Pull out tray reset

I'd like to use a pull out tray for a navigation item. The user would slide out the tray, tap a button in the tray, and it would take them to another article or page.
The trouble is, once they navigate away from the first page, that tray remains in the "open" position. If they return to the first page, the tray is already open from the last time they were there.
Is there a way to make the tray snap "closed" (the original state) once they tap the button?

Make that first page a single article. All interactivity will reset when you go back to it.
You could also try to use an MSO instead and have the button navto and go to the closed state.
Bob

Similar Messages

  • Full page pull out tray, pull only object workaround

    Hi,
    Is there any way yet, when creating a pull out tray/slider using the scrollable frame, to only have a object within the container pull the content, rather then being able to pull from anywhere within the container?
    Basically what I am trying to do is have a pull out that when pulled out, covers the entire page, therefore the container needs to cover the entire page which disables the ability to navigate horizontally between articles, I can still navigate vertically, but not horizontally..
    Does anyone know of a workaround that would enable me to have a full page pull out (container) and still be able to navigate horizontally. i.e. having only an object (the pull tab) pull the content rather then anywhere within the container.
    Thanks for you help
    Quinn

    Thanks everyone for your help, however I am yet to solve this problem...
    On top of the horizontally scrolling content I have created a MSO consisting of two invisible rectangle frames. Tried to see if it would work as just a MSO, nothing, turned those into a one time Auto Play Slideshow, still nothing. No matter where I pull, the content still scrolls yet I can not navigate horizontally to the next article. (Made sure I left space for the tab area, yet I can still pull from anywhere). Any other solutions/workarounds to this problem? Or if this has worked for others, possibly tell me if I am doing something incorrectly?
    Thanks again for your help.
    Quinn
    PS. I am using V20 on ID 5.5

  • Multiple tabs,sliders or pull-out trays in DPS

    Hello!
    How can I have multiple pull-out tabs in DPS on the same page.
    My screen shots show the tabs on the right and then the last tab pulled out. But it seems that this tab stops all the functionality of the other tabs, i.e. they dont pull out.
    Has anyone got a bright idea for a dull day, to make the other tabs work?
    Thanks.

    Hi Bob,
    I seem to be having a similar problem. Could you be more specific about the MSO approach, please?
    Thank-you kindly.

  • HOW TO PULL OUT THE PAPER TRAY ON ENVY e4500

     I HAVE JUST BOUGHT  HP ENVY 4500 e ALL IN ONE, I AM HAVING TROUBLE FINDING OUT HOW TO PULL OUT THE PAPER TRAY.
    This question was solved.
    View Solution.

    To pull it out to load paper, you first flip down open the front door (which is connected to the paper tray and serves as the output tray), then grab on the door and pull.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Feed a single sheet of different paper into input feeder without pulling entire tray out ?

    With windows xp, is there a way to feed a single sheet of different paper into the input feeder on 8600 plus, without having to pull entire tray out each time?
    This question was solved.
    View Solution.

    HI,
    No this function is not supported on this unit, some laserjets for example haven a priority feed slot, but this printer does not.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Pull Out Sliders and Trays | Learn Digital Publishing Suite: Enterprise Edition | Adobe TV

    Create a scrolling frame that slides in and out of a page, revealing more information when the reader pulls on a tab. This is useful when you want to provide a little more information for your reader, but you don't want it to interrupt the full design of the page.Download Bob Bringhurst's Tips App to read a tutorial on scrolling frames: http://itunes.apple.com/us/app/digital-publishing-suite-tips/id436199090?mt =8
    http://adobe.ly/z7uh93

    Actually the original message was meant for Colin not Bob
    I did find the answer to my own question... The Video Is OUTDATED and should be removed to avoid future confusion.
    The new feature is "Scrollable Frame", located on the bottom of the Folio Overlay panel which allows for an effective slide out tray.
    Colin's more recent video covers this.
    http://tv.adobe.com/watch/learn-digital-publishing-suite-enterprise-edition/scrollable-fra mes-and-pan-zoom-v19/
    Colin if you do read this— thanks for producing some fantastic tutorials and being so supportive.

  • Pull out tab pan and zoom option grayed out

    I've been trying to follow this great tutorial about pull out tabs, but have one issue. I've just updated InDesign 5.5 Folio Builder to v.22 and the producer tools to the most recent release on August 7. Here is what I've been doing.
    Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text.
    Group all of them together.
    Create an image box (container frame) that is larger than my grouped content and paste the grouped content into it.
    When I select the image box (container frame) and select Pan and Zoom, all options are greyed out.
    If I clear the content from the image box and put a photo in it, I can use the Pan and Zoom options.
    Any ideas on what I'm doing incorrectly? Thanks!
    Tutorial I'm following.
    http://tv.adobe.com/watch/digital-publishing/pull-out-sliders-and-trays/

    Thanks, for the record, I updated my steps to show the correct process.
    Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text. Create an unassigned box at the top left to "hold" the tab position to the right side of your document.
    Group all of them together.
    Create an image box (container frame) that is larger than the grouped content and paste the grouped content into it.
    Select the image box (container frame) and choose Scrollable Frame with the options - Horizontal, check Hide for Scroll Indicators, and select Upper Left for Initial Content Position.
    Thanks again Bob!

  • Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older

    Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older wireless keyboard, and the same thing happened. It must not be the keyboard if it happened to two different keyboards. I have a habit of restarting my computer, when things don't work, I find it helps, and sure enough, everything works. Today, it happened again. Does anyone know what is causing this to happen?

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try reinstalling Yosemite with out losing stuff. See:
    OS X Yosemite: Reinstall OS X

  • My macbook pro has had a black screen and wont turn on after pulling out usb

    6 months ago i pulled a usb out of my usb port and my laptop switched off and didn't turn on for a week, and it's just happened again after pulling out a HTMI cord that was connected to my television? have i blown up my macbook? SOMEONE HELP

    Try resetting the SMC. Be sure to use the correct method for your computer.
    http://support.apple.com/kb/ht3964

  • Pulled out power cord. now notebook will not turn on.

    I just got it yesterday. worked fine. I panicked when i thought i did something wrong and pulled out the power cord *slaps self in face*. now it will not tun on. does anyone know what it wrong with it? is it the laptop or the power cord?

    Doughboy,
    Remove the main battery, connect the power adapter, then reset the power manager:
    http://docs.info.apple.com/article.html?artnum=14449

  • My I-Pad screen is black, I tried to sync and restore I-Pad, it showes the contents on the computer and pulling out pictures and other files, but screen is black. what can I do?

    My I-Pad screen is black!! I tried to sync and restore I-Pad, it showes the contents on the computer and pulling out pictures and other files, but screen is black. I don't know what happened! what can I do?

    I have this problem as well...however, resetting/restoring did not take place when I followed the same instructions but got nothing on the screen.  Thanks in advance.

  • New iphone - when it crashes? pulling out the sim

    Hi,
    Have a new iphone and am delighted (except for the lack of 3 g) however it crashed (only once). It held the sleep wake button, then i tried the reset combination. Eventually it worked after about 40-45 seconds.
    Because there is no option to pull out the battery (like my old Nokia N95 which never stopped crashing), I was wondering whether pulling out the sim might work to force a restart???
    It's not ideal, but the time the pone crashed was ultra mission critical and I needed the phone function real quick.
    thanks
    tom

    It's much quicker to put the phone in Airplane mode, and then turn it off, if all you want to do is to re-establish a connection to the cell tower. Taking the SIM card out and back in again, will effectively do the same thing, but takes longer; it won't reset/reboot the phone though - only pressing on the sleep and home buttons *until the Apple logo appears* will achieve this.
    Message was edited by: jia10

  • Blackberry 8530 Curve will not download new pictures without taking battery out and resetting.

    Recently my BB 8530 will not download a new picture taken without taking the battery out and resetting. What is causing this issue?  Thank you.

    Hi and welcome to the forums haibieb!
    A couple of places for you to visit: Blackberry 101     Tips & Tricks
    And is the pic stored once you do a battery pull?
    Where are you storing your camera picS?  Media card or device memory?  and
    What is the setting on your reserve pictures memory? You may be exceeding that limit especially if your file size is too large.
    Let us know.  Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Everytime i pull out my casing, My ipod touch 5G (32GB) just turn off like that. How do i fix it???

    Please Help Me

    Not knowing what yo mean by "pull out cas8ing", all I can suggest is:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Query to pull out Vendor details with AP invoice

    Hi all
    I have made the following query to pull out the following data
    House Bank Account, Customer/Vendor Name,Payment Method code,Default Account,Default Branch,Default bank Internal id,
    Document NUmber,Customer/Vendor Ref No,Row Total,Item/Service description,Branch,Street
    SELECT T0.[HousBnkAct], T1.[CardName], T0.[PymCode], T0.[DflAccount],T0.[DflBranch],  T0.[BankCtlKey], T1.[DocNum],T1.[NumAtCard],  T2.[LineTotal], T2.[Dscription], T3.[Branch], T3.[Street] FROM OCRD T0  INNER JOIN OPCH T1 ON T0.CardCode = T1.CardCode INNER JOIN PCH1 T2 ON T1.DocEntry = T2.DocEntry INNER JOIN DSC1 T3 ON T0.HousActKey = T3.AbsEntry WHERE T1.[DocDate] >=[%0] AND  T1.[DocDate] <=[%1] AND  T1.[DocStatus] = 'o' AND  T0.[PymCode] = 'EFT'
    But i have observed that i am not getting all the customers in this query where the invoice is open, it displays only few records.
    Regards
    Farheen

    Hi Farheen......
    Please try this........
    SELECT T0.HousBnkAct, T1.CardName, T0.PymCode, T0.DflAccount,
    T0.DflBranch, T0.BankCtlKey, T1.DocNum,T1.NumAtCard, T2.LineTotal, T2.Dscription,
    T3.Branch, T3.Street FROM OCRD T0 LEFT JOIN OPCH T1 ON T0.CardCode = T1.CardCode
    LEFT JOIN PCH1 T2 ON T1.DocEntry = T2.DocEntry LEFT JOIN DSC1 T3 ON
    T0.HousActKey = T3.AbsEntry WHERE T1.DocDate >='[%0]' AND T1.DocDate <='[%1]' AND T1.DocStatus = 'o' AND T0.PymCode = 'EFT'
    Regards,
    Rahul

Maybe you are looking for

  • Windows 8 and elements 11

    Last week I installed Windows 8, after that Photoshop Elements 11 quits every time after about half an hour. Is it a Windows issue or coincedence?

  • JGoodies Plastic L&F not working!

    Hi, I've written a program using Swing that has a JGoodies L&F. I'm working on a Windows XP computer, and I've been using UIManager.setLookAndFeel("com.jgoodies.looks.windows.WindowsLookAndFeel"); from the beginning. Now, however, I'm going to run it

  • Profiling RT Extreme... (Final Cut HD 4.5)

    Hey all... i'm new to the mac world...just got it a month ago. everything was good until.... i've intalled FCP4.5 it worked...and all the other software..like soundtrack, motion, comprssor and what not... now FCP won't start!!! FCP does boot up to a

  • Filters Section is not visible in Mobile App???

    I added few filters in my report in Power BI Preview Web but its not visible in Mobile App. Anybody has any idea?? Atul, 

  • How to control the force return in table cell data?

    I have some xml format files.When I import them into FrameMaker,They display as table data.but when the data is very long in table cell,I want to control the new line by myself.for example,I add some \r\n in my xml file data,then in FrameMaker,It can