Puedo conectar mi iphone al disco duro conectado al airport extreme?

como puedo conectar mi iphone y mi ipad al disco duro que tengo conectado en la base airport extreme?

Hola tengo la misma inquietud, ya sabes como hacerlo?

Similar Messages

Mi mac book pro no reconoce mi disco duro conectado internamente pero si lo conecto via usb todo va muy bien que puedo hacer?

mi mac book pro no reconoce mi disco duro conectado internamente pero si lo conecto via usb todo va muy bien que puedo hacer?

I think you may have a different problem than tonox.
You say that your Macbook Pro recognizes a Toshiba drive.
Your Macbook does not recognize a Hitachi drive, Samsung drive and a Kingston SDD.
Are these drives connected externally?
Can you see these drives in Disk Utility?
Have you tested the drives on other computers?
Have you tested the drives on all USB connections?
Have you tested them with different connection cables?
Ciao.

Puedo conectar mi iPhone 5 , con el airtv compartiendo internet del mismo dispositivo?

Puedo conectar mi iPhone 5 , con el airtv compartiendo internet del mismo dispositivo?

Puedo conectar mi iPhone 5 , con el airtv compartiendo internet del mismo dispositivo?

HT4811 como puedo recuperar el espacio de disco duro que me tomo el FileVault2 en 10.8.5?

Encripté mi computadora nueva con FileVault 2 en mi MacBook Pro 10.8.5 (Mountain Lion) con 500GB de disco duro y ahora resulta que solo me quedan 1.53 GB libres cuando antes tenia como 340 GB libres. ¿Cómo puedo recuperar el epacio libre?. Aclaro que aún no he reiniciado la computadora después de haber encriptado la información y ahora estoy desencriptando para ver si se recupera el espacio después de reiniciar. ¿Qué me aconsejan hacer?. Gracias

problema resuelto: desencripté y reinicié, el espacio libre bloqueado regreso.

No puedo trasladar un archivo a disco duro o pendrive, ¿por qué?

Necsito copiar archivos a pendrive o mi disco duro, pero no puedo. Al cambiar a Mountain Lion es imposible hacerlo, necesito ayuda urgente!!!
Gracias.

Bienvenido/a
OS X no es capaz de copiar archivos a una unidad que emplea NTFS como sistema de archivos por licencias. Necesitas una app como Paragon NTFS, o usa exFAT, que soporta Windows y OS X y no necesita una aplicación

IPhone no longer connects to my AirPort Extreme wifi

So I looked around...
I waited for ios6 for a potential fix on this...
I still can't connect to my home Wifi from my iphone4
Set up:
AIrport extreme as main router
Extended with an airport express
What have I tried...
Well starting with the easiest
Restored the phone from factory
Reset network
Forget network, start again
Airplane mode
Extreme settings
Turned off security, still nothing
Changed the channels from automatic to manual
Turned on 5ghz
From wap 2 personnel to other
Turned off the express
Tried various combinations of network type, n, g etc...
I am out of ideas....
It the house we have a Mac Pro, a pc, 2 iPads, and an iPhone 4S. All are good
Just that iPhone 4. Started 3 weeks ago
ARGH!!!!!!!!!

not much response in here which surprises me...
Anyway... AS I am still looking for answers, I will share a couple of points that I realised...
in Airport Utility, I noticed that my iphone MAC address was actually showing as client connected, despite my phone network showing the spinning wheel next to the network name for ever and never actually connecting.
I am currently testing the router mode in Network to be on DHCP and NAT mode with a range from .2 to .200
My phone is now connected....
Everything seems to be ok and happy so far...
strange that this router and phone have worked together for at least a couple of years, the phone works everywhere else, and all other toys connect to my WIFI just fine. the list is as follow:
airport extreme
Zeppelin air
2x apple tv
2 ipads
iphone 4s
2 mac
1 pc
I have litterally just hard reset the router with a pin just now as a last resort... same...
I will leave the router as DHCP & NAT until a potential firmware or OS update...

IPhone 5 won't connect to Airport Extreme (1st gen) at end of extended network

See the attached image below for my network setup... The Time Capsule is a 4th gen unit, the Airport Express (Mudroom) is a 2nd gen - both of which are dual band devices (5GHz *and* 2.4GHz at the same time). The Airport Extreme (Workshop) is a 1st gen unit that only supports one band at a time (5Ghz *or* 2.4Ghz, but not at the same time). Don't know if it matters, but the other Airport Express (Living Room Speakers) is a 1st gen "N" unit, again, either 5GHz *or* 2.4GHz at a time.
The Workshop and Mudroom devices are about 100-120' apart, and have a decent connection between the two (I have both units sitting in windows so there is minimal obstruction on a line-of-sight between them).
When I go out to the workshop, my iPhone 5 will not switch over to the device in the shop - it tries to stay connected to the unit in the mudroom, which of course has a weak signal because my iPhone is now inside a metal building.
I've searched online (here and google) to see if perhaps this has something to do with the dual band vs. single band nature of the devices, but haven't come up with anything definitive.
Any ideas? Do I need to get a newer Express to put out in the workshop that supports dual band?
Thanks...

The graphic is fooling you. The Workshop AirPort will not extend the signal unless there is a dotted line directly from the TIme Capsule to the Workshop AirPort. You cannot have another AirPort in "between' the Time Capsule and Workshop AirPort if you want the Workshop AirPort to provide any additional wireless coverage.
For more details, see this Apple Support document note.
If you have a Mac laptop handy, we can do another test to prove that the Workshop AirPort is not extending the signal at all. It is "joining" the network....and it provides no additional wireless coverage that way.
If you want the Workshop AirPort to "extend" there must be a dotted line directly from the Time Capsule to the Workshop AirPort. No other Airports can come "between" the Time Capsule and Workshop AirPort.

My iPhone 4s will not recognize my Airport Extreme network

I just purchased the AirPort Extreme. I have come home and set it up. My iPads connect quickly and easily... but my iPhone 3 and 4s do not even see the network? They did and then it went away? Why?

t connects to wifi and 3g no problem.
If it connects to 3G, it's connected to the phone network. 3G carries both voice and data. Your phone can't show BOTH 3G and No Service at the same time.

Can my iPhone print to printers connected via Airport Extreme?

Hey forum,
So I know this thread has been brought up more than a few times, but I feel like either new information could have been found or Apple has initatied some sort of change to allow it. The basic scenario is that in two households (one my own, the other a relative) housing a Time Capsule and Airport Extreme Base Station, each with a printer connected via USB. Things work perfectly on my iMac, MBP, and Windows machines but my iPhone won't print because of the Airprint shenanigans that I don't understand. Essentially, can I print from my iPhone now without any hacks or third party apps?
Thanks!
Ethan
Used products include: iPhone 3Gs (iOS 5.0.1), iPhone 4 (iOS 5.0.1), MacBook Pro 2.16 Core 2 (Mac OS X 10.7.2), iMac (Mac OS X 10.7.2)

Air print is for Air print enabled printers only.
There are some wifi printers that have there own app that allow you to print to them, but onlt limited apps will be supported by this.

Horrible Iphone wi-fi connection to my airport extreme and express... ugh!

Hello everyone..
SO. Over the weekend I upgraded my home network to an Airport Extreme (which is in my den) and added an Airport Express in my living room, which is about 20 feet away, line of site, no obstructions.
I used the utility to configure the network, didn't do anything creative, just setup a WPA password, added the airport express and extended the network. Everything works beautifully! My MacBook Pro shows full signal strength through my entire condo.
The only hang-up is with my iphone 3g!!! I can connect to my network and iTunes but I have to be within three feet of my Airport Extreme, if I walk 10 feet away i loose signal completely. Even in the living room, standing next to my airport express it doesn't pick up the signal and my MBP does.
The only reason why I went and bought all this new wireless equipment was so I could use the free remote app on my iphone to control and play iTunes through the airport express.
ANY suggestions? Voodoo or spells I can cast? This is really frustrating me... I'm close to returned everything and going back to my Linksys router (which my iphone connected to with no problems)
Justin

thanks... I have reset everything in my condo that can be reset, including the microwave.
It's a little more bizarre, if I unplug either the airport extreme, or the express it will work fine and I can connect and stay connected with my Iphone. I only have issues once I create an extended WDS using the airport express

Iphone 3g will not connect to airport extreme

I bought airport extreme today and hoping to use it with my iphone 3g. iphone reverts to 3g and will not stay "connected" to wifi. any ideas?

But it is not set up as a DHCP server. It is in bridge mode.
Ah, well, that could be it. Many (not all) ASDL providers only provide a single
IP address.
I was thinking yours offered more than one when you said:
The airport works fine with the MacBook and I have a ext. hard drive and a printer working.
I leaped to the conclusion that the hard drive and printer were connected via cat 5, (which would require that they get an IP as well), but now I see that was probably a wrong assumption.
So with bridge mode, if your ISP only offers one IP, or they only allow "registered mac addresses" you can only get the laptop running. DHCP (and NAT network address translation) will get around the single IP problem.
Registered Mac Addresses means they asked you the mac address of your laptop and that is the only one they will honor. If you don't remember that happening, chances are its not an issue, but if it is, most routers have a "clone Mac Address" option.

HT2497 iPhone 5 will not connect to airport extreme

Brand new iPhone 5 from Verizon, error message " "network cannot be set up by this software. Go to apple.com/support/airport

Are you trying to set up the AirPort Extreme from scratch....or....is is already set up and you are trying to connect the iPhone to the wireless network that the AirPort Extreme is producing?
What model of the AirPort Extreme do you have?
If you are not sure, look on the bottom of the device. The model number starts with an "A" followed by four numbers, as in Axxxx.

Iphone 4 won't connect with airport extreme 5th generation

Just bought a brand new AP extreme, and the computer links up fine, but iphones repeatedly time out.
Any ideas?
Running Lion, and iOS 5
Thanks in advance.

Ditto here too. I was helping a friend update her AP Extreme today. Reset the modem. Reset the AP Extreme. iMac links wirelessly with the AP Extreme and gets to the Internet - no problem. However, not one iPhone in the house (3 of them - one iPhone 4 and two iPhone 3s) will access the interest with the AP Extreme.
Each of the 3 iPhones recognized the AP Extreme and one of them (a 3 without updated software on it) will actually show that there is a connection to the AP Extreme. Two of the iPhones (4 and 3 (both of which have latest updates) work perfectly everywhere else we've been (FL, NC, Germany) in the last few weeks. They also work perfectly on the two AP Extremes in our house.
I've read a bunch of support and this seems to be a recurring problem for which there does not appear to be a good solution. Is there anything more current in guidance that might help????
Thanks also in advance.

My iPhone is not connecting to my Airport Extreme

My iPhone and my families iPhones can no longer connect to the wifi. It was working fine. My iPad, Apple TV and Laptops all work fine.

Hi - This worked for me - go to settings - choose Wi-Fi - press the arrow next to the network that you want to connect - choose "Forget This Network" - choose "Forget" - then press Settings and turn off the iPhone - turn it back on and wait it for it to reboot - then go to settings - choose Wi-Fi - press the Name of the network - enter the password and press "Join" - you should now be connected - let me know how you make out.
Charlie

Disco duro en ipad

puedo conectar algun tipo de disco duro al ipad?

Directamente no. Con in wireless disco si.
El producto es Seagate wireless hard drive para iPad

Puedo conectar mi iphone al disco duro conectado al airport extreme?

Similar Messages

Maybe you are looking for