Publishing with AC2 to create 1 flash file

I am working with a CMS that can work well with flash files
individually. They tend to be rendered just fine (therefore I get
to bypass the html export). Upon trying Adobe Captivate 2, the
publish feature creates 2 flash files (and others, but later on
that) - one for the skin, one for the content. Is there some way to
get AC2 to publish the skin and content into one file? Or am I
going to have to do that in Flash 8?

Larry
I am new to this forum and have found helpful information for
problems I have had, posted from you and others. Thank you and the
others for your volunteer help. Volunteer service is not always
rewarded. I do want to say for myself and others, you are
appreciated.
Though, I have noticed a trend in several of the threads.
Especially when information is provided to new users.
You asked
"What more could I have done to be nice (enough) for your
highly cultivated sensibilities?"
You could have simply left out the following in your reply:
"I've been around for years, and am having to "guess" at what
your intent is, so you can imagine how many folks might have even
less clue than I, and they might also know the answer, if they
could understand the question."
I sense a need for you to bring up that you have knowledge of
the product and volunteer your help at every turn. Simply providing
the answers to the problems will send the same message.
You obviously understood the two acronyms used. andKlinger
even spelled out Adobe Captivate 2 in the sentence preceding the
one in which he used "AC2." I would think on a forum where CMS,
LMS, SCORM, SWF, HTML, JS, and many others are used, we could
simply put an assumption statement in the response.
Your choice of paraphrasing one of the most arrogant
characters in movies is informative.
"Intelligence trumps muscle, Imagination Trumps Both!"
Arrogance shuts the door to communication.
Let's make new users feel welcome by toning down the
commentary and just try to help.
It is ironic that after many of dressing downs you follow it
up with "Welcome to the community."

Similar Messages

  • I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method?  alternate method? I have Adobe Ac

    I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method?  alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

    Yes, I just want to cover up all the pages for those particular area of document numbers.
    Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
    So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

  • Having a hard time with permissions to create dir and files in www

    Having a hard time getting permissions to create directories and files in www folder:
    I followed the following guide here: https://www.digitalocean.com/community/ … arch-linux and here: https://www.digitalocean.com/community/ … arch-linux
    So now I have a LEMP stack which runs fine and I have my root account secured and a new username "adriano". If I SFTP into the server using the username adriano, I am unable to create any files or directories. Trying to do a simple wordpress install doesn't work because I need to be able to create a folder for it, and a wp-config.php file. Both of which, like I mentioned, I do not have permissions to do. Yes, the username "adriano" has been added to the sudoers file via visudo.
    I've never been very good at UNIX permissions so I was wondering if maybe someone can help me out?
    Also, since I am using nginx it does not seem like I have a www-data group or user and my www folder is /usr/share/nginx/
    Thank you,
    AJ

    No, no, you guys misunderstand me. I am not that much of an oblivious person. 95% of the time I understand EXACTLY what the code that I am copying and pasting does. And when I don't, I look into it further before executing said commands. I just tend to not remember commands so I google them, see examples, and then copy and paste them to avoid the busy work of typing out long strings. For example, it took me like 6 months to remember that to untar a .tar.gz file it was -xvfz.
    But I digress. drcouzelis, I do have root access. It's my own VPS. However, I have always used shared hosting through different hosting providers and now that I got a VPS and have to do everything myself, I am a little bit lost.
    I followed what wonderwoofy said and created a www-data group, added the adriano user to said group, and changed the owner of my http server root to www-data, and I SFTPed into the server again with filezilla and it still works perfectly. However, those "hordes of hackers" drcouzelis warned me about does not sound pleasant so I am really really really hoping one of you guys can tell me the next steps. Root login is disabled in the /etc/ssh/sshd_config file, and I also changed the port to a random port I created. My web files are all served from /usr/share/nginx/ (there are different folders in there that correspond to different domains.) Now what I am wondering is that if user "adriano" is in the sudoers file as ALL=(ALL) ALL, doesn't that pretty make adriano the same as the root user? The reason why I am so worried about this is because I heard/read countless times that working through the root user is BADDDDDDDDDD and will bring evil and shame upon your life (not in those exact words) and that you should never work with it. Also, do I have to worry about anything dealing with groups and/or users and/or permissions when it comes to PHP? I have php-fpm installed.
    I am willing to buy anyone who can help me out with this a beer or two and I will be forever in your debt.
    Thank you,
    AJ
    Last edited by AJCR (2013-05-23 02:52:03)

  • 11g SOA with AIA suddenly creates huge temp files(sar files)!!

    Hi All,
    One of our clients that is on 11g SOA with AIA, the team observed while deploying applications, that it suddenly creates huge temp files(sar files) and the server slows down and then shuts down, has anyone seen such behavior or possible reasons?
    If anyone could share such prior experience would be apreciated!
    Thanks for your time!
    Regards,

    Hi Ajay,
    Could you check the managed server logs on the server you are deploying to? I prefer the soa_server1.out file if its available. Hopefully there is something more telling on that side.
    My gut feeling is that there is a schema required by the ProcessFulfillmentOrderBillingBRMCommsAddSubProcess process has not been deployed (which sometimes happens with this PIP in particular).

  • Pausing Captivate 6 with a swf created in Flash Pro

    Not sure why my code isn't working but I've tried a few different things based on what's worked for other people. The code is placed on the frame where I need the interaction to pause. None of them appear to be working. I have a custom Flash interaction that the student needs to complete before continuing with the course.
    Here are the things I've tried:
    MovieClip(root).rdcmndPause = 1;
    var mainmov:MovieClip = MovieClip(root);
    mainmov.rdcmndPause = 1;
    var myRoot:MovieClip = MovieClip(root);
    var mainmov:MovieClip = MovieClip(myRoot.parent.root);
    mainmov.rdcmdPause = 1;
    FYI, I've tried both rdcmndPause and cpCmndPause for each of the above. Anyone have any ideas? Also, I'm getting ready to upgrade to Captivate 8. Have they made it any easier in that version to do this sort of thing?
    Thanks,
    Jeff

    in frame 1 of my fla source code, i used this var and event to interact with the captivate variables:
    var captivateVariables:*;
    addEventListener(Event.FRAME_CONSTRUCTED, isAdded);
    and then this function:
    function isAdded(e:Event){
      //txt.appendText("isAdded\n");
      removeEventListener(Event.FRAME_CONSTRUCTED, isAdded);
      try{
      captivateVariables = Object(parent.parent).getMovieProps().variablesHandle;
      //txt.appendText("captivateVariables: " + captivateVariables.cpCmndPause + "\n");
      catch(e:Error){
    and then i inserted it onto a captivate slide in frame 1.
    note: txt is a dynamic text area i put on the flash stage so i can see what was happening, since there is no trace statements coming from a running captivate file.

  • Need help with multiple links in one Flash file

    Hi, I have to do a banner which is basically 4 different
    slides that fade up and down, but the client wants each slide to
    link to a different place when the user clicks on it. I know how to
    create an invisible button to link the whole ad, but how would I
    link each slide? Thanks in advance!

    Am I getting no replies because this can't be done in Flash?
    Is there a better way to do it? Actionscripts perhaps?
    BTW, I'll have no access to the html page that the client
    will be putting the swf file on so I wouldn't be able to put any
    code around the file for linking, like if I did a bunch of jpg's
    and found a script on the web somewhere that would fade them up and
    down and link them. They want the linking built right into the swf,
    is this even possible? Thanks in advance!

  • Trying to write an Automator program to find files with same time created and change file names to matching source folder names

    I am failrly green when it comes to automator.
    I am trying to write an Automator program:
    Not sure where to post this
    trying to write an Automator program to find files and alter their names
    I have a source folder with correct named master files in it.
    eg. A0001_1234.mpeg
    time created 14:02:03
    date 07/07/2012
    Another folder where there will be copies of the master files in a different format with different names but created at the same time as a file in the source directory.
    they are created with a seperate device but they are
    A0000001.mp4
    time created 14:02:03
    date 07/07/2012
    I need it to then take the name from the source fies and apply the correct name to the matching file based on the time it was created.
    I can't seem to find actions in automator that reference time crated.
    Is this something I will be able to Do in automator?
    Any help would be great
    Thanks
    R

    Hi,
    It's impossible to do this without any script in Automator.
    Use this AppleScript script :
    set source to choose folder with prompt "Select the source folder"
    set anotherfolder to choose folder with prompt "Choose the another folder"
    tell application "Finder"
        repeat with tfile in (get files of source)
            set cDate to creation date of tfile
            set findFiles to (files of anotherfolder whose creation date is cDate)
            if findFiles is not {} then
                set tName to name of tfile
                set name of item 1 of findFiles to tName
            end if
        end repeat
    end tell

  • Option append with spool command create tow different file.

    I have this situation:
    DEFINE USERNAME=PIPPO
    DEFINE VERSIONE=02.02.02
    spool &USERNAME_file_&VERSIONE.log
    ---do some stuff
    spool off
    spool &USERNAME_file_&VERSIONE.log append
    -- do some stuff
    spool off
    Oracle doesn't append things in the forst log. byt create two log:
    pippo_file_02.02.02.log
    pippo_file_02.02.02log.lst
    I also try with:
    spool &USERNAME_file_&VERSIONE..log append
    Why

    Hi!
    Have you tried to use double quotes around your filename?
    spool "&USERNAME_file_&VERSIONE.log" append
    Oracle recommends using double qoutes around filenames.
    Hope this helps!

  • Create two or more flash files from one (Excel) data source

    Hi experts,
    I have the following requirement about Xcelsius.
    Our data source is a relational database. Via the ODBC driver we manage to create several queries and execute them into Microsoft Excel. Those excel sheets are the basic for the Xcelsius reports.
    Now we want to build some highly visualized reports on that, but the crucial fact is. We don't want to have all the reports in one FlashFile, but we need several flash file depending on the area of the queries.
    Hence our requirement would be one of the following points:
    - create multiple flash files from one .xlf
    - create multiple .xlf from data source
    Another requirement is the automatic execution of the process. We don't want to have a person in between, who has to call all the .xlf files to create the Flash reports step by step. What we need is an automatic process.
    Can this requirement be fulfilled in a way?
    Maybe by using the Xcelsius SDK?
    Thanks for any helps and comments!
    Sebastian

    Sebastian,
    Firstly talking about the important requirement i.e. automating the process:
    In your case you can achieve this by using the XML maps. This will pick the data automatically when ever report is refreshed.
    Secondly, both the approaches are correct, however i would go with the first one.
    1. Create multiple flash files from one .xlf
         You just need to create one dashboard and have a filter on areas (Invisible) and then export to flash (for every area).    
    2. Create multiple .xlf from data source
         This approach is also fine, however you need to create multiple dashboards and do the same thing i.e filter data based on area.
    P.S. Did you get a chance to explore options to integrate Xcelsius with your Relational Database, this will be much effective.
    -Anil

  • Flash file not publishing

    Flash newbie here. I've created a flash file, and the intrux
    suggest to save, check the Publish Settings that they are correct,
    and then click okay. (Okay, I've done this numerous times
    ) I then click on "Publish", but instead of getting
    the next dialog box, the dialog box flashes briefly (pun
    unintended) on the screen, and then disappears. The file(s) show up
    in the Dreamweaver files palette however. I've tried uploading the
    file.swf and the file.html, but the browser only displays a broken
    gif. The animation tests okay in the <Control><Test
    Movie> exercise, so what am I doing wrong to have the publish
    dialog box display for a split second and then disappear?
    Thanks in advance,
    Michael

    Please ask in the Flash forum, this forum is for discussions
    about the SWF
    format and open solutions, not about flash (the authoring
    tool). You'll get
    better responses when you ask in the appropriate places.
    Jeckyl

  • Adobe Encore Flash Files - Creating Clickable Links

    I created a flash file from Encore CS5 with a menu created in Photoshop.
    Two asset types are included on the menu:
    1.) .tif files created from word .docx pages (FAQs and Info) and put into slideshows that are accessed by menu buttons
    2.) .f4v video files exported from Premiere, encoded using Media Encoder, and put on a timeline that is accessed by menu buttons linked to chapter playlists
    My 2 questions are:
    1.) The tif files have text that contains weblinks. Can I create flash files in Encore that allow the weblink text to be clickable?
    2.) The vid files have frames with text that contains weblinks. Can I create flash files in Encore that allow the weblink text to be clickable?

    Here is the relevant part of the help file:
    http://helpx.adobe.com/encore/using/exporting-projects-flash-format.html#embed_web_links_i n_your_flash_project
    I think the answer to both questions is "no." The help file implies that only a button can be a web link.
    Has anyone tested this? Can you confirm or correct my understanding?

  • Flash File not working with DW

    "Content on this page requires a newer version of Adobe Flash Player"
    I know others have had this same issue, but after researching and trying everything, I am just not able to fix it.  Anyone out there have any ideas?  I have a website created in flash.  I used DW to import the flash file and upload to the server.  Very simple html page with nothing else but the flash file.
    Here is the website. www.meghanmcmehon.com.  Just need some help here.  Thx.

    Source code indicates that the page is still pointing to a local file for the flash content,
    <param name="movie" value="file:///Macintosh HD/Projects/Matrix Entertainment/Christopher Zurek/3422ZRK Media Files/Site/root.swf" />
    so by default it displays the "get flash" prompt.
    You need to change the all of the reference(s) to point to a file in the root folder, and re-put the page. This includes your javascript ref in the header:
    <script src="Macintosh HD:Projects:McMahon, Meghan:3481MCM Profile:3481MCM Media Files:Site:Scripts:swfobject_modified.js" type="text/javascript"></script>
    Also, you should only work in lower case wherever possible (naming files), to avoid mistakes in file references.

  • Flash files with right click imported in dreamweaver files

    Flash files created with Captivate which contain rightclick
    functionality are imported to html files created in Dreamweaver. In
    other words, I don't use the html created by Captivate but another
    html file to build up a whole course. But now a couple of those
    flash files contain a right click and obviously I have to adjust
    the dreamweaver file with some of the script that William Heinz has
    created. I am not an HTML expert and I am not 100% confident that I
    can do with just endless try&error. Could anyone give me some
    hints?
    I suppose I need to use the second bit of William's article
    "the more complex requirement".
    When I insert the flash file this is what I get: (This is
    where I am suppose to make the changes????)
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','746','height','591','title','Schedule
    Let
    Me','vspace','5','src','Resources/Sched_LM_skin','quality','high','pluginspage','
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','Resources/Sched_LM_skin'
    ); //end AC code
    </script><noscript><object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
    width="746" height="591" vspace="5" title="Schedule Let Me">
    <param name="movie" value="Resources/Sched_LM_skin.swf"
    />
    <param name="quality" value="high" />
    <embed src="Resources/Sched_LM_skin.swf" width="746"
    height="591" vspace="5" quality="high" pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash"></embed>
    </object></noscript>
    I am not sure what to do with the "<Body
    onload='javascript:init()..... "etc as suggested by William.
    Thanks for any advice on this!!!

    I hope there is one person out there who can help me with
    this issue.
    I have started from scratch and created a blank html with
    dreamweaver and inserted the flash file (with right click
    animation) created with Captivate.
    Then I made the adjustments as per Heinz and also included a
    ID=Captivate1 as the RightClick.js refers to that.
    The main difference between this html file and the html file
    created with Captivate, is that the Captivate one also has
    writedocument bit.
    Anyway, is there anybody in the world who can give me
    atip/hint/suggestion?????

  • Problem with loading flash files in applet

    hi
    using JEditpane i can load html pages but it's not supporting gif and flash files.is there any way to open a html page which contains flash and gif files.
    please help me...

    jeditpane does not support flash files etc, i am not sure if it even support applets if yes probably with some limited way, anyway flash files are not supported, but you can lanch system web browser to show content with flash like internet explorer, latest mustang will suport this

  • Interactive layers over an interactive flash file

    I've always been frustrated at the fact that dynamic text and
    images pulled into flash have not been able to be spidered by the
    search engines.
    So, with a client site I'm developing, I'd like to try
    something different. I'm wanting to create a flash file with
    buttons that when clicked, open up the flash and create a blank
    area in the design where a div layer can be placed on top of the
    flash, positioned in such a way that it looks like it is part of
    the flash itself. When you then click on a seperate button on the
    flash, the div layer hides itself, and another div layer appears
    according to the relevant section of the flash you have chosen.
    I might not be explaining myself very well, but for anyone
    following what I'm sayinig, has this been done before and does
    anyone know how?
    Cheers,
    Guy Blomberg

    Well the easiest way is to publish it to a swf and then perhaps load all of those dynamically.
    The only other way I know is to select all the frames, copy frames, insert a new movieclip and then paste frames. This usually results in centering everything and you might not like that.
    If you want to avoid that you should include a background layer the size of your stage. And then you can edit multiple frames, stretch the range makers to cover the entire thing, select all, and adjust the upper right corner to where you want it. (Assuming that you don't have things off stage.
    Of course the best thing to do would have been to just made them all as movie clips from the beginning. Either in one FLA or in individual FLAs. So chalk it up to live and learn.

Maybe you are looking for