Pulling duplicate members in excel

Hi all
I have just built an ASO cube allowing duplicate members for the first time. I have 2 dimensions with duplicate parents (Other):
Summary Allowed
Other Other
How do I call up "Other" in Excel (using the Excel Add-in). I cannot just put "Other" in the sheet as it returns an error
(unknown member name [[Summary]@[Other]] in Outline query
Thanks for your help as always

Hello,
Create a new member down the first one in your dimension. Put the value 'shared member' in DataStorage options.
Regards

Similar Messages

'Allow Duplicate Members' not compatible with Attribute Dimensions

When setting the 'Allow Duplicate Members' option on there is a problem if the duplicate member is used as an Attribute. When attempting to apply the member filter to use the attribute Essbase throws an error: Cannot uniquely identify a member, the name [L] is duplicated.
In my case L is duplicated across two dimensions [L=LOCAL as a BOOK_CODE and L=LIABILITY as an ACCOUNT_TYPE].
The ACCOUNT_TYPE is an attribute dimension related to the ACCOUNTS dimension. Both the excel addin and Financial Reports have a problem as their member selection interfaces don't fully qualify the selection.
This seems like a bug.

When you sync over the cable, it is one set of calendars in one section labeled "From My Mac" when you sync with iCloud, that is store in a completely separate area labeled "iCloud." The "From My Mac" calendars are stored on the phone as just "regular" calendars. The iCloud account are "CalDav" calendars, which syncs with iCloud. The old mobileme calendars did do what you wanted, sync over the cable and then to mobileme, and that lead to huge data corruption and why Apple made the new mobileme calendars which sync over CalDav only (and cannot talk to the cable) to protect the calendars. The phone sees them as two separate calendars.
Your best bet is if you want to use calendars on your G4 is to just use the iCloud.com web interface. I'm also not familiar with the whole drop box thing, so I can't comment on that.

Shared Members in Duplicate Members Hierarchy

It seems that many people have asked this question on this forum but I am yet to find a solution. Most of the posts were about 5 years old so I am hoping maybe something new has happened since.
I have a dimension that has a regular and alternate hierarchy (shared members). I have changed this dimension to duplicate members enabled. Once I have this turned on, my regular dimension build rule no longer creates shared members but instead creates a new member of the same name. I cannot find any property that I can put in the dimension load rule to specifically tag members as shared. The only way that I can change it is in EAS one by one. Is there any fix that allows me to load shared members through a load rule with duplicate members enabled?

You may have seen my posts on this on Network54 from 2007 or so while you were searching. I could never find a way to do this, and there is no property to tag members as "Shared" to the best of my knowledge. I tried it again quite recently (in 11.1.2.3.500) and got the same result.

Duplicate Members - Please help!

Can anyone please give me a good explanation of how to add duplicate members in an ASO cube via Essbase Studio? Firstly, I have created an inner join between parent and child members of one of my minischema tables. Next, I go to the model properties and check the "duplicate member support" option. I then go to the member that I want to allow duplicates for and in the "outline build" tab I check off *"Ignore duplicate members, do not move"* I'm assuming this means that when a duplicate member is encountered it should be allowed to stay in the cube... Anyways, when I try to deploy the cube this way, the duplicates don't come thru. Am I following the correct process for adding duplicate members?
I've also read that my member name needs to be fully qualified. How do I do this in Essbase Studio?
thanks,
Akshay

Can you try closing the outline without saving and manually adding in some to see exactly where the error is? It sounds like there is a duplicate member not marked as Share. Are you using a load rule to build the outline? I agree with the last post about checking the dimension build settings.

Upload duplicate members to ASO

I'm testing for a conversion of a cubo to one that allows duplicate members. So far, the outline has been constructed properly, including my test members [dim1].[OTHER] and [dim2].[OTHER]. However, I can't upload any data to cells in those members.
When I include just the leaf member names 'OTHER', I get an error in the dataload.err file saying OTHER is a duplicate member, even though they already exist in their dimensions.
But, if I type the qualified member name [dim1].[OTHER] in the datafile, EAS throws an error saying "Aggregate storage applications ignore update to derived cells. [%s] cells skipped". I am sure it does recognize those names as existing in the outline because changing the name throws the usual "does not exist in database" error.
I figure it interprets qualified names as having formulae in them. Is there any workaround this issue?
Thank you,
Alejandro Castro
UPDATE: I tried giving different aliases to each duplicate member (others and otherss), and got the same "Aggregate storage applications ignore update to derived cells. [%s] cells skipped" error message.

DataStorage is set to 'Store Data' for both members.
Alejandro Castro

Importing duplicate members for planning appln - EPMA Dimension Library

Hi,
How to import duplicate members while importing dimensions using flat file in EPMA Dimension Library (11.1.2.1).
We have Isprimary column which enables multiple instances of a member as shared members, but how to import duplicate members in EPMA?
From the EPMA Guide:
Specifying Primary and Shared Instances of a Member using IsPrimary
In import files, any two members in the same dimension, with the same name, are always treated
as separate instances of the same member. If a member has multiple instances in a dimension,
the IsPrimary column specifies which instance is primary and which instance(s) are shared. The
IsPrimary column is not required; however, we strongly recommend that you use it. If left
undefined, it defaults to “True”, which assumes that the member is primary. If left undefined,
a warning is displayed in the Import Results file.
Note: Older import files, that do not use the IsPrimary column, can still be run. However, if the
import file does not have the IsPrimary column, it is not possible to create shared members
or move members.
Thanks in advance.

As you are talking about a planning application then duplicate members are not supported but Shared members are.
Cheers
John
http://john-goodwin.blogspot.com/

Duplicate Members From Same Dimension On Data Record

Hi guys, been a while but I'm back into problem land again. I got a SQL Server database with a load of records in it, some are NULL, and I use them to build a rules file called CGI_BUILD. When I run the rules file on the outline it builds fine with no errors but when it does the second part of loading the data, it kicks out an error file. The error that repeats over and over in the log is "\\ Duplicate Members From Same Dimension On Data Record". This seems to be the case for every record in the load file except for the second record. The only difference with that record is it has N/A for some of the columns instead of the regular "Retail" or "Finance" or whatever the other fields are.
I realize you have limited information here without screenshots but maybe you can help me get started on a solution. In my searching I found that some people have had this happen when the first record has an empty column in it but I can't rearrange them because there's a few columns that are empty for every record. They're there for add-ons later in the project. Any ideas?

To my outline, via SQL load, I added a new attribute dimension called Retail Region/Area:
-Retail Region/Area
--West Region : Region Manager
---Area1 : Area Manager
---Area2 : Area Manager
---Area3 : Area Manager
--East Region : Region Manager
--Factory Region : Region Manager
---Area1 : Area Manager
---Area2 : Area Manager
--Central Region : Region Manager
As you can see, it's split up into regions which have a region manager. And each region has a pile of areas which each have an area manager. The relationship for each region/area to its respective manager is 1:1.
To my rules file I added 3 new columns:
GEN1,Retail Region/Area (data = "Retail Region/Area")
GEN2,Retail Region/Area (data = Region Name : Region Manager)
GEN3,Retail Region/Area (data = Area Name : Area Manager)
I've ignored the data load and dimension build on the first 2 columns, but the third one, the lowest level, is the one data is being loaded into, among many other dimensions. The only weird thing I noticed is the last column (GEN3,Retail Region/Area) doesn't have a Field Name under the Data Load Properties. It's just blank.....but I don't think that would matter.
Now to answer your questions.....multiple columns that have members from the same dimension........it doesn't look like that's the case with the three columns I added. Am I missing it? And the rows I should be looking at......are you referring to the SQL database or the data prep editor in Essbase after loading the SQL file? I'm not converting NULL to anything that I know of. If it was preset before starting the project it's likely the same for every dimension. And as far as transformations, I'm not familiar with that so that would be a no.
Message was edited by:
DeX
Message was edited by:
DeX

Data Load Duplicate Members Warning / Error

Hi,
I am running Essbase 11.1 and haven't used duplicate member settings much before. I'm having some trouble with data load errors.
Background
I have a dimension called "State" which includes member "SC" for South Carolina - however this is a parent member, and data loads go to it's children.
I also have a dimension called "Method" which includes member "SC" for S-Cycle
Both these dimensions are flagged to allow duplicate members.
Problem
When I load data to my outline, my error message says "Member SC is a duplicate member in the outline". I am using a rules file, and have told essbase that my one column represents the "Method" dimension. Because I load to a child of the state, I am not loading data to SC state directly (I ignore the state column in my data).
Any ideas on what I need to do to get this to work? I"ve tried prefix/suffix to add [Method].[SC] and similar but no luck so far.

Thanks John - still not quite working
I should give another detail / extra complexity
The "Geographic Location" dimensions looks like this:
"Geographic Location" (Gen 1)
"United States" (Gen 2)
"SC" (Gen 3)
"Unique Facility 1", "Unique Facility 2" etc (Gen 4)
The data I have would be for Facility 1, Facility 2 which are unique member names which just happen to roll up under SC in the outline. I would have thought it would just load directly to those members without needing to specify their parent values.
Do I need to specify [Geographic Location].[United States].[SC].[Facility 1] ? This seems like it's something that needs to be done in the source file rather than using the prefix/suffix features of the Rules File.

FDM Essbase Adapter - Duplicate members from same dimension on data records

I am getting this error message when trying to export data to Essbase using FDM.
Error - Duplicate members from same dimension on data records.
Though this error looks quite straight forward, I could not find any thing in the data file to indicate the same. I even tried loading a single row data, but still got the same message.
What other things I should be looking at to fix this issue?
Thanks.

There are one or two previous threads on this, but this might give you some help to start with as it links to an esssbase document which gives suggestions for the error message:
Error in dataload- Duplicate Members From Same Dimension On Data Record
another thread indicated that the first record had a blank in it and by re-sorting to have the first records with all fields populated resolved the issue (not sure on this one).
from the FDM side:
1. Are the dimensions correctly mapped in the Essbase adaptor?
2. Are the dimensions in the correct sequence for loading to Essbase.
3. Does the same value appear In more than one field (Can't remember but i think essbase didn't use to allow the same member name across dimensions).

Duplicate members from same dimension on data load

Hi friends,
i have three dimensions.ORG,CUSTOMER,MEASURES. I HAVE SHOWN THE STRUCTURE BELOW.
ORG
group(GEN2)
raja(GEN3)
vertical(GEN2)
raja(GEN3)
CUSTOMER
raja(GEN2)
MEASURES
actual.
I AM USING DUPLICATE MEMBERS CONCEPT.
The problem is that how to load data for duplicate members in the same dimension.since i am having group and vertical under ORG. how to give names for those colums.i have given my data file which i used to load.
gen2,ORG gen3,ORG gen2,CUSTOMER actual
group raja vertical raja raja 20
here i dont know what name to give for vertical and raja since it is a duplicate member from the same dimension.
i also tried to load data for group and verical separately. it loads successfully. but when i view the member raja(from CUSTOMER dimension) across actual i get the value as 40. since i have loaded the data twice( one combination for group and one for vertical.
can anyone help me to resolve this problem. it will be of great help to me.
Thanks.

Hi,
To ensure duplicate member outline hierarchies are built correctly, use qualified member names in data source or use the rules files to construct qualified member names from fields in the data source
Example:-
suppose we have this data set-
West India Delhi 12344
West India Bangalore 46544
East "New york" "New york" 126787
Here I am using the RULE FILE to construct qualified member names--
Step 1:- Create the additional TEXT fields, create one field each for the
following text elements-
Step 2:- Using the MOVE operation, move the fields to the following sequence:
1 . .2 . .3 . .4 ..5 ... 6 . 7 . . . 8
[   west ].[ India ].[ Delhi ] 12344
step 3:- Using JOIN operation, join together fields 1 2 3 4 5 6 7 to create a
signle field as
1     .     . . . . . . . . . . . . . . 2
[west].[India].[Delhi] 12344
OR
you should specified the full qualified name in your DATA SOURCE.
Hope it will help you.
-Mohit

Duplicate members to be showed as shared member

Hi all,
working on ver11.1.1.3.X,i tried to build dimensions through rules file but some duplicate members are there in the .dim file. I have build the primary member hierarchy first and later tried to build the member hierarchy having duplicates,when i loaded the duplicate member hierarchy the members in primary member hierarchy were automatically deleted.
I'm using Level reference for dimesion building. The duplicates in the second member hierarchy should be shown as shared members,
can any one tell me how to make the duplicate members as shared with level reference?
thanks in advance

Hi gurus,
I'm building two members of a dimension hierarchy through rule files, i have two .dim files in level reference format so i created two rule files.The problem is during defining the dimension build properties because some of the members in the second member hierarchy have to be defined as shared members.
Let say i have a dim A and the members are B & C. I need to load B.dim,C.dim files by using level reference method through B1.rul,C1.rul files. C.dim has some duplicate members of B.dim which are to be defined as shared members of C member.
The duplicate members are at different levels(in B at Levl2 and in C at Levo- these Lev0 duplicate members have to be shared ).Please help me out in defining the dim build properties,
thanks in advance
Edited by: kailash on Jan 4, 2012 11:27 AM

Duplicate members

HI,
I HAVE CREATED A CUBE(block storage and using duplicate members) in HYPERION ANALYTIC ADMINISTRATION SERVICES 9.3.when i tried to access the cube using interactive reporting i used to get this error message (CANNOT UNIQUELY IDENTIFY A MEMBER.THE NAME[DIRECT COST] IS DUPLICATED).can anyone help me how to resolve this problem and how to view the duplicate members in interactive reporting?
Thanks in Advance.

Hi,
I'm not sure what you mean by enabling duplicates for two dimensions ! Duplicates are enabled for entire database.
Have a read of the following before you start working on duplicates,
[http://docs.oracle.com/cd/E26232_01/doc.11122/esb_dbag/dotnonuq.html|http://docs.oracle.com/cd/E26232_01/doc.11122/esb_dbag/dotnonuq.html]

Essbase error, Duplicate members

Hello,
I need to solve issue about data preview error. Please, help.
When I press preview data of an essbase database, I see an error stating that "Duplicate member names are not currently supported", although in properties tab allow dublicate member names is set to true. I also, changed names of dimension members that had duplicate members, it neither work..
Any ideas?

To be honest that data file is not the best, when I tried to load the data I got
\\ Member Not Found In Database
" "USA E SE" "[PL_Products]@[B1003]" "[PL_Customers]@[SR100]" 340415
So I removed the " from the record, then I got
\\ Member "USA W N Not Found In Datase
So I removed the last record
"USA W N
It all loaded ok then.
Buffer id [9999] initialized with options: resource_usage[0.20], aggregate_sum, ignore_missings, ignore_zeros
Database BksSP82R.BksSP82R altered
Output columns prepared: [0]
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Data load stream contains [1764] zero and [0] #MISSING cells
Data Load Elapsed Time for [BksSP82R_AllData.txt] : [0.172] seconds
Database import completed ['BksSP82R'.'BksSP82R']
Output columns prepared: [0]
Data load buffer commit elapsed time : [0.047] seconds
Database import completed ['BksSP82R'.'BksSP82R']
Output columns prepared: [0]
Also make sure the data file is in the correct format for Linux.
Cheers
John

Handling duplicate members in EIS

Hi,
Can any one please let me know what does selecting 'Move members' option for Duplicate Members do in Essbase Integration services.
I found some information in online help about it but am not clear with it
Thanks in advance

Hello,
Create a new member down the first one in your dimension. Put the value 'shared member' in DataStorage options.
Regards

Find Duplicate Members in more than two Active Directory Groups

hi,
I am trying to find out duplicate members in more than two active directory groups. I am new to powershell and only found one script that gives me only duplicate members in two groups. If any one can help

I have this script that find duplicate members in two groups
$GroupAMembers = ""
$GroupBMembers = ""
$Members_A = ""
$Members_B = ""
$GroupAMembers = Get-ADGroupMember (groupname)
$GroupBMembers = Get-ADGroupMember (groupname)
ForEach ($Members_A in $GroupAMembers){
ForEach ($Members_B in $GroupBMembers){
if ($Members_A.name -eq $Members_B.name)
Write-Host $Members_A.name

Pulling duplicate members in excel

Similar Messages

Maybe you are looking for