Pulling Hair Out! Need Help: Adobe Prem 6.0 Distorted Audio playback in Timeline

O/S = Windows 2000 Pro
Adobe Premier 6.0
I am in the process of compiling a project in Adobe Premier 6.0, where, up until yesterday, it was playing back perfectly in the Timeline window. Unfortunately now, when I  preview the project in the Timeline window, the audio has become distorted, out of sync, and is now 'slower' than the video footage (sounds a bit like a Darlek!), this also happens when I view a clip in the Monitor window. I closed this project down and started a new one, importing a seperate 'audio only' file, but had the same problem. I then opened a previous project that has always played back perfectly but that too had the same audio/video problem. I have checked the frame rate and the speed and both are correct and ok. Incidentely, the audio and video are in perfect sync when I play any clip in the Project Window!
PLEASE PLEASE PLEASE can someone help me. I am pulling my hair out on this one!
Thank you.

John
Thank you so much for all this (and wine snob) Sorry I've not contacted you sooner but my internet connection is down at home......it never rains but it pours eh? I will read and digest your suggestions fully when I'm back up and running.
Thank you loads.
Sarah
>An added note to Sarah (if she ever comes back)
> 
>The HTM note in the Zip I uploaded says the 6.02 update is a Beta... but don't
>be worried, Adobe moved on to P6.5 and then the new PPro and just never
>changed the note for 6.02
>P602 IS stable (I still use P602, in a Win2k boot partition) to run my
>Pinnacle Dv500 card for 8mm/Vhs captures... in fact, the only reason I now use
>Premiere Pro is my new computer's motherboard wouldn't work "fully" with Win2k
>(couldn't find device drivers for all the features) and when I switched to
>WinXp I couldn't get P6 to work at all... so now I have a dual boot drive,
>using Win2k only when I want to use the Dv500 and then rebooting to use PPro
>for editing (all data is created onto a 2nd hard drive)
>

Similar Messages

  • Error message - pulling hair out

    Hi forum
    I am pulling my hair out.
    Every time I start Prem Pro I get the following message
    “Prem pro could not find any capable video play modules – Please update your video display drivers”
    Now this started suddenly yesterday and I have been using the programme all last week for a job I am half way through with no issues. It was very sudden
    I am running vista 64 bit and an ATI radeon X1050 graphics card. 4GB ram
    I have tried following
    1/ disable anti virus and firewall - no
    2/ system restore - no (twice)
    3/ update video driver - no
    4/ uninstall and reinstall cs4 suite
    5/ msconfig - startup with no other applications or services - no
    6/ kick the machine - no !!!
    I am really at a loss. I have seen a couple of forums on the web covering this subject but so far nothing has helped me.
    Any ideas please
    Andy

    Andy,
    3/ update video driver - no
    As per the error message's text, this would have been my guess. Now, did you update with the latest driver directly from the ATI site? Can you roll-back to an earlier driver and try that? Can you check to see that your vid-card is, in fact, using the newly installed driver? Sometimes, installing an updated driver is not the most simple of tasks. With Matrox, one must first remove the old driver, reboot, then install the new one - don't know if that is still true. However, each site should have specific instructions on the exact steps required.
    When things like this change, it's often some hot-fix from MS. Some can be rolled-back with System Restore, though a few cannot. Often, these will fritz both Audio and Video drivers quickly.
    Though less often a fix in PrPro, than in PS, you might want to Move your Prefs files, and let PrPro rebuild them. You'll obviously have to change them, should you have any custom settings from default. Again, this is seldom necessary in PrPro, but happens to fix many PS problems.
    Nothing else that I can think of right now.
    Good luck,
    Hunt

  • Slowly pulling hair out

    I have tried everything that itunes suggest for error code 3194 and nothing is working, my daughter put a password on her phone that she forgot but this error message is stopping me from restoring her phone, please someone help me as i am slowly pulling alll my hair out. We have 3 iphones and cannot update or restore any of them. we run norton 360 and someone said that could be interferring with itunes but it all says itunes is running properly. PLEASE HELP!!!!!!!

    the phone hasnt been jailbroken has it? I found this on  a website
    Error 3194
    Occurs when trying to install an old firmware and Apple's server disallows the installation.

  • Pulling hair out!

    I recorded a basketball tournament championship games direct to disk using FCP6. Got the first half fine. did second half fine. Game was over and I was letting the announcer do his stats. A little kid came up and unplugged my external drive. I was left with a .av file. Can I recover this file? It is a 10gig file. PLEASE someone tell me I can. I know, yes I know I should have used tape as backup but I was doing a three camera shoot using a switcher. I came close to child abuse, but what the heck he was only a kid...

    Now you know to save more often instead of having all of your eggs in one basket.
    Your file was not properly "closed". If the Get Info window shows appropriate file size you may be able to add the needed info using a "hex" editor.
    Not for the faint of heart but fairly straight forward. You need to find any "good" QuickTime file and compare the header (sometimes at the end of the file) data to your non-working version.
    What you have now is the just the digital info but no way to open it. A can of tuna without a can opener and you want a tuna sandwich.
    A hex editor allows you to open the "raw" file as something that looks like text. When you compare a working file with yours you should quickly see the difference. Copying the missing data from a working file and pasting into the broken one can sometimes fix the file.
    You should have pulled the hair out of the little kid instead of your own. But you've also learned a very basic computer issue. Save. Save often. Save to other locations and media. You could have just as easily dropped your laptop and crashed the HD.
    Google around for a Mac hex editing app. Many are free.

  • Need help adobe bridge cc output module

    I need help. I have an assignment I'm held up on completing because the adobe cc bridge does not have the output modue I need. I followed the adobe instructions page to the letter. I copied and pasted the output module folder to the adobe bridge cc extensions folder in programs/commonfiles/adobe. The only thing is the instructions then say to paste the workspace file into the workspace folder located below the bridge extensions folder. I don't have a workspaces folder there or anywhere. I even tried must making one and adding the file to it, but no go. can someone PLEASE help me with this?    I have an assignment due like now that requires the use of the output modue.thanks!

    oh,my system is windows 8.1. sorry, lol.

  • Obtaining Row Clicked -- Pulling Hair Out

    I am working on a nice simple master detail. I have created a datatable and made one of the columns an action link. In the action handler for the link I attempt to get the row data from the dataTable object (to which the view is bound). However, I receive an illegal argument exception when I try to retrieve it. Depending on the various things I have tried I have either gotten an illegal cursor operation from oracle or this illegal argument exception. Also, all of the values for the individual element objects (like linkActionTexr or outputText) are null when they come to my action handler. So, how do I go about getting this information??? What am I missing??

    OK I have figured something out that appears to be part of the problem. Now, I just need a fix. The first time a click a link and go to the detail page I get an IllegalArgument Exception. What I am doing is in the acton for the link I store the getRowData (com.sun.jsfcl.data.DataCache.Row) in a session object. Then, on the next page, I pull values out of the map on that row and stuff them into fields. Is there some method or property that I need to set on the RowSetDataModel??
    Thanx,
    LES

  • Need help!! Compaq V3500 No audio driver available in website

    Need Help Compaq V3510TU P/N GG201PA#AKL Windows XP Professional 32 bit, After I re installed the new OS..
    The windows doesn't have the audio driver.  I tried everything download many of Conexant HD  many many version...
    they don't work at all. 
    Please tell me what you should do next
    P.S.  Last year I came to hp website, it provided many driver in windows xp but now nothing... where 'd they gone???
    I tried these, but didn't work
    sp36509
    sp35682
    and many many of them
    This question was solved.
    View Solution.

    Hi:
    Please read the XP downgrade guide at the link below:
    http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
    The instructions for installing the audio for your model can be found under the section labeled 1. Easy Models
    More than likely you didn't install the required MS UAA driver before installing your audio driver.
    You will need to uninstall any audio drivers you tried before installing the MS UAA driver.
    Paul

  • Need help recording Video over pre-recorded Audio

    I'm making a music video, the audio has already been recorded, but I am having such a hard time trying to figure out how to record the video over it. I need to be able to hear the audio track while recording so I can sync it properly, but whenever I click on the 'Open Camera Import Window' button, it doesn't allow you to playback the audio. What is the easiest way I can go about this?
    PS. If my question is vague or unclear, I'm sorry. Every person I have asked said they had no clue what I was asking.

    Hi Rick,
    Thank you for your response.....I have always done this process using other software for the videos....so the process here is different for me.
    I pre record the audio first, then edit to remove all of the terrible sounds...breathing, mispoken words, etc...clean up the audio, then add a background music track all in Audacity.  Then, I add that track in and record my video over it.  I am creating a tutorial for a software company on how to use their software.
    This may seem backward.  My question now, I am in Captivate 7, I press video demo and it goes straight to recording the  video before I have a chance to import the audio track.  I need the audio track so I can get the video to follow the audio...if that makes sense.
    Cheers...Robert

  • ATV (Gen3) Newest updates severely distort audio playback from iTunes. Please Help!!!

    I just updated my iTunes and ATV (Gen3) to the newest versions and immediately noticed severe distortion in audio playback from iTunes library. No hardware changes have been made and yesterday the sound quality was just fine. I have one running an optical cable into a high end receiver and another running off a HDMI cable into the TV with powered Speakers for output. I checked both systems on all inputs and it's only the Apple TV with the distortion. Someone please help as that is the only thing I really use on the device. iTunes version 12.0.1.26

    Weird, I just opened iTunes to add some songs and now its playing fine.
    Though I still can't figure out how to change the columns and having them stick to what I want .

  • Flash - Pulling My Hair Out - Please Help!

    Hi everyone. I support multiple users with flash. Recently,
    some of my users are having an issue with some websites that
    display flash content. Specifically, they will appear to load the
    content, but only have a blank space (no X's or error messages).
    What's stranger is that other flash sites (Adobe's tester.. the
    M&Ms site.. many others) work perfectly fine.
    Here's an example:
    http://www.shopplymouthmeetingmall.com/directory/lower_level
    On this site for some of my clients, the map simply won't
    load. You'll notice the transition effect (which is visible), but
    no map. Just white. I've tried this on IE 7, Firefox 3, Latest
    Opera.. all the same result.
    Here's what I've tried so far:
    - Put afflicted sites in the trusted security zones
    - Uninstalling/Reinstalling v9
    - Installing v10
    - Cleared registry keys of all flash content.. install v9.
    - Cleared registry keys of all flash content .. install v10.
    - Update Java (just in case) to latest build
    - Ran flash uninstaller with /clean switch.
    - Cleared browser cache
    - Deleted browser objects
    - Tried a flash9f build someone suggested
    All no dice. I don't understand why flash seemingly works on
    many web sites but not all of them. I'd chalk it up to poor
    programming, but it works fine on my machine, which has an
    identical image to one of the machines not working properly.
    Can someone look at that site.. what it's trying to load..
    and maybe guesstimate a course of action? It's not a mission
    critical problem..but it's driving me nuts! I'm almost ready to
    format these puppies!
    We're running XP SP1.

    Do you have a small preloader to ensure that the script
    doesn't run until all the frames have been loaded? I've had similar
    problems and now all my stuff have a small preloader
    upfront.

  • Intermiten​t VISA Write error - Pulling hair out

    Running an app that uses a couple serial devices.  One is a stepper drive that is controlled by simply sending command strings to the drive controller via serial connection.
    Have had to update to Win 7 (from XP) and as well upgraded to LV 2013.    Now all of the sudden I get errors from the vi that writes to the serial port. Sometimes it goes for a couple hours before popping up, sometimes 15 minutes.  There is not even much consistency as to which iteration of the vi pops the error.  I have added delays here and there, put a delay in the write vi (attached), added a clear buffer before the write, etc, etc.  This bug will not go away.  this is the error that  pops up..
    I have attached the vi.  It is about as simple as they come which is why I am pulling what little hair I have left out.  Two changes in this version from the original that ran forver on the XP system, the 150 ms delay between Write and Close (since increased to 400) and I have also changed the timeout on the Configure from 10000 ms to 5000 ms (10 sec to 5 sec).
    Once this happens then all serial connection with the computer is hosed and I have to reboot the system to get going again.  The computer, a relatively new dell, has one built ini serial and I am using a StarTech expansion card for two additional ports. (2 Port PCIe RS232 w/ 16550 UART)
    ANY help is much appreciated on this as having to go reset the system 10-15 times a day is killing me.
    Doug
    "My only wish is that I am capable of learning each and every day until my last breath."
    Solved!
    Go to Solution.
    Attachments:
    Write to Stepper.vi ‏35 KB

    Ok...  Have created the AE as suggested.  In fact, took the opportunity to convert another serial device to that format as well.  The third device was already configured that way.  As I mentioned, I have used that method before, just not by that term.
    Since that change, the error has popped up once yesterday and once again so far this morning.  And still, once it does, all my serial communication is hosed and the system has to be rebooted.
    So is this still a LV issue or could it be connected to the addon serial IO card that I am using.  I mentioned the brand/model in the first? post.  I tried to get a more mainstream brand as I had tried an off brand at one point and had dismal results.
    I have attached the modified vi I am now using for the stepper control. (includes a couple additional vi's that are used inside it to generate strings & a typedef).  I am using the Init case once during the initialization of the system.  I use the Close case only once when exiting the application.  At all other times, I am using only the Write case.  If there is a reason to stop the process during assembly, the Kill case can be called which simply sends a kill/stop string to the stepper control. This rarely happens and has not been used when the error occurs.  There are a couple blank cases I made for future use so I can use this as a template for other projects.
    The last few times, the error is showing up on the third Write of the assy sequence. This after completing dozens of succesfull assembly sequences. I am tracking this by placing error cases at the end of each step in the sequence with booleans in each error-true state so I get a true for the particular step that generates the error.
    I have added a ton of probes this morning to see if there is anything else in the code the comes up unusual when this occurs.
    Note that I have left the Termination Character Enabled set to True in the newer code though it was False in the original code.  Any detriment with that?
    Any benefit in adding a Clear Buffer just before the Write to make sure there is not some anomalous character that gets thrown in at the front of the string?
    Just need to get this behind me.
    Thanks...
    Doug
    "My only wish is that I am capable of learning each and every day until my last breath."
    Attachments:
    Stepper Ctrl AE.zip ‏34 KB

  • Amazon API to pull down pricing  Need Help!

    My searches for CF code to pull down amazon book pricing all come back with old information.
    I need some help setting up the Amazon API.  I just want to pull down pricing and other book info based on a query.
    Any help will be appreciated.

    Steve,
    Have you (since you posted) managed to work out where you went wrong?
    Basically, you forgot to set the amount borrowed.
    Also, I urge you to break your program up into methods, and also to "split long lines"... that output msgbox line is a doozy.
    Here's my main method....
      public static void main(String[] args) {
        try {
          while ( true ) {
            // choose your loan option (or Cancel to quit).
            Loan loan = selectLoan();
            if (loan==null) break;
            // enter amount borrowed (or Cancel to quit).
            double principle = enterPrinciple();
            if (principle==0.0) break;
            // calculate the monthly repayment and display it.
            displayMonthlyRepayment(loan, principle);
        } catch (Exception e) {
          e.printStackTrace();
      }Cheers. Keith.

  • After buying Adobe Premiere from the cloud, installation by (Adobe service), my InDesign CS6 quits on startup. Need help, Adobe doesn't want to fix this.

    If you buy a cloud application while you have a totally legal Creative Suite Premium 6 it might stop working. Adobe made the installation by taking control of my computer. The girl did not seemed totally well trained... my opinion and right after that my InDesign stopped working!!! Now my If I call to get help they send you here because they don't want to spend money fixing that problem. So, I wonder if it's a good idea  to buy a new application from the cloud if you already are a good customer. It's probably safer to buy other CS6 or CS5 versions if you already have some. Otherwise you might be stuck to buy the entire package through the cloud even if you don't need the last versions. To solved my problem, I erased the applications with all the preferences on the second time around, reinstalled everything and InDesign still quits on startup. I have the same setup at home but this one does work.

    Hi Jeff, here is a transcript of a chat I had with Pradeep. This should get you up to date with the situation. Meanwhile, i actually download the entire software from this address to reinstall the InDesign: licensing.adobe.com
    Pradeep: As I understand you are having trouble with using Indesign CS6.
    Pradeep: Is that correct?
    André Guernon: Yes, it was working fine like the rest of my CS6 premium but after premiere was installed it failed completely.
    Pradeep: Thank you for confirming.
    Pradeep: May I know if you are getting any error message when you try to launch the software?
    André Guernon: Yes, InDesign quit unexpectedly.
    Pradeep: Okay.
    Pradeep: Before you get the error message, may I know if you are able to see the workspace, the menubar and the tool bars of indesign software?
    André Guernon: I see nothing of the interface, the process takes about a quarter of a second.
    Pradeep: I am sorry for the Inconvenience Andre.
    André Guernon: Thats OK, just happy that you are here.
    Pradeep: I wish I could help you with the issue but we (chat support) handle issues with  Download and Installation, Adobe CC products.
    Pradeep: As the issue is regarding an old version, I request you to visit Adobe forums where our experts will be able to assist you.

  • Can't get folders to stay in column view... pulling hair out!!!

    It doesn't matter what finder view options I set, they work for 1 or 2 times opening a finder window in column view, then goes back to the icon view. I hate icon view!!! What is the ridiculous deal with this and how can something so chump-change, penny-ante as keeping a simple folder view preference be so ridiculous as to migrate from one version of OSX to the next!?!?? At least there was an app in 10.4 that was in Utilities that you could log in as root, reset the windows the way you wanted and then log back out. Ridiculous that you had to do that kludge, but it worked... but I can't find that application anymore in Leopard... arghhh! Wow, I feel a bit better to have vented Can anyone help me fix this so I can always have Column view as the default... and possible save my sanity in the process?

    Does this KBase article still apply?
    Mac OS X: How to Save a Finder View (Column, Icon, or List) for a Specific Folder or Disk
    It appears the Finder only keeps the desired setting if set on a newly opened window. If the folder was navigated to within the window and the setting is changed, that setting is temporary. So you need to (temporarily) set the Finder to open folders in a new window (Finder Preferences) so any window you navigate to is a new window, a "starting point". Then you can actually save that folder's setting. Note you can leave the "Show View Options" window open as you change between windows and it relates to the active window. Once all your desired folders are set, you can uncheck to open folders in new windows.
    I usually navigate in column view and of course clicking through folders in column view is not the same as opening a new window so I had to create aliases of some folders to test with but this worked for me.
    (hmm, further testing, they seem to keep for me even when set by navigating to it within a window.... but this might be worth a try)
    Ivan

  • Having issues with my new iphone6 wants factory reset, but icloud is grayed out, Need help!

    I am having problem with the imessage, facetime and icloud.  Facetime and icloud and completely grayed out right from the setting.  As to the under the "Messages" setting, iMessage is grayed out too.  I tried to use the "reset all settings" function on the phone, but I forgot my restriction code.  So I want to use factory restore on itune to restore my iphone, but it needs me to go to icloud setting to turn off the "find my iphone" before I can use the restore iphone.  But I can't access the icloud with the phone, since it's been grayed out.  Now I am stuck.. Please help!

    iOS 7 forgot restrictions passcode
    On the discussion, there are instructions to go on iCloud.com and erase or factory reset your phone.

Maybe you are looking for