Pulling My Hair Out! K7N2 Delta2 & MSI NX6200AX (solved, see link last post)

Posted about the troubles more then a month ago here: https://forum-en.msi.com/index.php?topic=96306.0 . Quick history, Built my Teens a PC with the Delta2 MB, an old XP1700 CPU, some old DDR, and my old (OC'd for 3 years and still running great) Gainward GF2-Ti. It worked fine. Ran most games just fine and they were happy. Then Son #2 wanted Battlefield 2. Hmmm...it needed Dx9c shader support...which the old card didn't do. So I got (Newegg) a MSI NX6200AX (GF6200 - 128MB - 9c shader support) and its been nothing but nitemares ever since.
It will boot up (did a clean copy of XP even!) in Windows. But as soon as I open a program that does any crunching (Like say trying to load nVidia drivers) the Monitor screen goes "black"....and the little lites go back and forth like Kit the car on Nightrider!!!!! Meaning it has lost signal.
Put the old card in and it fine!!!!!!!
Things I've done trying to fix it:
Reloaded Windows XP SP2 (right now SP2 is not installed yet)
RMA'd the Card for another one.
Bought a new 450W Rosewill PS. (was a nice old Enermax)
Swapped in my 19" Trinitron (thinking maybe the monitor couldn't support the card since thier monitor is a cheapo 17" CRT. Same thing happened to my monitor!)
Dug through the Bios with a fine tooth comb.
Today I added new Kingston DDR I mentioned in another post. Premium HyperX 1GB in Dual Channel. I also re-seated the CPU with new AS5, cleaned out everthing. PC booted up much faster.......
So I tried to load the drivers......AND IT STILL HAS THE SAME PROBLEM!
This is an AGP card, like my old one. I'm at a lost here. I'm about to re-install the old card just so I can get them off my PC. (I took a month off working on thiers so they've been living on mine) 
Any ideas? The MB is Fine, Memory is fine, Power Supply is fine, CPU fine.........
Thanks for listening, I'm open to ideas.

Please don't cross post in the forums, it is very confusing
The 350 watt enermax, what does it say on the sticker on the side of the power supply?
I'm curious to how much the amps are on the +12v rail..
Quote
My quetion now, why would that AGP slot be fine with the old card and overclocking? (sure it was only agp 4x I think, new one is 8x. Dont know what the D.O.T. is......)
Because you are using a card that has higher power requirements for starters, there could be other factors involved, but that would be the first thing I look at. DOT is Dynamic Overclocking Technology and it's integrated in MSI's drivers. I have a sticky topic about it in the VGA section.
Without being able to try the card in another PC, and/or trying a more powerful PSU, the troubleshooting is going to be hampered.
You may consider taking the card to a local shop to see if they can test it for you, and see if the problem follows the card.
I can't count how many times products are RMA'd becuase of the inablity to properly troubleshoot a problem.
I am locking this thread and posting the exact same thing in the other one in the VGA forum here https://forum-en.msi.com/index.php?topic=96306.0 <---This issue was solved, by removing overclock settings (Seargent) in the BIOS.

Similar Messages

  • I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it. help help help please - I have latest version of indesign - thanks

    I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it.
    Is it not possible to create a text box, fill it with dynamic (data driven) text, but make the font size either scale up or down automatically, so that the entire text box is filled? This is a feature in PrintShop Mail Pro called COPY FIT. but no such feature in Indesign??
    help help help please - I have latest version of indesign - thanks, DJ

    lol... it seems to work, but I have another huge problem!
    Apparently .CSV files cannot contain page breaks in the data! The data I am trying to merge is a 'letter', with paragraphs, line breaks, etc.,
    But, after data merging, it ignores page breaks and only merges the first paragraph of each letter. (sigh)
    Solution? Hopefully, an EASY solution. lol as we have thousands of records.
    Is there a third party indesign plugin that will allow .xml, or .xls data merge import??
    Thx,
    DJ

  • This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ag

    I tried to add this in the topic already open but it kept sending me through the unending rabbit holes!
    My question is: How do I figure out what release I was on, get rid of this one and got back to a functional firefox that moves in realtime. I already did all the reset and etc.... I just want to go back to the speed I had. This halting , hanging up misery of a browzer is Sad. I have had firefox for years and always recommended it ..... BUT NOT ANY MORE. I agree with the other poster ... there should be a rollback feature. Peoples time has value and right now FireFox is sucking the value down a rabbit hole.
    See Below Comment Feedback submitted before I finally got here:
    This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ago and it slowed down..... but the latest update before I did the reset really slowed me down. I came here to fix it a couple of dayz ago and did the reset firefox and now it IS RUNNING SO POORLY AND SLOW I AM ABOUT TO KILL IT OFF MY MACHINE!!! Yes that is me yelling - and it happened in SSSSSSSSSSSSS LLLLLLLLL OOOOOOOO WWWWWWWWWW Motion. I have run all the security scans and cleanups ---this needs a fix ASAP!!! PS: The hang ups and slowness is EVERYWHERE I go. I only get speed doing programs not connected to ON LINE.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • If anyone can help i would be hugely grateful, I'm literally pulling my hair out.    I bought the Airport express so i could surf the web and wireless play music through my stereo simultaneously. Can I do this? I've managed to play music wirelessly from m

    If anyone can help i would be hugely grateful, I'm literally pulling my hair out. 
    I bought the Airport express so i could surf the web and wireless play music through my stereo simultaneously. Can I do this? I've managed to play music wirelessly from my macbook to the express/stereo, however i cant surf the web because i can only presume i haven't set up the express to join my sky network.  So therefore the only way to surf the web at the moment is swap wireless devices from express back to my current sky network, then the airplay stops obviously.
    I've tried to join the express to my sky network/netgear router, at face value it looks simple.  The sky network name automatically comes up and then all i have to do is select the correct wireless security which i haven't got a clue which one my sky/netgear router is using, then type in the password which i presume is the network key number on the back of the netgear router?  However its not connecting??  I am doing something wrong?
    Can someone please give me some guidence on how to connect express to my current network?

    and then all i have to do is select the correct wireless security which i haven't got a clue which one my sky/netgear router is using
    Suggest that you ask Sky what type of wireless security that is used on the devices that they provide.
    Once you have that information, you can choose the correct matching setting when you configure the AirPort Express to "join" the Sky wireless network.
    The "password" would be the normal phrase that you use to connect to your wireless network at the present time.

  • Pulling my hair out!!  Ugh!!!! 9.2 is horrible!!!!!!!!

    I can't stand it anymore!! I downloaded 9.2 a week ago and it's been nothing but a nightmare since!! Freeze-ups are the norm, I can't get into the iTunes Store AT ALL, it won't let me complete a back up to DVD, and I can't sync my iPhone!! What the **** is going on here???!!! This version is HORRIBLE!!! Pleae fix it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    > Thanks for responding. Here is the url:
    >
    >
    http://www.martinpaulphotography.com/
    >
    > Martin.
    can't chart out the rowspans and colspans to see where it
    doesn't add up.
    But am sure it doesn't.
    Question: considering there's no real text on that page, it's
    all image
    slices, if you don't want to dig into it to make it right why
    not have it
    one image with hotspots for the links? It's not the right way
    to do it but
    it would look better than it does now.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • K7N2 Delta2 - Barton 3200+ reboots and fails to post with error beep

    I recently upgraded to a K7N2 Delta2 with a 3200+ Barton CPU, 1 GB  Corsair 3200 RAM and a Geforce6600 AGP.  After having numerous power/cooling problems I went out and got an Antec TruePower 430 and installed another fan in the back of the case, after which I still saw insufficient power to the NIC and CPU.  After removing the 6600 and replacing it with my old Geforce 4 Ti 4600, things ran smoothly for a couple of days.  Last night however, (after a particularly long period of gaming) the system shut down and then failed to post, giving me a repeated error beep.  I let it cool down, reset the CMOS jumpers, and swapped out the new RAM with an older Corsair 512 DIMM.  The system posted with "CMOS defaults loaded".  I thought great, it's my RAM, I'll just shut it down, plug everything back in, and game for a couple hours before Circuit City opens.  The second time I tried to boot however, it failed to post, but no error beep this time.

    Did your board come with the d-led bracket and if it did which led's light up with what color and in what sequence? also go into you profile and create a sig listing all system specs similar to mine.
    Try holding down the insert key while you power it up. If it loads, it'll be at default settings and you'll need to reset everything in the bios.
    OOps, just noticed you sig but it still needs all hardware listed including all cd, dvd, and hard drives, how many case fans, etc.

  • Can't get battery to charge - please help before I pull my hair out

    My daughter and I both have the Curve 8530, first, her battery didn't seem to hold a charge very long, then her charging port stopped working.  So we started swapping the batteries.  When hers was low, I would give her mine with more charge and charge up the other one, using it until the first one needed a charge.  That started getting more and more frequent, now, all of the sudden I can't get either one to charge in my phone.  Figured out that hers doesn't charge because it is broken.  We can see a piece of metal that should be on the little tab in the port, laying at the bottom of the port.  Mine is a little loose after 2 years, so I sometimes have to wiggle the connection or make sure I set it down and don't move it when it is charging.  However, this is making me crazy.  It was plugged into my computer usb to charge all night and was completely dead this morning.  Which, is not a big suprise as the usb port on my computer doesn't always like to charge the BB.  Gives me an error saying not enough power.  So I plugged in the wall charger and let it sit.  It gets far enough that it will start the OS, but then sat there for hours and never changed from red and didn't get even 1 bar of charge.  Usually it only take a short time.  I read another post about an internal circular battery under the sticker with all the identification numbers on it, but I don't see any battery resembling that and am not comfortable taking my BB apart like that.  So any suggestions as to what the problem might be?  Or how to fix it?  My daughter's, though she doesn't think so, is not near as important as having at least one battery for mine due to work, etc.  Thanks for reading and any help.
    Jenn

    I would suggest trashing the .itl and .xml files to make sure you start clean (quit iTunes before you trash the files, of course). Then use the Add Folder To Library command and select your iTunes Music folder. That should get everything back into iTunes, though you won't get any playlists back unless you made a backup of them.

  • Help, I am about to pull my hair out, can't get into a locked drive and Time Machine problem

    I've screwed everything up, I think.  I had Time Machine doing backups to an external 500Gig drive and somehow it got locked.  I went into Get Info to try and change the access but it won't allow me.  On top of this problem, my original drive died and I can't get into Time Machine to restore.  When I click "Enter Time Machine", nothing happens.  I created an eDisk and a startup disk to another external drive that I'm using now, but since everything that's been backed up is on the other drive that I can't access.  When I try accessing the drive it gives:  "The folder “G-DRIVE ” can’t be opened because you don’t have permission to see its contents."  I'm not knowledgeable enough to work from the command line, so if I need to do that to access the drive, please walk me though it.  As for the Time Machine problem, I have no idea how to recover anything since it won't even come up, it just sits there.  Outside of blowing my brains out, I don't know what to do.  Any help would be greatly appreciated as I can't afford to take it to Apple to let them try and fix it.

    Hello, not sure how this might affect a TM drive, or not, but...
    Here is what i needed to do for my drive "320GB HD", the last command is just for clean up
    Open Terminal and type these commands carefully with the spaces & change 320GB HD to the name of your drive.
    sudo chflags 0 "/volumes/320GB HD"
    sudo chown root "/volumes/320GB HD"
    sudo chmod 1775 "/volumes/320GB HD"
    sudo -k
    That said, these should be sufficient to do the job:
    sudo chflags 0 "/Volumes/320GB HD"
    sudo chmod a+rx "/Volumes/320GB HD"

  • Lines being printed that don't appear on PDF document created in Illustrator.. Pulling my hair out!

    So here's the story:
    I own a company that designs and sells sewing patterns for men's clothing to be made by home sewers. I have my patterns professionally drafted and sent to me as a poster-sized PDF. I then open it in Illustrator, move things around, change some fonts, etc... and make a 34" wide copy to be printed at a copy shop. That's all fine and dandy, and it prints out perfectly.
    I then use Acrobat XI Pro to open the 34" version and print to Adobe PDF with the poster setting of 7.5" x 10" for people to print at home. Then I open each page of the multi-page PDF in Illustrator to add a border, alignment marks, page numbers, etc... and save as the same PDF.
    Now here is where the weirdness begins. For some reason, there are random chunks of lines (identical to the pattern lines throughout the rest of the document) that aren't supposed to be there. They don't show up on my screen when I open the file in Illustrator or Adobe, but they get printed every time. I've even started the whole process from scratch, tested the 34" wide version at the print shop (prints perfectly), and split it into pages again, and the phantom lines are still there!
    I've attached a photo I took of one of the pages in question. The file on my screen is the exact one I printed, and as you can see, they are definitely not the same
    Can anyone help me? I can send the PDF files in question if need be!
    Oh and if it helps, I have been saving the PDF files as Press Quality from Illustrator. Any other settings/info you need? Thanks very much in advance!

    Yep, it definitely is a complicated workflow... But I'm not really sure of any other way to get from the 34" wide pattern to the home-sewing version which is split into pages and has alignment marks and whatnot. I'm very much an amateur that has figured it out as I went
    I went through the page in the photo pretty thoroughly with the layer panel and I couldn't find any mystery lines... But I did find something interesting; when I click on any of the pattern lines, it shows the whole line of the pattern piece, which extends well past the edge of the artboard. So when I'm printing the poster-sized PDF to 7.5x10 pages, it's keeping all the anchor points of a line even if only a small piece of that is on the actual page.
    Does this help? I've included the page in the photo as well http://www.putlocker.com/file/DADB4759DBB860D8
    Thanks again to everyone!
    Also, should I be keeping all the files I'm editing as .ai files and then only exporting to PDF for the very final product? I was doing that at first, but then using .pdf for the whole process didn't seem to make any difference.

  • I Am At My Wit's End...Going Crazy...Ready To Pull My Hair Out HELP!!!!!!!!

    someone PLEASE help me!
    here is my problem:
    my loop browser likes to delete my loops. they just disappear for no reason....user loops as well as the apple ones. i have my loop folders where i believe is the correct location. but they aren't in the browser. i take that back....every time i open logic, some folders appear, some disappear...i open it again, different ones are there....the ones there the last time are now gone. basically they keep appearing and disappearing....most of them...some have never shown up in the browser. the last time i checked...all i had in there were the ones for the symphony jam pack. i'm afraid next time i open logic none will be there. i keep moving them in and out of the user and apple loop folders thinking that might do something. gah! i just don't know what to do. and god only knows if all the samples and loops i created are anywhere on my computer anymore. oh...and if i try taking the individual folders or files and drag them into the browser, logic freezes. and it doesn't matter anyway because those that i succesfully loaded into the browser that way have also disappeared.
    can someone please please please help me. i am desperate. i have had the most obnoxious day already. i am having all these problems with the computer, my car was towed (not my fault either), i woke up at 3am because i couldn't sleep....i'm just stressed and all i want to do is work on music.
    thank you for your help!
    also...i still haven't arse to register my copy....is it possible that there is some patch that i missing that i would remedy this. i'm just wondering if this a software bug or i just completely lose at the computer.

    maybe it does have to do with other apps. i wish i would have paid attention to when this started occuring so i could narrow down which application might be the culprit.
    the only thing that seems to be working right now is if i take my loop folders out of library/audio. i dragged some to my desktop (don't ask me why i did this) and imported them from there. for some reason they are staying in my loop browser. also when asked where i wanted to put the files, i selected them to go where the rest of the loops are at....in the proper directory. i'm thinking of trying this with all the loops and see what happens. something is corrupted and i'd like to know what and why. i admit, which i am embarrassed about, my computer is a mess. i really need to organise it and all that. actually, i am hoping hoping hoping to get a macbook just for my music. it would make life easier for me seeing i am quickly running out of room on all my hard drives.
    the only loops i am having trouble locating are all the ones i made recently. which i am upset about. but i am sure they are here somewhere. i just need ot wade through the mess to find them.
    thank you for your help.

  • New burning problem....pulling my hair out

    i have burned movies successfully many times. i make them in imovie and then burn via idvd. i just finished one that is 1 hour and 8 minutes long. i chose share -- then idvd to burn. however, when i attempt to burn, and am prompted for a disc, i put it into the drive and it spins for a while, then spits out the disc and i get a message that says "no recordable disc in the drive. insert recordable disc." i have a box of new recordable discs that i have never had a problem with. they are verbatim dvd-r 16x 4.7 gb/120 minutes of video. i keep unwrapping one and trying it -- but i get the same error message and now i have tried unsuccessfully with six new discs. i don't know what to do. the drive seems to be functioning correctly. it reads other dvd's and cd's. anyone have any help, thoughts, suggestions? thanks in advance!

    You may also wish to make sure your Mac is fully ready -- I use MacJanitor (get from VersionTracker) to trigger all the maintenance scripts and then Repair Permissions with Apple's Disk Utility.
    Check to see how much hard disk space you have available; 10-20 gigs is desireable. Also try breaking the burning into two parts as often recommended in these forums -- Save as Disc Image, then use Apple's Disk Utility (or Roxio Toast) to slowly burn the DVD.
    John

  • JNDI: Tomcat 5.0 Pulling My HAIR OUT!

    I am working on a site for someone, and I had it set up and running in my development enviroment on Tomcat 6.0. The user ended up signing for a shared account on GODADDY and they use 5.0.27, so I am reworking some stuff to get this working. For some reason, I can not for the life of me get the Connection Pooling to work with this setup, I can make a direct connection. I truly appreciate any help that someone has, I have been all over the forums, I really don't see where I have anything set incorrectly:
    Here is the top half of the stack trace:
    org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'
         at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:780)
         at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
         at com.garytech.dao.ConnectionPool.getConnection(ConnectionPool.java:35)
         at com.garytech.servlets.Test.doPost(Test.java:51)
         at com.garytech.servlets.Test.doGet(Test.java:35)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.sql.SQLException: No suitable driver
         at java.sql.DriverManager.getDriver(DriverManager.java:243)
         at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:773)
         ... 30 moreHere is the Context XML:
    <?xml version="1.0" encoding="UTF-8"?>
    <Context path="/GaryTech">
         <Resource name="jdbc/garytech" auth="Container" type="javax.sql.DataSource"/>
         <ResourceParams name="jdbc/garytech">
              <parameter>
               <name>factory</name>
               <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
             </parameter>
              <paramater>
                   <name>username</name>
                   <value>######</value>
              </paramater>
              <paramater>
                   <name>password</name>
                   <value>######</value>
              </paramater>
              <paramater>
                   <name>driverClassName</name>
                   <value>com.mysql.jdbc.Driver</value>
              </paramater>
              <paramater>
                   <name>url</name>
                   <value>jdbc:mysql://garytech.db.4239767.hostedresource.com?autoReconnect=true</value>
              </paramater>
         </ResourceParams>
    </Context>Here is the Resource Ref in the web.xml:
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/garytech</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>Here is just some code I threw in a servlet, to show how the direct connection is working and the connection pool is not, the ConnectionPool works fine in other implments, I have not modified that code. The commented out portion works fine, this just kinda was my way of knowing the MySql Driver is working fine and in the correct location. Any ideas PLEASE? :) Thanks!!
              try{
                   String url = "jdbc:mysql://garytech.db.4239767.hostedresource.com";
                   String uName = "";
                   String pwd = "";
                   //Class.forName("com.mysql.jdbc.Driver").newInstance();
                   //Connection connection = (Connection)DriverManager.getConnection(url, uName, pwd);
                   ConnectionPool cp = ConnectionPool.getInstance();
                   Connection connection = cp.getConnection();
                   if(connection != null){
                        System.out.println("connected");
                   connection.close();
              }catch(Exception e){
                   e.printStackTrace();
              }

    Hi Shawn,
    I am going crazy for last 15 days , but not found a solution . I called godaddy people , but no perfect answer . After looking at this thread I got my hopes back . Hopefully you read this message and will reply back.
    I am using godaddy Linux hosting shared environment unlimited with java support .
    I am able to connect to database directly through my JSP or servlet and able to get the result . I mean if I hard code the database connection string,userid and password . But if I use context.xml I am getting null pointer exception on the screen . As per the tomcat configuration install doc if you copy context.xml under META-INF/context.xml It will be picked by tomcat and writes it under conf\Catalina\localhost directory with your jar file name . In shared environment I am not getting a away to check this ..
    Is there any way to check the file copied properly or not to conf\Catalina\localhost directory?
    Or if it doesn't there any other way to implement connection pooling in Godaddy environment?
    and surprisingly the logs what they are asking me to check are under stats directory with error_logs directory . But that doesn't contain much information.Are there any other error logs I can check?
    You mentioned in the above message you were able to check the shared libraries they are hosting. How do I check it?
    Sorry for too many questions , But I am desperate .
    Thanks for your response .
    Regards
    Kiran

  • Want to pull your hair out? Try moving the HD/SD combo shows.

    Seems simple enough, right? You download an HD show on your desktop, which also comes with an SD version for your iPhone/iPod, and you want to put it on your laptop. Ah, things are never as simple as they seem. Try it yourself, or, simply back up your show (both versions), delete it from iTunes, and then try to put it back in your library.
    When you attempt to copy the shows back, only the HD version will copy over. The SD version will not be copied. If you try to manually copy the SD show, it won't. If you try simply moving it to the library on your own, next to the HD version, iTunes won't recognize it.
    There is no obvious or simple way to move or restore a combo HD/SD show. It's easy to move the HD or SD show into your library, but not both so they function as they did when first downloaded from iTunes.
    Has anyone else seen this issue? I was finally able to figure out a method to get it to work, but it's very convoluted and involves multiple steps that aren't intuitive.

    maybe it does have to do with other apps. i wish i would have paid attention to when this started occuring so i could narrow down which application might be the culprit.
    the only thing that seems to be working right now is if i take my loop folders out of library/audio. i dragged some to my desktop (don't ask me why i did this) and imported them from there. for some reason they are staying in my loop browser. also when asked where i wanted to put the files, i selected them to go where the rest of the loops are at....in the proper directory. i'm thinking of trying this with all the loops and see what happens. something is corrupted and i'd like to know what and why. i admit, which i am embarrassed about, my computer is a mess. i really need to organise it and all that. actually, i am hoping hoping hoping to get a macbook just for my music. it would make life easier for me seeing i am quickly running out of room on all my hard drives.
    the only loops i am having trouble locating are all the ones i made recently. which i am upset about. but i am sure they are here somewhere. i just need ot wade through the mess to find them.
    thank you for your help.

  • Had Enough / Pulling My Hair Out

    I am extremely dissatisfied with all my Apple products currently and the issues just seem to get worse and its just getting to the point where I want nothing to do with Apple...
    6-month old £1,500 Macbook Pro Retina - 16GB RAM - 2.8GHz i7
    Doesn't wake up from sleep without restarting and losing anything open
    Connects to a BT Wi-Fi despite deleting all BT networks from my list of preferred networks on a daily occurrence
    Internet sometimes just doesn't work, despite being connected to the Sky Hub and all connection lights working, Safari just freezes and I can see Dropbox has disconnected - although other devices in the house are working fine
    Kicks other devices connected to the Bluetooth speakers off, then cannot play anything to it without constant interruptions
    Continuously told there is a problem with iCloud and have to re-enter my password almost everyday to see there is nothing wrong (as far as I can see)
    Emails are no longer pushed to my Mac, I have to hear the notification on my iPhone then click Get Mail (or wait a few minutes)
    Photoshop CS6 crashes, which I really didn't expect to be a feature on a machine with such high specification
    I cannot connect to shares on my Western Digital NAS
    Calendar refuses to open in full-screen mode despite me always using in full-screen mode and other apps (Mail, Safari) opening in full-screen mode when they have been closed in said mode
    Safari is SOOOO SLOW; difficult to scroll down a page, always restarts and crashes
    Finder opens folders however it see fits, despite having gone through and set the default view for my main folders
    Calls from my iPhone ring on the Macbook for quite a while after I have picked it up on my iPhone (and this is a super pain when the laptop has connected to the speaker and its ringing full blast whilst I am trying to speak to someone)
    2-month old iPhone 6 - 64GB
    Cannot select which folder sent items should be saved to for one of my mail accounts (well I can, but as soon as I navigate away from the screen it goes back to the wrong one)
    Phone crashes for a few seconds when opening any app
    Constantly told there is an iCloud verification issue
    Constantly informed that iCloud Photo Library has not updated for 7 days
    Also that I need to connect to Wi-Fi for iCloud Photo Library to update - whilst actively using Wi-Fi
    Also that iCloud is not signed in and iCloud Photo Library cannot update, then when I go to the settings there is a verification issue
    Takes about 10 seconds for a call to connect (before ringing)
    (Granted, a few years old) Airport Express in the room next to the router
    Cannot play music to it without intermittent interruptions
    Cannot play music if the device being played from is anywhere near the Airport Express or anywhere along the direct line between the Airport Express and the router
    Sometimes can't even connect to it
    ...These are just a few things of the top of my head.
    It's these small things that make it infuriating for me to complete simple tasks and sometimes just make the laptop/phone completely unusable. I would have expected better from something that isn't cheap at all. Maybe I am expecting too much?
    Tempted to bin it all and go back to paper, pen, and landline as it seems nothing with regards to technology goes without mind-numbing interruptions.
    I am sure there is no patch to install that will fix everything, but if you are an Apple expert and know how I might go about fixing just one of the above, I would really appreciate your response.

    Thanks so much for your suggestion...
    I have just been on the phone to Apple who instructed me to reset my SMC and PRAM which seems to have fixed the issue of waking after sleep, but see below for the results of the process...
    Start time: 17:13:19 11/27/14
    Model Identifier: MacBookPro11,1
    System Version: OS X 10.10.2 (14C68m)
    Kernel Version: Darwin 14.1.0
    Time since boot: 7 minutes
    Diagnostic reports
      2014-11-20 WindowServer crash
      2014-11-21 mdworker crash x12
      2014-11-22 com.apple.AmbientDisplayAgent crash
      2014-11-24 discoveryd crash
      2014-11-26 Finder hang
      2014-11-26 discoveryd crash
      2014-11-26 node-webkit Helper crash
      2014-11-27 Last.fm Scrobbler crash
      2014-11-27 Mail hang
      2014-11-27 Preview hang
      2014-11-27 QuickTime Player crash
      2014-11-27 node-webkit Helper crash x3
    Log
      Nov 27 14:16:39 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:16:49 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:16:59 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:17:01 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.355: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
      Nov 27 14:17:01 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.355: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
      Nov 27 14:17:10 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:17:20 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:17:30 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:17:40 com.apple.spindump: Service exited with abnormal code: 75
      Nov 27 14:59:53 failed sending HISTORY_DONE (268435460) to pid 365
      Nov 27 15:48:57 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
      Nov 27 15:48:57 jnl: b(1, 4): replay_journal: from: 40621568 to: 8357376 (joffset 0x1a38b000)
      Nov 27 15:48:57 jnl: b(1, 4): journal replay done.
      Nov 27 15:49:11 utun_start: ifnet_disable_output returned error 12
      Nov 27 15:49:48 com.apple.xpc.launchd.domain.pid.BKAgentService.340: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
      Nov 27 15:49:48 com.apple.xpc.launchd.domain.pid.BKAgentService.340: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
      Nov 27 15:49:52 com.apple.xpc.launchd.domain.pid.MediaLibraryService.343: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
      Nov 27 15:49:52 com.apple.xpc.launchd.domain.pid.MediaLibraryService.343: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
      Nov 27 15:50:11 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.358: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
      Nov 27 15:50:11 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.358: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
      Nov 27 17:02:26 com.apple.iTunesHelper.12244: Service exited with abnormal code: 1
      Nov 27 17:06:01 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
      Nov 27 17:06:14 utun_start: ifnet_disable_output returned error 12
      Nov 27 17:06:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.277: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
      Nov 27 17:06:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.277: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
    Activity
      CPU: user 7%, system 19%
      Net: 9371 in, 249 out (KiB/s)
    CPU per process: WD Sync Service (UID 501) is using 55.7  %
    Memory: kernel_task (UID 0) is using 1171 MB
    kexts
      com.Cycling74.driver.Soundflower (1.6.6)
      cn.phyar.vtDisplayDriver.PhyarStudio (1)
    Daemons
      com.skype.skypeinstaller
      com.oracle.java.JavaUpdateHelper
      com.apple.installer.osmessagetracing
      com.microsoft.office.licensing.helper
      com.google.keystone.daemon
      com.oracle.java.Helper-Tool
      com.adobe.SwitchBoard
      com.adobe.fpsaud
      org.macosforge.xquartz.privileged_startx
      com.westerndigital.WD-Sync-Installer
    Agents
      com.quest.QuestAgent
      com.google.keystone.system.agent
      com.apple.photostream-agent
      org.macosforge.xquartz.startx
      plexus.PLEXUShelper
      com.wdc.WD-Sync-Service
      com.citrix.AuthManager_Mac
      com.oracle.java.Java-Updater
      com.apple.AirPortBaseStationAgent
    Bundles
      /System/Library/Extensions/Soundflower.kext
      - com.Cycling74.driver.Soundflower
      /System/Library/Extensions/vtDisplayDriver.PhyarStudio.kext
      - cn.phyar.vtDisplayDriver.PhyarStudio
      /Library/Audio/Plug-Ins/Components/A52Codec.component
      - com.shepmater.A52Codec
      /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
      - com.AdobeAAMDetectLib.AdobeAAMDetect
      /Library/Internet Plug-Ins/AdobeExManDetect.plugin
      - com.AdobeExManDetectLib.AdobeExManDetect
      /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
      - com.citrix.citrixicaclientplugIn
      /Library/Internet Plug-Ins/Flash Player.plugin
      - N/A
      /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
      - com.oracle.java.JavaAppletPlugin
      /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
      - com.microsoft.sharepoint.browserplugin
      /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
      - com.microsoft.sharepoint.webkitplugin
      /Library/Internet Plug-Ins/Silverlight.plugin
      - com.microsoft.SilverlightPlugin
      /Library/Internet Plug-Ins/Unity Web Player.plugin
      - com.unity.UnityWebPlayer
      /Library/PreferencePanes/Flash Player.prefPane
      - com.adobe.flashplayerpreferences
      /Library/PreferencePanes/Hazel.prefPane
      - com.noodlesoft.Hazel
      /Library/PreferencePanes/JavaControlPanel.prefPane
      - com.oracle.java.JavaControlPanel
      /Library/PreferencePanes/Perian.prefPane
      - org.perian.PerianPane
      /Library/QuickTime/AC3MovieImport.component
      - com.cod3r.ac3movieimport
      /Library/QuickTime/Perian.component
      - org.perian.Perian
      /Library/ScriptingAdditions/Adobe Unit Types.osax
      - N/A
      /Library/ScriptingAdditions/QuestInvader.osax
      - com.quest.QuestInvader.osax
      Library/Address Book Plug-Ins/SkypeABDialer.bundle
      - com.skype.skypeabdialer
      Library/Address Book Plug-Ins/SkypeABSMS.bundle
      - com.skype.skypeabsms
      Library/Caches/com.apple.Safari/Extensions/AdBlock.safariextension
      - com.betafish.adblockforsafari
      Library/Caches/com.apple.Safari/Extensions/Pinterest.safariextension
      - com.pinterest.extension
      Library/Internet Plug-Ins/FacebookVideoCalling.bundle
      - com.skype.FacebookVideoCalling
      Library/iTunes/iTunes Plug-ins/AudioScrobbler.bundle
      - N/A
    App extensions
      com.getdropbox.dropbox.garcon
    Apps
      /Applications/Dropbox.app
    Contents of /etc/ssh_config (checksum 2841432291)
        Host *
          SendEnv LANG LC_*
      Host *
          XAuthLocation /opt/X11/bin/xauth
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
      </dict>
      </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1863372808)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>22</integer>
        <key>Minute</key>
        <integer>42</integer>
        <key>Weekday</key>
        <integer>6</integer>
        </dict>
      </dict>
      ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.quest.QuestAgent.plist (checksum 1116535322)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Label</key>
        <string>com.quest.QuestAgent</string>
        <key>Program</key>
        <string>/Library/Application Support/Quest Software/Agents/QuestAgent.app/Contents/MacOS/QuestAgent</string>
        <key>RunAtLoad</key>
        <true/>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
      </dict>
      </plist>
    Contents of /Library/LaunchAgents/com.wdc.WD-Sync-Service.plist (checksum 2537428734)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Label</key>
        <string>com.wdc.WD-Sync-Service</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/WD Sync/WD Sync Service.app/Contents/MacOS/WD Sync Service</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
      </dict>
      </plist>
    Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist (checksum 2451978492)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Label</key>
        <string>org.macosforge.xquartz.startx</string>
        <key>ProgramArguments</key>
        <array>
        <string>/opt/X11/lib/X11/xinit/launchd_startx</string>
        <string>/opt/X11/bin/startx</string>
        <string>--</string>
        <string>/opt/X11/bin/Xquartz</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>org.macosforge.xquartz:0</key>
        <dict>
        <key>SecureSocketWithKey</key>
        <string>DISPLAY</string>
        </dict>
        </dict>
        <key>ServiceIPC</key>
        <true/>
        <key>EnableTransactions</key>
        <true/>
      ...and 2 more line(s)
    Contents of /Library/LaunchDaemons/com.skype.skypeinstaller.plist (checksum 483910120)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Label</key>
        <string>com.skype.skypeinstaller</string>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/com.skype.skypeinstaller</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.skype.skypeinstaller</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>com.skype.skypeinstaller.socket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/com.skype.skypeinstaller.socket</string>
        <key>SockType</key>
        <string>Stream</string>
        </dict>
      ...and 3 more line(s)
    Contents of /Library/LaunchDaemons/com.westerndigital.WD-Sync-Installer.plist (checksum 192386510)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.westerndigital.WD-Sync-Installer</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.westerndigital.WD-Sync-Installer</st ring>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
      ...and 7 more line(s)
    Contents of /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist (checksum 2883943871)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
        <key>Label</key>
        <string>org.macosforge.xquartz.privileged_startx</string>
        <key>ProgramArguments</key>
        <array>
        <string>/opt/X11/lib/X11/xinit/privileged_startx</string>
        <string>-d</string>
        <string>/opt/X11/lib/X11/xinit/privileged_startx.d</string>
        </array>
        <key>MachServices</key>
        <dict>
        <key>org.macosforge.xquartz.privileged_startx</key>
        <true/>
        </dict>
        <key>TimeOut</key>
        <integer>120</integer>
        <key>EnableTransactions</key>
        <true/>
      </dict>
      </plist>
    Global login items
      /Applications/WD Sync/WD Sync.app
    Proxies
      ProxyAutoConfigEnable : 1
      ProxyAutoConfigURLString : http://wpad/wpad.dat
      ProxyAutoDiscoveryEnable : 1
    Listeners
      kdc: kerberos
      launchd: afpovertcp
      launchd: microsoft-ds
      launchd: ssh
    User login items
      iTunesHelper
      - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
      Dropbox
      - /Applications/Dropbox.app
      HazelHelper
      - /Library/PreferencePanes/Hazel.prefPane/Contents/Resources/HazelHelper.app
      properVOLUME
      - /Applications/properVOLUME.app
      iTouch-Server
      - /Applications/iTouch-Server.app
      BetterSnapTool
      - /Applications/BetterSnapTool.app
      WD Sync
      - /Applications/WD Sync/WD Sync.app
    Safari extensions
      AdBlock
      Pinterest
    Restricted files: 16823
    Lockfiles: 11
    Elapsed time (s): 231

  • Dreamweaver - I want to pull my hair out...

    www.jsquaredconstruction.com
    I'm about ready to scream. I really wish dreamweaver was more
    user friendly, but I get the distinct impression you need to attend
    a year long college course to begin to understand how it works.
    Took me hours to get the frames straightened out, but there
    are two annoying problems - one is that annoying gap between the
    top and bottom frames, and the other is some of the bottom frames
    aren't aligned with the top frames, eventhough both are center
    aligned, both 800 pixels wide.
    Also,
    www.grovehillarabians.com
    - how can I change it such that it doesn't open up a new window
    when you click the first flash animation to enter?

    > I'm about ready to scream. I really wish dreamweaver was
    more user
    > friendly,
    > but I get the distinct impression you need to attend a
    year long college
    > course
    > to begin to understand how it works.
    No matter what the advertisements have led you to believe, DW
    will punish
    you badly if you do not take the time to learn about HTML and
    CSS so that
    you can be comfortable working with code.
    The gap between frames would be fixed by adding
    frameborder="0"
    to your frame tag, e.g.,
    <frame src="top_frame.html" name="topFrame"
    scrolling="No"
    noresize="noresize" id="topFrame" title="topFrame"
    frameborder="0" />
    <frame src="home_frame.html" name="mainFrame"
    bordercolor="#FFFFFF"
    id="mainFrame" title="mainFrame" frameborder="0" />
    The alignment issue comes to you complements of the browser
    when it needs to
    drop a vertical scrollbar in one of the frames, of couse
    throwing the
    alignment off. The only fix would be to force both frames to
    always have a
    vertical scrollbar, which you can by styling each page in
    those frames with
    this CSS rule -
    html, body { min-height:100%;margin-bottom:1px; }
    You REALLY need to not use frames, though. It's rarely the
    optimal choice
    for your layout and will, as a new user, drive you aroud the
    bend, as it
    already seems to be doing. You just have no idea....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "FWP!" <[email protected]> wrote in message
    news:[email protected]...
    > www.jsquaredconstruction.com
    >
    > I'm about ready to scream. I really wish dreamweaver was
    more user
    > friendly,
    > but I get the distinct impression you need to attend a
    year long college
    > course
    > to begin to understand how it works.
    >
    > Took me hours to get the frames straightened out, but
    there are two
    > annoying
    > problems - one is that annoying gap between the top and
    bottom frames, and
    > the
    > other is some of the bottom frames aren't aligned with
    the top frames,
    > eventhough both are center aligned, both 800 pixels
    wide.
    >
    >
    >
    > Also, www.grovehillarabians.com - how can I change it
    such that it doesn't
    > open up a new window when you click the first flash
    animation to enter?
    >

Maybe you are looking for

  • Can I cancel my Creative Cloud membership and still use Photoshop on my computer?

    I have the month-to-month Creative Cloud membership and am curious if I would be able to cancel my Creative Cloud membership and still have access to everything still involved with my Photoshop downloaded onto my computer?

  • How do I make a multiple page pdf?

    Hi I need to put about eight screenshots into one single PDF file.  In other words I want to make an eight page PDF from eight .PNGs. How can I do this?  Is this possible with normal OSX tools like Preview or "Print as PDF"?   Or do I have to drag th

  • How do i clean out caches

    Hello everyone- I am travelling and am away from my 27" Mac *twitch* Anyway, I am working on some edits on my MacBook Pro and I need to clear up some space. I wanted to clear out the cache folder but wanted to be sure what to delete and what to keep

  • Converting Canon 5D Mark II footage after the assembly stage

    I should have done my research ahead of time, but lesson learned. I've got a 19 minute assembly of my short film completed and have already started in on the rough cut, all in the 5D's native H.264 format. The glitchiness on my MBP i7 seemed odd but

  • Installing Windows on a separate partitioned hard drive?

    Hi I have updated my MacBook Pro to 10.5 with Boot Camp. I want to run Windows XP on this computer but I do not want to partition my laptop's hard drive itself. Is their a way I can use my external hard drive instead to run Windows instead of my lapt