Pulled motherboard to replace trackpad, now have no Bluetooth or Wifi...
Not sure what to check. Suggestions?
I fixed it!!! I found out that the camera cable from the display also connects the wifi and bt boards. I fired up the unit and checked the camera. No camera input. I didn't have it seated correctly on the board.
All is good!
Yay!
Similar Messages
-
L755 Replaced Harddive now have no drivers help please!!!
I just replaced the drive only a little over a yer and it went bad Put windows 7 in but now it doesnt recognize my ethernet, wireless adapter I have no drivers I have tried downloading from the drivers list I think it was a realtek but it did not work I wnet to order the recovery cd from the website but when I put my serial number in it says I should get the L655 recovery cd but on the back of my laptop its say L755 any have any help for this?
Can you send me a PM with your model, model-part, and serial numbers? Click here to send me a Private Message.
- Peter -
Recieved replacement phone, now have a question.
Fedex dropped off my phone today while I was at work. I just got home and unpacked the box. I realized that the prepaid shipping says overnight and has a delivery date of tomorrow (for the loaner phone). Since it's almost 6:30 here and I live miles from any fedex store, does that mean if I don't ship it off tonight my card will get charged for the phone?
Is there a number I can call to verify if I will get charged or not. I tried calling a local Apple store but the phone menu's are worthless for my situation. Please help
thanks,Hey Tyler,
This page has service iPhone rental agreement.
http://www.apple.com/legal/terms/iphonerental.html
You can contact AppleCare Support at 1800-My-iPhone.
Jason -
I cannot access Bluetooth or wifi after updating my iPhone software to iOS 7 on my iPhone 4S
Same here--I cannot connect to my home wifi--and there's no option to re-enter my password/WEP--it just says "can't connect"....so far I've tried turning wifi on and off on my devices (iPhone 4s and iPAD 2nd gen), no avail. I tried re-setting up the network, no luck.
HELLLLP -
I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?
When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives. If that info is true, the question is, do you have a compatible combination of logic board and hard drive?
-
my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod
Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991 -
i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.
I would try contacting Apple.
http://www.apple.com/support/ipodtouch/contact/ -
My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?
1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well. -
My iphone 4 was stolen and I now have a replacement. Luckily my music was stored on an external hard drive and when I transferred it to itunes it came up as previous library. I've been trying to sync it to my new phone but it's not working. All my apps etc have synced but the music won't. What can I do?
Click: Restoring your iTunes Library backup (from an external drive) here > iTunes: Back up your iTunes library by copying to an external hard drive
BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)
Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton -
My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Please help…Thanks!!
Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
I have just had my hard drive replaced and now I can.t find Air Port to get wi fi
I have just had my hard drive replaced and now I can't find Air Port for my wi fi
Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service. Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
Hope this helps -
Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!
You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/ -
Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.
Reinstall them from your original install disks or your backup.
-
I have purchased my iphone in uae and now i m in india and my iphone hardware buttons are unreactive and i have to service or replace but i have lost my bill and on net there exist all info of my purchase can i service it in india without the bill
If you purchased in the UAE then it must be returned to the seller in the UAE for repair or service under warranty
NO Authorised servicer in India will touch it as it did not originate in India
If you purchased in an UNauthorised seller in UAE then you will have to find out where it came from for any warranty support
Maybe you are looking for
-
Reporting Services in both SharePoint 2013 connected and native mode?
Is it possible to configure Reporting Services (SQL Server 2014) to support both SharePoint 2013 connected mode and local Report Server in native mode on the same server using multiple instances of RS? The reason for this setup is to avoid having to
-
Dear All, How to set the under and over delivery tolerances for MIGO. When we create the GR wrt to PO how w can set the tolerance limits for stock and non-stock and free text items. Please advise
-
Process order, no goods receipt without goods issue.
Dear Experts, My client does auto and manual goods receipt for process order. He wants GR not to happen auto or manually till GI is not being done. I tried by user status but, user status was not changing automatically as system status. Secondly is t
-
Pcmanfm can't set programs for file types
I would like set a gpicview for jpg files, but when I set this program in pcmanfm menu - pcmanfm doesn't open jpg with gpicview... after installing thunar - I set gpicview for jpg in thunar and now pcmanfm is opening jpg with gpicview... How change t
-
RP_provide_from_last selecting wrong value ???
Hi experts.. In my report i had used statement .. RP_provide_from_last P0027 SPACE PN-BEGDA PN-ENDA... Now on selction secreen i am giving any random pernr no. 5656 along with begda-->01011800 enda--->31129999 Although there no such data peresent for