Puchasing for specific Project

Hi,
We have our regular Product say X.Now our R & D Department developing new Product say Y,Z,whose production is also along with regular production of X.
We have requirement that I should know cost of Purchase Order raise for Product Y AND Z.For that presently we are creating Purchase order by cost center due to which we can Good Receipt PO to Particular store location.
Is there any way so that I can create PO by cost center and I can good receipt it to Store?

Hi,
project account assignment can only ditinguish your project stock with others. But PO with account assignment, do not keep stock in stores but consume immediately to the project.
Either you do not use project in buying and buy in specific storage location. Manage there issue to project when need to be consumed.
Sanjeev

Similar Messages

Set different System Prefs for specific projects?

What I need to be able to do is to maintain everything about a client project in one place. We use a different drive for each client, that way everything is kept very orderly and we can easily manage it.
But if I set the system prefs (like where to save render files, capture scratch, etc.) for one project, those settings are saved even when another project is opened and I have to remember to change them or I'll get render files from Client A saved to Client B's drive.
And of course the problem is even worse with multiple projects open.
So, is there any way to say: Save Everything about this project HERE and Everything about this other project over HERE? And not have to manually change system prefs every single time?
Thanks!
G5 Dual 2.0 Mac OS X (10.4.9)

I simply created three different users for three diffrent projects when specifically requested to meet such odd and onerous and unnecessary (in my view) requirements. That way each project could be assigned its own preferences for such things as targets for scratch etc. I find the FCP file management system more than adequate to quickly keep crucial original files in order without resorting to the log in/out user dance, but its the only thing I could come up with at the time. Maybe someone else has an easy cure.
G4 Powermac Dual Mac OS X (10.4.9) 1G RAM,200GB scratch int, FCPS, LaCie Ext FW DL DVDburner

Harvesting Projects Providing Access to Users for specific projects OER

Hello Everyone,
I am working on OER. I have to implement some requirements as follows:-
1. When I am harvesting the project, all the files of that project are harvested in the OER. I want to harvest in a Specific Project that I have created earlier in OER or with the same Project name that I am harvesting. Is it possible???
2. Suppose I have created a user named Arpit which is assigned User role in OER console. User role is provided access to view,edit,create Project. So Arpit can be able to view,edit,create all the projects in OER. But my requirement is that I want to provide access only to a specific project which are assigned to Arpit. Is it possible in OER?
Please provide any suggestions on above points.

Can you access the PDP section under the server settings and try to open the PDPs (choose the ones associated with the EPTs of the projects)? Is it successful?
Then edit and save them without changing anything to see if it helps.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Can you turn Faces off for specific Projects?

I do photography just for myself normally, and for my pictures I like to use Faces. However, I've also done some photography for groups. I don't want Faces to try and tag these people, because I don't even know them! Is there a way to turn Faces off for certain projects, but not turn it off totally?

I have a similer thing since I use aperture for my work and for personal things. I use seperate libraries. Create a seperate library from the file menue. (File->switch library->other/new) make one for work (no faces) and one for personal (faces enabled) It's not as simple as setting it on or off for each project but it does work for me.

Drawings for a specific project

Hello PS Gurus
please advise to look up all drawings for a specific project.
we are looking for a way to look up drawings not related to looking up by change numbers.
an you please advise a method and transaction for this.
Thanks & regards
PY

Hi,
We have two option on attaching the document to WBS element.
1. CV01N create a document and attach a file, in the object links assign the respective WBS element. On executing the CV04N with the WBS element, you will be able to find the list of available documents.
2. Through services of Objects, but if you attach it here you cannot obtain the attachment by any direct transaction or table. You need to built a customer functionality to identify it. Please find below thread for more information
http://scn.sap.com/thread/1535698
Regards
Terence

Transfer of O/H accounted for In GL to a specific project

Would like help on how O/H example electricity accounted for in a natural account in GL be allocated (absorbed) on a predefined criteria to a specific project as an over head componet to determine the project actual profitability
thanks, would appriciate you help
Roger

The items that are in the GL do not have a path back to Projects.
However we always handled the O/H by applying an O/H rate to each project based on labor. If you used an indirect profit center you could allocate based on each direct profit centers labor costs.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Roger Perera([email protected]):
Would like help on how O/H example electricity accounted for in a natural account in GL be allocated (absorbed) on a predefined criteria to a specific project as an over head componet to determine the project actual profitability
thanks, would appriciate you help
Roger<HR></BLOCKQUOTE>
null

Vacation rule - Timesheet approval for a specific project

Problem Description: Would like to know how to set the vacation rule for a specific project.
My requirement is to create vacation rule for a timesheet approval for a specific project. I do see option in vacation rules but there is no option to select specific project.
Can you please help me out on this?
======================================================
Transfer notification ownership
A manager may transfer a notification for a specific project to the new manager of that project.
Regards
Umeshwar Thakur
91-9766616912

Hi Dina, thx for your response
I have error "Rejection Error : Auto Accouting Error"
There is Output :
Project Num Revenue(Credited) Customer Agreement Rejection Reason
DP700150.01 1 NOKIA SI( 1058) PKS-01/NSN/09 AutoAccounting Error

Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.

Logic 10.1 for a specific project; there is no mixer and the display is completely erratic. For other projects it's working for now. Please help

Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test.

How to restore Project from repository for specific date ?

Hello,
I have Web Dyn Pro Project. Some files were deleted in project and were checked in to repository.
Could you please describe easy steps how to restore project state for specific date ?

The only way you could do that was if you used Time Machine on the computer to make backups. You could simply store the mobile backups folder on the day you wanted and then restore the iPhone.
I've done this successfully in the past.

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Unable To Load Specific Project

Dear all,
I seriously need help here. I've been working on a project for a few weeks and just a day ago while i was halfway working on it, iMovie'09 exited unexpectedly. When i relaunch, i've been having problem loading this specific project. It kept having the spinning icon on the preview window and stays that way forever.
I have no problem loading other projects. What could've happened?? I can't afford to redo the entire project as it is a real pain to do so! I could remember the last thing i did before iMovie'09 exited was copying & pasting some text from the web to that project i was working on. And suddenly this happened.
I've tried reinstalling iMovie, deleting project folder, disabling fonts, etc but to no success.
Any help would be much appreciated!
Thank you.

Has anyone had any luck repairing, rebuilding or recovering a damaged project? I think I'm suffering the same thing. In my case, the project loads into the project window so I can see the clips, transitions and such, but it will not play. So close, and yet so far.
I've been searching this forum for answers. There are a lot of reports of projects that suddenly "die" but it seems that every thread ends with a question mark and no solution.
If there's no way to fix a broken project, this is a very serious flaw that everyone should consider before devoting days of effort to an iMovie project. Of course backups will save some effort but let's face it, most programs don't routinely produce damaged files. This needs to be fixed or users need to warned up front of the possibility of losing hours of work.

How to apply Software Restriction policy for specific user in local group policy object ?

I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject API

I achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How Do I Use a SINGLE Custom CSS for My Project?

How do I set a single CSS for a project?
Currently, I have linked (I checked, they are actually linked) FM files. The project is Responsive HTML 5 Single Source Layout. It is set up this way:
Project Files
Each FM file has a folder that contains a CSS, an FPJ, any baggage (PNG, for example) and an HTM.
So, for my project, I have 31 such folders.
Above them is RHStyleMapping.css.
That's it
To map my project to a custom CSS, I did this:
1) Created the custom CSS (let's call it TheSingleCSS-sb01.css) and put it in the same location as RHStyleMapping.css.
2) Right-clicked Responsive HTML5 (Primary Layout) in the Single Source Layouts pane.
3) Selected Properties. The Responsive HTML5 Properties dialog box opens.
4) Click Content, select the Apply to all Topics check box, select CSS, and choose my CSS, TheSingleCSS-sb01.css.
5) Click Save and Generate. Generating happens.
6) When prompted, click View Result.
7) Double-click one of the resulting topics, and choose the HTML tab.
8) Notice the following CSS files are referenced, NOT the one I want:
<link rel="stylesheet" href="Configuration_ChangeWorkflow.css" type="text/css" />
<link rel="stylesheet" href="..\..\RHStyleMapping.css" type="text/css" />
<image>
So:
1) How can I replace 32 individual CSSes with one single custom CSS?
2) Also note that Project Manager does not display my custom CSS, even though it is in the same location as RHStyleMapping.css and referenced in the Properties dialog box.
Thanks all,
Sean

Hi, so as I mentioned before, I have used Apply to all and this doesn't work. The resulting HTML still uses a specific CSS for that one HTML file.
1) I put the CSS I want to use, Sean01.css, in the top level of my project using Windows Explorer.
2) I Save and Generate.
3) But, my settings for styles in the CSS are not used. For example, FM_GlossaryDefinition is defined with a 0 left indent but actually uses a 144pt indent (that mirrors the print FM document and that I do not want).
4) And, you can see from the actual HTML, that the Sean01.css file that I applied to all topics (see the first image) is not referenced. What am I doing wrong?
What am I doing wrong? Again, these are imported FM files; this is not linked.
Thanks,
Sean

Authorization for specific business scenario or business step in solar01

Dear all,
we have an issue regarding solution manager blueprinting management restricting an access to specific nodes. Our goar is to have several substructures devided by modules like: FI, SD, PS and etc. And each team member according his position in a company should have an access only to his substructure and all the related documentation below that. Saying an access means a change mode not a display access.
Please find the steps have been performed during the configuration of project below:
All the configuration around system landscape has been done properly.
A new project for solution was created in solar_project_admin.
A correct logical componens has been assigned.
All the required users have assigned as a team members of a project.
At the projec. team member tab a box has been checked in for: restrict changes to nodes in project to assigned team members.
A proposed structure of nodes has been created within Tx solar02.
The right team members have assigned to specific node. So that only they suppose to have a change permission within that nodes. All others read only access.
Every user has sap_solar01_all role assigned to him. We have tryed assigning varios roles according to http://help.sap.com/saphelp_sm310/helpdata/en/db/a1033b2a98f46ae10000000a11402f/content.htm
However as a result we are having a change permission allowed for every node within the structure. Like FI responsible member can access to any node from a tree. And he can make a change for SD related documentation.
Please assist regarding this issue.
Kind regards,
P.S.
I found a thread with a similar problem which was solved by activating a checkbox which is already activated in our system and actually doesn't solve that problem for us.
Authorization for specific business scenarios in Solar01/02
Edited by: Artjoms Nikulins on Mar 11, 2010 3:37 PM

Hi
As far my knowldege goes this is not possible to do within same project or making the same.
You can have project specific access given to member but you cannot go module wise authorization.
Ofcourse there satellite system authorization will be different but not in solman.
In addition check this security guide
https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000075728&_OBJECT=011000358700007187872005E
Hope it ans ur query.
Regards
Prakhar
Edited by: Prakhar Saxena on Mar 12, 2010 3:22 AM

Puchasing for specific Project

Similar Messages

Maybe you are looking for