PUK Locked insert SIM with no PIN lock to activate ipad

please invistage to me this matter

PUK locks are controlled by wireless carriers. Contact the source of the
sim to get the PUK or change the sim. Unless the iPad was purchased
as subsidized and therefore locked to a wireless provider, the iPad
should not be locked.

Similar Messages

  • Insert a vaild SIM with no PIN lock to activate iPAD

    PUK Locked 
    Insert a valid SIM with no PIN lock to active iPAD
    Unlock

    Your post is rather difficult to decipher. Please state a complete question so that we understand what it is you wish assistance with. Meanwhile, perhaps this will help:
    http://support.apple.com/kb/HT1316
    Regards.

  • No SIM card installed insert a valid SIM with no pin lock to activate iphone

    Dear Sir, Recently I noticed that my iphone 3GS is responding very slowly, I thought it got hanged due to the high memory usage so I restarted it but after the restart it showed me iTunes logo & a USB cable. Though the SIM card inside the phone doesn’t have any lock but the message says: No SIM card installed insert a valid SIM with no pin lock to activate iphone. When I connected it to itunes I get this message: iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes, there was a passcode on my iphone which can not be unlocked now as after sliding the arrow the only options I get are: emergency calls & info’s  as IMEI: 01 215500 xxxxxx x & ICCID: Unknown. I was suggested to delete the complete programme & get the iTunes reinstalled but I don’t want to lose my data. Can you help me to get my data back? Pls. reply ASAP. Thanks & regards.

    ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.

  • New Iphone 4 factory unlocked: "No SIM" "Insert Valid SIM with no pin lock"

    Hi, I'm new in the forum.
    I've just bought a new factory unlocked Iphone 4 from a top rated seller in USA, came back to my country, inserted my Sim in the Iphone, and got the message:
    "No Sim" "Insert valid sim with no pin lock to activate Iphone"
    This Sim I was using in my old Iphone and actually in a Blackberry Storm.
    After the message I put it back again in the BB, and it works fine.
    But in the Iphone I get always this message.
    One thing: My SIM is a regular one, and I had to use a tempalte available in the net to cut it into a micro SIM.
    In the BB it keeps on working.
    Any idea?
    Thnak you
    Luis

    I answer your question:  I buy a lot of things from ebay, and I just looked for "an original factory unlocked" one, assuming their are original, just that.
    If I had known I could have bought it CHEAPER directly in Apple, I would have never done it in ebay! (I was told in my country that if you buy in the web, normally you get a discount, sound logic to me.
    On the other hand I saw that this seller sold over 1000 Iphones and I trusted that's all.
    I'm not dealing with phones, I sell art.
    Anyway I still trust what is written there, that they are factory unlocked, and I'll try what you say tomorrow with my carrier: I'll buy a micro sd, and if it still doesn't work, I'll write this seller to see what's going on
    Thanks for your advice
    Luis

  • Hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

    hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

    http://support.apple.com/kb/ts3694#error29
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • HT2731 i hav iphone and i restart it and delete all the files inside how can i start again my iphoe it say i need a valid sim with no pin lock to activate it again pls help

    i hav iphone and i restart it and delete all the files inside how can i start it again it say i need a valid sim with no pin lock to activate iphone again

    ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.

  • Insert valid sim with no pin code

    i buyed iphone 4s ....i updated it to ios 5.0.1 now it starts from start screen and says insert valid sim with no pin code....what does this mean i inserted many sim cards but not working ....m stuck at activation screen n cant do anything...my baseband is 1.0.13 and having model 9A405

    It is what I thought already. The problem is, that when you buy a second hand iPhone, you never know what someone did to it. A jailbroken iPhone you should never try to update, because then it won't work anymore. You can use it, but NEVER try to update. This was a painful lesson, I feel for you. In this forum you will not find any halp on this problem. You may try in some other forum perhaps.

  • Hi i ve iphn 5 with t.mobile.. iwanna put anothr sim in it..it saying instal valid sim with no pin lovk to acti vat...wht i ve to do..plzz let me know...

    i wanna put anothr sim in it..it saying instal valid sim with no pin lovk to acti vat...wht i ve to do..plzz let me know    help me

    Only the cell carrier to whom the iPhone is locked can authorize unlocking. You will need to contact T-Mobile and as them about getting your iPHone unlocked.
    Regards.

  • Can't unlock my SIM with its PIN (iPhone 4S in Germany)

    I'm a T-Mobile Germany customer and I can't unlock my SIM card with the PIN number in my iPhone 4S. I can unlock the SIM card just fine in another phone, and it works without problem in my iPhone 4S as long as there's no SIM PIN on the card, but attempting to set a PIN on the card causes the phone to just sit there and wait and wait.
    T-Mobile Germany stated that they are working with Apple regarding some kind of SIM PIN related problems (dropped calls, no SMS messages, etc..) on the iPhone 4S, but they state that it's not a T-Mobile problem (other carriers have it too), nor is it a problem with the SIM cards. That means there's a hardware/software fault on the iPhone 4S, and if that's true, then it must affect people outside of Germany.
    Is anybody else experiencing SIM PIN related problems with the iPhone 4S? Anybody who doesn't live in Germany/didn't get their phone from Germany?

    hello i am using 5.0.1 iphone 4s for about 2 months. Last night i spoke with my friend and the morning my signal looks like 5 bars but i noticed that i couldn’t make a call the phone freezes and i couldn’t unlock my sim card.
    i tried t restart my phone 3 times but nothing i changed the sim 2 times and put my original sim back and works but today the same problem.
    ok i unlocked my sim card after 3 restarts but with 5 bars carrier  cant make cals Any solution ?

  • Insert valid sim with no PIN lock

    Bought Iphone 4g with no sim contract. Activated it and started sync, without sim inside. After this, iphone required to insert valid sim. It doesn't work with my sim inside. Iphone has been bought with no sim contract. Pls help.

    Hi, pls see reply from apple store team below. They've said it was an error and promised to help. BUT when I'm truing to activate it, itunes shows the same screen and there is NO RESTORE option...
    I am sorry to hear that your iPhone 4 seems to be locked. I have reported the problem to our technical team who will remotely unlock your iPhone within the next 24-48 hours. Once this has been done (by Tuesday evening at the latest) please connect your iphone 4 to the latest version of iTunes & choose the "Restore" option. This will then complete the unlocking process.

  • I keep getting the message :No SIM card installed   Insert a valid SIM with no PIN lock to activate iPhone - there is a sim in the tray in the phone...how do I fix this?

    I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
    There is a sim card installed...
    My carrier (virgin) say that they have unlocked the phone from optus.
    How do I fix this?
    thanks
    Anushka

    Virgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
    They also said they would unlock my iPhone 4 - which has been done!  So there's obviously something wrong with the phone...

  • HT1430 i dont really have knowledge about this its so confusing.it try putting new sim with no pin lock to activate it again but still nothing only itunes on screen

    help

    I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
    I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
    Anyway, if you choose to do so, you can leave feedback here:
    Apple.com Feedback
    Apple Support Feedback
    Developer Feedback
    Product Feedback
    QuickTime Feedback
    Search Feedback

  • Setting up my iPad and it keeps coming up with the message could not activate iPad server cannot be reached

    Cannot activate iPad on initial setup due to it can't find the server to activate the iPad it will connect to wifi but I do not have a computer to connect it to iTunes manually 

    Hi, Docs123. 
    I would recommend making sure you are updated to iOS 7.0.3 and see if that resolves your issue as it provides a fix for issues related to iMessage.  If the issue persists I would recommend going through the troubleshooting steps in two articles I have attached below.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Make sure to create a backup prior to updating your device.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Regards,
    Jason H.

  • No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone

    How do i solve this problem?
    No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone

    You do what the message instructs you to do and insert a Valid SIM with no PIN lock.

  • My Iphone was not unlocked and i accidentally upgarded my phone. Now it asks me to get insert a SIM without a PIN lock and would only let me make emergncey calls. How do i get phone working ?

    My Iphone was not unlocked and i accidentally upgarded my phone. Now it asks me to get insert a SIM without a PIN lock and would only let me make emergncey calls. How do i get phone working ?

    You will need to establish an account with whoever the phone is locked with and restore it. Or you will not to unofficially unlock it again.

Maybe you are looking for

  • Error while doing confirmation with cor6

    Dear PP gurus, I am getting following error while doing confirmation. please suggest. "Error while importing from memory QAPO SAPLQEEV 0400000363" Thanks in advance Kailash T.

  • Issues with JScrollPane

    Hi everybody I created a class to display help dialogs dynamically created, because I'll need lots of help windows. I decided to created it based on 2-dimensional arrays of data. Up till here, everything is fine. But I'm facing some problems with the

  • Neep help regarding limiting rows

    Hi there.... I HAVE TWO TABLES IN OUR HUMAN RESOURCE DATABASE AND THEIR STRUCTURE IS AS UNDER: SQL> desc personal Name Null? Type EMP_ID NOT NULL NUMBER(5) F_NAME VARCHAR2(20) L_NAME VARCHAR2(20) PIC LONG RAW FAT_NAME VARCHAR2(30) P_ADDRESS VARCHAR2(

  • This SQL statement always in Top Activity, with PX Deq Credit: send blkd

    Hi gurus, The following SQL statement is always among the Top Activity. I can see the details in Enerprise manager that it suffers from PX Deq Credit: send blkd This is the statement: SELECT S.Product, S.WH_CODE, S.RACK, S.BATCH, S.EXP_DATE, FLOOR(Qt

  • How to hide all Videos in Lightroom ?

    Hello, I edit Photos with Lightroom only. How can I hide the Videos from Lightroom? I just want the Photos to be shown. Cheers mARTin