correctly in published presenter project
So I created a presenter project that is basically a series of video clips. I went in and replaced one of the video clips, and when I republished, all of the sudden the video was cropped weirdly and filled up one corner of the screen instead of the entire section. Any ideas on why this is happening? In the powerpoint view, the video should cover the entire slide, it's just when I publish it for playback that this problem appears.
when you publish a project, other files that you did place manual in the folder ( like video files), don't get inside the published files, you have to copy the video from the source files to the published files
Maybe you are looking for
-
HP 8600 Printer Will not see printer when scanning.
I am using an HP 8600 Printer. It is connected to my computer and prints just fine. I am also able to scan from my computer. However, when I go to the printer and select "scan" then "computers" my computer is not listed. I never had a problem wit
-
Help me!
-
Mistakes between APC 2009- end and 2010-start
Hi experts, I found a lot of assets, where are mistake between APC transaction Year-end 2009 and APC transaction Fiscal year start 2010. I recalculate value for one of them and is OK. I have more assets with mistakes between 2009 mand 2010. I haven'
-
hi guru, can any one give me some important fm used in crm.
-
Calling separate LSMW steps from ABAP program
Hai all, anybody know if I can call sepearte LSWM step from a ABAP programm, I only need to: Specify Files Import Data Convert Data Create Batch Input Session Run Batch Input Session Need this steps so i can provide backoffice user a tool which impor