Publising Issues with updated pages

Ok. I've just taken over the editing of a website created in
Dreamweaver. I downloaded DW MX 2004, and have been using it to
edit the files. I have a PC. The updated files were uploaded to the
site just fine. However, I'm training the owner of the site -
helping him learn how to do it himself - and when we went to
publish from his MAC with DW 8, it looked like it uploaded, and
i've Cleared the cache, but it's displaying the old files, not the
new...
Any ideas? At this point, Im considering burning the site to
a disk, putting it on my PC, and publishing it from there. HOWEVER,
that wont work forever. He needs to be able to publish from his own
site! Any ideas?
THANKS
ps the site is www.tomrea.net

Is there a testing server in his site definition? Perhaps he
was publishing
to that rather than the remote site?
Is the host directory properly specified? If not, then the
files were
uploaded to the wrong destination.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"holeoz" <[email protected]> wrote in
message
news:f8j64g$3hd$[email protected]..
> Ok. I've just taken over the editing of a website
created in Dreamweaver.
> I
> downloaded DW MX 2004, and have been using it to edit
the files. I have a
> PC.
> The updated files were uploaded to the site just fine.
However, I'm
> training
> the owner of the site - helping him learn how to do it
himself - and when
> we
> went to publish from his MAC with DW 8, it looked like
it uploaded, and
> i've
> Cleared the cache, but it's displaying the old files,
not the new...
>
> Any ideas? At this point, Im considering burning the
site to a disk,
> putting
> it on my PC, and publishing it from there. HOWEVER, that
wont work
> forever. He
> needs to be able to publish from his own site! Any
ideas?
>
> THANKS
> ps the site is www.tomrea.net
>

Similar Messages

Issue with Update of Table VARINUM

Hi,
I am getting waiting Issues with Update of table VARINUM. Has anybody faced such an issue.
I have a lot of Jobs which are running in background. I am submitting it through a report. what can be the issue.
Regards,
Abhishek jolly

Thisi is quite old, but not answered properly yet, so there you go:
SAP generates a new job and temporary variant on report RSDBSPJS, for each HTTP call,which creates database locks on table VARINUM .
This causes any heavyweight BSP application to hang and give timeout errors.
The problem is fixed applying OSS note 1791958, which is not included in any service pack.

Any other realtors having issues with updating their Suprakey on their Android?

Any other realtors having issues with updating their Suprakey on their Android?

The follow is from clicking on that error number in the article cited at the end of my post:
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
iOS: Resolving update and restore alert messages

Having issue with update Adobe 11.0.06. Error 1603.

Having issue with update Adobe 11.0.06. Error 1603.

You should have gotten this information with the error: "Shut down Microsoft Office and all web browsers. Then, in Acrobat or Reader, choose Help > Check for Updates. See also Error 1603 | Install | CS3, CS4 products." Also, be sure you log in as the administrator and disable anti-virus.

Having issues with update to iOS 8

Having issues with update to iOS 8, wheel keeps spinning with 9 hrs remaining to complete update. What are my options?
<Re-Titled By Host>

I am a windows/mac user... And I was Linux user for several years... And so far I have been really happy with apple but this problem is frustrating.
I don't understand:
1)Why can't I go back to iOS7 since this was apparently the most stable version for my iPad ?
2) Why is apple not doing anything about it, ?
3) If the problem is that my iPad's can't fully support the features of iOS8, why on earth have they made it available to iPad 2?
Any way, I will just wait a bit longer and probably start looking in to a Samsung tablet or something....
Cheers,

Having an issue with a page in the internet

Hello,
I registered to the forum a few days ago but did not introduce myself. Please accept my apology.
I have a Blackberry style 9670 model, of which I am very happy with.
I was having an issue with a page in the internet, in which I was receiving errors on my device. My daughter has a Blackberry Curve and she was able to access the page without any errors. I can not figure out why I do.
Thanks

I am not sure if this is the same issue but there was a bug that caused small exchange numbers to become negative which was resolved in one of the 11.1.1.3 patches, it is worth logging into My Oracle Support and having a look at the patches available.
9588147 – In exchange rates table, entering very small values become negative after you save the data forms. For example, 0.000071 becomes –7.1E-5 after you save the exchange rate.
Cheers
John
http://john-goodwin.blogspot.com/

Issue with updating Security Info on my Microsoft ID

I am stuck in a vicious circle trying to sort an issue with my Microsoft account.
I need to remove an old, defunct, email address and add a load of new security info however, depending on whether the date format on the page I keep being directed to is UK or US, either the updates haven’t happened or they won’t
be happening until next month – which seems ridiculous!
I’m trying to sign up for a Windows Store developer account to publish a Windows 8 app. I’m using my MSDN subscription to register for this (for free) but there is a step I can’t get past because it insists on sending a code to
my old email address – to which I have no access. It is picking up this address from my Microsoft Account Security info – however, I updated this info weeks ago. This is the screen I see (I’ve blurred out some of it as it seemed foolish to publish all my security
info J
It says my old address will be removed on 03/04/2013 and my new info added on that same date. Does anyone know if this is UK date format 3rd April – in which case it’s a long wait or a US date 4th
March in which case it didn’t happen? I’ve tried phoning 5000 and the Microsoft Customer support lines but neither of them have a clue where to start. They just keep asking me if I’ve forgotten my password – which I haven’t.
Does anyone know how I can resolve this? My only option at the moment is to wait until 3rd of April and see if anything changes – which is not ideal.
Cheers,
Rob

Hello,
The Microsoft account forum has been retired and all account related questions must now be asked online
here.
Select the issue you need help with and fill out the requested details on the next page.
You need to be signed in with a Microsoft account to access the form. If you are unable to access your primary account, you can use an alternate account (if you have one) or create a new one at
https://signup.live.com
You can read further information about blocked accounts
here.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Torch 9800 Issues with updating software

Hi there I'm new to this forum and to BB.
I have been having issues with my Torch for a couple of weeks now, firstly I had issues with it when it was charging the red light and not coming on, but managed to get it to work after a bit of searching on here.
This happened regularly over the past week, then today I have the Error 507 message.
I have used Desktop Manager v5.0.1 to try and update it but I didn't have the password for the phone and after 10 attempts it wiped the phone which I wasn't really bothered about.
I am now trying to update the software but when I get to the Device Application Selection page it says that I have don't have any space left.
Is there any way around this so that I can update the phone's software?
Any help would be much appreciated.
Clwyd

Hi! Welcome to the forums.
Please keep us posted and goodluck.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Issues with updating app

I recently had an update for my Verizon Backup Assistant app, I hit download and put the phone down walked away like I normally do, cam back a few hours later and it still said waiting and the app was transparent. I waited a little bit longer and it still said it. It has been three days and it still says waiting and other aps have updated just fine so I have no idea what is going on. I looked at other threads on here and none of the solutions have been working, I restarted the phone, turned it off and then back on, went to my old pc and tried to delete it from there but that did not work either. When I use my macbook the apps do not show up in that list so I cannot uncheck anything from there, it just shows the image of the phone screen but when i hover over the app with the cursor no X pops up either. Even on the PC its removed from the list but still on my phone screen. I have tried everything even resetting my prefferences on the phone and nothing is working for me it just sits there, which isnt a big deal I just do not understand why I cannot delete it.

Have been to Library, and looked in Receipts/InstallHistory.plist
This plist confirms that on 27 Jan App Store downloaded Pages version 5.0.1 again (actually for the third time it appears), although it was supposed to be downloading version 5.1. My App Store/Updates page says version 5.1 was installed (which it isn’t). Same issue for Numbers.
The plist also confirms that the App Store forced me to download the same version of iPhoto in December and Today.
Keynote and iMovie (not one of the iWork) won't open until I download again, but do not have the internet capacity to redownload these large files again and again.
So far iTunes, Aperture and iBook do not seem to be affected. By the way have done simple things like restart, repair permissions etc...
Are there some files/applications that control the downloading of new versions that might be malfunctioning?

Issues with updating Apple apps with app store

I have begun to have issues with (all?) Apple apps and App store. including not updating after download, and repeat downloading. Two examples:
I had Pages 5.0.1. 3 days ago I used the app store to download Pages 5.1. This downloaded OK (watched the volume of data on Net Monitor). Although my Pages works OK it remains on 5.0.1, although the App Store shows that 5.1 has been “installed in the last 30 days”, and does not offer any further update. Same scenario for Numbers 3.0.1 and 3.1.
on the other hand
Keynote, iMovie and iPhoto won’t even open at all now, if I try to open them I am directed immediately to Apple sign-in in the App Store. Keynote and iMovie show updates available, but not iPhoto. I signed in when I tried just now opening iPhoto, and it immediately starting downloading the software again. I think my iPhoto was 9.5.1, downloaded in December and working fine since then.
I have access only to limited slow expensive broadband. This is taking my whole monthly allowance.
Is there some updating controlling software or file on the HD that could be corrupted?
Any ideas?
Thanks

Have been to Library, and looked in Receipts/InstallHistory.plist
This plist confirms that on 27 Jan App Store downloaded Pages version 5.0.1 again (actually for the third time it appears), although it was supposed to be downloading version 5.1. My App Store/Updates page says version 5.1 was installed (which it isn’t). Same issue for Numbers.
The plist also confirms that the App Store forced me to download the same version of iPhoto in December and Today.
Keynote and iMovie (not one of the iWork) won't open until I download again, but do not have the internet capacity to redownload these large files again and again.
So far iTunes, Aperture and iBook do not seem to be affected. By the way have done simple things like restart, repair permissions etc...
Are there some files/applications that control the downloading of new versions that might be malfunctioning?

DW CS3 locked files and FTP issues - cannot update pages

I just upgraded to Dreamweaver CS3 and now cant seem to
update any of my web pages. I can connect to the server etc and see
my files locally & remotely but when I try check out a file to
update it I get an error message saying 'index.html is a locked
file and can be viewed but not changed'. All I can do with it is
view it. When I try to unlock any files locally nothing happens????
This was not an issue before I upgraded.....I have checked my
FTP details with a version on my pc and there are exactly the
same.....does anyone know is this an issue with mac version of
Dreamweaver CS3?
Help!!!

Can you post a link to your child or template page and tell
us what you have
changed that didn't propagate?
Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done). If
you *have
done this*, then recreate the child pages (in DWCS3) using
FILE | New > Page
from Template, select the template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
By the way, this is not an official communication vehicle to
Adobe. We are
all just volunteers and peers here.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"gwbusiness" <[email protected]> wrote in
message
news:[email protected]...
> Hi honeybugs,
>
> I am having the same problem and I need a global fix so
that I can
> immediately
> update my site . . . did Adobe help you? This did not
happen immediately
> to my
> files but my template does not now update pages . . . I
am desparate.
>
> Thank you,
>
> Gail
>

Issue with normal page link redirecting to SSO page / forbidden page

Hi,
I am having an issue with a number of pages within my portal.
I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
Just lately a number of pages that are linked to within this list are not loading correctly.
When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
(This page will also show up after the user tries to login when the page is redirected to the SSO page).
As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
Any help is greatly appreciated!!
Amanda.

Figured it out...

Issue with update of BOM by Variant Config - Cost relevant indicator

Hi All VC Expert,
We are facing an issue with the update by reference characteristic of the field STPO-SANKA Cost relevancy indicator on the BOM.
We are on SAP ECC 6.0 release 700 on Oracle
Hot Package
- SAPKA70015 on ERP Cross Application componenent
- SAPKH60013 on SAP-APPL Logistics and accouting
We are using material variant
We are on the first level of configuration
Classically, we built a procedure to set X to this data base field as below :
$self.STPO_SANKA = 'X'
We assigned this procedure to the relevant items
Here is the result we have:
At the creation of the Plan Order, this is not working
At the creation of the Prod Order, this is not working
When we do a Reload PP master data, this is working very well
On CU50/VA02 when we check the trace, the procedure is executed.
Do somebody have an idea or already facing this and solve it ?
Thanks in advance for your appreciated help.

Hi Fabien. Did you solve your problem?

I'm using Firefox 3.6.23 on my windows 2000 and lately i've been having issues with web pages loading and need help figuring out why.

Some of the issues : '''1'''. Page loads blank showing web address in tab. Try reloading usually with no results.(problem have the most!) '''2'''. Message appears "problem loading page, server not found" (diff times & diff websites). '''3.''' Pg with msg "oops link broke, DNS error, server not found" then lists suggested links to sites for fix though all links connect to site IGEARED.COM. (new issue) I don't know what to do please help me identify and fix my issue(s) in english, kind of a newbie : ). thx

Try this.
Type in the address bar about:config.
Accept the warning.
In the page that appears, in the Filter box, type network.http.max-connections. Change the value to 32 (which is probably set to 256 in your case).
Close that page. Restart the browser.

Issue with update to 10.6.5 and WIFI connection

I have been having an ongoing issue with my MBP over the last 6 months and even more consistently within the last several weeks.
I have searched the other posts and I think that I might be making a connection here. So, please chime in if you have anything to add to solving or addressing my problem as I think that there are others out there suffering.
Issue in short: Waking my MBP from sleep mode or turning it on loses my connection to my WIFI that is password protected.
Mainly when I wake my MBP from sleep mode this occurs a lot.
I have contacted AppleCare many times and have taken my computer to the Genius guys and I have done the following:::
Genius guys tested the computer and could not replicate. No hardware issues found, must be a software issue.
AppleCare, done many things to reset the computer, re-installed Snow Leopard, deleted Caches and other things.
Now, I am wondering if there is something actually due to the OS updates after 10.6.2 or 10.6.3 that is causing my issue that much more.
I can see my wireless router as available to join, I select it, type in my password, and it states invalid password. Try to restart, reboot, and nothing. It almost appears that it loses the sync between my keychain and such.
As of late, as I stated, the problem is more persistent now.
What do you think? An issue with the latest updates of 10.6.5?

I too often have a devil of a time connecting to a Linksys WiFi router with a brand-new unibody MacBook Pro 15", 2.66GHz. I noticed that if I boot the machine off an external Firewire drive this seems to be more of an issue than if I boot off the internal drive.
I beginning to thing there's some kind of interference between the Firewire system and the WiFi system.
The router is a Linksys with the latest firmware update. My MacBook and iPhone 3G, iPhone 4 connect to the router fine.

Publising Issues with updated pages

Similar Messages

Maybe you are looking for