PulseAudio does not see my card (and I have to use PulseAudio)
ALSA works fine.
To be specific, pavucontrol does not see my card (only sees my ATI HD5700 graphic card as HDMI output under "output")
Here's aplay -l:
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Card info
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Giga-byte Technology Device a002
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Interesting thing that happens:
[bogdan@galaxy alsa]$ aplay -Dplughw:0,0 -fcd Front_Center.wav
aplay: main:660: audio open error: Device or resource busy
The reason I have to use PulseAudio is stupid skype that crashes on start without it installed.
Help?
Yep, that's the one I have installed. However it looks like the problem fixed itself. The sound now works, HOWEVER, I have a 5.1 system and only center, rears, and the sub works. Left and Right (main) don't. pavucontrol is set to 5.1 output. When I turn down the individual volumes of main left and main right, the center speaker is the one that actually is turned down. It's as if PulseAudio thinks that center speaker somehow represents both main left and right.
Similar Messages
-
Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone adviceHi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle -
i was restoring my itouch and after completed, the itouch screen has a "USB arrow to iTunes" picture. Now iTunes does not see the itouch and my itouch is non-responsive
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
I remember that with Snow Leopard you could download them from the Apple website.
Cheers!Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.
-
when I enter a web address, hitting enter does not bring it up. I have to use my mouse and click "go to address" arrow. This only recently started. How do I fix this?
When I open firefox my home page comes right up, but, anything I enter after that does not open by hitting enter.
Please advice,
AnitaProbably caused by an extension that you have installed. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?
I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet. -
Encoder 3.1 on Windows 7 64bit does not see video card
hi
any help or suggestions would be greatly appreciated;
We are running Newtek's VT[5] on a windows machine and have been
very successful running Flash Media Live Encoder 3.1, streaming Live
to a server.
Recently we were upgraded from XP and 32bit to Windows 7 and 64bit;
Now the encoder does NOT see the video, although it recognizes both
the VT video device and VT audio device. My understanding is that
Flash Media Live Encoder 3.1 should run on the operating system
and with Newtek VT[5] (even though the VT capture card is not on Adobe's
official list)
http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.1.pdf
Of course....Adobe wants me to purchase a contract for tier-2 support to answer
the question of whether the encoder will work on our 'new' setup.
again,
any help or suggestions would be greatly appreciated;
calvin tullos
space telescope science institute
[email protected]Are you sure that correct and latest device drivers are installed on that machine?
Please check the video device settings. If FMLE is able to detect the device it should get the signal and work with that. -
I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?
One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all. -
Notebook does not see mPCIe card (asm1061)
Aloha Community,
i am using an old notebook as a small server (cups/ftp/http/etc).
The Notebook is an old Dell Inspiron 1520.
I attached three 3,5'' HDDs to it which are powered via an external PSU.
the first HDD is connected to the original sata-port.
the other two are connected to a ASMedia ASM1061 Sata-controller. This controller sits on a small mPCIe card which i fitted on one of the three mPCIe slot the Notebook offers me (i tried all three).
In Bios all mPCIe-Slots are activated, still the OS does not see the HDDs.
also lspci seems not to see the card. Any ideas?
arne in ~/ > su arne
Passwort:
+ OS: Arch Linux x86_64
# Hostname: Yoshi
### Kernel Release: 3.19.0-gbdccc4e
##### Machine Hardware name: x86_64
###### Uptime: 0:26
; #####; Packages: 1257
+##.##### Processor Type: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
+########## Root: 572G / 917G (62%) (ext4)
###############+
.######; ;###;`".
#########. .########`
#' `#
[arne@Yoshi ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[arne@Yoshi ~]$
hope you guys can help me!
greetings
Last edited by arch-serv (2015-02-14 00:46:53)that's the problem i guess... according to the bios settings all mPCIe slots are enabled, still the card does not show up.
arne in ~/ > lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1,9M 0 part
└─sda2 8:2 0 931,5G 0 part /
arne in ~/ > sudo dmesg | grep -i sata
[sudo] password for arne:
[ 0.511917] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.524037] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 26
[ 0.524043] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 26
[ 0.843388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.843416] ata3: SATA link down (SStatus 0 SControl 300)
arne in ~/ >
even without the correct drivers the card shoud show up in the output of lspci shouldn't it?
greetings -
Final Cut 10.1 does not see my desktop and clips in timeline do not appear in library
Final Cut 10.1.1 does not see my desktop in the import window. Problem is intermittent. Frequent crashes. And clips that are being used in a project do not appear in library browser. Any help?
Using MXF files with proper file structure.
Late 2012 fusion drive iMac.
Mavericks 10.9.2
No hardware issues found in MRI from Tekserve
Final Cut is frequently giving beach ball "program not responding"In the Devices sidebar, click on your HD; in the import widow, nagigate to Users>your account>Desktop and drag that into the Favorites sidebar.
As to your beachballs and crashes, take a look at these troubleshooting tips.
Russ -
Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99
My EOS 350d has not worked since it was shipped to my daughter. Bought new memory card and camera still does not recognize that a card is in it. When connected to computer I could see card but it had 0 used memory and 0 memory available. Now it does not show at all. Using canon software get same response--no memory card. Have tried with two different memory cards. Even formatted one card on PC, still nothing. Any ideas what to try next--pins look like they are all in correct place.
Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support. -
OEL6.1 in VM manager does not see network card
I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.
I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
I then used the create new Virtual Machine and selected the server pool.
I selected the ISO file with OEL 6.1.
I gave it a name, memory size, console password.
Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device. -
My iPad does not see any network and i cannot get to place to enter manually IP address etc.
I have several apple products connected on home wi-fi network. On my ipad, it does not even see the network. I would put IP etc in manually but I cannot get to that page to do it. Where is it?
Settings>WiFi>Other. Enter your network name and password.
Have you tried .... Settings>WiFi>Tap your network name>Tap the blue arrow on the right>Forget this network. Restart your iPad then go back to the WiFi settings and try again? -
HP Slate 7 does not see SD card after update
My tablet also just installed Android update and it will no longer recognize the SD card. I tried another SD card and it also is not recognized.Tablet model is Slate 7 4601It shows Android version now as 4.1.1Build number HP_slate v1.05.17_userI have my music and some movies on the sd card and it always worked flawlessly before the update.i also Tried to reboot,but nothings happen pls help.Any siggestions? Is HP listening? It sounds like others have suffered the same issue, pls make an action...many of us suffered same issue....
Hi!, djaulbryan: Your problem is the same what many users, in tablets with OS Android 4.1.1, when actualized compilation number v1.05.17_user. You can download and install the apk File Manager HD, for use Cloud, FTP (File TRansfer Protocol), LAN, etc ... HP know this problem and IMHO, this problem, will be solved, soon.
-
my apple tv and my macbook share the same e-mail address type login. I have been into itunes and set to allow home sharing. my devices do not see each other. Any ideas?
Have you enabled home-sharing on the ATV?
See if this helps
http://support.apple.com/kb/TS2972?viewlocale=en_US&locale=en_US
Maybe you are looking for
-
Hi! I have a 5.5-year-old Macbook4.1, and I've been having problems with the display. I googled the problem and found out that I've got a wonky inverter cable. Apparently, the part itself is relatively cheap, but the labor (which involves taking n
-
Unable to convert the file name in Target directory
Dear Experts, Currently iam facing a problem with some files.my interface is a File to file .As per the interface the sender will pick the flatfiles from source directory which the file name was BNP_NE201.txt once my file reached to target directory
-
Using and loading newer java classes...
Hi, I am trying to use a feature from the newest release of java in my application. Is it possible to find the exact class files within the jre and just put them amongst my application's classes? For example if I were to take the new transparency fea
-
Hi! I have i iMac that i would like to run as a Kiosk with Safari. Got i all set up via parental controls but there is one thing left; I would like to close all Safari windows and tabs and reopen the home page, after 5 min of inactivity (idle). This
-
How to delete a incomplete movie download
How to delete a incomplete movie download