Pull list for the component of the phantom assembly

Hi
I am in rem process. while doing the pull list for the fianl product using Entry with bom explosion.
i did not get the components (level 3)for 1 assembly(level 2 ) which is phantom one under the final product (level 1) BOM.
i also maintained the production stor loc for the components and the phantom assmy.
i check the stock in the production storage location . no stock is there in the location.
what is the problem . how to get the component of the phantom in the pull list.

Dear Raj,
If your FERT contains a HALB and inturn this HALB contains say HALB1 which is a phantom assembly
and and another 2 raw materials means,when you execute MF60 For HALB,you will get the 2 raw
materials along with the component's of phantom assembly.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

To set a dropdown list for one column in the excel file before downloading

Hi all,
I am downloading an excel file which has the format of an internal table with a number of fields. I want to set a dropdown list for one column in the excel file. How can i do this?
Thanks

HI ,
U can use function module " QINT_GET_EXCEL_DATA " ....
and modify the excel sheet based on ur requirement ......
Try this ...
Hope it works
Thanks
Shambhu

Can i use one JSF component's value for other component in the same page.

Can i use one JSF component's value for other component in the same page.
For example
I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like:
<h:commandButton disabled="#{myChk.checked}" action="myAction" value="myValue" />
** "myChk.checked" >> I am just asuming "checked" property is available...

Bind the checkbox to a UIInput myChk property. Then you can reference this property from the page, e.g.
<h:selectBooleanCheckbox binding="#{myBean.myChk}" onchange="submit();" />
<h:commandButton disabled="#{myBean.myChk.value}" action="myAction" value="myValue" />

Build Plugin IS NOT DEFINED for this component or the defined Build Plugin

Hello,
we have upgraded our NWDI (nw04s) to SP13 and to DB2 V.9. We don't know if this has something to do with our problem. The NWDS developers called us. They can't activate the changes anymore. When I check the CBS I can see, that all components are broken. Any idea?
REgards,
Alexander
Build number assigned: 487
Change request state from QUEUED to PROCESSING
REQUEST PROCESSING started at 2007-10-10 10:46:13.526 GMT
    BUILD request in Build Space "NW1_GPMS_D" at Node ID: 27,972,750
     [id: 473; parentID: 0; type: 2]
    Waiting for access: 33 ms
    ===== Pre-Processing ===== started at 2007-10-10 10:46:13.559 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 10:46:13.702 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'
                'zurich.com/gpms/yea' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwd' variant 'default'
                'zurich.com/gpms/chgpwd' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/rep' variant 'default'
                'zurich.com/gpms/rep' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/model' variant 'default'
                'zurich.com/gpms/model' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/idp' variant 'default'
                'zurich.com/gpms/idp' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovt' variant 'default'
                'zurich.com/gpms/ovt' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/arch' variant 'default'
                'zurich.com/gpms/arch' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/myr' variant 'default'
                'zurich.com/gpms/myr' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/div' variant 'default'
                'zurich.com/gpms/div' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ume' variant 'default'
                'zurich.com/gpms/ume' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/com' variant 'default'
                'zurich.com/gpms/com' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovw' variant 'default'
                'zurich.com/gpms/ovw' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/obj' variant 'default'
                'zurich.com/gpms/obj' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwdb' variant 'default'
                'zurich.com/gpms/chgpwdb' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/pdata' variant 'default'
                'zurich.com/gpms/pdata' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
        Analyze request DC BV... finished at 2007-10-10 10:46:14.049 GMT and took 347 ms
        Prepare build environment in the file system... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
            Synchronize used libraries... started at 2007-10-10 10:46:14.068 GMT
            Synchronize used libraries... finished at 2007-10-10 10:46:14.068 GMT and took 0 ms
        Prepare build environment in the file system... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
    ===== Pre-Processing ===== finished at 2007-10-10 10:46:14.069 GMT and took 510 ms
    Waiting for access: 3 ms
    ===== Processing ===== started at 2007-10-10 10:46:14.072 GMT
        No Components to be built.
        BUILD DCs
    ===== Processing ===== finished at 2007-10-10 10:46:17.407 GMT and took 3 s 335 ms
    ===== Post-Processing =====
    Waiting for access: 5 ms
    ===== Post-Processing ===== started at 2007-10-10 10:46:17.412 GMT
        STORE build results... started at 2007-10-10 10:46:17.413 GMT
            "zurich.com/gpms/jco_pool" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/jco_pool": store meta-data
            "zurich.com/gpms/jco_pool" in "default" variant is PROCESSED
            "zurich.com/gpms/yea" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/yea": store meta-data
            "zurich.com/gpms/yea" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwd" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwd": store meta-data
            "zurich.com/gpms/chgpwd" in "default" variant is PROCESSED
            "zurich.com/gpms/rep" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/rep": store meta-data
            "zurich.com/gpms/rep" in "default" variant is PROCESSED
            "zurich.com/gpms/model" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/model": store meta-data
            "zurich.com/gpms/model" in "default" variant is PROCESSED
            "zurich.com/gpms/idp" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/idp": store meta-data
            "zurich.com/gpms/idp" in "default" variant is PROCESSED
            "zurich.com/gpms/ovt" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovt": store meta-data
            "zurich.com/gpms/ovt" in "default" variant is PROCESSED
            "zurich.com/gpms/arch" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/arch": store meta-data
            "zurich.com/gpms/arch" in "default" variant is PROCESSED
            "zurich.com/gpms/myr" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/myr": store meta-data
            "zurich.com/gpms/myr" in "default" variant is PROCESSED
            "zurich.com/gpms/div" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/div": store meta-data
            "zurich.com/gpms/div" in "default" variant is PROCESSED
            "zurich.com/gpms/ume" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ume": store meta-data
            "zurich.com/gpms/ume" in "default" variant is PROCESSED
            "zurich.com/gpms/com" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/com": store meta-data
            "zurich.com/gpms/com" in "default" variant is PROCESSED
            "zurich.com/gpms/ovw" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovw": store meta-data
            "zurich.com/gpms/ovw" in "default" variant is PROCESSED
            "zurich.com/gpms/obj" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/obj": store meta-data
            "zurich.com/gpms/obj" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwdb" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwdb": store meta-data
            "zurich.com/gpms/chgpwdb" in "default" variant is PROCESSED
            "zurich.com/gpms/pdata" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/pdata": store meta-data
            "zurich.com/gpms/pdata" in "default" variant is PROCESSED
        STORE build results... finished at 2007-10-10 10:46:17.440 GMT and took 27 ms
        Change request state from PROCESSING to SUCCEEDED
        Analyze effect of applied changes to buildspace state... started at 2007-10-10 10:46:17.440 GMT
            Skip check for build time dependency cycles. DC metadata is not changed.
            Determine components that have become DIRTY due to the results of this request started at 2007-10-10 10:46:18.601 GMT
                No such components have been found.
            Determine components that have become DIRTY due to the results of this request finished at 2007-10-10 10:46:18.602 GMT and took 1 ms
            No Internal Build Requests are canceled by this request
        Analyze effect of applied changes to buildspace state... finished at 2007-10-10 10:46:18.642 GMT and took 1 s 202 ms
        Request SUCCEEDED
    ===== Post-Processing ===== finished at 2007-10-10 10:46:18.646 GMT and took 1 s 234 ms
REQUEST PROCESSING finished at 2007-10-10 10:46:18.646 GMT and took 5 s 120 ms
    ===== Pre-Processing ===== started at 2007-10-10 07:16:55.069 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 07:16:55.104 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'

Here are some things to have a look at:
- Check your SC definitions and their Usage Dependencies in the SLD
- Check that the basis SCA's have been imported into the track. You can quickly see this by having a look at the total nr of DCs for these SCs in CBS.

Component visibility getting delay while drop the component in the Panel

Hi,
In my project I have used drag and drop functionality to drop the Icon from 1st panel to 2nd panel. The 1st panel contains three buttons with different icons and the 2nd panel is added as the destination (Drop place) in the desktop pane. While drag and drop I have used a panel and label to place the icon in the 2nd panel. The icon which is available in the label visibility getting delay(nearly 5 - 10 sec) at the first time drag and drop. After that there is no time delay for the drag and drop. This happens all the time while start my project. I have tried repaint() and revalidate() for all the panels still the delay is there. Kindly suggest any idea to reduce the delay.
Thanks in advance...

Component visiblity getting delay while drop the component in the panel in java swing with comment "Kindly suggest any idea to reduce the delay" - A SSCCE by @MadProgrammer

To issue the component to the Production Order

Hello All,
I have assigned the component to the Operation of Production Order from Different plant(say 1100) of Same company code(1000).
I want to issue that material from that plant to this plant (say 1000) of Production Order.
So my question is the correct method of directly issuing the component to this Production Order of different plant.
Shailendra

Hi HAdkar
The correct procedure is .
You have to assign special procurement key 80 in material master for which you want to procure from plant 1100. The material master of procuring material should exist for the plant 1100. While running MPR the procurement proposal will be automatically created in the 1100 plant. From 1100 plant you do stock transfer to your storage location. Then finally do GI for the header prod order in you plant.
This is the procure in SAP. Eventhough both the plants exist in the same compound.
Regards
J . Saravan

Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install.

Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install. Is in install mode screen and Extension Manager does not install. Help me!

What you said confused me. You uninstalled it. You does not want to install. Why do you install it again? Could you explain it clearly?

Getting null value for inputfile component in the popup

Hi,
My requirement is when i select the selectBooleanCheckBox a popup has to be rendered and with in that popup i have to display the inputfile component when i browse it should read the appropriate file.
But i am getting null from the input file component.
I written the code like this:-
1.First i have written a value change listener for the selectBoolenCheckBox.
2.I am rendering the popup from the valueChageEvent.
3.And i written the dialogListener for the Dialog in the popup.
and the code for the Dilog listener is:--
public void readingInputFile(DialogEvent dialogEvent) {
inputFile1.getValue();
//it is giving null value.
thanks in advance.
From
Srikanth.V

thanks for giving suggestion.
but i am not able to understand what meant by multipart in dialog page.
Actually,The code i written was:--
1. for selectBooleanCheckBox i written value chage listener
onChangeValue(ValueChageEvent valueChageEvent){
// in this i call the method to raise popup;
risePopUp();
2.The popup structure has follows:-
af:form --> af:popup ---> af:dialog --->af:inputfile
for this dialog i have written dilogListener:
getInputFile(DialogEvent dialogEvent){
//giving null for the inputFile,getValue();
for this dialog i don't have any multipart property
From,

Due list for invoice is showing the S1 canceled documents

Due list for invoice list (VF24) is showing the documents which are S1 billing type
how can we restrict the S1 canceled documents in due list for invoice list
Thanks and Regards
Kishroe

Hello,
if you never want S1 documents in invoice list, then run VOFA and clear the field 'Invoice list type'.
In this way S1 documents are not relevant for Invoice list.
To update th Invoice list status of existing S1 documents, see the SAP note[ 1078149|https://bosap-support.wdf.sap.corp/sap/support/notes/1078149].
Best regards,
Ivano.

On secound shippment list for pre orders on the evo 4g

i pre orderd my evo 4g on may 26th 2010 after doing so i was told i was on secound list for the secound shippment when is that going to happen cuz rs said i could get one on the 4th should i return my pre oreder and goto radio shake not knoking bb theve ben my fav store for years buy whats the sence of a preorder if your not going to get it on launch day thanks
Solved!
Go to Solution.

The cutoff for launch day was 5-21. Since you preordered after that, you preordered for the second shipment which arrives on 6-9. You did have more than two weeks to preorder for the first shipment.

New filed for F4 hit list for IB component - PCUI

Hi All,
I have a requirement,
A new filed "street" has to be added for the F4 hit list when searched on I Base component.
The BSP application is CRM_BSP_FRAME
Application     COMM_IBASE_M_F4
Appl.Set             COMM_IBASE
Structure Name       CRMT_BSP_IBASE_CS_F4
Field Group         IBA_TREE_NF_F4
Structure Name CRMT_BSP_IBASE_TREE_NF
I have added the field in CRMT_BSP_IBASE_TREE_NF and then to the field group IBA_TREE_NF_F4. Created a new field label name too.
When I execute the application, the field data is blank.
Can you please let me know how to fetch data and assign it to the field. I am new to CRM. Please explain in details
Thank you in advance
Sree

Hi
I have solved it.
Thanks
Edited by: Sree on May 5, 2010 8:23 AM

From an ItemRenderer, how can i reach the component that the Itemrenderer is applied on

Hello.
I have a component that uses a skin that uses several different item renderers.
in each item renderer i want to set a different background color according to a public variable that
the component that i apply the item render on has.
how can i reach that component from the ItemRenderer?
thanks!

Usually outerDocument or parentDocument.

Component allocation of phantom assembly

I have a phantom assembly "X" with its components as A, B, C, D. During component allocation in routing do I need to allocate Phantom Assembly "X" to an operation as well.
Please specify the reason for YES and NO?

Hi
Check the following:
Material components in a BOM that are not assigned to an operation in the routing are automatically assigned to the first operation when you create a production order.
If you have assigned a phantom assembly to an operation in a routing, the system automatically assigns all of the material components in the phantom assembly to the same operation as the phantom assembly when you create a production order.
If you have assigned individual material components from the phantom assembly to various operations without also allocating the phantom assembly, the system assigns the material components that have not been assigned and the phantom assembly to the beginning of the first operation when you create a production order.
Thanks

Directory listing for a directory within the webapplication

Hi,
I have a the code which does the directory listing of a given directory using its absolute path. eg new File("c:/webapp/tempdir");).
I want to do the directory listing by giving a path relative to the context path of the webapp like(new File("/temp");)
When I try to do
<%
File f1=new File("/tempDir");
f1.exists(); --> returns flase
%>
tempDir is a directory in my webapplication. How should I reference this? Should I have to use file:// or http://?
Looking forward for your help
Thanks in advance

There is a method in ServletContext: getRealPath.
http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/ServletContext.html
It turns a website relative path into a real location on disk.
// only need this line in a servlet. "application" is already defined in a jsp
ServletContext application = getServletConfig().getServletContext();
String filePath = application.getRealPath("/tempDir");
File f1 = new File(filePath);Some issues with using this approach:
If your application is in an unexploded WAR file, then getRealPath() can return null, as there isn't really a location on disk that it relates to.

Pull list for the component of the phantom assembly

Similar Messages

Maybe you are looking for