Pulling configs off of VPN Concentrator 3020

I am currently trying to set up a site-to-site VPN for a vendor on an ASA. The vendor has an existing connection through our out-dated VPNC3020. After doing some research on the web, I could not find a way to pull the configs off of the 3020 to expedite the process of setting up the VPN on the ASA. Is there a way to view the configuration on the 3020 of is it strictly GUI based?

Nobody with experience who can help me a little bit??

Similar Messages

VPN Concentrator High CPU

Hello,
I know i'm using an end of life product but was hoping for a little help. We are running a Cisco VPN Concentrator 3000 code version 4.7.2 We only have about 40-45 Site to Site Tunnels max. Total connections is 60.
Every time we had add a new site to site tunnel it is causing issues with our existing tunnels with Latency for users. We notice that the latency and CPU on the concentrator is very high. Spiking at 100% for a good amount of time. Off hours this goes down. This has happened with a number of different new tunnels we have brough up over the last few months. We have new SEP cards installed. We cannot get any TAC support so was hoping someone might have had the same issue and can assist.
Thanks,

Thanks Andrew. We'll look into adding the SEP-E module. Wouldn't that cause consistent high CPU utilization? We've only seen the CPU spike twice to 100% and stick. Normally it's around 2% so there's not much load on the concentrator. We thought there may be a known bug in the IOS.

I have pulled pictures off of my windows desktop to a jump drive to try to put them on my macbook pro (OS 10.7) but they do not show up when I plug in the jump drive.

I have pulled pictures off of my windows desktop onto a usb jumpdrive to transfer to my macbook pro (OSX10.7). when I plug it into my macbook I do not see the picture files. Does OSX not recognize certain files from windows? They are standard .jpg files.

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

VPN concentrator and webVPN

Hi,
Trying to setup VPNc 3005 for WebVPN.
The VPNc is configured with NTP server so
the clock is fine. I installed SSL vpn
client and SecureDesktop software onto the VPNc. Create a local account and
group. When I perform https://vpnc/admin.html, I can manage the
VPNc from the external interface so the
certificate is good.
When I do http://vpnc from the same XP Service Pack 2 workstation, it attemped
to install both ssl vpn client and secure desktop onto my winXP, I have admin privilege on the XP machine, then
it tells me that the vpn concentrator
has a server certificate error. I've
attached the screen shot. Anyone know
what it is? Thanks.

If you connect to a website that loads content (such as images) from a second, previously unauthenticated server, the content might not be rendered correctly. WebVPN clientless mode does not support websites that require authentication for access to content from secondary servers. When using WebVPN with NAT-T, do not set the NAT-T port to 443. We recommend using port 80 for NAT-T, as firewalls should allow this.
http://www.cisco.com/en/US/docs/security/vpn3000/vpn3000_41/configuration/guide/webvpnap.html
http://www.cisco.com/en/US/docs/security/vpn3000/vpn3000_41/quick/start/gs3mgr.html#wp1302684

PIX, ASA or VPN concentrator & dynamic VPN

Hi all,
I need help what to use and how to do next.
What we need is to create remote VPN for many users so that every user is member of more than one group and every group is linked to predefined set of rules, for instance you can access this IPs, ports and so on.
How to do that dynamically? Is it possible to do that with one certificate?
Other question is what to use? ..PIX, ASA, VPN concentrator ?
BR
jl

The PIX and VPNC are both end of sale products now and unless you already have them your only choice is IOS or ASA. Of those two the ASA is the Cisco preffered platform for Remote Access VPNs.
You can map users to groups using Active Directory OUs, let them select a group at logon, have different logon URLs per group etc. However as far as I know this is not possible:
"every user is member of more than one group "
Some links:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008089149d.shtml
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808bd83d.shtml
With remote access IPSEC VPNs you can either define the groups on the ASA or externally on the ACS Server.
Pls. rate if helpful.
Regards
Farrukh

VPN Concentrator authentication with multiple domains

I have a hub and spoke network where a T1 comes in to the hub site A and there is a frame relay connection going over to the spoke site B. We want to add a VPN concentrator to site A for remote access but site A and site B have their own domains that are independant of one another. Can I set up the VPN Concentrator to authenticate users that belong to site A domain using site A's domain controller and authenticate users the belong to site B domain using site B's domain controller? That way we can use a single VPN concentrator and a single internet connection but keep the authentication seperate.
Thanks in advance for any help.

To authenticate users that belong to site A domain using site A's domain controller you should authenticate users the belong to site A domain using site A's domain controller

IP Address Assignment on VPN Concentrator through AD

Is it possible to assign an IP address on a per-user basis using Active Directory as your authentication method for a group within the 3000 series VPN Concentrator?
I know this can be done with ACS/RADIUS, but I do not see any documentation on how this can be accomplished using Active Directory as your external authentication server.

Sorry for the thread title it should be : "reserver" not reverse.
I have been advised to read the "admin guide"
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008026f96c.shtml
under the heading below
Assign a Specific IP Address to a User
In order to assign a static IP address for the remote VPN user every time they connect to the VPN 3000 Series Concentrator, choose: Configuration > User Management > Users > Modify ipsecuser2 > identity.
My question i am using production box (to avoid screw up whole system), does it affect if i want to create a specific group and assign specific ip address to a user
On my PIX (VPN running paralled to the PIX, i.e it is not behind nor inforn of the PIX) what I have got these lines of configurations which are related to the VPN concentrator
nat (inside) 1 10.2.2.0 255.255.255.0 0 0,,,,,,,,ip for VPN pool as seen in figure
nat (inside) 1 172.168.1.0 255.255.255.0 0 0,,,,,,,,,not related to VPN
nat (inside) 1 192.168.0.0 255.255.0.0 0 0,,,,,,,,,not related to VPN
global (outside) 1 10.1.1.150-10.1.1.155
global (outside) 1 10.1.1.156
route inside 10.2.2.0 255.255.255.0 192.168.55.254 1,,,,,,,,,,,,,192.168.55.254, is the VPN Ethernet 1 ip address.
http://img204.imageshack.us/img204/7306/vpnpooleu1.jpg
What I am thinking to do, are below (please any comment) :
1- I want to modify the current group (see my VPN figure ) to be from range 10.2.2.1-10.2.2.9 instead of 10.2.2.1-10.2.2.10
2- Create another group called : " mobile_users "
3- Create a user called : " commuter "
4- Assign the user " commuter " to the group " mobile_user "
5- Assign ip address 10..2.2.2 to the user " commuter "
6- In the cisco site that I have posted , it syas: tick option for " User address from Authentication Server ",,,,I do not think this will apply to me ?
again since I am using production box, I have to assure that the modification above does not screw up the whole system

Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
Samir

Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.

ACS with VPN Concentrator : IP address attribution

Hello,
I need to know if it is possible for ACS to attribute an IP address to the VPN Clients connected to a VPN Concentrator, with XAUTH, instead of the VPN Concentrator,and if yes : how can I do, what is the procedure ? With the attribute Framed IP Address ? Does it work ?
Thanks !
Patrice

yes it can be done at works very well under the radius attributes uses the:
[014] Login-IP-Host
NAS Specifies
User Specifies
Other
Check other and then add the ip address that you want to assigned

Can you pull video off of a CD and use in imovie?

I want to burn all my dad's home movies on to a CD disk and later pull clips off for iMovie. Is this possible?

I translate CD = 'disk', right?
(CDs are tiny data media, fitting 700MB of data... that is less than 15min of modern HDef video...)
You can create videoDVDs from your home videos - but not with iMovie. You need additionally iDVD, the 'disk maker' from Apple. Came preinstalled on oder Macs, not avail at AppStore or Apple.com, but part on older iLife-packages you get at eBay etc.
But...
videoDVD is an end-of-the road. And SDef only, no fullHD .. about a quarter of resolution of actual HDef...
In terms of: not meant to be re-imported again.
Although with a nice pic quality, it is highly compressed. You need 3rd party tools to re-convert > quality loss. High quality loss.
Plan B)
For long term storage buy any external hard drive. Export the movie with maximum quality. (depends on the version of iMovie your using).
DVDs are just an extra; not meant for long-term storage nor re-using.

LDAP ON VPN CONCENTRATOR

I have a vpn 3015, I want my vpn users to be authenticated and authorized to the vpn 3015 throught my Active directory (LDAP).
For Authentication server, I use Kerberos/Active Ritectory Server and it works when I test it.
but for the Authorization Server, I use LDAP server (the same server as the authentication server), with all the parameters like Login DN, Base DN, naming attributes, but when i test it it doesnt work?????why??
Thanks

The VPN Concentrator supports user authorization on an external LDAP or RADIUS server. Before you configure the VPN Concentrator to use an external server, you must configure the server with the correct VPN Concentrator authorization attributes and, from a subset of these attributes, assign specific permissions to individual users. Follow the instructions given here to configure your external server.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_guide_chapter09186a008015ce27.html

Replace 3005 VPN Concentrator

We have two 3005 concentrators that need to be replaced.
Is there anything equivilant that will allow for creation of groups, Cisco VPN client, web VPN and is reasonably priced?
What do people generally do for a plug in replacement to the 3005 VPN concentrator?

What is generally done about the cost?
At the moment, the PIX firewalls are not EOL.
If I replace the firewalls, just because the 3005 is EOL, will be a large expense correct?
Also, at the moment, the firewall is passing through the traffic to the concentrator in a DMZ.
What is the alternative in the ASA appliance?
And, does the ASA allow for the creation of groups for access like the concnetrator does?

What's replaced the vpn concentrator?

Greenhorn here, I didn't sit any of this up. We have three remote sites, sister institutions, that we share an app with. We house the app. One site has a vpn concentrator setup, the other two are using a point to point leased line. They have each have a router that connects to a single router. They want to replace the leased lines with a vpn concentrator. Doing the digging I see the concentrators are EOL.
So what's used to replace the concentrator today? What's a solution today to move away from the leased lines? These are all cash poor non-profits. My guess is they'll say look on Ebay for a concentrator if the solution is too pricey.
Thanks Jim

Sorry it took so long but here's the output from sh version.
Location 1
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(16a), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 18-Apr-03 19:25 by xxxxx
Image text-base: 0x8000808C, data-base: 0x80A0EE84
ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
xxxxxxxxx uptime is 41 weeks, 3 days, 20 hours, 54 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.122-16a.bin"
cisco 2621 (MPC860) processor (revision 0x00) with 27648K/5120K bytes of memory.
Processor board ID JAD07070EVT (2982455740)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Location 2
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(11)T6, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 14-Feb-03 14:34 by ccai
Image text-base: 0x80008124, data-base: 0x80A94064
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
xxxxxxxxxxx uptime is 14 weeks, 14 hours, 22 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sy-mz.122-11.T6.bin"
cisco 1721 (MPC860P) processor (revision 0x100) with 44237K/4915K bytes of memory.
Processor board ID FOC0708028N (496857573), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Location 3
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(11)T6, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 14-Feb-03 14:34 by ccai
Image text-base: 0x80008124, data-base: 0x80A94064
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
Xxxxxxxxx uptime is 13 weeks, 6 days, 5 minutes
System returned to ROM by reload
System image file is "flash:c1700-sy-mz.122-11.T6.bin"
cisco 1721 (MPC860P) processor (revision 0x100) with 44237K/4915K bytes of memory.
Processor board ID FOC0707142M (1927840357), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Location 4
Cisco IOS Software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4(3g), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 06-Nov-06 02:36 by alnguyen
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
xxxxxxxxxx uptime is 40 weeks, 5 days, 6 hours, 22 minutes
System returned to ROM by reload at 13:34:01 UTC Thu Dec 27 2012
System image file is "flash:c2800nm-advsecurityk9-mz.124-3g.bin"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to [email protected].
Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.
Processor board ID FTX1051A01V
2 FastEthernet interfaces
2 Serial interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102

Can I pull songs off my iPod and put them on my computer?

My husband's iPod classic needs a new battery. The problem is that he didn't back up his songs on the computer, so the only place they exist is on his iPod. As you know, when I send his iPod in for a new battery, his songs will all be gone.
So I was told recently that there is a way to pull songs off an iPod and put them into iTunes on a computer. Is this really possible? If so, does it involve new software or hardware? Can you give me specifics? Where is this software/hardware available? Our computer is a PC running Windows XP. I want to do this for him for his birthday. Any advice you can give me will be greatly appreciated!
Thank you!

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

What is a free application that will allow me to pull music off ipod onto laptop

What is a free application that will allow me to pull music off of my ipod onto my laptop?

The above is actually my post. i just got my old user id back. Any help on this topic would be appreciated.
Thanks Guys & Gals!!

Pulling configs off of VPN Concentrator 3020

Similar Messages

Maybe you are looking for