Pulled the trigger on a X220
Well, I am gonna say goodbye to my X120e soon, as I found some good savings codes and ordered a X220 with IPS screen, i7, BT, the Centrino 6205 wifi, camera. Gonna upgrade the ram myself and gonna try to see if I can stuff my Vertex2 SSD in it. If not I will wait a bit and get an Intel one when they come out wiht 7mm ones better than the 320 series.
The X120e was my first Thinkpad in many years (I had a T21 for about 5 years 10 years ago. Its been plagued with too many issues, and while the X220 is not without some issues too, I think they will be addressed faster than the low cost X120e. Also looking forward to much better performance with a "real cpu".
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |
Hello,
As an X120e owner, I would be interested in your thoughts on how the X220 compares to it.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Thoughts before I pull the trigger and buy this computer build?
Hi guys,
Before I pull the trigger, I would like some thoughts on this build. I'm going to get a few SSD drives on top of this list, but I am not listing them here, as I'm just trying to show the main components I'm after. Using for Adobe and Blender 3D (movie editing rig, vfx, etc...)
$150 COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP Steel Computer Case
$70 Noctua NH-U14S 140x150x25 ( NF-A15 PWM) SSO2-Bearing ( Self-stabilising oil-presure bearing ) CPU Cooler Item #:N82E16835608041
$660 G.SKILL Ripjaws 4 series 32GB (8 x 4GB) 288-Pin DDR4 SDRAM DDR4 2800 (PC4-22400) Desktop Memory
$140 Microsoft Windows 7 Professional SP1 64-bit
$390 Intel Core i7-5820K 3.3GHz LGA 2011-v3 Desktop Processor
$200 EVGA SuperNOVA 1000 P2 220-P2-1000-XR 1000W Power Supply
$285 ASRock Fatal1ty X99X Killer ATX Intel Motherboard
$700 for two GTX 970 video cards
1) Is anything overkill?
2) Is anything underkill?
3) Any incompatible things I've researched?
4) Anything I've missed?
5) 32gb 2800mhz ram is about the same as 16gb 3200mhz ram, what to pick?
Thanks!
Mr D1) Is anything overkill? yes, get a single GTX 980 instead of the dual 970's
See my above reply. Let me know if you think i'm still in "overkill", seeing what I've been told on Blender forums are contrary.
2) Is anything underkill? yes, go with a 6 or 8-core for a Premiere Pro x99 build; if that is too expensive, get a earlier gen x79 6-core with much less $$$ DDR3 memory
The processor is a 6 core, is it not? Did I show you the wrong one? Let me know!
3) Any incompatible things I've researched? nope, you're good there
4) Anything I've missed? DVD or Blu-ray burner?
I have a Blu ray drive already.
5) 32gb 2800mhz ram is about the same as 16gb 3200mhz ram, what to pick? Definitely go with 32GB; this will help lots more than speed
Sounds good!
Thanks! -
Have Tiger, but lots of old apps... should I pull the trigger?
Yes, I know this is a popular question, but every situation is different and I haven't seen a definitive answer after browsing the forums for a while.
I have the following hardware:
800MHz 17" flat-panel iMac
800MHz iBook
...and the following apps, none of which I can afford to upgrade:
Final Cut Pro 4
Premiere 6.5
Illustrator 10
Photoshop 7
DVD Studio Pro 1.5
Lightwave 7
Cubase SX
Logic Express 7
Flash MX
Office X
ProTools FREE (v5 - OS9 only)
...and probably a couple others I've forgotten.
I was given the retail box of 10.4, and the temptation is SO strong to install it. My two Macs were bought at times when I had an unusual amount of cash, so in the future, I think my limited budget means that the only new Macs I'll have will be Intel machines of er, let's just say an un-conventional nature. I also can't afford to upgrade the apps, although I do have Soundtrack Pro and DVD Studio Pro 3, although I still plan to use 1.5 most of the time. I may also be able to use Photoshop CS2, but sticking with 7 would be fine.
My biggest problem is with FCP4. I've heard that QT 7 really causes problems, not the least of which is no QT Export to MPEG-2. I of course have Compressor, but get the constant "unable to connect to background process" error, so I rely on QT Export to create .m2v files for DVDs. I guess it's possible that Compressor will magically work in Tiger, but I fear letting go of QT Export. I also dread paying for a new MPEG-2 Playback Component and/or QT Pro license.
I wish I could cross-post this into the FCP and DVDSPro forums, but hopefully enough people here will be able to tell me whether I'm better off not upgrading unless I can get new versions of the apps.
My application for the iMac is audio/video production, and even though it's done well up to now on the stock 256MB, I'll be upgrading the ram soon to the max of 768MB (that's the max without opening up the case, which I'm hesitant to do). I also would like to use the iBook for some field work, and given its 30GB hard drive, I don't see partitioning as an option. On the up side, the iBook does have the absolute maximum of 1.125GB of RAM.
I would of course use an external drive for content on both machines, but at least with the iMac there's an 80GB hard drive that can be partitioned and still have ample room. I currently have most of it assigned to Jaguar, and a 10GB partition for Panther. If I went that route again, the Panther partition would have to be larger than 10GB because most of the apps would be installed under Panther. I guess another issue is whether Tiger and Panther partitions would play nice. Right now I can launch applications that reside in the Panther partition even if I booted into Jaguar and vice-versa, but I wonder if that would confuse Tiger.
Anyway, thanks in advance for any advice.I apologize for the tone of my previous post, but it's so frustrating to post a question and have so many people "miss the barn" in their answers. Funnily enough, you actually have a very similar collection of machines to me... I have the 17" FP iMac, the iBook G4, and also a B&W G3 in the bedroom that my fiancee and I use for web surfing. I tried posting in the FCP and DVDSPro forums since those are the most important apps to run, but not much response.
What I ended up doing was creating two equal partitions on the iMac (~37GB each), one for Jaguar and one for Tiger. I actually like working in Jaguar for daily computing tasks, so I'll be installing my older apps there. My recording interface won't work under Jaguar, so my audio apps and all newer software (Soundtrack Pro, Adobe CS2, etc.) will be installed on the Tiger partition. I have no love for Panther, so I've stopped using it completely.
I'm sure switching between the partitions will be somewhat of a pain, but the option-key startup menu should make it easier. As I mentioned earlier, when I got Panther I only made a partition for it rather than upgrading, even though my apps would still run. I just didn't like the metallic look. Apple had started adding brushed aluminum in their hardware, but the Aqua interface seemed to go better with the older "iLamp". It's funny though, I really like the look of Tiger on it, maybe in part because they went back to a blue Apple Menu logo. It also seems quite snappy, although the first few boots on my iBook were painfully slow.
I haven't bothered to upgrade the OS on the B&W... can you really get it up to Tiger? It does have built-in Firewire, but I thought the minimum clock speed was something like 700MHz. It doesn't have tons of RAM either, so I'm probably better off not trying to upgrade. It seems to have a Rev. A motherboard, so it crashes once in a while, not very often though. Also, the Firewire is either disabled or fried, because I've tried an iBot webcam and it couldn't even see it. I'd hazard a guess that the reason the B&W might seem snappier is because the OS knows it's on an older machine and turns off a lot of CPU-draining eye candy that you may not notice (font smoothing, shadow effects, etc.) so it looks about the same but runs faster. Whenever I'd run OS 9 on my iMac it seemed like a screaming little machine compared to the previous Macs I had, but not so much with OS X.
Well, thanks for trying. I kind of figured this out myself, but I would have thought that someone here would have had the same experience as myself and could offer some advice. Seems most of the posts here are about upgrading to Leopard, so I guess I'm a bit behind the curve. For now, it's kind of comforting that I can't (officially) go beyond 10.4.11, since it makes the decision for me. Of course once an app comes along that only runs under Leopard, that sick feeling of being obsolete will probably come back. -
Pulling the trigger on a new Mac Pro. Advice please.
Okay, here we go. I am a freelancer who shoots in 1080i and 720p using a JVC 700 U camera with really good glass. in a small market. So bringing the media in is a piece of cake. I do not see me going to 2K or 4k anytime soon. I produce a weekly hour long sports program and various other projects... training, docs, marketing videos, etc. Very seldom more than 4 streams on the timeline. I have a budget of around $5,000 for a new machine. Here is what I am leaning towards. I would appreciate any advice.
6 core, 32 GB ram, upgrade to D700 GPU's, 512 GB storage. I use two G-Tech 4TB Thunderbolt drives for media. I also have a Thunderbolt display. Any concerns or thoughts? You folks always have great advice so I am looking forward to your opinions.
Cheers,
TomThomas, Just a sugestion…why not also post this in the MP forum, where the emphasis is more on hardware. Not that you might not get some greatanswers here…more to diversify. ((I'd give an opinion if I were more up to speed with the MP…)
Russ -
Ok..pulled the trigger and bought it...now an import problem
I can't seem to import my video files which are MTS files from a Panasonic TM900 camera. What I did was create a folder on my desktop of the videos. As someone on the boards mentioned, I tried the Import from Archive suggestion - I get an error message stating none of the files can be imported. Anyone else with a Panasonic TM900 or other .MTS file users with other suggestions?
Thanks.
Steve
P.S. - I also just did the FCP X update and tried it before and after with same results.Hi Tom - new to this camera but here is a screen shot of a folder with the clips - I believe this is the metadata folder but if I need to get ClipWrap, I will.
-
Pulling the trigger on a $200 synth...
Some of you have given me great advice in another post with regard to helping me narrow down some options for addtional software instruments for Logic. So it's come down to 4 options for a synth:
BLUE, Albino, Zebra, or the Cameleon 5000.
They're all $199. i've reviewed the demos for all but the BLUE and they all seem pretty well rounded but I can only do 1 for the time being. Based on the options above is there any clear standout for those of you familiar with these synths?
Thanks again for your time.Happy New Year.
This always comes up on loads of forums. IMHO Zebra 2 sounds the best and is very flexible with a good set of presets but it is the most difficult to learn to program, especially for a newcomer. Blue is the next best with good presets (of course) and is also flexible. Albino is good too, mainly good presets and very easy to program. Cameleon has a more narrow application and the presets are not as comprehensive as the others - it is also more difficult to program.
If you know nothing about programming, don't care about learning and only want presets, go for Blue or Albino. If you want the best sounding synth (with superb support I have to say) and want a flexible, modular programming environment, go for Zebra 2. I'd avoid Cameleon until you want it to broaden your sound pallet.
Knowing nothing about you or your objectives, I'd say go for Zebra 2
I think the above is the general consensus from most forums. I own and use all of them BTW.
HTH.
D.
Mac OS X (10.4.8) -
About to pull the trigger but need memory help
I am about to order my Mac Pro but before I do I want to know what the fastest memory configuration is that I can get
I'm going to order the 2.66GHz machine with the ATI 4870 and 1TB Hard Drive. I edit HD video in Motion and Final Cut Pro on a daily basis. Is it worth upgrading to the 2.93GHz?memory: buy in multiples of 3 (three - 3, 6, 12 , etc
worth/: simply if you have a business workflow need where yo are deploying .apps for transcoding (with certain .apps) , rendering (with some .apps) and creative work then the top of the line machine is where you need to go.
What business are you in and does you business need this machine to increase the efficiency and profitability of your business.
THere are other ways to spend you money with APPLE that may meet and exceed your business requirements that don't involve a huge outlay for the top of the line machine .. have you looked that these at all?
dont be concerned wi the tech suff. Sure u can have the top of the line MAC PRO (as I have ordered) and fast is one hing but does it make your workflows more efficient..???
SImply look at it like this: if you need it get it else get what will satisfy your *business workflow*.
My 2.93Ghz 8 x core arrives in 3 days form apple with ATI4870 and 12GB.
remember its just one of the tools in the machine shop
w -
Any Words of Advice for G5 iMac 20in iSight Owner B4 I Pull the Trigger?
Got my copy Friday and installed it on my MacBook this morning. No issues whatsoever. The MacBook is my traveling machine, but my iMac G5 (and to a lesser extent, my PowerBook G4) are where I keep everything I hold dear. I have this funny feeling about putting it on the non-Intel machines. I've done a little homework this afternoon, and see that it's probably a good idea to repair permissions and reformat the hard drive. I have plenty of external drives and will, of course, do a complete backup for disaster recovery. Doing a clean install will be a time consuming pain in the ***, but also a good opportunity to clean up years worth of junk that's accumulated on the G5.
My Intel MacBook is running well - nice and fast. I'm a little concerned about speed on the G5 (2gb ram) though, and starting to wonder if maybe I should hold off, and just stick with Tiger? Has anyone installed on the iMac G5 20in iSight and had any problems or speed issues I should consider before upgrading?Hello William,
A backup before upgrading is always good.
I have installed on a G5 1.8 MHz without much problems. The keychain gave me some troubles. Renaming. Opening and naming back again solved the problem.
The speed of Leopard is improved so there is no reason to hold off an upgrade for this reason. Things I dislike are the stack which ruined the quick opening of applications. The stack is pretty worthless in my opinion. The other thing I dislike is the grainy font smoothing. It is really much worse compared to Tiger.
There are also things to like however. Speed is one of them.
I did not bother to do a clean install. As a matter of fact I use the same system since 10.1 without clean install and never had any issues. I transfered the system with everything on it from a G4 which I started out with.
Make a backup and start an upgrade install to enjoy Leopard. If you think anything needs "clean" installed you can always do that afterwards. -
Discover Mailer, pull the trigger?
So about 4 months back I applied for a few cards as I was rebuilding. One was Discover IT. I was denied for mainly my baddies which are almost 6 years old now. I have two CC baddies. One paid and one not paid. They should fall off next year.
Since beginning to rebuild about 5 months ago I've been approved for the Amazon Chase, Cap one Quicksilver and an Amazon Store card. I think I have around 3-4 INQs from app spree about 5 months ago.
I received a mailer from Discover recently. It has the small APR range and 0% first 12 months so it actually seems like a real pre qual. Should I go for it? My newer cards are always PIF and current utilization is about 9% total.
I want the CSP in the next 12 months. Do you think apping for the Discover IT would impact my chances of the CSP? Scores should be in sig but if not I'm 685+ EQ and EXP. 713 TU.Is your "pre-qual' letter actual an invitation to apply, with an invitation code? And does it also promote the first year double cash back? My anecdotal experience is that perhaps you should wait a short while and see if you get another invitation. I app'd for Discover last Oct and was denied flat out, the rejection letter only mentioned my 2010 BK7. Then in June I received an invitation lett w/code and I was "Yeah right, I'm not wasting another HP for you to turn me down again", But then more came every week, Mondays on the dot. When I received the 3rd one my thinking changed to "Well, maybe they really do want me", and after a few days mulling it over I applied and was was approved w/ $4k SL. So, I suggest you wait and see if they send you another.
-
Hi,
Could you please help me on how to pull the PO from a workflow ?
I could access we20 to find the agent #.How do I see if the PO as item under that again and find what is the issue with that PO.
Appreciate you help on transactions,process.
Regards,
RamaHi
first you will got pftc_ins tcode then you will see trigger ever under this you can take object catogory, select your business object , before you have to create business object whatver PO item you have to assign to that business object that BO you will pull here.if you are not getting wht you did process write here then i will clear to you with screen shots.
Thanks
Naidu -
Hi All,
Could you please let me know "pull" the xml file from URL through SOAP adaptor. I have used only Sender SAOP adaptor. Here I need to use pull data and send it to R3 system. I am bit confuse how I can trigger the receiver SOAP adaptor and sending data to R3 system.
my requirement is SOAP(HTTP)Receiver-R3 sytem (Receiver)
Could you plese share some toughts how i can do this.
thanks,
VenkatHi Venkat,
Pulling using SOAP protocol in SOAP adapter is not possible.. check the AXIS functionality of SOAP sender Adapter. For this please search SDN and you will get many hints
Regards
Suraj -
Hi everybody,
I need to make a LabView programmable trigger via TTL signal. The TTL signal should by default be high-active 1 kOhm pull down. When not switched on, the trigger input must be held at 5V, using a 1 kOhm resistance.
I have already a NI USB-6501 device, but if I understand well, this cannot be used for this purpose, can it? What else could I use? Would a NI USB-6509 do?
Many thanks.minni wrote:
Hi crossrulz,
I'll try to be clearer. What I meant was: I need to trigger a device.
- To keep the device inactive one of its inputs must be held at 5V,
- To swtich it on, I need to pull this input down to 0V.
Can I use a single output line of the NI USB 6501 to do this?
Thanks again.
Yes you can. A digital output will drive 5V or sink down to 0V.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?
If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability -
How to get the table name in the trigger definition without hard coding.
CREATE TRIGGER db.mytablename
AFTER UPDATE,INSERT
AS
INSERT INTO table1(col1)
SELECT InsRec.col1
FROM
INSERTED Ins
--Below i am calling one sp for which i have to pass the table name
EXEC myspname 'tablename'
In the above trigger,presently i am hard coding the tablename
but is it possible to get the table name dynamically on which the trigger is defined in order to avoid hard coding the table nameI really liked your audit table concept. You inspired me to modify it so that, the entire recordset gets captured and added a couple of other fields. Wanted to share my end result.
USE [YourDB]
GO
/****** Object: Trigger [dbo].[iudt_AutoAuditChanges] Script Date: 10/18/2013 12:49:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[iudt_AutoAuditChanges]
ON [dbo].[YourTable]
AFTER INSERT,DELETE,UPDATE
AS
BEGIN
SET NOCOUNT ON;
Declare @v_AuditID bigint
IF OBJECT_ID('dbo.AutoAudit','U') IS NULL BEGIN
CREATE TABLE [dbo].[AutoAudit]
( [AuditID] bigint identity,
[AuditDate] DateTime,
[AuditUserName] varchar(128),
[TableName] varchar(128) NULL,
[OldContent] XML NULL,
[NewContent] XML NULL
ALTER TABLE dbo.AutoAudit ADD CONSTRAINT
PK_AutoAudit PRIMARY KEY CLUSTERED
[AuditID]
) WITH( STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
CREATE NONCLUSTERED INDEX [idx_AutoAudit_TableName_AuditDate] ON [dbo].[AutoAudit]
( [TableName] ASC,
[AuditDate] ASC
)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
END
Select * Into #AuditDeleted from deleted
Select * Into #AuditInserted from inserted
While (Select COUNT(*) from #AuditDeleted) > 0 OR (Select COUNT(*) from #AuditInserted) > 0
Begin
INSERT INTO [dbo].[AutoAudit]
( [AuditDate], [AuditUserName], [TableName], [OldContent], [NewContent])
SELECT
GETDATE(),
SUSER_NAME(),
[TableName]=object_name([parent_obj]),
[OldContent]=CAST((SELECT TOP 1 * FROM #AuditDeleted D FOR XML RAW) AS XML),
[NewContent]=CAST((SELECT TOP 1 * FROM #AuditInserted I FOR XML RAW) AS XML)
FROM sysobjects
WHERE
[xtype] = 'tr'
and [name] = OBJECT_NAME(@@PROCID)
Set @v_AuditID = SCOPE_IDENTITY()
Delete from AutoAudit
Where AuditID = @v_AuditID
AND Convert(varchar(max),oldContent) = Convert(varchar(max),NewContent)
Delete top(1) from #AuditDeleted
Delete top(1) from #AuditInserted
End
END -
Folder mapping with Unix XI box / XI is not pulling the file from folder
We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex
Maybe you are looking for
-
Cannot open document because Office keeps trying to sign in to Office 365 with the wrong account
Problem: I cannot open Office documents from SharePoint on Office 365 because Office tries to sign in with my Microsoft account instead of my Office 365-account. History When we started the project, I did not have an Office 365-account yet for the or
-
Windows 8,1 bluetooth not working for HP pavillion 15
Hi.....Recently upgraded to windows 8.1 and since then no bluetooth being detected in device manager. please help. This question was solved. View Solution.
-
Problem installing Windows 7 64bit using bootcamp
Hello all, I am sorry to ask a question that has probably been asked many time. It almost three days that I am browsing all possible forum but I have not been able to find the solution to this particular problem. I am trying to install Windows 7 Ulti
-
How to change path of Users Terminal Services Profile for multiple AD users on server 2003?
Hello experts. I am working on a file server migration. All data has been migrated, I am currently working on redirecting users to the new file server. I am able to select multiple users at once in ADUC -> right-click -> properties -> profile and her
-
How Do I Sort Events by Event File Name?
Hi All, Searched the forums extensively and can't seem to find anything on point. I'm trying to sort my events in iMovie appropriately and it's a challenge. Some of my events are recent, imported digital videos. Others are old VHS videos from the 80s