Puis je generer 2 sinus retardees en continu avec la ni 6052e

J'utilise un carte ni 6052e
voie 1 sin(x)
voie 2 sin(x+t)
Les deux voies sont generees en continu sans trou
Si la carte peut generer ces signaux
existe t'il un vi
pouvez vous me le transmettre
Merci

Bonjour,
Cette carte peut generer deux signaux analogiques simultanement.
Tu dois d'abord creer les tableaux de points representant les sinus puis les entrelacer (1er point signal 1, 1er point signal 2, 2e point signal 1, ...). Les signaux doivent avoir le meme nombre de points.
Pour generer les signaux, tu peux choisir dans la palette le vi AO Generate Waveforms en utilisant les voies analogiques 0 et 1.

Similar Messages

  • Envoi de signal analogique continu avec Labview

    Bonjour,
    Je voudrais savoir comment envoyer un signal analogique continue avec le DAQ assistant de Labview.
    En effet je possède une carte d'acquisiton NI 6008 et lorsque je veux envoyer un message analogique de 5V en tension ( ce qui est normalement possible avec ma carte ) il me met un message d'erreur. Je ne peux que envoyer un échantillon sur commande...
    Merci d'avance pour la réponse.
    Cordialement.

    What error message do you get??
    Plus, I suggest you to use appropriate example VI's shipped with LabVIEW for Analog generation.
    You will find it at Find Examples>>Hardware input output>> DAQmx>> Analog generation>> Voltage>> i suggest 'Generate Multiple Volt Updates-Int clock.vi,  to start with

  • Can i generate two sinus to delay in phase in continue with the ni 6052E PCI

    I want use the daq ni 6052 E in sinus generator
    Channel 1 sin(x)
    Channel 2 sin(x+pi/4)
    continus generation without hole
    How must I do
    do it exist a VI
    can you send me
    Thank you

    Greetings,
    Below is a link to a LabVIEW example that should accomplish the task you have described:
    Generating Sine Waves Continuously on Two Analog Output Channels
    Good luck with your application.
    Spencer S.

  • No more software updates for iPod touch 1st generation?

    I have been attempting desperately to update the software on my first generation iPod touch, but iTunes continues to tell me that the 2.2.1 software is the most up to date version. I know this cannot be true considering the iPhone 4 software is currently be offered as a free update.
    Without any further updates, I can no longer use many of my favorite apps. Is there some fix I can try to get my iTunes to update my software?

    You can buy the update to os 3 here:
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage

  • IPod Touch 2nd generation - no upgrade possible?

    I bought my iPod Touch Model MC086NF on 01/04/2010. It now appears it was of the "first" 2nd generation, i.e. without the 3rd generation software.
    "Following the introduction of the 3rd generation iPod Touch, Apple also continued offering the 2nd generation 8 GB version, upgraded to the same iPhone OS version as the new 3rd generation devices. The iPod Touch (3rd generation) is model A1318. Apple as well sold many refurbished iPod Touch 2nd generation models with the 3rd generation software effectively making them a 3rd generation unit. These can be identified by software version 4.3.5."
    My version is 4.2.1 and it took me quite a while to find out why I couldn't upgrade to iOS 5. I'm furious about this as it appears I'm stuck with a device that cannot be upgraded anymore. Apple doesn't mention this anywhere of course (I found the detailed data on Wikipedia). The shop didn't mention anything about this of course.
    Does anyone know about a "fix" for this?
    Thanks a lot in advance.
    Paule

    There is nothing to fix.
    The 2nd gen ipod can only support 4.2.1.
    What does Apple "not mention"?
    The different models are described here:
    Identifying iPod models
    The compatible devices are shown here:
    http://www.apple.com/ios/features.html

  • Affichage par défaut : 2 pages en continu

    Bonjour à tous,
    Chaque fois que j'ouvre un nouveau PDF, il s'affiche en mode pleine largeur avec un zoom supérieur à 100%.
    Je ne comprends pas du tout car dans le menu Préféfences / Affichage j'ai pourtant sélectionné  "Deux pages en continu" avec "Zoom automatique" comme affichage par défaut...
    Qqun peut-il m'aider à comprendre SVP ?
    Merci

    Bonjour ,
    j'ai un peu le même problème que vous mais un peu différent :
    http://forums.adobe.com/thread/1379204http://
    essayez de passez , dans Préférences , par :
    Accessibilité : Ecraser l'affichage .....là vous avez les mêmes options que dans Affichage par défaut sauf pour le zoom où il n'y a pas Automatique . Après il faut tester .....pensez à fermer le PDF et le réouvrir .
    A savoir aussi que certains PDF sont réglé comme tel par l'auteur et qu'on ne peut rien y faire ...ça c'est pas cool !
    perso en mettant une page en continu + plene largeur j'ai des PDF qui a la base sont en double page la fenêtre se réduit ( large 15 cm par exemple ) et le pire c'est qu'elle provoque sa forme aux autres pdf autour ( qui eux font à 25 ou 30 cm de large par exemple ) .
    ça serait sympa de votre part de faire un retour par rapport à votre question....mais aussi de me dire si chez vous aussi ça fait comme pour moi dans le lien plus haut ( il faut avoir plusierus dossier avec plusierus PDF dedans pour contater le bug ) . merci

  • High CPU Usage in Word 2013

    Hi everyone,
    I'm having an issue with Word 2013 and I'm hoping someone can help. Seen as I got fleeced for my TechNet subscription this year (the price given on the invoice doubled when I called up to pay!) I’d very much like to see a speedy fix from the Microsofties
    please! :D
    Recently, I've found that Word will consistently exhibit high CPU utilisation, ~50% on a dual core second generation Core i5.
    This continues, even when I’m not providing any input to or interacting with the Word window and even when the Word window is covered by other windows. Minimising Word causes its CPU usage to drop back down to zero.
    The strange thing is that, so far, I’ve only observed this with a single document. I started writing this document at the start of this week and it’s been authored exclusively on Word 2013. In fact I’m the only one who’s editing it and I’ve only used a single
    computer (and this one single install of Word 2013) to do so…
    There’s nothing particularly unusual about this document, and a different but similar document which uses the same themes and features (in fact the theme for the second document was created from the first one) doesn’t appear to cause the same issues. Both
    these documents are stored on SkyDrive, and are being edited directly from there.
    Initially I tried the much recommended tweaks of disabling hardware graphics acceleration and sub-pixel positioning, however neither of these has had any effect.
    I investigated a bit further using Sysinternals Process Monitor, and found that while Word is using a lot of CPU it’s actually looping very, very quickly polling for the existence of the registry key “HKCU\Software\Microsoft\Avalon.Graphics”.
    This key doesn’t exist on my system, and a quick test I conducted where I created it just lead to Word looping polling for more non-existent registry keys.
    My system is a HP Folio 13 running Windows 8 Pro x64 with Office 2013 (RTM, not Beta) 32 bit. Both Windows and Office are fully patched, as is everything else on the system.
    Thanks in advance for any help anyone can offer.
    Chris

    Hello again,
    After working on my problematic document some more, I believe I’ve found the cause of the issue.
    @Microsofties – I think this one is either a bug or a dodgy OOTB template…
    I noticed that the high CPU usage only seemed to occur when the document’s footer was displayed. Experimenting with some careful scrolling and zooming to hide footer (without actually using the “hide white-space” option) seemed to confirm this so I investigated
    the footer a bit more.
    My document was using the standard Word “Facet (Odd Page)” footer template with a couple of fields added to suit my needs, namely “Publish Date” and a page number.
    The template seems to be structured such that the content of the footer is inside two nested text boxes (one inside the other). I also noticed previously that this footer template also appears to “jump” up each page and back down again as I scrolled.
    So I deleted the footer and its text boxes, and recreated the same content, in the same position (using the standard paragraph alignment tools) by hand without the nested text boxes. This has, so far, fixed the issue!
    I also noticed that the CPU usage dropped right down to idle the moment I deleted the nested text boxes.
    Altogether, this leads me to conclude that the “Facet (Odd Page)” footer template in Word 2013 is the source of my issue. Specifically, I believe that the use of nested text boxes in this template causes Word’s interactions with the .Net 4.5 WPF to go a
    bit nuts, as evidenced by the infinite loop of request for the non-existent “Avalon.Graphics” WPF registry key I mentioned previously.
    It would be nice to see some feedback on this one, Microsoft people, if only to know if this is actually a general issue or is specific to my document!
    Thanks, Chris

  • What happened to the 3-D visualization of tasks in Project 2013?

    I just got Project Pro 2013 loaded on my machine.  I was surprised to see all of my tasks on my Gantt with constant colors as opposed to 3-D.  I can't seem to find the switch setting "Show bars and shapes in Gantt Views in 3-D" that
    used to be under File=>Options=>Advanced=>Display.  Has this feature been removed for 2013?

    Hi Chris,
    Unfortunately, all Office 2013 products removed the 3D visualisation since it is not fashionable anymore. All is square and sober now.. I think we have to get used to it since the next generations of Office will probably continue that way.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Inconsistency Found in segment E101CI_EEW_CUSTOMER_H.

    Hi Experts,
    We have a IDOC in development system CRM 4.0 created by BDFG, in that IDOC in the segment 'E101CRMXIF_CUSTOMER_H'  there is a CHILD segment Z101CI_EEW_CUSTOMER_H with Z fields. it is generating/regenerating without any Inconsistency.
    We have those fields in the Structure "CRMXIF_BUSTRANS" in "CRMXIF_CUSTOMER_H" i CRM 4.0 & as well as in CRM 7.0. These fields are nadded using EEWB.
    The system upgraded to CRM 7.0 & the idoc is moved from CRM 4.0 to CRM 7.0, When we regenerate this IDOC in CRM 7.0 with new fields for some other segment it give me this message:
    Inconsistency Found in segment:
    Segment       E101CI_EEW_CUSTOMER_H
    Structure       CI_EEW_CUSTOMER_H
    "Ignore Inconsistency & continue(SAP Note 573251)"
    "Remove Inconsistency & continue(SAP Note 568874)"
    "Cancel Generation"
    I opted "Ignore Inconsistency & continue(SAP Note 573251)",
    We saw that the segment 'Z101CI_EEW_CUSTOMER_H' was not generated in CRM 7.0 as it did in CRM 4.0 but a new segment generated 'E101CI_EEW_CUSTOMER_H'  with 2 fields which don't even exists in "CRMXIF_BUSTRANS".
    If i opted the second option it gives me this message:
    Name Range Violation: Name E101CI_EEW_CUSTOMER_H not permitted in customer system.
    Project will go live next month & we are stuck in Data migration issue due to this IDOC error.
    Waiting for a quick response.
    Thanks,
    D_marco.
    Edited by: d_marco on Mar 23, 2011 7:37 PM

    Hi,
    While doing PGR at VL32N, we are facing this error. Can someone assist.
    Regards,
    Aruna

  • SQLLDR: "second enclosure string not present" error in a complex datafile

    Hello,
    We are in 11g.
    I have a strange issue when I load data. I cannot figure out why sqlldr reacts in this way :
    Here is the table definition:
    create table IMPORT_SFEE_TRACKER_GENERIC
    PROJET_CODE VARCHAR2(50),
    TRACKER_ID VARCHAR2(50),
    TRACKER_TYPE VARCHAR2(50),
    ARTIFACT_ID VARCHAR2(50),
    TITRE VARCHAR2(200),
    DESCRIPTION CLOB,
    SUBMITTED_BY VARCHAR2(100),
    SUBMISSION_DATE DATE,
    LAST_MODIFIED_DATE DATE,
    CLOSED_DATE DATE,
    TYPE_DEMANDE VARCHAR2(200),
    STATUS VARCHAR2(50),
    CATEGORY VARCHAR2(100),
    PRIORITY VARCHAR2(100),
    ASSIGNED_TO VARCHAR2(200),
    TEXT_01 VARCHAR2(2000),
    TEXT_02 VARCHAR2(2000),
    TEXT_03 VARCHAR2(2000),
    TEXT_04 VARCHAR2(2000),
    TEXT_05 VARCHAR2(2000),
    TEXT_06 VARCHAR2(2000),
    TEXT_07 VARCHAR2(2000),
    TEXT_08 VARCHAR2(2000),
    TEXT_09 VARCHAR2(2000),
    TEXT_10 VARCHAR2(2000),
    TEXT_11 VARCHAR2(2000),
    TEXT_12 VARCHAR2(2000),
    TEXT_13 VARCHAR2(2000),
    TEXT_14 VARCHAR2(2000),
    TEXT_15 VARCHAR2(2000),
    TEXT_16 VARCHAR2(2000),
    TEXT_17 VARCHAR2(2000)
    Here is the CTL:
    LOAD DATA
    CHARACTERSET WE8ISO8859P1
    TRUNCATE
    CONTINUEIF LAST != ";"
    INTO TABLE IMPORT_SFEE_TRACKER_GENERIC
    -- Pour eliminer la ligne d'en-tete
    WHEN TRACKER_ID != 'tracker id'
    FIELDS TERMINATED BY ';' OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS
    ( PROJET_CODE CONSTANT '!PROJET_CODE!'
    , TRACKER_ID CHAR
    , TRACKER_TYPE CHAR
    , ARTIFACT_ID CHAR
    , TITRE CHAR
    , DESCRIPTION CHAR(49000)
    , SUBMITTED_BY CHAR
    , SUBMISSION_DATE DATE "DD/MM/YYYY HH24:MI"
    , LAST_MODIFIED_DATE DATE "DD/MM/YYYY HH24:MI"
    , CLOSED_DATE DATE "DD/MM/YYYY HH24:MI"
    , TYPE_DEMANDE CHAR
    , STATUS CHAR
    , CATEGORY CHAR
    , PRIORITY CHAR
    , ASSIGNED_TO CHAR
    , TEXT_01 CHAR(2000)
    , TEXT_02 CHAR(2000)
    , TEXT_03 CHAR(2000)
    , TEXT_04 CHAR(2000)
    , TEXT_05 CHAR(2000)
    , TEXT_06 CHAR(2000)
    , TEXT_07 CHAR(2000)
    , TEXT_08 CHAR(2000)
    , TEXT_09 CHAR(2000)
    , TEXT_10 CHAR(2000)
    , TEXT_11 CHAR(2000)
    , TEXT_12 CHAR(2000)
    , TEXT_13 CHAR(2000)
    , TEXT_14 CHAR(2000)
    , TEXT_15 CHAR(2000)
    , TEXT_16 CHAR(2000)
    _Here is a simplified datafile_: (record 2 "artf402772" fails, the 4 other records succeed) (up to "End of datafile"):
    tracker id;tracker type;artifact id;title;description;submitted by;submission date;last modified date;closed date;request type;status;category;priority;assigned to;Date demande (si saisie différée);Demandeur;Domaine fonctionnel;Gravité;Heure demande (HH:MM) si saisie différée;Nature;Plate-forme;Réf. Dem. Travaux;Réf. FT dossier;Régression;Réponse;Reproductibilité;Responsable FT du dossier;Type demande;Version cible (palier);Version origine;Monitoring Status;
    proj2411;tracker7756;artf402149;demande d'analyse plantage FTT24711;"De : xxx xxx Ext fff ggg SISE
    Envoyé : vendredi 22 août 2008 07:22
    À : ZZZ S
    Cc : HD EXPLOITATION
    Objet : RE: Le traitement FTT24711 du job 370_SAV_AL VTO en erreur sous l'environnement SAV
    Bonjour,
    Le traitement s'est incidenté hier à 23H55 (id oracle 4402376),
    Utilisateur : INTERFACE
    Responsabilité : AZ / TT_TR_CLIENT_FINAL
    PARAMETRE(S) :
    Code interface : 247
    Code SI émetteur : FRONTAL
    Nom du fichier : SAVE_18094130_21082008155854.txt
    SITUATION INITIALE :
    - Phase de validation
    En-têtes rejetés : 219
    Lignes rejetés : 219
    ULs rejetés : 200
    - Phase de traitement API
    En-têtes rejetés : 9
    Lignes rejetés : 9
    ULs rejetés : 5
    - Phase de workflow
    Lignes en attente : 2827
    CHARGEMENT :
    -> Traitement : 4402377 [FTT84424721]
    FTT844 - 24721 - Interface Avis de retour SAV - Programme maître
    Nom du fichier : SAVE_18094130_21082008155854.txt
    Nombre d'enregistrements : 33
    En-têtes chargées : 11
    Lignes chargées : 11
    Lignes ULs chargées : 11
    VALIDATION :
    En-têtes validées : 11
    dont Avertissements : 0
    Lignes validées : 11
    dont Avertissements : 0
    Lignes uls validées : 11
    En-têtes rejetées : 0
    dont En-têtes orphelines : 0
    Lignes rejetés : 0
    dont Lignes orphelines : 0
    Lignes uls rejetés : 0
    dont Lignes uls orphelines: 0
    TRANSFERT :
    Nombre d'enregistrements : 33
    En-têtes : 11
    En-têtes retour réexpédition : 0
    Lignes : 11
    Lignes uls : 11
    Mouvements supprimés : 33
    SOUMISSION API :
    -> Traitement : 4402378 [FTT24740]
    FTT24740 - 247 - Interface entrante Avis de Retour et d¿expédition - Soumission API
    Erreur applicative sur le composant : xxx.check_in_file_name
    Au cours de : CHECK FILE_NAME
    A retourné : Il existe déjà un fichier SAVE_18094130_21082008155854.txt enregistré pour l'interface 247 et le système partenaire FRONTAL.
    Le nom du fichier doit être unique pour une interface et un système partenaire donnés.
    Fichier présent sous tt-oa-db, rep /site/fttcigale/ENTREE/247/ARCH
    -rw-rw-r-- 1 xxx appli 44 Aug 21 16:19 SAVE_18094130_21082008155854.txt
    Cordialement,
    xxx xxx
    03.59.12.64.44 (Choix 3)
    /xx/xx/xx/xx/xx/xx/xx
    [email protected]
    De : HD EXPLOITATION FTT/DSI
    Envoyé : vendredi 22 août 2008 00:18
    À : xxx SISE
    Objet : TR : Le traitement FTT24711 du job 370_SAV_AL VTO en erreur sous l'environnement SAV
    De : Surveillance.de.xxx@xxx-xxx[SMTP:SURVEILLANCE.DE.xxx@xxx-xxx]
    Date d'envoi : vendredi 22 août 2008 00:18:01
    À : HD EXPLOITATION xxx/xxx
    Objet : Le traitement FTT24711 du job 370_SAV_AL VTO en erreur sous l'environnement SAV
    Transféré automatiquement par une règle
    Bonjour,
    Merci de bien vouloir verifier sous vto le job ci dessous
    Environnements : SAV
    Applications : 370_SAV_AL
    Traitements : FTT24711
    Dates de debut : 21-08-2008 23:55:00
    Dates de fin : 22-08-2008 00:08:58
    Durees : 0:13:58
    Machines : ftt-oa-db
    Comptes : fttsg
    Cordialement,
    Equipe Incident
    ";Babacar Sene;22/08/2008 19:23;16/10/2008 18:38;;Exploitant;16-TMA - Clos;SAV;1;Axxx Maes;22/08/2008 00:00;Babacar Sene;1-CIGALE - OM;40-Bloquant;19:21;;Production;;;;;;Babacar Sene;20-Soutien niveau 3;;;
    proj2411;tracker7756;artf402772;Fichier message 10 non reçu par ddd LSA;"-----Message d'origine-----
    De : xxx xxx [mailto:[email protected]] Envoyé : lundi 25 août 2008 16:14 À : ZZZ DDD SI Tx SAV Cc : xx xxx; yyy yyy; zz zzz; uuu bbb Objet : Flux non reçu pour xxx refurbish
    Bonjour,
    Nous avons reçu un camion de xxx à refurbisher ce matin et nous n'avons pas actuellement les flux 10. Merci de nous les envoyer rapidement afin que nous puissions encoder les produits.
    Deux dossiers en exemple : 8323225PqR et 8323280PqR;
    Cordialement.
    Bernard BRIENS
    Tél : 03 56 85 67 55
    GSM : 03 69 42 62 79
    FAX : 03 66 85 51 32
    E-mail : [email protected]
    ";Babacar Sene;25/08/2008 17:47;01/09/2008 14:06;01/09/2008 14:06;;06-SUBU - Clos;SAV;2;Babacar Sene;25/08/2008 00:00;xxxx xxx xxx;1-CIGALE - SAV;40-Bloquant;;;Production;;;;"-----Message d'origine-----
    De : ZZZ xxx SI Tx SAV
    Envoyé : lundi 25 août 2008 17:42
    À : 'xxx xxx'; ZZZ xxx SI Tx SAV
    Cc : xxx xxx; yyy yyy; ccc ccc; lll lll; rrr rrr ccc bbb SIOP; jjj jjj ccc bbb ggg
    Objet : RE: Flux non reçu pour xxx refurbish
    Bonjour,
    Les deux dossiers sont envoyés dans le fichier LRS_4408336.TXT (voir pièce jointe) qui comporte 3010 lignes. Il est parti le 22.08.2008 21:04 Cdt
    Babacar SENE
    /xx/xxx/xxx/xxx/xx/xxx/Projets et Maintenance du SI Supply Management Terminaux tél. +33359126274 [email protected]
    ";;Babacar Sene;10-Soutien niveau 1 ou 2;;;
    proj2411;tracker7756;artf402812;Demande d'analyse FTT880 ;"-----Message d'origine-----
    De : BOSTOEN Audrey OF/DF
    Envoyé : lundi 25 août 2008 11:35
    À : rrr rrr xxx xxx CISE; ccc cccc sss ddd ffff Objet : Alerte sur envoi des stats à vvvv Importance : Haute
    Bonjour,
    Comme vu avec vous par téléphone, Alexis Suard nous remontait le fichier ci-joint que nous devons communiquer à xxxxx tous les lundi avant 12H. Cet envoi n'a pas été fait ce matin, je ne sais pas qui a repris ses dossiers suite à son départ.
    Merci d'avance
    Cdt
    xx xxx
    Orange France / DF / Contrôle de Gestion Coûts commerciaux
    Politique commerciale/Fidélisation
    tél. 03 56 22 11 41
    mob. 03 40 83 00 36
    [email protected]
    ";Babacar Sene;25/08/2008 18:30;15/09/2008 15:18;15/09/2008 15:18;DO ou prestataires externes;06-SUBU - Clos;AMONT;3;Babacar Sene;25/08/2008 00:00;ddd ddd OF/DF;1-CIGALE - OM;20-Mineur;11:35;;Production;;;Oui;"L'automatisation de l'envoi a été mise en prod dans le palier de d'août. le premier traitement devait avoir lieu aujourd'hui, ssauf qu'il n' aas tourné pour cause de mise à stop dans VTO. Activation du traitement effectué par HD, lancement puis soirtie en erreur pour cause de champ date non renseignée dans les paramètres de lancement
    Lancement manuel du traitement puis par SBU, demande au HD de continuer la chaîne. JC ccc s'occupe de la partie VTO";;Babacar Sene;10-Soutien niveau 1 ou 2;;;
    proj2411;tracker7756;artf402818;Demande de modif statut dossiers;"De : fff ggg ggg Tx SAV
    Envoyé : jeudi 24 juillet 2008 12:08
    À : dddd ddd fff DAV; ffff David SCF DAV
    Cc : fffff Serge ddd DPSI SIOP; ssss-COUCOU Lyane ddd DAV; sss Philippe ddd DAV; ffff Thierry ddd DAV
    Objet : RE: Retour F.E..xls
    Bonjour,
    Les 46 dossiers sont passé en statut EXPEDIE, l'annulation de livraison est donc possible.
    Concernant l'explication sur les deux dossiers, c'est Nadine qui a lancé des FTT37510 (réception diverses) avec respectivement les N° de CR 26981 et 26982.
    Cdt
    Babacar SENE
    /ddd/dd/dd/dd/dd/ddd/Projets et Maintenance du SI Supply Management Terminaux
    tél. +33345126274
    [email protected]
    De : DDDD Philippe ccc DAV
    Envoyé : jeudi 10 juillet 2008 11:28
    À : cccc ccc SI Tx SAV; DIALLO Oumar SCF DAV
    Cc : ffff fff SCF DPSI SIOP; hhhhh-hhhh Lyane fff DAV
    Objet : TR: Retour F.E..xls
    Importance : Haute
    Bonjour,
    J’ai mis l’ensemble des statuts pour chaque dossier.
    Il faut mettre le statut « EXPEDIE » pour tous les dossiers ayant le statut « LIVRE ». Le transporteur a bien livré le produit mais il ne l’a pas remis. Par conséquent nous n’avons pas le statut « REMIS » ce qui me parait normal et nous n’avons plus le statut « EXPEDIE ».
    Il faudrait peut-être revoir le contrôle dans l’annulation de livraison sur le statut ou alors ajouter un statut en plus envoyé par le transporteur après le statut « LIVRE » qui pourrait être « NON REMIS ».
    J’aimerai aussi avoir une explication sur deux dossiers qui ont le statut « RECU » mis par un opérateur PO (exemple F05944316, F05988983), comment cela est-il possible ?
    Bien cordialement
    Philippe
    hhh hhh
    hhh/hhh/hh/hh/hh/DAV/hh
    Responsable Qualité Soutien Métier
    tél. +33 (0) 3 51 80 69 21
    mob. +33 (0) 4 95 27 24 78
    ffff.fff@fff-fgggg
    P Pensez ENVIRONNEMENT : n'imprimer que si nécessaire
    De : gggg Oumar hhh DAV
    Envoyé : mardi 8 juillet 2008 17:20
    À : ggg fddd SI Tx SAV
    Cc : ddd ggf SCF DPSI SIOP; SENE Babacar Ext fff fff SISE; gg ggg SCF DAV
    Objet : TR: Retour F.E..xls
    Importance : Haute
    Bonjour,
    Pouvez vous nous modifier le statut ""NON EXPEDIE"" de ces dossiers et les mettre en ""EXPEDIE"" afin que nous puissions les traiter.
    Ce sont des annulations de livraisons.
    Cordialement.
    ggg ffff
    fff/fff/ggg/gg/ggg/DAV/DP2E
    Département Echange Express
    Responsable de la réception
    03 44 80 48 37
    04 78 02 22 14
    [email protected]
    P Pensez ENVIRONNEMENT : n'imprimer que si nécessaire
    De : ddd ddd dd DAV
    Envoyé : mardi 8 juillet 2008 17:04
    À : ddd fff dd DAV
    Cc : fff Cindy fff DAV
    Objet : Retour F.E..xls
    Importance : Haute
    Bonjour,
    ci-joint le tableau des retours F.E concernant les colis sécurisés et les colis non sécurisés.
    Cordialement.
    ddd ffff
    ff/ff/gg/sc/ggg/dav/dp2e
    tél. 03 45 80 48 68
    [email protected]
    ";Babacar Sene;25/08/2008 18:52;01/09/2008 14:13;01/09/2008 14:13;FT;06-SUBU - Clos;SAV;4;Babacar Sene;22/08/2008 00:00;fff gg;1-CIGALE - SAV;20-Mineur;;;Production;;;;Update des tables 027_dossiers et 027_suivis pour enlever le statut LIVRE, puis et mettre le statut EXPEDIE de façon à permettre l'annulation de livraison;;Babacar Sene;10-Soutien niveau 1 ou 2;;;
    proj2411;tracker7756;artf402986;Dde d'analyse sur des statut LIVRE qui remontent sur SAVI sur des dossiers de 2007 déjà fermés;"
    De : fgg Jean ddd ggg SIOP
    Envoyé : lundi 11 août 2008 11:55
    À : dd fff SI Tx SAV; sss ddd SI Tx Aval
    Objet : TR: SAVI - Anomalie BAL Logistique
    Pouvez-vous jeter un oeil,
    Cordialement,
    Jean Lyggg
    ggg/gg/gg/ggg/ggg/DPSI/SIOP
    Coordination développement DPSI
    tél. 03 40 12 61 58
    mob. 04 56 81 80 18
    [email protected]
    De : GGG Christop FFF/SI FFF [mailto:[email protected]]
    Envoyé : lundi 11 août 2008 11:14
    À : fff Serge ff gg hh; sss aaa Ext ddd hhh jjj; hhh Jean fff fff jjj
    Cc : ddd Danielle ddd/ddd; ddd Pascal ddd/DPF
    Objet : TR: dd - Anomalie BAL Logistique
    Bonjour,
    Pouvez vous nous dire pourquoi nous recevons des tracking transport en juillet de commandes datant de novembre 2007 ?
    Exemple de commandes ci -dessous.
    4980643 200 27/11/2007 09:31:49 AMY5615 Eligibilité en saisie
    4980643 200 27/11/2007 09:33:15 AMY5615 Eligibilité en saisie
    4980643 202 27/11/2007 09:36:36 AMY5615 Commande en saisie
    4980643 204 27/11/2007 09:37:05 AMY5615 Commande validée
    4980643 101 28/11/2007 02:18:44 BATCH Commande transmise
    4980643 110 28/11/2007 02:28:30 Dossier bien traité FTT Commande intégrée chez SCF
    4980643 130 28/11/2007 05:08:26 1694453 FTT En-cours de livraison
    4980643 120 28/11/2007 10:35:52 353514496932 FTT Commande en-cours de préparation
    4980643 170 10/12/2007 Code Symptôme : AM6 - Mécanique Combiné : Access. manquant ou abîmé (s FTT Retour panne réparateur
    4980643 170 10/12/2007 N FTT Retour panne réparateur
    4980643 146 21/07/2008 15:08:00 Prés.imp./client absent avisé BATCH Client absent avisé
    4980643 161 08/08/2008 Ret.piloté FTT/command.annulée BATCH (KO) Non échangé
    Merci.
    Cordialement,
    Christophe ffff
    MOE SAVI
    Tel : 03 85 68 60 65
    De : HHHH Pascal FFF/fff [mailto:[email protected]]
    Envoyé : lundi 11 août 2008 09:50
    À : ddd Christop fff/SI CLIENT
    Cc : dddd Danielle ffff/DDSI
    Objet : TR: GGGG - Anomalie BAL Logistique
    Bonjour Christophe,
    Ce pb est génant pour le BO de Tours car ils doivent pister ces 15 commandes et les supprimer à la mano tous les jours.
    Peux-tu me donner la raison de leur réapparition stp ?
    As-tu une piste pour améliorer cette situation (quitte à ce qu'ensuite je demande à la DS de la réaliser si nécessaire). On en reparle.
    cdt
    Pascal gggg
    fff/gggg/hhhh GP/ffff Distribution/ffff FO D/
    MOA fff
    tél. 03 86 16 92 74
    mob. 04 44 25 39 29
    [email protected]
    De : DDD Jacques ddd NORM
    Envoyé : lundi 11 août 2008 08:07
    À : DDD Pascal ddd
    Objet : FFF - Anomalie BAL Logistique
    Bonjour Pascal,
    Ces commandes (du 29/11/2007 au 18/12/2007) bien qu'annulées reviennent chaque jour
    Cdt
    Jacques DDDD
    ";Babacar Sene;26/08/2008 10:00;07/10/2008 18:10;;DO ou prestataires externes;04-SUB - Résolu;SAV;2;Babacar Sene;11/08/2008 00:00;Christophe FFF -DO;1-CIGALE - SAV;40-Bloquant;;;Production;;;;"Problème du à au N) de sequence des bon_transport qui a fait un cycle complet 999999 et a recommencé avec les même N° de sequences, ce qui fait que deux dossiers se retrouvent avec le même N° de bon_transport.
    Solution :
    1/ Renommer tous les bon_transports qui sont antérieurs au 13/05/2008 de F0XXX.. en FEXXX.. pour eviter de nouveau cas dans les tables SAV et OM
    2/ Remonter les bons statut LIVRE des dossiers modifés chez FFF";;Babacar Sene;10-Soutien niveau 1 ou 2;;;
    End of datafile
    Why record2 "artf402772" fails ...
    Comparing with the 4 other records.. I don't see anything bad ..
    The size looks ok, I think...
    So probably the error is in the CTL ... ?
    I hope that I forgot nothing, and that my explanation is clear.
    Thanks in advance for your help.
    Olivier

    Well, by default SQL*Loader new line as end of record. Since your logical record in question consists of multiple lines each line is treated as a seaparate record. As a result, SQL*Loader finds a record with starting double quote without matching ending double quote. You must to use stream record format option in SQL*Loader by using
    INFILE whatever-your-infile-is "str X'xxxx'"where xxxx are charactercombination SQL*Loader should use as record separator in hexidecimal format.
    SY.

  • Locks in replication

    Hi,
    What locks does snapshot replication, transactional replication, merge replication holds.

    Hi,
    Snapshot replication places shared locks on all tables published as part of replication for the duration of snapshot generation. This can prevent updates from being made on the publishing tables. Concurrent snapshot processing, the default
    with transactional replication, does not hold the share locks in place during the entire snapshot generation, which allows users to continue working uninterrupted while replication creates initial snapshot files.
    The Snapshot Agent performs the following steps:
    1. Establishes a connection from the Distributor to the Publisher, and then takes locks on published tables if necessary:
    For merge publications, the Snapshot Agent does not take any locks.
    For transactional publications, by default the Snapshot Agent take locks only during the initial phase of snapshot generation.
    For snapshot publications, locks are held during the entire snapshot generation process.
    See:
    http://technet.microsoft.com/en-us/library/ms151832.aspx
    http://technet.microsoft.com/en-us/library/ms151706(v=sql.105).aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Referencing in Essbase

    We know in essbase we have got Level; Gen; and Parent-child Referencing. I would like to know scenario based examples. How is the calculation of selecting level or Parent-child or Gen Ref is done. and what are the best practices in selecting one against another.thanks in advance
    sriram

    its totally depend upon your data and the relation between them
    you can go for generation if data exist in continues range from top to bottom like
    country state district
    you need to go for level if data is coming
    district state country
    if your data is coming like this use parent child relationship
    country state1
    country state2
    state1 city1
    state1 city2
    state2 city11
    state2 city22
    for more details you must refer "DBAG" guide (chapter 16 page around 262) so you get conceptual knowledge.
    Thanks
    Dhanjit G.

  • I want to love my new Incredible but...

    There are a couple of issues that I'm seeing that I can't get a straight answer from anyone I talk to at Verizon either on the phone at a store.
    1 - Battery Life: I'll typically give my phone a full charge overnight. If, starting around 8:00 AM, I have a 'normal' day (not a ton but some online usage, a few calls & texts) my phone is totally dead by about 4:00pm.
    Is this normal? When I go to my local store with this question I'm not given a solid answer. Just told things I can do to help battery life. I would loove to hear a honest answer as to how much battery time I should realistically expect.
    2- Heat: I'm I use the phone for more than 5 or so minutes in a row the phone starts to get super hot. I can't even put it in my pocket afterwards because it's so uncomfortable. Again, I ask the question, is this normal?
    Please let me know the truth. If the answers are Yes then I can accept that but please just be honest with me & anyone else out there dealing with these issues.

    The battery has been a problem on the Incredible. I'd recommend you getting an extended battery. You can here on HERE. It should increase your battery life. Here are a few more tips.....
    Dim It
    The brighter your screen, the more juice you're using. If you're in a dimly lit room, turn down your screen's brightness.If you use your smartphone  to play music, lower the volume.
    Stop Searching
    It is great that you can use Bluetooth technology to connect your smartphone to a headset, or use Wi–Fi to speed up the downloading of e–mail messages. But when you're not using that headset or not near a Wi–Fi hot spot, turn off those features on the phone.
    Skip a Generation
    Your smartphone is also continually looking for a cellphone signal. If you're in a weak signal area, your phone must work even harder to find one, decreasing battery life. If you know that there is no coverage in your area, turn off your portable device's mobile capabilities
    Check Mail Manually
    Mobile smartphones can check for e–mail messages and instant messages automatically. Or they can be set to "push" notifications as soon as they arrive in your server's mailbox.
    Both strategies can be power hogs. To increase your battery life, turn off push and increase the interval between when the phone checks for new messages. Or better, set up your phone to check for messages manually.
    About heat, I don't have the incredible but on my phone it does get warm. If I am charging it it'll get warm or if I am talking on the phone for a long time. Never had any problems though.  

  • How to send wav file to NI audio out

    How do I send a wav file to the D/A Audio Out
    of a 6071E.
    A futher requirement is to send it out differentially
    using channel 0 and 1
    - Make Software User Friendly -

    I've attached an example to this posting. This example generates an analog output waveform on the board and channel specified. The waveform generated will be based on the WAV file selected. It is an example of the using a multifunction data acquisition board to play a WAV file on speakers.
    Instructions:
    1. Select the desired device and channel #.
    2. Enter the path to your 8 bit mono WAV file. ( a sample WAV file is included in attachment below)
    3. Enter the update rate for your Analog Output(AO) channel. This should equal the rate of your WAV file.
    4. Wire your speakers to the Analog Output channel
    5. Run it.
    6. The program will continue to loop the WAV file waveform on the AO channel until you clickthe stop button.
    How it works:
    An 8 bit mono WA
    V file is read from disk. After the data and header of the WAV file are extracted, the data is scaled from 0 to 1 V and then the entire waveform is written to the Analog Output channel specified. The example is set form continuous generation (or playback) and will continue looping the WAV files waveform until the stop button is pressed.
    I hope this helps.
    Regards,
    Todd D.
    NI Applications Engineer
    Attachments:
    WAV_File_to_AO_Channel.zip ‏30 KB

  • Probleme de configuration de noeud de sous-vi

    Bonjour,
    J'utilise un sous-vi pour afficher un graphe dans une seconde fenetre de mon application. Comment rafraichir le graphe sans que celle-ci devienne active? (je voudrais que la fenetre principale de mon application reste active quand le graphe du sous-vi est rafraichie dans la seconde fenetre). J'ai regarde les options "Configuration du noeud du sous-vi" en faisant un clic droit sur celui-ci au niveau du diagramme + les options dans "Fichier / Proprietes du Vi / apparence de la fenetre" mais sans succes.
    Merci,
    JF 

    Bonjour,
    Merci pour votre reponse. J'ai essaye de rajouter votre code mais ca ne correspond pas tout a fait a ce que je souhaite faire (j'ai peut etre mal compris votre code). Ci joint un exemple simple code avec Labview 8.2: le vi principal genere un sinus en boucle et l'affiche dans un graphe, ce graphe est egalement affiche dans une seconde fenetre via un sous-vi. Je voudrais que les donnees soient rafraichies dans les 2 fenetres sans que l'une ou l'autre passent en face avant quand elles recoivent les donnees (ie que je puisse passer d'une fenetre a l'autre uniquement par clic souris).
    Merci,
    JF 
    Attachments:
    exemple.vi ‏51 KB
    graph_window.vi ‏19 KB

Maybe you are looking for