Pull the PO from Work Flow
Hi,
Could you please help me on how to pull the PO from a workflow ?
I could access we20 to find the agent #.How do I see if the PO as item under that again and find what is the issue with that PO.
Appreciate you help on transactions,process.
Regards,
Rama
Hi
first you will got pftc_ins tcode then you will see trigger ever under this you can take object catogory, select your business object , before you have to create business object whatver PO item you have to assign to that business object that BO you will pull here.if you are not getting wht you did process write here then i will clear to you with screen shots.
Thanks
Naidu
Similar Messages
-
Need to pull the information from two facts and associated dimensions
HI All, i need to pull all the columns from the two Facts and their associated dimensions, get the results.
here is the example:
Fact1 --> D1, D2, D3
FACT2--> DA, DB, DC, D1
D1 Dimension has a Join with two fact tables, as long as i'm using columns from D1 and FACT2, DA, DB, DC report works.
but my requirement is to get the results when pulling the columns from all the dimensions and two facts like Fact1, FACT2, D1, D2, D3, DA, DB, DC
how to achieve this requirement, can someone pls help me with this.
your responses are much appreciated.
Thanks
rarHi RAR,
I assume you have created proper dimensional hierarchies for all the dimensions in your subject area. Also, ensure that all of them have a Total Level created.
Assuming the above, since D1 is a conformed dimension, if you create a report having columns from only D1,Fact1 and Fact2, the report should show you proper results.
For creating a report having columns from all tables, ensure the following:
1. For all measure columns from Fact1 to be included in the report, set them to be calculated at the Total Level of dimensions DA, DB and DC
2. For all measure columns from Fact2 to be included in the report, set them to be calculated at the Total Level of dimensions D2 and D3
The physical sql will fire separate queries for the 2 star schemas and then join them using the conformed dimension.
Hope this helps,
Gaurav -
How we will pull the data from Sap-Bi to sap-Bpc
Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AMTough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection... -
How to see work flow log from Work flow number & work item?
Hi SDN,
How to see work flow log from Work flow number & work item?
Please let me know if there is any transaction for this?
Or there is any table which gives the details of Work items & work flow numbers?
Regards,
Rahul
Edited by: Rahul Wagh on Nov 12, 2008 5:56 PMHi Rahul
Go to the Transaction SWI1,
Enter the workitem no and press F8.
Select the required entry and Press Shift+F8 (Log Button)
to view the workflow log.
Best Regards,
Deepa Kulkarni -
Will be possible to extract data from work flow?
hi
i need to add approver in FIAP report. the filed is available not any table like, its getting from abap work flow? please let me know normally will be possible to extract data from work flow?Hi,
There is no direct method i am aware of, but you can definitely create custom extractors on base tables.
-Vikram -
Pull the data from database.
Hi EveryBody,
I have a requirement in universe if the end user will select the date from (1/8/14 to 10/8/14) then pull the data from the database. but when the end user select the data more than 10 days(e.g 1/8/14 to 15/8/14 etc...) then no need to pull the data from database.
how will write the filter in the universe?
how will achieve this? please help me.
Thank you.Hi ,
I am assuming you are giving prompt for start date and end date respectively start_date and end_date.
please see the below work around. (below is pseudo code)
1. create one dummy objects as
case when @prompt(end_date) - @prompt(start_date) <= 10 then = 1 end
Remember text used in dummy object should be same as you use it for you date prompts
2. pull this objects in where clause along with your date prompts as
dummy_object = 1
It will work as below :=
your report will be prompted for start_date and end_date .
Same values will be passed to dummy objects.
When dummy object will be executed , it will check for end_date-start_date <=10 or not.
If it is less then 10 then query will executed else it will come out as where clause is not satisfied.
Hope this answers your question :-).
Regards
Jeevan -
URL for BSP from Work flow(Portal)
Hi .,
Please let me know how we can pass a URL for BSP from Email . Which would be initiated from Work flow(portal) .
thanks
Sreenivas reddyHi,
I hope the below links will help you.
How to open BSP page when clicking a URL from E-mail.
Navigating to a BSP (URL) from PCUI
Thanks,
Khushboo. -
Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?
If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability -
Folder mapping with Unix XI box / XI is not pulling the file from folder
We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex -
I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano. How do pull the songs from my ipod back onto my computer? I have over 200 songs. There is no way I can re-purchase them! Any help?
How to use your iPod to move your music to a new computer
-
Pull the data from legacy System into report and display with SAP data
Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.Steps:-
Define the file path on selection screen:-
Selection screen data
select-options (s_)
parameters (p_)
radio buttons (r_)
checkboxes (x_)
pushbuttons (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter: p_file type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
exporting
filename = l_fname
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = lt_data
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
if sy-subrc <> 0.
message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want. -
Any Func Module to pull the value from DD07T ?
Hi Experts,
In my system, we hv a Z domain and 100 values are supplied in VALUE RANGE for it.
So, I need to pull the short description(DDTEXT) of these fixed values, so, the tbl is DD07T, fine, but the issue is that, the field DOMVALUE_L(which I can supply apart from DOMNAME)..........I can pull it by a SELECT........but this filed is DOMVALUE_L not a KEY FILED so, so, SELECT takes much time.........so, let me know that Is there any Func module to pull the values from this tbl DD07T?
thanqif you have all the Zdomains in one structure you can use the
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = gd_repid
i_internal_tabname = 'I_ZSCHED'
i_structure_name = 'Z_ALV' "><<<<<<<<<<<< structure name
i_client_never_display = 'X'
i_inclname = gd_repid
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
you can read the field catalog and get the values.. -
Hi Guru's,
I would like to know ,How to pull the Data from Oracle tables to BW.
tell me scratch onwards...
regards
sekhar chHi...
In the admin workbench open the modeling tab and select Source Systems
In the right pane, right-click on Source Systems and select Create
A dialog requires you to define the type of source system. Select Database System
Enter a description for the source system
Once you accept the definition of the source system, you have to provide the following information, save and back out:
DBMS: ORA (Oracle)
User Name: Your UID
DB password: Your pwd
Conn. Info: sql*net string
Select Permanent connection if this is the case
If everything went well, you should see the new source system. When you do a right-click and ask for the DataSource overview, the first time you execute it you will be prompted to generate the application hierarchy
In order to test connectivity, right-click on the source system and select Select Database Tables
The following screen shows up. Click on the execute button
any tables or views that you have access through your UID
Select a table or view and click on Edit DataSource
To test data retrieval, click on Display table contents
Designate the application component, determine the type of DataSource (Text, Master data, or Transaction data) then generate the DataSource
with regards,
hari -
Microsoft Tech Gurus,
Can you please assist on this issue. ? There are 3 different errors stacks for this issue - Our Application is not connecting with MS SQL Server. Everything was fine until Monday. There are changes have done on those Apps and DB servers.
Please refer the attached document - which has all the errors with details. Appreciate all your support.!
Error 1 :
TISAppenderLog4net.Log4NetException: The underlying provider failed on Open. ---> System.Data.EntityException: The underlying provider failed on Open. ---> System.Transactions.TransactionManagerCommunicationException:
Communication with the underlying transaction manager has failed. ---> System.Runtime.InteropServices.COMException: The MSDTC transaction manager was unable to pull the transaction from the source transaction manager due to communication problems. Possible
causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers. (Exception
from HRESULT: 0x8004D02B)
Error 2 :
TISAppenderLog4net.Log4NetException: Installation of the application [TestApp] failed ---> TiS.Core.TisCommon.TisException: Installation of the application [TestApp] failed
Error 3 :
TISAppenderLog4net.Log4NetException: Cannot open database "TestApp_Workflow" requested by the login. The login failed.
Login failed for user 'eflow_user'. ---> System.Data.SqlClient.SqlException: Cannot open database "TestApp_Workflow" requested by the login. The login failed.
Login failed for user 'eflow_user' at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1
wrapCloseInAction)Error 1:-
http://blogashwani.blogspot.in/2013/05/dtc-issue-can-not-find-each-other-by.html
It seemed like a case when (sometimes) machines were not able to locate each other.
The solution was simple (as suggested on forums available on the internet)- make identification easier :).
Either access the machines using IP instead of their names or make a mapping entry in the "hosts" file located at "C:\windows\system32\drivers\etc".
We took the "hosts" file approach and there were no errors once we made the changes.
Error 3 :
Try login from mssql using that account check it verifed
Distributed Transaction Coordinator restart and check. -
Can i send mail to yahoo from work flow
can i send mail to yahoo from work flow if it is possible how do i do that ? is this program enough if yes how do i do that ? do i need to write or change any coding
Hi Neo ,
You can use Function module 'SO_OBJECT_SEND' from your BO Method.
For this Function module to work Email configuration should be done for
external addresses..Please check with your Basis team for necessary config.
Thank you
Srinivas
Maybe you are looking for
-
How can I get a view of what's not in any smart mailbox?
I want to see basically my inbox, only with all of the things being displayed in my smart mailboxes HIDDEN. I don't see an option for this. I tried creating a smart inbox, but there's no way to create the inverse of my smart mailboxes because the rul
-
Problem with Photoshop CS 6 install
I have a CS6 academic license. I installed it on my laptop without difficulty. But when i installed it on the MacPro I got two error messages "Could not load actions because an unexpected end-of-file was encountered" and "could not initialize Photos
-
Font appearance jumping between light and bold
When I first open thunderbird in the morning, fonts appear bold [as if all unread] then if i quit thunderbird and try again it open with font as light, with only unread email showing as bold. OS X Yosemite 10.10.3 Thunderbird 31.6.0 UTC/S 5.0.0 This
-
How to free up storage in lumia
I have purchased Lumia 525 3 weeks ago its first time me using wp 8 os well the phone is great but now its storage is getting low even i have uninstalled all apps and games i want to install modern combat or nova but its not installing its telling me
-
I have a firend that gave me her TouchPad. She has no instructions for me. I have reset it, but now I get a network error message. I don't know what to do to take her information off and load new apps and my new accounts on the touchpad. Any sugge