Pulling Blue screen without losing shadow details

Hi every body
I have a blue screen I am working to pull it out, but the Problem is that the shadow of the actor is pulling out also.
Any Help to solve this problem.
I don’t won’t to lose the shadow details when I am pulling blue or Green screen.
  Mac OS X (10.4.10)  

Hi all again,
Finally I have found the solution to my problem. Thanks to this post http://macosx.com/forums/archive/t-234687.html
I solved the blue screen issue.
My solution was to delete all ATI RADEON, Rage 128GA and Rage Pro driver out of root/system/library/extensions. I only left the ATIRage128.kext and ATIRage128DVDDriver.bundle
Before I did that I updated to ATI Displays 4.5.7.
Now the Powerbook starts up properly and I have all display modes with and without external monitor available.
The "ASIC hang log" message in the Console system log gave me the right direction.
When you google "ASIC hang log", you will find many posts about Macs and other machines equipped with ATI graphics chips having freeze or blue screen trouble.
According to some posts Apple Service cannot solve this problem and most people´s diagnosis leads towards a hardware failure. Before you get a new logic board or graphics card check your ATI system extension! Keep your MAC smiling.

Similar Messages

  • How to exit iP5s blue screen without PC/Mac ?

    How to exit iP5s blue screen without PC/Mac ?

    Hi,
      Did you create a new GUI status and used SET PF-STATUS to display it...
      Or if you are using standard status..in which event are you capturing the value entered in the INPUT box..
    Thanks,
    Naren

  • Blue screen without login options?

    I've had this MacBook Pro for at least 5 years now. Despite a few hiccups, it has continued to fare well. I've also had it checked out, hard drive erased and reinstalled, etc., many years back when it leapt off a high desk and dented itself on the hardwood floor.
    Recently, it's been working fine. No issues. However, this past week it included a "Guest" login with sharing privileges, which made me doubt its security. I limited access for the guest account by choosing "No access" and it continued to work fine, login okay, etc. I realize the guest account with sharing privileges may have been there due to the machine being networked to one other computer in the house to attain wifi access.
    Anyway, today, as I started it up to log on, it launched a blue screen and went no further. I held its power button down to restart it and, when restarted, was again met with a blue screen and without the login screen i usually see.
    Does this mean it's dead, deeply troubled, or is it something to do with the change I made to that mysterious guest account - despite never seeing the guest account at login screen before?
    Hoping this is not the end of the road for it. Help!
    Thanks - any info extremely appreciated.

    Still stuck. I've now followed instructions OrangeMarlin suggested above mentioned at http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2887.html and pages related, and also:
    Tried to boot in UNIX by command-S ( http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1720.html ) which allowed it to run through a start-up in white on black UNIX screen, but, being totally ignorant about using UNIX or performing checks through it, I didn't actually command it to do anything, except to "reboot" which did allow it to restart but, as usual, again didn't fully bootup and stopped at a bluescreen after chime and gray screen with apple logo, but without progress indicator, progress bar, or periodic flashing in the bluescreen I'd mentioned in above post.
    Tried suggestings about restarting before resetting PMU through instructions at http://support.apple.com/kb/HT1431 using keyboard command steps for force quit, restart, force shutdown, but it wouldn't force quit anyway, and I didn't go on to try resetting PMU aware I could make a bigger mess of things.
    Tried also to command-control-P-R for PRAM and it started up, but again didn't complete and left me with a bluescreen.
    It is now only blue without any indicators, flashes, changes, icons (though gray screen and apple logo still show before it turns to bluescreen) until I force it to power down by holding down the power button.
    Any suggestions before I officially give up and bring it in to the shop?
    Any help is appreciated.

  • How do i fix a blue screen without disks

    how do i fix blue screen on macbook 2006 I think? was working fine and just shut down

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • How to sort master-node in master-detail scenario without losing subnodes?

    Hi,
    I've a master-detail scenario and want to sort my master node.
    How can I sort the master node without losing the detail-subnodes?
    If I take a look in class CL_WDR_TABLE_METHOD_HNDL and method  IF_WD_TABLE_METHOD_HNDL~APPLY_SORTING
    Sorting is done by
    - unload node with context_node->get_static_attributes_table into an internal table
    - keeping node state like lead_selection(s) and attribute_properties
    - sort internal table
    - bind internal table to node
    - set lead_selection and properties
    But all subnodes are gone.
    How do you sort a master node?
    Thanks and Regards
    Carsten

    I think you have to write your own logic for that . May be you can implement IF_WD_TABLE_METHOD_HNDL in your class and extend the current logic to support subnodes.

  • Blue screens when playing games

    hello people
    I bought not long ago the msi  K8T Neo-FIS2R  
    It worked great and i got good benchmarkresults.
    But when i installed battlefield 1942 and played it , it would give me a blue screen wich says:  he would dump his memory.
    i installed the latest via drivers and nvidia detonators. (lifeupdate)
    now when i play halflife (counterstrike) thers seems to be no problem at all.
    i know halflife is a lightweight game and battlefield is not, so more heavier load wil make my windows crash.
    Reading almost every thread on this forum i can say i found my solution for the problem.
    I read here that you recommend a pcu of at least: 12V > 20 ampere
    but mine is only 16 ampere on 12V
    I have 4  case fans> a WD raptor > dvd player, burner . etc. >>>> i think i will buy a new psu.
    now i have another problem.
    when i install the newest via drivers and i install the via 2.0/3.0 agp driver > i have this very strange problem.
    when i install the nvidia drivers , the installation is ok > i look with the drivers , and there are none installed. > not even nvidia logo in the left corner (next clock)
    >> what driver i want to install, it doesnt mather. >windows wont use it.
    when i install the via drivers without de agp driver>>> i do not have any problems.
    any suggestions?
    (ps sorry for grammar mistakes > i am dutch  

    hello people
    (geertje > dark half)
    now i've installed windows xp 64
    after some driver problems i've managed to create a very solid and stable system.
    AND when i install the via 4-1 drivers from via my problems seems to be solved.
    NOW after the install of the agp driver > i do not have any problems installing the nvidia graphic drivers.
    strange isn't it.
    in win xp (32 bit) i cannot install the latest via AGP 2.0/3.0 driver.
    but with windows xp 64 i can without problems.
    there are no blue screens anymore.
    tyresmoke: you have advised me to buy a better psu. (i didnt buy one yet).
    But the problem lies with the agp driver from via.
    when i install this one and reboot> it always gives a blue screen> without the via driver > no blue screens   (only blue screen with battlefield 1942 or vietnam)
    there is something with my agp slot or hypertransport??
    anyone suggestions?
    ps . > ive tried mem test 86 for 16 hours and found NO PROBLEMS
    ive run prin 95 and toast for 12 hours> no problems

  • Is there a way to increase exposure without loss of detail/sharpness?.....

    I normally use iMovie for most things. I am producing a DVD for the public. The High Definition video I took last week with my Sony HDR-HC1 is just slightly underexposed. I've tried to correct exposure in iMovie, but this results in a loss of sharpness and detail. Would using Final Cut Pro HD provide a way to fix my under-exposure without losing the detail and sharpness of the video? Any help would be appreciated. Thanks.
    Dan
    PowerMac G5 Quad   Mac OS X (10.4.8)  

    I don't know much about iMovie's capabilities here, but I've seen wonderful fixes with the color correction in FCP... I'd think unless your video is REALLY underexposed (as in so dark most of the picture is black), you'd get fine results with FCP.
    Jerry

  • Rescue & Recovery blue screen on T60 with XP and SSD

    Hi everyone.
    On my T60 (2008-VPT) with Windows XP SP3, I installed an SSD (Verbatim 240 GB). I've done a clone of the old HD on the new SSD and than I installed it on the T60.
    All is fine, but when I try to do a backup with Rescue & Recovery 4.23, after 1 hour BLUE SCREEN appair.
    With the paging file the message was KERNEL_STACK_INPAGE_ERROR, I set No paging file, but another time blue screen, without precedente message but only with code error 0x000000F4 (0x00000003, 0x898E9DA0, 0x898E9F14, 0x805D22AA).
    Any Idea?
    Thank's a lot for your help
    Fabrizio
    Solved!
    Go to Solution.

    Hi
    Welcome to Lenovo Community
    Please try to uninstall the Rescue & Recovery  then reinstall the same
    And try backup again
    Hope This Helps
    Cheers!!!

  • Blue screen at WindowsXP

    Hello I have a serious problem and I believe that this problem comes from my motherboard (MSI 865PE Neo2 PFS). Specific when I playing games I take a blue screen which says "IRQL_NOT_LESS_OR_EQUAL" ,or a blue screen without letters or something else, or it make auto-restart. Because I don't yet put a signature with my system specifications, i will tell it now:
    Pentium 4 2.6 @ 3.0 HT
    AtiRadeon 9600Pro
    512 DDR Kingston 400Mhz
    MSI 865PE Neo2 PFS
    120GB western digital serial ata
    80GB western digital ata100 7200rps
    SoundBlasster 5.1 Live
    Modem
    Please help me as soon as possible.
    Thanks

    At the top of this screen is a "Profile" button. That will take you to a screen where you can access screens to create/edit a signature, select an avitar, change your personal information, etc.
    Copy the information you posted, press the Profile button and then press the Signature button and paste in this information. It would be nice to have power supply info as well. This link shows where to find it:  Moan Guide
    You need to have your ram voltage set to at least 2.65. Try increasing it to this level, or 2.7 or 2.8, whichever is lowest and solves your problem.

  • How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

    How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture.  Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

    Homestly haven't a clue what's going on there. 
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • My one year old disabled my iphone 5 so i need to "connect it to itunes" as the screen directs. I know how to do this with my laptop but it says i will be doing a factory reset. is there any way to get my phone open without losing everything?

    Long story short, my one year old disabled my iphone5 and I need to "connect to itunes" as the screen instructs. I went through the steps and it says that I will be doing a factory reset and I will lose everything. Is there any way to get my phone open without losing everything?? I'm mainly concerned about my pictures and videos.

    Once the Device is in Recovery Mode... it is too late to save anything...
    To minimise loss... after the successful Recovery... Restore from the most recent Backup...
    See Restore from Backup here
    http://support.apple.com/kb/ht1766

  • How can I Scroll Down without losing the lightbox in the center of the screen?

    I already tried with different slideshow presets with no results.
    If I click in the first photo the slideshow screen remains on the top, It seems that it doesn't scroll down with me. I would like to slidedown and click into the last photo without losing the lightbox in the center.
    I already ask for help by chat, but you didn't answer how i expect.
    here the link of the example:
    FOR MUSE STAFF

    Hi
    This is not possible directly using the widgets, as you would need customize this where the page scrolls but lightbox should still be centered.
    Another way of doing would be aligning the images horizontally on page with smaller version and then use lightbox effect , where the clicked image will still be on page but user can click on other images.
    Thanks,
    Sanjit

  • Wouldl like to use an large external with my mac book-if so how can I shut the lid without losing the screen?

    Wouldl like to use an large external with my mac book…if so how can I shut the lid without losing the screen?

    This is the article on the subject:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an ...
    But it does not cool as well when closed. I suggest you arrange your workflow across the two screens side to side, or put the Big Display up on blocks and open the laptop below it, and use both screens in Extended Desktop:

  • HT1436 My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    Great clue Lukas...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Downloaded Lightroom 6 and when my catalog got pulled in i can see the pictures, but when i try to go into develop mode i geta blue screen... how do i get rid of this??

    I need to know how to get lightroom 6 wokring properly and not give me a blue screen when i use develop mode

    Try updating the GPU drivers from the manufacturers website, in the meantime disable GPU processing and Develop module will show.
    See: Adobe Photoshop Lightroom Help | Lightroom Graphics Processor Acceleration (GPU) Troubleshooting & FAQ

Maybe you are looking for