Pulisher CUCM web page not display

Hello,
Publisher cucm web page not displayed and DB not accessible IP phones working on Subscriber but I can't change any settings.Cisco Tomcat service not working and I can't restarting. (ver. 7.1.5)

If you cannot change any config then it's more than just not being able to use a webpage, there must be some problem with the ccm/DB services on the PUB.
SSH to the server and see if there are error messages, I'd suggest a whole reboot.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Why do some web pages not display correctly in Firefox?

When I go to certain websites the text formatting in Firefox comes out to where hyperlinks and lines of text are displayed on top of one another but the same site is formatted properly when I load it in Internet Explorer.

You may have zoomed the page(s) by accident.<br>Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Google web page not displaying correctly

Since updating to v24.0 of Firefox (desktop) the Google web page does not display correctly.
If I use the IE tab 2 in FF or even IE10, I see the pagwe in it's full 'glory' including the black menu bar across the top were you can select Gmail or Calendar etc etc
However, in FF (without using the IE Tab 2) this menu bar across the top of the page does not display ... and to add insult to injury ... some web links o certain pages don't seem to want to work either !!!!
Anyone know what's gone wrong here as I can't figure it out ?!?!?!
Thanks

Whenever my Google UI changes drastically, I clear all my Google cookies and usually that fixes it. Sometimes I have to do that AND restart Firefox.
If you haven't already tried it... When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Web pages not displaying properly IE9

Hello,
Using Windows 7 32 Bit enterprise edition and IE9. Web pages are not loading properly but it works fine in Chrome and other browsers. Followed the below steps also. It did not help. Please let me know the other steps.
1. Click Start, type in “inetcpl.cpl” and press Enter.
2. Switch to Advanced tab.
3. Select the Use
software rendering instead of GPU rendering*
4. Check if the issue has been resolved.
5. If not, please Click Reset twice under Advanced tab to reset IE settings.
Regards,
Boopathi S

Hello Robear,
Please find the below answers.
1. When (approx. date) was the Win7 (32-bit) computer purchased?
It is purchased on 11-Auf-2014
2. What is the
full name of the installed anti-virus application or security suite andwhen (approx. date) does the current subscription expire? What anti-spyware applications (other than Defender) are installed? What third-party firewall (if any)?
Microsoft forefront endpoint protection
3. Has a(nother) Norton application
or a McAfee application EVER been installed on the computersince it was purchased?
No. It is reimaged with customized OS
4. Did a Norton free-trial
or a McAfee free-trial [PICK ONE] come preinstalled on the computerwhen it was purchased? (Doesn't matter if it was never used or Activated.)
I do not know
5. Is KB3003057, KB3006226, KB3010788, KB2992611, KB2993958, KB3005607, KB2978120, KB3003743
and/or KB3002885 listed inInstalled Updates (not
Update History)? [1]
All the above mentioned updates are not installed.
6. Is Adobe Flash Player
v15.0.0.223 (or higher) installed? TEST HERE USING INTERNET EXPLORERONLY! =>
http://www.adobe.com/software/flash/about/
Adobe Flash Player 11 ActiveX 11.9.900.117 is installed
7a. When (exact date) was
Internet Explorer 9 installed according toInstalled Updates?
7b. What Update Version & KB number are displayed in the
second line of text in IE9's Help | About [Alt+H+A] tab; e.g.,Update Version: 9.0.54 (KB1231231) ?
7c. Has the
IE10 Blocker Toolkit and/or theIE11
Blocker Toolkit been installed?
No
8. Is Firefox, Chrome or any other alternate browser installed?
No
9. Are you in the habit of using "Registry cleaners" (e.g., Registry Mechanic;
System Mechanic; RegCure; RegClean Pro; Advanced SystemCare; Registry Booster; McAfee QuickClean; Glary Utilities; AVG PC TuneUp; Norton Registry Cleaner; PCTools Optimiser; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System
Cleaner; Advanced System Optimizer; CCleaner's Registry Cleanercomponent)?
Not used any cleaners

Verizon web pages not displaying correctly

I am having a problem displaying most of the Verizon web pages, including the forum pages. The pages look like the header icons are sustituted with text links throughout the pages, sometimes overlaying other areas. Check the attachment for two samples. this makes them very difficult to navigate. I have not noticed this on any pages other than Verizon's, but I suppose there may be some somewhere. Find it hard to believe my browser only has the problem here. It only is an issue on my desktop pc. My laptop is ok. The only changes I made just before this happened was to uninstall a runaway Verizon In-Home Agent that was in an endless loop trying to get an update. Any ideas?
Thanks
Solved!
Go to Solution.
Attachments:
vz pages.jpg ‏331 KB

Try adding verizon.com to your Trusted Sites zone in Internet Explorer.
To do so, double-click the "Internet Zone" thing down there ▼ to bring up the Security panel, select the Trusted Sites zone and click the Sites button. Then enter "verizon.com" and click Add. You will have to uncheck the "Require server verification" box.
That should fix the problem.

Web page not displaying properly - content in wrong place

It's been years since I've done html and this is the first time using Dreamweaver. All my pages have the same header then a horizontal row of link buttons. I have used Divs to create 3 sections of content underneath this. Each div has the following defined for it: #Div { position:absolute; width:913px; height:440px; z-index:1; left: 10px; top: 302px; My main page is not displaying properly. There is a section on the left with text/photo. To the right of this section, there is a second div containing an image map. In Dreamweaver, I preview the page (using Chrome) and it looks fine. However, when I upload it to the web site and then view that page in the web site, the second div is thrown to the upper top right of the page. I do not know what is causing this and how to fix it. Can anyone answer this and perhaps give me some tips?

Start by fixing your HTML errors. You have a significant number of them.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgivethegaveltotavel.com%2F
Also, you have some CSS errors.
W3C CSS Validator results for http://givethegaveltotavel.com/ (CSS level 2.1)
Position:absolute is never a good way to layout your web pages. For 98% of what you do, positioning is not required and should be avoided. Learn to use CSS margins, padding and floats to align elements where desired.
CSS margin property.
CSS padding property
CSS Float
Nancy O.

Web pages not displaying properly

I just recently acquired 2 iMac G3' for my kids. The main issue I have right now is that the webpages do not seem to display properly. The current browser is Explorer 5.1 I believe, and I realize that this is not even being supported anymore. Can I make web pages display correctly without having to update to OS X, or would that be the recommended path since it uses SAFARI as the browser. I also intend to add an additional 512M of SDRAM.

I refurbish a lot of iMacs and used to use OS 9 on my Beige G3.
I had to move to OS 10.3.9 and 10.4.9 just because of the problem you are talking about. I also found IE 5 to be a pain.
I now use FireFox and it works fine.
First do the FirmWare upgrade while you're still in OS 9:
http://docs.info.apple.com/article.html?artnum=86117
Yes moving to 512 MBs of memory is a very good idea.
I have 2 iMacs for my 7 & 8 year olds (pink for my daughter) both running 10.3.9, ~ 512 MB memory and 20 GB hds.
They've been running for 2 years no problem. One with Maple Story which only runs on a PC so I have a P IV Vaio running XP Pro. Have had to reinstall the OS once already in 1 month and just now he's asking for me to look at it again.
Richard

My google site (web page) not displaying embedded google docs on ioS5

I have a google site that is used to share information for team parents of HS sports team. We utilize a google doc on Home page for Quick Announcements--such as last minute changes. The document is shared and public to all. It works great on Chrome, Firefox and IE but the embeded google doc does not display on Apple products. Other tabbed pages that have spreadsheets that are public and shared to all show up just fine. What is going on???

Start by fixing your HTML errors. You have a significant number of them.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgivethegaveltotavel.com%2F
Also, you have some CSS errors.
W3C CSS Validator results for http://givethegaveltotavel.com/ (CSS level 2.1)
Position:absolute is never a good way to layout your web pages. For 98% of what you do, positioning is not required and should be avoided. Learn to use CSS margins, padding and floats to align elements where desired.
CSS margin property.
CSS padding property
CSS Float
Nancy O.

Inserting tabbed navigation code makes my web page not display in design view..

Hi everyone..
I am on Dreamweaver 8 for MAC, and was working on a couple of web pages..these pages included divs and tables. But when I tried inserting a tabbed navigation I found at:
http://www.dynamicdrive.com/dynamicindex17/tabcontent.htm
In a nutshell, it asked me for step 1 to:
Step 1: Insert the below CSS and script into the HEAD section of your page:
<link rel="stylesheet" type="text/css" href="tabcontent.css" />
<script type="text/javascript" src="tabcontent.js">
* Tab Content script v2.2- © Dynamic Drive DHTML code library (www.dynamicdrive.com)
* This notice MUST stay intact for legal use
* Visit Dynamic Drive at http://www.dynamicdrive.com/ for full source code
</script>
The next step was this:
Step 2: Finally, simply add the below HTML to where you wish the Tab Content to appear on the page:
<h3>Demo #1- Basic implementation</h3>
<ul id="countrytabs" class="shadetabs">
<li><a href="#" rel="country1" class="selected">Tab 1</a></li>
<li><a href="#" rel="country2">Tab 2</a></li>
<li><a href="#" rel="country3">Tab 3</a></li>
<li><a href="#" rel="country4">Tab 4</a></li>
<li><a href="http://www.dynamicdrive.com">Dynamic Drive</a></li>
</ul>
<div style="border:1px solid gray; width:450px; margin-bottom: 1em; padding: 10px">
<div id="country1" class="tabcontent">
Tab content 1 here<br />Tab content 1 here<br />
</div>
<div id="country2" class="tabcontent">
Tab content 2 here<br />Tab content 2 here<br />
</div>
<div id="country3" class="tabcontent">
Tab content 3 here<br />Tab content 3 here<br />
</div>
<div id="country4" class="tabcontent">
Tab content 4 here<br />Tab content 4 here<br />
</div>
</div>
<script type="text/javascript">
var countries=new ddtabcontent("countrytabs")
countries.setpersist(true)
countries.setselectedClassTarget("link") //"link" or "linkparent"
countries.init()
</script>
<p><a href="javascript:countries.cycleit('prev')" style="margin-right: 25px; text-decoration:none">Back</a> <a href="javascript: countries.expandit(3)">Click here to select last tab</a> <a href="javascript:countries.cycleit('next')" style="margin-left: 25px; text-decoration:none">Forward</a></p>
<hr />
Well, I did all the steps required, but when I put this inside a div I had inside a table, all of a sudden I couldnt see anything in my design view, only two tables that arent even the same size..When I take out all this code, I get back my regular page..Can I see this tabbed navigation in my design view? Unfortunately, I dont have the spry widgets since I am on Dreamweaver 8..If I preview it in both Safari and Firefox (on Mac Firefox/3.0.8) (Safari 3.2.1) I can see everything fine, including the tabbed navigation..But designing in code isnt really helpful because I want to see what it looks like in design view, in case we change things-its just easier for me to work on..So I assume there is something in this code that is making my design view show nothing..
Update:I tried taking out the code again, but this time, I couldnt see anything again, even without this code..
I know that I can go to validation website, and I got a lot of errors-but all the pages I have that are in the same style have those same errors too—and they display fine..its only when I insert this specific piece of code that everything goes haywire..Is it even possible to view tabbed navigations (like the one in the above link) inside of Dreamweaver Design View?
Any help would be appreciated..

DW8 doesn't render any dynamic content, so I'd say it's a no go. You'll just have to live with that limitation or upgrade to CS4...
Mylenium

View/Resolution/Font is incredibly small resulting in web pages not displaying properly (Facebook) & I can not find internet tools options or compatibility view otions

I've tried different things to adjust this problem on my laptop, but nothing is working. I uninstalled firefox because this was very irritating. I just reinstalled after being away for 2months and the problem still exists. My laptop settings are for normal display and font sizes and everything is normal when I use internet explorer, but when I use firefox...everything shrinks. When I'm on facebook using apps...it gets even smaller and app screens will not display properly. There is no internet options or compatibility view settings on this new firefox that I can find and I'm out of ideas on how to fix this.

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Web page not displaying

Has anyone run across a problem with others not being able to see the web page Lightroom made. I used the Jardine Pro template. It works fine for me using a Mac and PC and 3 different browsers but I've had one person tell me they only see a blank screen that's brown (the background color)
www.duendevision.com/LaVie
Thanks much
Duende

Don, tomrock
They both sent the links they used in their emails and they worked fine when I clicked on them. And as mentioned one of them for sure goes to the site since she gets the brown back ground. I'm waiting to see if they work with a link made by Picasa which is simple html. It seems Lightroom uses XML and there may be updates needed to their browsers to work (is my only guess) but I wouldn't know what update.

NON Verizon web page not displaying at all

Site http://forum.greytexpectations.org/
Does not display on all my home machines-this morning it displayed on one machine and not on 2 others!
Please respond with a fix ASAP.
Ising IE8 with current MS fixes.

bode225 wrote:
eljefe wrote:
I get a 404 Not Found error from that link, both with IE8 and Firefox. I suspect the website is down.
This doesn't seem to be a Verizon related problem to me.
its your problem!
Negative.
We do not work for Verizon. We are end users, like you.
If you want to speak to Verizon, go to http://www22.verizon.com/content/contactus/ - and
#1 Call them.
#2 Text Chat with them.
#3 Write them an e-mail.
#4 Wriite them a letter.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

WebCenter Web Page Not Displaying Correctly

Has anyone ever seen this error? *"Skip navigation elements to page contents"*
The page is completely scrambled. Nothing displays correctly. It only happens when I try to restrict access to the page. Here's the page restriction within the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>NonAdminPages</web-resource-name>
<url-pattern>faces/Graphs.jspx</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>users</role-name>
</auth-constraint>
</security-constraint>
When I use this, it works correctly:
<security-constraint>
<web-resource-collection>
<web-resource-name>NonAdminPages</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>users</role-name>
</auth-constraint>
</security-constraint>
Of course, when I use the above url pattern, it gives everyone access to all of the pages.
Also, I tried deleting the oracle-desktop-10_1_3_3_0-en-ie-6-windows-s.css file in the "\WEB-INF\temp\adf\styles\cache\" directory. This did not work. (I read that this might fix the error from Bug No. 5616568)
Any help that anyone can provide would be greatly appreciated.
Thanks,
Derek
P.S. I using JDev 10.1.3.3.0

thanks for any help
regards

Please help. my images/web page not displaying ( just outlines) when checking in my browser

Hi. I am using an old dreamweaver. thats not the problem. I
view my web site in browser to check all ok. When i click my link
to next page, it will open it in new window as it should do, but
displays no images (apart from my email link) just outlines.
Is it my folder location?? it is c:/mywebsites/mywebfolder
If i open each page directly to view they are all fine just
when i go from my links..
Helpppppp please

Did you define your local site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"janeie" <[email protected]> wrote in
message
news:es3v7h$mo9$[email protected]..
> Hi. I am using an old dreamweaver. thats not the
problem. I view my web
> site in
> browser to check all ok. When i click my link to next
page, it will open
> it in
> new window as it should do, but displays no images
(apart from my email
> link)
> just outlines.
> Is it my folder location?? it is
c:/mywebsites/mywebfolder
> If i open each page directly to view they are all fine
just when i go from
> my
> links..
> Helpppppp please
>

Login action buttons no longer work and some pages not displaying correctly after upgrade.

After recent update, some web pages not displaying correctly and Login buttons on some sites do not work. I've updated my plugins and restarted computer, but problems remains. Is this Java, Javascript or something else? Same pages are working fine in IE.

Please update the firefox to the latest version of firefox 26
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Pulisher CUCM web page not display

Similar Messages

Maybe you are looking for