Pulling traffic details from WAP4410N Access Point

Hi
I recently got WAP4410N access point and hoped I could count traffic of my home users using syslog (my tenants cost me quite a lot per month).
Here is what the manual says:
Syslog Notification—Syslog is a standard protocol used to capture
information about network activity. The access point supports this protocol
and sends its activity logs to an external server. To enable Syslog, click
Enabled. The default is Disabled.
- Syslog Server IP Address—Enter the IP address of the Syslog server.
In addition to the standard event log, the access point can send a
detailed log to an external Syslog server. The access point’s Syslog
captures all log activities and includes this information about all data
transmissions: every connection source and destination IP address, IP
server, and number of bytes transferred.
I enabled Syslog Notifications and set Syslog Server IP Address to one of the local IPs connected through this AP.
The target PC has win7 installed. I use WinSyslog to save all the incoming logs to a file.
There were no logs recorded till I ticked all the options Administration->Log->Log section in the AP configuration utility.
Now I get records for logins to the configuration utility but nothig else.
Can I get traffic data (source-destination and number of butes transferred) from the AP somehow?
Thanks

Hi Peter, this is a Windows feature (a confusing one at that). On the same Window where the message displays asking for the PIN should say something like "Connect to the network without setting it up". This should take care of that for you.

Similar Messages

WAP4410N Access Point wall-mountable?

Hello everybody,
I have a little question regarding the WAP4410N access point.
Is it possible to mount this access point at a wall or a ceiling?
Are there any little "holes" at the back of the access point for mounting?
Or is there a "mounting-bracket" for this access point?
I've already read the data sheets and documentation for this ap, but found nothing.
Many thanks in advance.
regards,
Kevin

Hi Walter,
Yes ...it can be wall mounted
http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/quick_start/guide/WAP4410N_QuickStartv1.pdf
Cheers!
Rob

Packet drop when clients moving from one Access point to another

HI All ,
I am new to wireless . I am using WS-SVC-WISM-1-K9 wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
Kindly anyone suggest me what all configuration i need to verify on the controller for Proper client roaming so that i can resolve my issues..
Please let me know in case of any explanations requiered .
Thanks in Advance !!!
Regards
Angus

For radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
For pre-shared key, any WPA should be decent enough for roaming speed.
If you're on WEP ... no comment.
If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops.

There is no communication between devices which are connected to Linksys Wireless WAP4410N Access Point ?

Dear all,
     I deployed new Linksys Wireless WAP4410N Access Point and it is working fine. Laptop which is connected to AP can able to access internet. It can able to communicate with AP and also the gateway IP(Router IP) but the issue is wireless devices are not able to communicate between them. In the case LAN device can communicate between wireless devices. Can't able to share files between wireless devices.
     Please help me to troubleshoot this issue. Wat could be the issue over here. Wat step i have to take to clear this issue.
     Advance in thanks.
Thanks and regards,
Chandhuru.M

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
Under Wireless/Security how do you have the Wireless Isolation configured?
Wireless Isolation (within SSID) should be disabled to allow wireless computers associated to the same SSID to see and transfer files between each other
Thanks
Eric Moyers    .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
CCNA, CCNA-Wireless
866-606-1866
Mon - Fri 09:00 - 18:00 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found.

UDP broadcast traffic on port 4554 from Wireless Access Points

Hello,
I am seeing a lot of broadcast traffic coming from my AP541N-A-K9 access points at port 4554/UDP . I have 5 of these in a cluster. I cant seem to find anything in the manual in regards to this port traffic. Any help is apprecieted

Hi
I found this reference for this. As per this it is used for "internal use"
https://www.cisco.com/assets/sol/sb/WAP561_Emulators/WAP561_Emulator_v1.0.4.4/device_info.html
HTH
Rasika
**** Pls rate all useful responses ****

Kin1m- Can't pull DHCP from any Access Point on 2 different phones

I am hoping someone can help us.
I have two kin1m phones, and have recently attempted to use the WIFI connectivity. Browsing works fine via the data plan, however, I blocked the data plan (online), intending to only use WIFI on the phones but cannot get either of the two phones to work via WiFi.
Have have tried two different access points, and everything from OPEN to WEP to WPA2 and both AES and TKIP.
I get connected to the access point just fine, but the only address that is allocated is the DNS server. The IP, subnet, gateway, etc. remain blank or all zeros for about 5 minutes, then it sets a default apipa address in the 169.254.x.x class B range.
This is the same on both phones, so I have a tough time believing this is a defect. Like I said, I have tried both a Linksys WAP4400N (Firmware Version: 1.2.14) and a TrendNet TEW-430APB
Please advise, as my kids are going to DRIVE ME CRAZY over this!
Thanks,
Mr. Kidwhipped

paulbarbee wrote:I tried manually running ¨/etc/rc.d/dhcp4 start¨ but that ...
... But that is a dhcp server, not a client. In other words, you are trying to tell your computer to provide other computers on that public network with IP addresses. Because you did not set your configuration file up to serve that subnet, the server choose to ignore it. This is fortunate, because the owner of that network might not have appreciated that
You want to run dhcpcd, which is a client. You might also try dhclient, a client that sometimes is more forgiving.

WAP4410N access point 4 or 8 digit PIN required by WIN 8.1 network not of router label

I am unable to get my WAP4410N wireless access point connected to my switch with an RJ45 connection to join my network because the 4 or 8 numeric digit PIN required by Win 7 and Win 8.1 is not identifiable on the router label. The network sees the WAP4410N but will not accept any6 of the numbers I put in. I have tried various numbers from the Mac address, serial number and model number, but "network setup" will not accept any of them.

Hi Peter, this is a Windows feature (a confusing one at that). On the same Window where the message displays asking for the PIN should say something like "Connect to the network without setting it up". This should take care of that for you.

WRVS4400Nv2 router and WAP4410N access point

WRVS4400Nv2
Love it! More Bars In More Places! Yahoo and never cuts out...nice job guys worth the money!!!!
bugs
1. Can't find how to set it to use https for access of the admin panel, very puzzling
WAP4410N
bugs
1. WMACFilter.htm&unit=0&vap=0 > Wireless Client List
This needs a To Sort by Client Name, IP Address or MAC Address and it should always list
Select Check box || Client Name || IP Address || MAC Address
but it currently only lists ( this is bad form and looks rushed? )
Select Check box || MAC Address
AND No sort ability
This looks rushed because the partner device the WRVS4400Nv2 as the above functionality.
Doen't look good when the same functions don't work / look the same??
2. WMACFilter.htm&unit=0&vap=0 MAC 20:
If you enter a mac address into MAC 20: and save it it returns blank with the change saved to MAC 19 so it overwrites MAC Address 19 REAL BUG HERE!
A bug in common WAP4410N and WRVS4400Nv2
I will call this a functional bug
The connection control should have an input box with buttons for Add || Edit || Delete and you should enter the MAC Address in and click add and this should populate a read only textarea so you are NOT limited to just 20 client computers. Basically this should work like the Setup_lan.htm in WRVS4400Nv2 Static IP Mapping but instead of doing mapping just add/subtract/edit Mac addresses and you can fit a lot more than 20.
This is a Major limitation considering I paid pretty good money for this router and access point, I should have vertually limited clients
So back to the Setup_lan.htm in WRVS4400Nv2 static IP mapping......I LOVE this feature and the way it was implemented.....NICE JOB GUYS
Genius is not in the understanding of complexity but in its simplification! by R.Ries
Windows defined as 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. by R.Ries
Ban Internet Explorer from your website and force upgrades to real browsers, FF, Opera or other

Hello
Genius is not in the understanding of complexity but in its simplification! by R.Ries
Windows defined as 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. by R.Ries
Ban Internet Explorer from your website and force upgrades to real browsers, FF, Opera or other

SSID only from few Access points

Hi all
I am going to create a new WLAN id/SSID in wireless controller which is Cisco 4402 and once i create it the ssid is going to be pushed to all the access points but i want to broadcast the SSID only to few access points, is there anyway can we do that either in the controller itself or from WCS. please let me know
thanks

Hello,
Yes, you can shape that traffic. Its call Cisco AP Groups. You can simply check the config guide for confi efforts. What code are you on, if you are on 4.2 you can do WLAN Overide.
Hope this helps ...

WAP4410N Access point and 4404 WLAN Controller.

Hello to all,
I am planning to setup a new WLAN using WAP4410N Wireless N Access Point. Is it possible to manage the AP using 4404 WLAN controller ?
I need to buy arround 42 AP for covering the entire building.
Regards,
Aslam

leolaohoo
Could u please tell me which series can be used with 4404 WLANC ?
Also the AP Should support Bridging or Mesh.

Pull User details from Oracle Table (TSS) to OIM

Hi
I am learning OIM so, please excuse if this is a silly question.
I have created a Generic Technology Connector to connect to a user table in oracle database with correct parameters and the GTC was successful. I have done the field mapping between the source table - reconcilation staging and OIM.
Now that I want to see the sample user details that I have stored in the oracle user table from the OIM.
I have assumed that this oracle user table is the Trusted Source System and I have to pull the data from this table to OIM.
So, after creating the connector, what is the next step i need to do so that I see these sample users in the OIM.
I appreciate any help / directions.
Thanks
Sriram

Hi,
You have to do following:
1.Run the GTC schedule task.
2.Go to reconciliation manager and see if reconciliation event is getting generated and event is getting linked.
3.When reconciliation is finished just go to web console.Users->Manage->Search
Please let me know if you have any follow up questions
Regards
Nitesh

CISCO WAP4410N Access Point disconnect after a short while

Dear Sir,
i bought one access point then we configured as Wireless Client/Repeater but wireless connection disconnecting and connecting after a short while
i tried 4 more different ADSL and different IP range ADSL model showing same.
so please advice on this matter ASAP.
Thanks.
Rahmath.CK

My name Eric Moyers. I am an Engineer in the Small Business Support Center.
I am sorry that no one has responded before now. What is the router that you are trying to repeat?
What were the steps you went through to do this?
According to the Admin Guide for the WAP4410N it will only repeat the WRVS4400N and another WAP4410N.
Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.

Capturing MAC Addresses from an Access Point AP1131 with SNMP

Hi!
I'm trying to use SNMP to track information as to whats connected to
our access points. The purpose is basic security and auditing in case
of a problem ( virus, technical problem, etc ). We're already able to
capture what wired devices are connected, but not the MAC addresses of
the wireless clients.
We're employing Cisco Aironet APs 1131, and looking around the MIBs, I found
one object that has what I want, but it's not accessible.
cDot11ClientAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the client."
::= { cDot11ClientConfigInfoEntry 1 }
Does any one know another way to get this information via SNMP?
Thanks U by advance!
Khay

Up...anybody?... :(

WLCCP packets from 3 access points multicasting over 250 packets per second!?!

I've tried to discover why these three access points are sending WLCCP packets at this astonishing rate. I cannot determine when it started, however I believe it is causing many problems. I don't see any configuration items in the running config containing the keyword "wlccp". such as:
AP>(config)# wlccp ?
ap                                  Enable WLCCP AP
authentication-server   Authentication Server
wds                               Enable Wireless Domain Service Manager
wnm                              Configure Wireless Network Manager
Is it implicitly ON? Do I need to do "no wlccp ap" to turn it off.
I desperately need to make this stop?
Anybody have or have seen this phenomenon?

I have stopped the problem by putting tight multicast and broadcast storm control on every switch where an access point ingresses. That cleared up my wireless congestion. But the problem persists. The source MAC of the WLCCP packets are actually specific clients that are attached across the wireless via a work-group bridge. These are IP cameras and Network Video Recorders... why this? Hmmm.... no one knows....

Migration from autonomous access point mode to lightweight mode on 1530

1500 series is not mentioned on:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
Can it actually be upgraded just by changing IOS from APto CAP?

The 1530 should have the image k9w8 alreadyin flash:
Autonomous Mode Configuration
The 1530 Series allows the Unified (controller-based) and Autonomous mode software to be loaded at the factory on the same hardware part number. This eliminates the need for separate part numbers for controller-based units and autonomous mode units.
At boot-up, the default mode is controller-based. The 1530 will power up and begin searching for a controller. Once it joins the controller, it will download the active Unified image from the controller. This is the same operation as other Cisco controller-based APs.
For Autonomous mode, the user should take the following steps:
Step 1 Power the AP and connect to the console.
Step 2 From the Command Line, enter:
AP # capwap ap autonomous (# means privileged EXEC mode)
Step 3 The system will respond with "Convert to Autonomous image. Proceed? (yes/[No]):"
Step 4 Type "yes" to confirm.
Step 5 The AP will then re-boot and load the Autonomous image. The unified image is erased.
Step 6 Once the 1530 has booted in autonomous mode, configuration of the AP can done by following the procedure outlined here:
http://www.cisco.com/en/US/partner/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.html
You can probably issue a dir or show flash: and then if the image is there, you can boot to it.
Example:
config t
boot system flash:/ap3g2-k9w8-mx.v152_4_jb/ap3g2-k9w8-mx.v152_4_jb
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Pulling traffic details from WAP4410N Access Point

Similar Messages

Maybe you are looking for