Pulseaudio glitching on mute
When I press the mute button on my keyboard, there is a painfully loud burst of static. I'm using the optical output, so it's not related to some crappy internal soundcard noise. I've also added "load-module module-udev-detect tsched=0" to my /etc/pulse/default.pa file, based on the wiki: https://wiki.archlinux.org/index.php/Pu … _crackling
Any suggestions?
Thanks
Is this only pulseaudio related or does also happen with playing sound through alsa directly? If yes, then look into alsa drivers for your card and/or external hardware issues. If no, look what command you are using when pressing mute key. Run it in a terminal, maybe some error shows up. Maybe pulseaudio (or something along the signal path) does not wait for end of buffer and quits stream abruptly.
Similar Messages
-
Hello!
When i listen to music on Spotify and another program starts playing a sound, for example when someone goes online on skype, the volume suddenly spikes and it becomes very loud.
It scares me a lot and sounds pretty bad, but I have no idea what the problem is. Has anyone experienced anything similar?
Thanks
Last edited by Krarl (2013-05-24 15:13:05)Thanks lucke, disabling flat volumes did it. Now it crackles when i change the volume in Spotify, but it's still better than before.
-
[Solved]No sound anymore (ALSA/PulseAudio)
Ok so I have no idea why I have no sound anymore, I didn't install anything...
Anyway, that's what I've tried:
-Check if mixer are all up in alsamixer
-Try to play a bit with pavucontrol
-Reboot
-Rerun pulseaudio with verbose
-Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
-Googgling and searching this forum
Here are some more info
Pulseaudio logs:
└┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
E: [pulseaudio] main.c: Failed to kill daemon: No such process
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session c1"
D: [pulseaudio] module-systemd-login.c: Added new session c1
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
-I see the mixer going up and down in pavucontrol if I play some music
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
└┼─$─┤▶ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
└┼─$─┤▶ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, CX20590 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
Don't really know what else to provide...
About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
Thank you
Last edited by Truc (2014-04-19 13:15:28)└┼─$─┤▶ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
└┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
speaker-test 1.0.27.2
Playback device is plughw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -16,Device or resource busy
It says it's busy but I don't see anything that could use it. I quit skype before trying -
Game recording issues with ffmpeg
Hello, I'm trying to create a script to record windowed games with ffmpeg.
This is what I have so far:
#!/bin/sh
INFO=$(xwininfo -frame)
WIN_GEO=$(echo $INFO | grep -oEe 'geometry [0-9]+x[0-9]+' | grep -oEe '[0-9]+x[0-9]+')
WIN_XY=$(echo $INFO | grep -oEe 'Corners:\s+\+[0-9]+\+[0-9]+' | grep -oEe '[0-9]+\+[0-9]+' | sed -e 's/+/,/' )
ffmpeg -f x11grab -y -r 60 -s $WIN_GEO -i :0.0+$WIN_XY -f alsa -i pulse -crf 18 -preset ultrafast -threads 8 -async 5000 $1.mkv
It allows me to click on a window and record it - it works, but has some issues:
> I manually have to redirect the game audio with pavucontrol to be able to record it
> Audio gets out of sync, I tried many options with no luck
> I can't find a way to record both game audio and microphone audio
So,
> Could the script be improved somehow for better quality/performance?
> How can I prevent the audio going out of sync?
> How can I record both game video, game audio and microphone audio at the same time?
Thanks.SuperV1234 wrote: > I manually have to redirect the game audio with pavucontrol to be able to record it
Usually, PulseAudio will remember the last used device. Once you run ffmpeg once, PA should remember that it listened on the monitor input and use that.
SuperV1234 wrote: > Audio gets out of sync, I tried many options with no luck
I got this problem too a while back. Try removing the -async option, it's deprecated and caused more trouble than I had. Also, make sure you always have enough processing power to process everything in time, otherwise it will become out of sync quickly. ffmpeg isn't smart enough yet to fill the gaps, so if you can't grab the audio fast enough (pulseaudio glitch), can't encode the video fast enough 100% of the time, or anything else, it will lose frames and result in a delay. Even funnier, also make sure the drive you output to is fast enough to save the file so ffmpeg never block on writing the file to disk (I used to send my encode directly to a streaming server, and the network latency messed it up).
SuperV1234 wrote: > I can't find a way to record both game audio and microphone audio
You can set this up easily with either PA or Jack. Jack is a bit easier to use, but here's the way I do it myself:
- Create a dummy output device (module-null-sink)
- Use a loopback to play your microphone in the dummy output (module-loopback)
- Use a loopback to play your sound card monitor into the dummy output (module-loopback again)
- Make ffmpeg record from the monitor of the dummy output.
You can also juste encode 2 audio streams using ffmpeg (-f alsa -i pulse twice, or -f pulse -i "your pulseaudio input") and edit it after.
I think jack would use less CPU to do the same thing (audio streams are piped and mixed directly in the right place instead of using loopbacks and dummy outputs)
SuperV1234 wrote: > Could the script be improved somehow for better quality/performance?
- Unless you really want 60 FPS output, I'd suggest reducing the FPS to 30. Keep the 60 FPS input, but output into 30 FPS. It will use half the processing power and there will be almost no noticable difference.
- If you really want 60 FPS output and know how it will be displayed, you can actually encode in interlaced video (60i), which looks like 60 FPS but weights about the same as 30 FPS.
- You can increase the quality, using something like -preset fast or even -preset medium given you have enough spare processing. Remember, encoding speed should be constant. If you record 30 FPS, you have to output 30 FPS all the time!
- Like said by skottish, try not using CFR. It will cause the encoder to have to spend more time one some frames and this extra processing might be enough to cause FPS drop.
- Tune your x264 options (-x264args). Options reference
- Try reducing the number of threads: make room for your game and give a ffmpeg as few cores as possible. using 8 cores will make it have full processing power, but there are some cases where your game will have CPU spikes and ffmpeg will wait for a single thread to finish a frame and get out of sync. They will be rescheduled to another core, but this has some overhead, and x264 encoding uses the CPU cache a lot with inline assembler code. Having as few context switch as possible for ffmpeg is preferable over having two ffmpeg threads encoding on the same CPU.
I hope this helps you a bit. Unfortunately, ffmpeg is still pretty bad at recording because of audio/video sync issues In the end, there will always be sync issues after a while, so I suggest you restart ffmpeg once in a while. I opened a bug on their tracker a while ago about similar issues. Never got any attention, no comment, not even moved from new to open. They need to fix the input buffer size in a way they always grab exactly N frames of video and audio. They seem to use some timecodes but it looks like the muxer often fails to resync them back. I'd fix it myself, but ffmpeg is way too big for me to find what I need, especially for a bug that seem to have existed forever and still not being fixed or even addressed.
Last edited by Max-P (2013-07-22 19:16:12) -
How to disable auto mute in pulseaudio?
I'm going to listen to some music with my computer from my phone via Bluetooth, so I have to use pulseaudio, but I have a problem. My laptop's sound system is so weird, it must have Headphone and Speaker both un-muted in alsamixer to make internal speaker having sound, So I comment "load-module module-switch-on-port-available" in /etc/pulse/default.pa, this stopped mute/un-mute headphone/speaker when I plug in/unplug my earphone, but pluseaudio auto mute the Headphone and set volume to 0 every time when I reboot he computer(the Speaker is set as fallback in pavcontrol), I have to un-mute it and increase volume from alsamixer so that internal speaker can have sound, so is there any way to stop pusleaudio auto muting?
Anyone got any ideas?
-
When I flick the side switch on my iPad Mini It shows the Volume was muted on the screen then it starts flickering between muted and not muted on my screen, and I can't stop the flickering unless I un-mute it, but it goes away eventually. Please help me.
Try one of the first step troubleshooting steps for any weird issues that occur on your iPad. Reboot and see what happens.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
[Solved]Alsa/pulseaudio going mute
Logging out/in with awesome/slim seems to have audio at first, but after awhile ssems to switch to pulseaudio, but then pulseaudio fails to recognize audio hardware as anything but dummy output.
Last edited by nomorewindows (2014-06-07 00:48:57)emeres wrote:fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: <user> xxxx F.... plugin-containe
/dev/snd/pcmC0D0p: <user> xxxx F...m plugin-containe
/dev/snd/timer: <user> xxxx f.... plugin-containe
Looks like to me that plugin-container is the problem.
emeres wrote:
That would be probably flash. What if you kill plugin-container?
fuser -v /dev/snd/*
pkill -9 plugin-container
It goes away with exiting firefox and nothing shows up with
fuser -v /dev/snd/*
when the failure occurs. No applications with sound work, and fuser doesn't show anything.
Last edited by nomorewindows (2014-06-07 00:28:19) -
[solved] No sound, ALSA finds soundcard, pulseaudio does not.
Problem:
pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
First appeared when:
Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
What did not help:
Reinstalling packets with pulse|alsa|sound|audio in its name.
Deleting ${HOME}/.pulse* .
Rebooting.
Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
Adding or removing my user to the audio group.
Googling. Other threads i this forum.
Additional infos:
(Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
/dev/dsp does not exist.
fuser -v /dev/snd/* returns nothing
aplay whatever.wav produces no sound.
aplay -D sysdefault whatever.wav works.
Using Gnome 3 started with gdm.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC272 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
[ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
[ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
[ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
[ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
[ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
[ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
[ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
[ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
[ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
[ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
[ 0.000000] On node 0 totalpages: 751850
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11696 pages used for memmap
[ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
[ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
[ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
[ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12058624 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1296.696 MHz processor
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003400] Security Framework initialized
[ 0.003407] AppArmor: AppArmor disabled by boot time parameter
[ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008132] Mount-cache hash table entries: 256
[ 0.008498] Initializing cgroup subsys cpuacct
[ 0.008503] Initializing cgroup subsys memory
[ 0.008517] Initializing cgroup subsys devices
[ 0.008520] Initializing cgroup subsys freezer
[ 0.008522] Initializing cgroup subsys net_cls
[ 0.008525] Initializing cgroup subsys blkio
[ 0.008570] CPU: Physical Processor ID: 0
[ 0.008572] CPU: Processor Core ID: 0
[ 0.008575] mce: CPU supports 6 MCE banks
[ 0.008587] CPU0: Thermal monitoring enabled (TM2)
[ 0.008592] process: using mwait in idle threads
[ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.010851] ACPI: Core revision 20120711
[ 0.016699] ftrace: allocating 18348 entries in 72 pages
[ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063329] ... version: 2
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100007] smpboot: Booting Node 0, Processors #1 OK
[ 0.113162] Brought up 2 CPUs
[ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
[ 0.113436] devtmpfs: initialized
[ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
[ 0.121465] NET: Registered protocol family 16
[ 0.121699] ACPI: bus type pci registered
[ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.174683] PCI: Using configuration type 1 for base access
[ 0.175619] bio: create slab <bio-0> at 0
[ 0.175619] ACPI: Added _OSI(Module Device)
[ 0.175619] ACPI: Added _OSI(Processor Device)
[ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178073] ACPI: EC: Look up EC in DSDT
[ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188671] ACPI: Dynamic OEM Table Load:
[ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189399] ACPI: Dynamic OEM Table Load:
[ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190407] ACPI: Dynamic OEM Table Load:
[ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190693] ACPI: Dynamic OEM Table Load:
[ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190715] ACPI: Interpreter enabled
[ 0.190715] ACPI: (supports S0 S3 S4 S5)
[ 0.190715] ACPI: Using IOAPIC for interrupt routing
[ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.323314] ACPI: No dock devices found.
[ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323314] PCI host bridge to bus 0000:00
[ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.323314] DMAR: Forcing write-buffer flush capability
[ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
[ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
[ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
[ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
[ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
[ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
[ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.326109] pci 0000:08:00.0: supports D1 D2
[ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
[ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
[ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
[ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
[ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.327093] pci 0000:20:00.0: supports D1 D2
[ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
[ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.336689] vgaarb: loaded
[ 0.336691] vgaarb: bridge control possible 0000:00:02.0
[ 0.336769] PCI: Using ACPI for IRQ routing
[ 0.348092] PCI: pci_cache_line_size set to 64 bytes
[ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
[ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
[ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
[ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
[ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
[ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
[ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
[ 0.348791] NetLabel: Initializing
[ 0.348794] NetLabel: domain hash size = 128
[ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.348816] NetLabel: unlabeled traffic allowed by default
[ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.370000] Switching to clocksource hpet
[ 0.381464] pnp: PnP ACPI init
[ 0.381496] ACPI: bus type pnp registered
[ 0.382022] pnp 00:00: [bus 00-ff]
[ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.440057] pnp 00:01: [io 0x0000-0x001f]
[ 0.440061] pnp 00:01: [io 0x0081-0x0091]
[ 0.440065] pnp 00:01: [io 0x0093-0x009f]
[ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
[ 0.440072] pnp 00:01: [dma 4]
[ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.440353] pnp 00:03: [io 0x00f0]
[ 0.440369] pnp 00:03: [irq 13]
[ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440433] pnp 00:04: [io 0x002e-0x002f]
[ 0.440436] pnp 00:04: [io 0x0061]
[ 0.440439] pnp 00:04: [io 0x0063]
[ 0.440443] pnp 00:04: [io 0x0065]
[ 0.440446] pnp 00:04: [io 0x0067]
[ 0.440449] pnp 00:04: [io 0x0070]
[ 0.440452] pnp 00:04: [io 0x0080]
[ 0.440456] pnp 00:04: [io 0x0092]
[ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.440462] pnp 00:04: [io 0x0480-0x048f]
[ 0.440466] pnp 00:04: [io 0xffff]
[ 0.440469] pnp 00:04: [io 0xffff]
[ 0.440472] pnp 00:04: [io 0x0400-0x047f]
[ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
[ 0.440479] pnp 00:04: [io 0xfe00]
[ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
[ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.440578] system 00:04: [io 0xffff] has been reserved
[ 0.440583] system 00:04: [io 0xffff] has been reserved
[ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.440596] system 00:04: [io 0xfe00] has been reserved
[ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
[ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440620] pnp 00:05: [io 0x0070-0x0077]
[ 0.440629] pnp 00:05: [irq 8]
[ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440691] pnp 00:06: [io 0x0060]
[ 0.440694] pnp 00:06: [io 0x0064]
[ 0.440703] pnp 00:06: [irq 1]
[ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.440772] pnp 00:07: [irq 12]
[ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
[ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441356] pnp: PnP ACPI: found 9 devices
[ 0.441359] ACPI: ACPI bus type pnp unregistered
[ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
[ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
[ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
[ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
[ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
[ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450219] NET: Registered protocol family 2
[ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.456888] TCP: reno registered
[ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.457123] NET: Registered protocol family 1
[ 0.457150] pci 0000:00:02.0: Boot video device
[ 0.457669] PCI: CLS 64 bytes, default 64
[ 0.457746] Unpacking initramfs...
[ 0.626300] Freeing initrd memory: 4636k freed
[ 0.628543] Simple Boot Flag at 0x3e set to 0x1
[ 0.629045] audit: initializing netlink socket (disabled)
[ 0.629069] type=2000 audit(1354288244.626:1): initialized
[ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.651510] VFS: Disk quotas dquot_6.5.2
[ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.651831] msgmni has been set to 5759
[ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.652204] io scheduler noop registered
[ 0.652208] io scheduler deadline registered
[ 0.652301] io scheduler cfq registered (default)
[ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.653107] intel_idle: does not run on family 6 model 23
[ 0.653156] GHES: HEST is not enabled!
[ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.653953] Linux agpgart interface v0.103
[ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.669294] mousedev: PS/2 mouse device common for all mice
[ 0.670409] rtc_cmos 00:05: RTC can wake from S4
[ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.670648] cpuidle: using governor ladder
[ 0.670651] cpuidle: using governor menu
[ 0.670829] drop_monitor: Initializing network drop monitor service
[ 0.670946] TCP: cubic registered
[ 0.671122] NET: Registered protocol family 10
[ 0.671359] NET: Registered protocol family 17
[ 0.671373] Key type dns_resolver registered
[ 0.671720] PM: Hibernation image not present or could not be loaded.
[ 0.671743] registered taskstats version 1
[ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
[ 0.674872] Freeing unused kernel memory: 772k freed
[ 0.675168] Write protecting the kernel read-only data: 8192k
[ 0.682434] Freeing unused kernel memory: 1408k freed
[ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.685881] Freeing unused kernel memory: 568k freed
[ 0.698116] systemd-udevd[43]: starting version 195
[ 0.701918] SCSI subsystem initialized
[ 0.703991] ACPI: bus type scsi registered
[ 0.704082] libata version 3.00 loaded.
[ 0.705773] ahci 0000:00:1f.2: version 3.0
[ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.708617] scsi0 : ahci
[ 0.709413] scsi1 : ahci
[ 0.709823] scsi2 : ahci
[ 0.710229] scsi3 : ahci
[ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
[ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
[ 0.710367] ata3: DUMMY
[ 0.710370] ata4: DUMMY
[ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
[ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.200123] ata1.00: configured for UDMA/133
[ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
[ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
[ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
[ 1.213590] ata2.00: applying bridge limits
[ 1.229911] ata2.00: configured for UDMA/100
[ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
[ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.273864] ACPI: bus type usb registered
[ 1.273912] usbcore: registered new interface driver usbfs
[ 1.273946] usbcore: registered new interface driver hub
[ 1.273996] usbcore: registered new device driver usb
[ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
[ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.286950] hub 1-0:1.0: USB hub found
[ 1.286958] hub 1-0:1.0: 6 ports detected
[ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
[ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.300266] hub 2-0:1.0: USB hub found
[ 1.300273] hub 2-0:1.0: 6 ports detected
[ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.301506] hub 3-0:1.0: USB hub found
[ 1.301513] hub 3-0:1.0: 2 ports detected
[ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.301997] hub 4-0:1.0: USB hub found
[ 1.302004] hub 4-0:1.0: 2 ports detected
[ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.302434] hub 5-0:1.0: USB hub found
[ 1.302441] hub 5-0:1.0: 2 ports detected
[ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.302824] hub 6-0:1.0: USB hub found
[ 1.302833] hub 6-0:1.0: 2 ports detected
[ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.303759] hub 7-0:1.0: USB hub found
[ 1.303766] hub 7-0:1.0: 2 ports detected
[ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.304881] hub 8-0:1.0: USB hub found
[ 1.304888] hub 8-0:1.0: 2 ports detected
[ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.330105] [drm] Initialized drm 1.1.0 20060810
[ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.334889] ACPI: Lid Switch [LID0]
[ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.335086] ACPI: Power Button [PWRB]
[ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.335196] ACPI: Power Button [PWRF]
[ 1.341526] i915 0000:00:02.0: setting latency timer to 64
[ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.415008] [drm] Driver supports precise vblank timestamp query.
[ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
[ 1.630036] Switching to clocksource tsc
[ 2.030864] fbcon: inteldrmfb (fb0) is primary device
[ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.574662] Console: switching to colour frame buffer device 170x48
[ 2.579271] fb0: inteldrmfb frame buffer device
[ 2.579273] drm: registered panic notifier
[ 2.680113] acpi device:07: registered as cooling_device0
[ 2.780104] acpi device:08: registered as cooling_device1
[ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.963907] device-mapper: uevent: version 1.0.3
[ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
[ 9.679599] XFS (dm-0): Mounting Filesystem
[ 9.807350] XFS (dm-0): Ending clean mount
[ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
[ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.845393] systemd[1]: Starting Login Prompts.
[ 11.845414] systemd[1]: Reached target Login Prompts.
[ 11.845429] systemd[1]: Starting Arch Daemons.
[ 11.845447] systemd[1]: Reached target Arch Daemons.
[ 11.845462] systemd[1]: Starting Remote File Systems.
[ 11.845481] systemd[1]: Reached target Remote File Systems.
[ 11.845496] systemd[1]: Starting Syslog Socket.
[ 11.845558] systemd[1]: Listening on Syslog Socket.
[ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.845766] systemd[1]: Starting udev Kernel Socket.
[ 11.845804] systemd[1]: Listening on udev Kernel Socket.
[ 11.845885] systemd[1]: Starting udev Control Socket.
[ 11.845927] systemd[1]: Listening on udev Control Socket.
[ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
[ 11.846175] systemd[1]: Expecting device dev-sda8.device...
[ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
[ 11.846210] systemd[1]: Expecting device dev-sda6.device...
[ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
[ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
[ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
[ 11.846368] systemd[1]: Starting Journal Socket.
[ 11.846439] systemd[1]: Listening on Journal Socket.
[ 11.846467] systemd[1]: Started File System Check on Root Device.
[ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.850382] systemd[1]: Mounting Temporary Directory...
[ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
[ 12.026864] systemd[1]: Mounting Huge Pages File System...
[ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
[ 12.156149] systemd[1]: Starting Load Kernel Modules...
[ 12.173525] systemd[1]: Mounting Debug File System...
[ 12.186770] systemd[1]: Starting Setup Virtual Console...
[ 12.484840] systemd[1]: Starting Apply Kernel Variables...
[ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
[ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
[ 12.636850] systemd[1]: Starting Journal Service...
[ 12.646587] systemd[1]: Started Journal Service.
[ 12.646650] systemd[1]: Starting Syslog.
[ 12.646684] systemd[1]: Reached target Syslog.
[ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
[ 12.647816] systemd[1]: Mounted Temporary Directory.
[ 12.647972] systemd[1]: Mounted Huge Pages File System.
[ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.653654] systemd[1]: Mounted Debug File System.
[ 12.653705] systemd[1]: Starting Local File Systems (Pre).
[ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
[ 12.653749] systemd[1]: Starting Load Random Seed...
[ 12.705203] FS-Cache: Loaded
[ 12.740616] RPC: Registered named UNIX socket transport module.
[ 12.740621] RPC: Registered udp transport module.
[ 12.740624] RPC: Registered tcp transport module.
[ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.881473] systemd-udevd[162]: starting version 196
[ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
[ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
[ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
[ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
[ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.330974] lib80211: common routines for IEEE802.11 drivers
[ 14.330979] lib80211_crypt: registered algorithm 'NULL'
[ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 14.709327] ACPI: Requesting acpi_cpufreq
[ 14.714946] Monitor-Mwait will be used to enter C-1 state
[ 14.714973] Monitor-Mwait will be used to enter C-2 state
[ 14.714989] Monitor-Mwait will be used to enter C-3 state
[ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.715031] ACPI: acpi_idle registered with cpuidle
[ 14.720557] Switching to clocksource hpet
[ 14.757813] wmi: Mapper loaded
[ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
[ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 15.417769] iTCO_vendor_support: vendor-support=0
[ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
[ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
[ 15.585549] Disabling lock debugging due to kernel taint
[ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
[ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
[ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.108446] Linux media interface: v0.10
[ 16.120558] Linux video capture interface: v2.00
[ 16.169228] usbcore: registered new interface driver uas
[ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
[ 16.316308] Initializing USB Mass Storage driver...
[ 16.316609] usbcore: registered new interface driver usb-storage
[ 16.316613] USB Mass Storage support registered.
[ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
[ 16.328873] usbcore: registered new interface driver uvcvideo
[ 16.328876] USB Video Class driver (1.1.1)
[ 16.779720] usb 2-4: USB disconnect, device number 2
[ 16.783629] scsi4 : usb-storage 2-4:1.0
[ 16.783773] usbcore: registered new interface driver ums-realtek
[ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
[ 21.656824] XFS (dm-1): Mounting Filesystem
[ 21.839619] XFS (dm-1): Ending clean mount
[ 21.940898] systemd-journald[163]: Received SIGUSR1
[ 28.055735] r8169 0000:20:00.0: eth0: link down
[ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.875645] Bluetooth: Core ver 2.16
[ 28.875677] NET: Registered protocol family 31
[ 28.875680] Bluetooth: HCI device and connection manager initialized
[ 28.875684] Bluetooth: HCI socket layer initialized
[ 28.875687] Bluetooth: L2CAP socket layer initialized
[ 28.875695] Bluetooth: SCO socket layer initialized
[ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.807702] fuse init (API version 7.20)
[ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
lsmod
Module Size Used by
fuse 69173 2
michael_mic 2074 8
arc4 2039 4
ecb 2105 0
bnep 8857 2
bluetooth 192120 7 bnep
snd_seq 50881 1
snd_seq_device 5268 1 snd_seq
ums_realtek 7391 0
usb_storage 47384 1 ums_realtek
uvcvideo 72787 0
videobuf2_vmalloc 2468 1 uvcvideo
uas 11119 0
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
media 10405 2 uvcvideo,videodev
i2c_i801 9571 0
joydev 9991 0
coretemp 6070 0
kvm_intel 124749 0
lib80211_crypt_tkip 7738 0
wl 2558087 0
kvm 373917 1 kvm_intel
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
dell_wmi 1485 0
acpi_cpufreq 5933 1
lpc_ich 10609 0
ac 2536 0
mperf 1267 1 acpi_cpufreq
sparse_keymap 3056 1 dell_wmi
battery 6773 0
wmi 8379 1 dell_wmi
dell_laptop 8787 0
processor 26855 3 acpi_cpufreq
evdev 10266 12
psmouse 71909 0
serio_raw 4689 0
dcdbas 5520 1 dell_laptop
lib80211 3949 2 wl,lib80211_crypt_tkip
microcode 12377 0
cfg80211 177108 1 wl
rfkill 15604 5 cfg80211,bluetooth
snd_hda_codec_hdmi 24487 1
snd_hda_codec_realtek 61193 1
snd_hda_intel 26180 3
snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6428 1 snd_hda_codec
snd_pcm_oss 38992 0
snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 3 snd_pcm,snd_seq
snd_mixer_oss 15347 1 snd_pcm_oss
snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
soundcore 5442 1 snd
pcspkr 1899 0
r8169 56839 0
mii 4091 1 r8169
nfs 127007 0
lockd 64904 1 nfs
sunrpc 186092 2 nfs,lockd
fscache 40995 1 nfs
ablk_helper 1972 0
cryptd 8741 1 ablk_helper
aes_x86_64 7508 6
aes_generic 26138 1 aes_x86_64
xts 3101 3
gf128mul 6050 1 xts
dm_crypt 15799 3
dm_mod 72105 7 dm_crypt
i915 495521 3
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218852 4 i915,drm_kms_helper
i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
vfat 10119 0
fat 48338 1 vfat
xfs 748207 2
ext4 440434 1
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
uhci_hcd 23436 0
ehci_hcd 41816 0
sr_mod 14823 0
usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
usb_common 954 1 usbcore
cdrom 35520 1 sr_mod
sd_mod 29559 5
ahci 21360 4
libahci 20023 1 ahci
libata 167683 2 ahci,libahci
scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
pacman -Q | grep ...
alsa-lib 1.0.26-1
alsa-plugins 1.0.26-1
alsa-utils 1.0.26-1
alsaplayer 0.99.81-5
lib32-alsa-lib 1.0.26-1
lib32-alsa-plugins 1.0.26-1
lib32-libpulse 2.1-1
lib32-libsndfile 1.0.25-2
libcanberra-pulse 0.30-2
libcdaudio 0.99.12-6
libpulse 2.1-1
libsndfile 1.0.25-2
portaudio 19_20111121-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
sound-juicer 3.5.0-1
sound-theme-freedesktop 0.8-1
soundtouch 1.6.0-1
teamspeak-soundpack-portal 1-4
webrtc-audio-processing 0.1-1
pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #5
Name: module-jackdbus-detect
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.descriptI set the loglevel to debug and rebooted.
grep -i pulse /var/log/everything.log
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
By now I also made my system not load any moudules which have oss in their name. Didn't help either. -
Different program's sound sent to different jack ports with Pulseaudio
Hello,
I just installed Pulseaudio so I could send the output of different programs to different jacks on my computer, both the jacks on my computer are provided by the same motherboard sound card, one on the front for my headphone and one on the back. So far I haven't been able to see them in pavucontrol I only see a single output.
Here's the output of "pacmd list"
Welcome to PulseAudio! Use "help" for usage information.
>>> Memory blocks currently allocated: 530, size: 1.2 MiB.
Memory blocks allocated during the whole lifetime: 4140720, size: 2.1 GiB.
Memory blocks imported from other processes: 125, size: 550.6 KiB.
Memory blocks exported to other processes: 1, size: 512 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
Memory blocks of type POOL: 404 allocated/2532098 accumulated.
Memory blocks of type POOL_EXTERNAL: 1 allocated/651424 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/1302521 accumulated.
Memory blocks of type IMPORTED: 125 allocated/306101 accumulated.
27 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
index: 4
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1">
used: 6
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "2.1"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
index: 6
name: <module-jackdbus-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is started"
module.version = "2.1"
index: 7
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "2.1"
index: 8
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "2.1"
index: 9
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "2.1"
index: 10
name: <module-gconf>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "GConf Adapter"
module.version = "2.1"
index: 11
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "2.1"
index: 12
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "2.1"
index: 13
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "2.1"
index: 14
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "2.1"
index: 15
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "2.1"
index: 16
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "2.1"
index: 17
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "2.1"
index: 18
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "2.1"
index: 19
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "2.1"
index: 20
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "2.1"
index: 21
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "2.1"
index: 22
name: <module-dbus-protocol>
argument: <>
used: -1
load once: yes
properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "2.1"
index: 23
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: no
properties:
index: 24
name: <module-x11-publish>
argument: <display=:0.0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "2.1"
index: 25
name: <module-x11-xsmp>
argument: <display=:0.0 session_manager=local/archpc:@/tmp/.ICE-unix/15374,unix/archpc:/tmp/.ICE-unix/15374>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "2.1"
index: 26
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "2.1"
1 sink(s) available.
index: 7
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: yes
current latency: 19.31 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 8
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 3
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888 Analog"
alsa.id = "ALC888 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888"
alsa.components = "HDA:10ec0888,1458a002,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available: yes)
properties:
active port: <analog-output-headphones>
2 source(s) available.
index: 8
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 344 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 2
linked by: 2
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 7
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 10
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 10% 1: 10%
0: -60.00 dB 1: -60.00 dB
balance 0.00
base volume: 10%
-60.00 dB
volume steps: 65537
muted: no
current latency: 0.09 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20.00 ms; range is 1.00 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC888 Analog"
alsa.id = "ALC888 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC888"
alsa.components = "HDA:10ec0888,1458a002,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-microphone-front: Front Microphone (priority 8500, available: no)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
active port: <analog-input-microphone-front>
9 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 17
properties:
application.name = "Login Session 2"
systemd-login.session = "2"
index: 3
driver: <module-x11-xsmp.c>
owner module: 25
properties:
application.name = "XSMP Session on xfce4-session as 276d8dfaf-2e31-425c-a448-6e95e23c73a0"
xsmp.vendor = "xfce4-session"
xsmp.client.id = "276d8dfaf-2e31-425c-a448-6e95e23c73a0"
index: 13
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "wrapper"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15869"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "wrapper"
window.x11.display = ":0.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 14
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "wrapper"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15869"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "wrapper"
window.x11.display = ":0.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 15
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "wrapper"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15869"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "wrapper"
window.x11.display = ":0.0"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 32
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
index: 40
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
window.x11.display = ":0.0"
window.x11.screen = "0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
application.icon_name = "multimedia-volume-control"
index: 57
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Clementine"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15910"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "clementine"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
application.icon_name = "application-x-clementine"
index: 58
driver: <cli.c>
owner module: 26
properties:
application.name = "UNIX socket client"
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (priority 6055)
output:analog-surround-40: Analog Surround 4.0 Output (priority 700)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760)
output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0 Output + Digital Stereo (IEC958) Input (priority 755)
output:analog-surround-41: Analog Surround 4.1 Output (priority 800)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 860)
output:analog-surround-41+input:iec958-stereo: Analog Surround 4.1 Output + Digital Stereo (IEC958) Input (priority 855)
output:analog-surround-50: Analog Surround 5.0 Output (priority 700)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 760)
output:analog-surround-50+input:iec958-stereo: Analog Surround 5.0 Output + Digital Stereo (IEC958) Input (priority 755)
output:analog-surround-51: Analog Surround 5.1 Output (priority 800)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 860)
output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1 Output + Digital Stereo (IEC958) Input (priority 855)
output:analog-surround-71: Analog Surround 7.1 Output (priority 700)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 760)
output:analog-surround-71+input:iec958-stereo: Analog Surround 7.1 Output + Digital Stereo (IEC958) Input (priority 755)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560)
output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5555)
input:analog-stereo: Analog Stereo Input (priority 60)
input:iec958-stereo: Digital Stereo (IEC958) Input (priority 55)
off: Off (priority 0)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#7: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#8: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#10: Built-in Audio Analog Stereo
ports:
analog-output: Analog Output (priority 9900, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, available: yes)
properties:
analog-input-microphone-front: Front Microphone (priority 8500, available: no)
properties:
analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
properties:
analog-input-linein: Line In (priority 8100, available: no)
properties:
iec958-stereo-input: iec958-stereo-input (priority 0, available: unknown)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, available: unknown)
properties:
1 sink input(s) available.
index: 90
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
sink: 7 <alsa_output.pci-0000_00_1b.0.analog-stereo>
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
muted: no
current latency: 89.86 ms
requested latency: 90.00 ms
sample spec: float32le 2ch 44100Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 9
client: 57 <Clementine>
properties:
media.name = "'Summertime' by 'Sex Bob-omb'"
application.name = "Clementine"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "15910"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "clementine"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
application.icon_name = "application-x-clementine"
module-stream-restore.id = "sink-input-by-application-name:Clementine"
media.title = "Summertime"
media.artist = "Sex Bob-omb"
3 source outputs(s) available.
index: 48
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 8 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: 0: 100%
0: 0.00 dB
balance 0.00
muted: no
current latency: 9.68 ms
requested latency: 20.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 9
client: 32 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 51
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 10 <alsa_input.pci-0000_00_1b.0.analog-stereo>
volume: 0: 10%
0: -60.00 dB
balance 0.00
muted: no
current latency: 0.00 ms
requested latency: 20.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 9
client: 32 <PulseAudio Volume Control>
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 58
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 8 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: 0: 100%
0: 0.00 dB
balance 0.00
muted: no
current latency: 9.71 ms
requested latency: 20.00 ms
sample spec: float32le 1ch 25Hz
channel map: mono
Mono
resample method: peaks
owner module: 9
client: 32 <PulseAudio Volume Control>
direct on input: 90
properties:
media.name = "Peak detect"
application.name = "PulseAudio Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "1.0"
application.process.id = "20106"
application.process.user = "jordan"
application.process.host = "archpc"
application.process.binary = "pavucontrol"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "3cb559c10be41c9a438615f400000947"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
0 cache entrie(s) available.
Thanks!Did you ever figure this out? I am in the same situation and cannot figure out how to refer to specific ports on the same motherboard.
https://wiki.archlinux.org/index.php/Pu … ont.2Frear looks promising. However I forget whether one of my cords is plugged in to the rear jack or the center jack, and moving my desktop to look is a little involved. Oh well, next time the need arises I will experiment further.
Last edited by rosshadden (2014-03-06 03:22:47) -
No sound with Pulseaudio, while it's working with ALSA only
Hi!
I have no sound when pulseaudio is running, while sound works great using ALSA only, i.e. when I kill pulseaudio.
In pavucontrol, the volume meter is working in the "Playback" tab, but not in the "Output devices" tab. Is this normal?
I've tried changing the default sink in pulseaudio's config, did not work.
I've tried different kernels as well as different pulseaudio versions, but it looks like the issue comes from the configuration. Note that the Arch install is fairly old (~3 years), and since this is not my own machine, I am not fully aware about all what happened in /etc. I'm using the default /etc/asound.conf and /etc/pulse/*.
From what I can remember, Pulseaudio was working well at the beginning (i.e. 3 years ago), and I can tell for sure that it stopped working at least a year ago. I cannot tell what happened in between since I have not been using the machine.
I have one onboard card + one HDMI card.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
Other details:
# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: peter 3090 F.... pulseaudio
/dev/snd/controlC1: peter 3090 F.... pulseaudio
/dev/snd/pcmC0D0c: peter 3090 F...m pulseaudio
/dev/snd/pcmC0D0p: peter 3090 F...m pulseaudio
/dev/snd/pcmC1D3p: peter 3090 F...m pulseaudio
And pulseaudio's log:
$ pulseaudio -vvvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is cb48809d0ce9a381d9d11fe60000021f.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/peter/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 MMXEXT 3DNOW 3DNOWEXT
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 20d90357267ddae6a34aca265354c587 as :1.56
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI HDMI/HDA ATI HDMI.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI HDMI
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI HDMI use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI HDMI
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-4-channel-input - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-4-channel-input - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-4-channel-input - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-4-channel-input - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-4-channel-input - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-4-channel-input - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-4-channel-input - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-4-channel-input - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0xbfa1e0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-4-channel-input - will not be able to open input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Profile set 0xbaf0a0, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
D: [pulseaudio] module-alsa-card.c: Found 1 jacks.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio1'
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Added 1 ports
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_01_00.1.hdmi-stereo.
D: [pulseaudio] module-switch-on-port-available.c: Switching initial port for sink 'alsa_output.pci-0000_01_00.1.hdmi-stereo' to 'hdmi-output-0'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 45"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aa58"
I: [pulseaudio] sink.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100200"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HDA ATI HDMI"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 45"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "1002"
I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c: device.product.id = "aa58"
I: [pulseaudio] source.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=87310
D: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hooks PCM
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88192
D: [pulseaudio] alsa-util.c: period_size : 44096
D: [pulseaudio] alsa-util.c: period_time : 999909
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87310
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88192
D: [pulseaudio] alsa-util.c: period_size : 44096
D: [pulseaudio] alsa-util.c: period_time : 999909
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87310
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
D: [pulseaudio] alsa-util.c: appl_ptr : 0
D: [pulseaudio] alsa-util.c: hw_ptr : 0
D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0xbefc80, direction=2
D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear MicrLogging from a TTY or from a DM did not change anything: still no sound.
I've tried to reset all sound-related files in /etc as much as I could. Still no success.
Since I've been experiencing this issue for months and I'm totally getting out of clue, I decided to go the lame way and to install another Arch on a separate partition. This one was working out-of-the-box with Pulseaudio.
Then I've tried to make both systems similar: same configuration, same kernel, same packages, same users, etc.
The new one was still working, the other one not.
Some logs of the new system:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Note that the Subdecives are different.
$ pulseaudio -vvvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is e58b9d41dfc1494e919c538133947f1d.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/peter/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 MMXEXT 3DNOW 3DNOWEXT
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c494a4ec75f557f0ee2222b75355750d as :1.22
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI HDMI/HDA ATI HDMI.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI HDMI
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI HDMI use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI HDMI
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-4-channel-input - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-4-channel-input - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-4-channel-input - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-4-channel-input - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-4-channel-input - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-4-channel-input - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-4-channel-input - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-4-channel-input - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x1a06130, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-4-channel-input - will not be able to open input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Profile set 0x19bb000, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
D: [pulseaudio] module-alsa-card.c: Found 1 jacks.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio1'
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Added 1 ports
I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_01_00.1.hdmi-stereo.
D: [pulseaudio] module-switch-on-port-available.c: Switching initial port for sink 'alsa_output.pci-0000_01_00.1.hdmi-stereo' to 'hdmi-output-0'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 46"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aa58"
I: [pulseaudio] sink.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100200"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HDA ATI HDMI"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 46"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "1002"
I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c: device.product.id = "aa58"
I: [pulseaudio] source.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=87310
D: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hooks PCM
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88192
D: [pulseaudio] alsa-util.c: period_size : 44096
D: [pulseaudio] alsa-util.c: period_time : 999909
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87310
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88192
D: [pulseaudio] alsa-util.c: period_size : 44096
D: [pulseaudio] alsa-util.c: period_time : 999909
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87310
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
D: [pulseaudio] alsa-util.c: appl_ptr : 0
D: [pulseaudio] alsa-util.c: hw_ptr : 0
D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x19f6940, direction=2
D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mas -
[Solved] Bluetooth A2DP source to pulseaudio OR ALSA
Edit
So, I'm happy to say that I have it working to some degree!
I wasn't happy with the default bluez tools, but I managed to find a useful set of tools which seemed to work better: http://gitorious.org/bluez-tools/bluez-tools/
I compiled and make'd them, then created the following startup script to set up everything in the order it is needed for the next part to work: https://gist.github.com/c990e397388bd4399a15
I made a file called bluetoothPin in the home directory with the following in it:
<My phone's MAC (without the angle brackets)> <A Pin Number>
The bt-agent command in the startup.sh script uses that file to authorise connections. I aim to modify it to allow any connection to connect with the same pin, I'll get into that later.
For the actual streaming, I installed qt so I could get the qdbus binary, then I followed the instructions here: http://ubuntuforums.org/showthread.php? … st10492742
That code worked, so I modified it a little so that it would wait for a connection, then make the connection, then wait for a new connection on disconnect: https://gist.github.com/8e32a9cf786995c00f2f
It's not perfect; things get a bit iffy when you try to pair and then connect a device without rebooting the pi: It disconnects gracefully, and it pairs correctly, but pulse doesn't seem to re-add it to its list, so it's no longer identified by my script. Also I haven't figured out how to pair any device against the same pin code yet. Any help with that would be awesome!
Hi there,
I'm trying to build a bluetooth audio receiver server for my car! I have a raspberry pi with arch installed on it, bluez set up and configured (I can pair my phone with it through the bluez-simple-agent, although I think I'll have to write my own pairing daemon to auto-pair anything that attempts to connect).
Baby steps though: I've got bluez all set up as I mentioned earlier, but pulse doesn't seem to "see" the bluetooth connection. I'm not sure exactly what information you guys need to help me, but I've tried to add everything I could think of:
[root@alarmpi ~]# tail /var/log/messages.log
Oct 20 18:25:22 alarmpi bluetoothd[112]: bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSource
Oct 20 18:25:22 alarmpi bluetoothd[112]: bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSink
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/HFPAG
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/HFPHS
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSource
Oct 20 18:25:22 alarmpi bluetoothd[112]: Endpoint registered: sender=:1.4 path=/MediaEndpoint/A2DPSink
Oct 20 18:25:22 alarmpi pulseaudio[165]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Oct 20 18:25:22 alarmpi pulseaudio[165]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Oct 20 18:39:57 alarmpi systemd[1]: Starting Cleanup of Temporary Directories...
Oct 20 18:39:57 alarmpi systemd[1]: Started Cleanup of Temporary Directories.
[root@alarmpi ~]#
This is interesting... to me it looks like bluetoothd is registering with pulse here.
[root@alarmpi ~]# pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-alsa-card
Argument: device_id="0" name="platform-bcm2835_AUD0.0" card_name="alsa_card.platform-bcm2835_AUD0.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "2.1"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #6
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "Joao Paulo Rechi Vita"
module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
module.version = "2.1"
Module #7
Name: module-esound-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "2.1"
Module #8
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "2.1"
Module #9
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "2.1"
Module #10
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
module.version = "2.1"
Module #11
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "2.1"
Module #12
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based of intended roles of devices"
module.version = "2.1"
Module #13
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "2.1"
Module #14
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "2.1"
Module #15
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "2.1"
Module #16
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "2.1"
Module #17
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "2.1"
Module #18
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "2.1"
Module #19
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "2.1"
Module #20
Name: module-dbus-protocol
Argument:
Usage counter: n/a
Properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "2.1"
Module #21
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Sink #0
State: SUSPENDED
Name: alsa_output.platform-bcm2835_AUD0.0.analog-stereo
Description: bcm2835 ALSA Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: 0: 86% 1: 86%
0: -4.00 dB 1: -4.00 dB
balance 0.00
Base Volume: 86%
-4.00 dB
Monitor Source: alsa_output.platform-bcm2835_AUD0.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "bcm2835 ALSA"
alsa.id = "bcm2835 ALSA"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "bcm2835 ALSA"
alsa.long_card_name = "bcm2835 ALSA"
alsa.driver_name = "snd_bcm2835"
device.bus_path = "platform-bcm2835_AUD0.0"
sysfs.path = "/devices/platform/bcm2835_AUD0.0/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "17632"
device.buffering.fragment_size = "4416"
device.access_mode = "serial"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "bcm2835 ALSA Analog Stereo"
alsa.mixer_name = "Broadcom Mixer"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Ports:
analog-output: Analog Output (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.platform-bcm2835_AUD0.0.analog-stereo.monitor
Description: Monitor of bcm2835 ALSA Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
Base Volume: 100%
0.00 dB
Monitor of Sink: alsa_output.platform-bcm2835_AUD0.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of bcm2835 ALSA Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "bcm2835 ALSA"
alsa.long_card_name = "bcm2835 ALSA"
alsa.driver_name = "snd_bcm2835"
device.bus_path = "platform-bcm2835_AUD0.0"
sysfs.path = "/devices/platform/bcm2835_AUD0.0/sound/card0"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 15
Properties:
application.name = "Login Session c1"
systemd-login.session = "c1"
Client #2
Driver: protocol-native.c
Owner Module: 8
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "26"
application.process.id = "253"
application.process.user = "root"
application.process.host = "alarmpi"
application.process.binary = "pactl"
application.language = "C"
application.process.machine_id = "5c49cb5bf08724338eb09a6900092bb0"
Card #0
Name: alsa_card.platform-bcm2835_AUD0.0
Driver: module-alsa-card.c
Owner Module: 4
Properties:
alsa.card = "0"
alsa.card_name = "bcm2835 ALSA"
alsa.long_card_name = "bcm2835 ALSA"
alsa.driver_name = "snd_bcm2835"
device.bus_path = "platform-bcm2835_AUD0.0"
sysfs.path = "/devices/platform/bcm2835_AUD0.0/sound/card0"
device.string = "0"
device.description = "bcm2835 ALSA"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Profiles:
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority. 100)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority. 6000)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: output:analog-stereo
Ports:
analog-output: Analog Output (priority: 9900)
Part of profile(s): output:analog-mono, output:analog-stereo
[root@alarmpi ~]# cat /etc/bluetooth/audio.conf
# Configuration file for the audio service
# This section contains options which are not specific to any
# particular interface
[General]
Enable=Source
# Switch to master role for incoming connections (defaults to true)
#Master=true
# If we want to disable support for specific services
# Defaults to supporting all implemented services
#Disable=Gateway,Source,Socket
# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
# Defaults to HCI
#SCORouting=PCM
# Automatically connect both A2DP and HFP/HSP profiles for incoming
# connections. Some headsets that support both profiles will only connect the
# other one automatically so the default setting of true is usually a good
# idea.
#AutoConnect=true
# Headset interface specific options (i.e. options which affect how the audio
# service interacts with remote headset devices)
[Headset]
# Set to true to support HFP, false means only HSP is supported
# Defaults to true
HFP=true
# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
MaxConnected=1
# Set to true to enable use of fast connectable mode (faster page scanning)
# for HFP when incoming call starts. Default settings are restored after
# call is answered or rejected. Page scan interval is much shorter and page
# scan type changed to interlaced. Such allows faster connection initiated
# by a headset.
FastConnectable=false
# Just an example of potential config options for the other interfaces
#[A2DP]
SBCSources=1
MPEG12Sources=0
[root@alarmpi ~]# cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
About my project in general:
I want to be able to do the following:
- Give pulseaudio access to the bluetooth device, and use the A2DP protocol to receive the audio. From my research, it is possible, but I'm not sure how.
- Open up bluez so that I can pair any device by connecting with "1234" for the auth, then it will automatically check for A2DP and give that information to pulse
The idea being that any bluetooth device can pair without any interaction from the raspberry pi, and then pulse will have access to all of the devices which are playing music.
1] Is this even possible?
2] Can I use alsa instead as it seems it'd be easier/lighter to manage?
3] Are there any documents other than arch's bluetooth and pulse wikis that I can read to help me figure this out?
Last edited by s0l1dsnak3123 (2012-10-20 23:53:01)Actually I've solved it myself by looking at the wiki page I posted.
I am not sure about what you said but PulseAudio doesn't require ALSA (alsa-lib, alsa-utils, sort of) to play sound except when with those applications that do not have direct support (now even Flash have that). But maybe the drivers for sound cards in Linux kernel could be said as a part of ALSA, then I am not sure about those stuff.
Last edited by tom.yan (2011-08-11 06:47:35) -
Blue Yeti USB microphone not working in ALSA/PulseAudio
Hi all,
I recently bought a Blue Yeti USB microphone. It is supposed to require no drivers for Windows and OS X, and so far, it works well under Windows, but I cannot seem to get it to function on Arch Linux. As fair warning, although I am relatively experienced with Linux, I don't know much about the internals of ALSA/PA --- up until now, it has just "always worked", so this is my first real foray into the area. I've tried for many days, with no success, to get this thing working.
So, let's start off first with my configuration.
I have a few audio devices:
An on-board audio solution that I don't typically use. For testing, I have connected an old, crappy pair of headphones, but normally I keep this disabled. It has one capture device. (Analog stereo [or 5.1/7.1/etc] duplex)
An external DAC that is connected via USB and is output-only. So, no capture devices on that. (Digital/IEC958 output)
The Blue Yeti itself, which is connected via USB and supports output (it has an internal DAC) as well as input. So, one capture device here. (Digital stereo output and analog stereo input???)
The HDMI-out stuff for nvidia, which I never use
Here is the output of "arecord -l":
**** List of CAPTURE Hardware Devices ****
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is the the output of "arecord -L":
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Microphone
Yeti Stereo Microphone, USB Audio
Default Audio Device
front:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
Front speakers
surround40:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Microphone,DEV=0
Yeti Stereo Microphone, USB Audio
IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
Here is the output of "aplay -l" (for completeness):
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [USB2.0 High-Speed True HD Audio], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Microphone [Yeti Stereo Microphone], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
If the output of "aplay -L" is needed, let me know, but it's not all that different from arecord -L.
Here is my /etc/asound.conf:
defaults.pcm.rate_converter "samplerate_best"
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
I don't remember where the bulk of that came from; maybe it was installed like that or maybe I put it in there. Here is another useful command showing non-commented-out/non-blank lines in the pulseaudio conf:
$ egrep -v '^;|^#|^$' /etc/pulse/*.conf
/etc/pulse/client.conf:autospawn=no
/etc/pulse/daemon.conf:exit-idle-time=0
/etc/pulse/daemon.conf:default-sample-rate = 192000
So, there's not much I've done there. Here's the contents of /proc/asound/cards:
0 [Audio ]: USB-Audio - USB2.0 High-Speed True HD Audio
CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed
1 [Microphone ]: USB-Audio - Yeti Stereo Microphone
Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed
2 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7530000 irq 52
3 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7080000 irq 17
And here's the contents of /proc/asound/modules:
0 snd_usb_audio
1 snd_usb_audio
2 snd_hda_intel
3 snd_hda_intel
Now, here is the output of "pactl list sources" (the Blue Yeti is last in the list):
Source #3
State: RUNNING
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 17972 / 27% / -33.71 dB, front-right: 17972 / 27% / -33.71 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 610 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:2"
device.buffering.buffer_size = "76800"
device.buffering.fragment_size = "19200"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438436,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not available)
analog-input-rear-mic: Rear Microphone (priority: 8200, available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-rear-mic
Formats:
pcm
Source #11
State: RUNNING
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7530000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #15
State: RUNNING
Name: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo.monitor
Description: Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 192000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of USB2.0 High-Speed True HD Audio Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "USB2.0 High-Speed True HD Audio"
alsa.long_card_name = "CMEDIA USB2.0 High-Speed True HD Audio at usb-0000:00:1d.0-1.7, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.7:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.0/sound/card0"
udev.id = "usb-CMEDIA_USB2.0_High-Speed_True_HD_Audio-00-Audio"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0319"
device.product.name = "USB2.0 High-Speed True HD Audio"
device.serial = "CMEDIA_USB2.0_High-Speed_True_HD_Audio"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Formats:
pcm
Source #19
State: RUNNING
Name: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo.monitor
Description: Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.iec958-stereo
Latency: 0 usec, configured 100000 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Integrated Rate Matching Hub Digital Stereo (IEC958)"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Formats:
pcm
Source #23
State: RUNNING
Name: alsa_input.usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone.analog-stereo
Description: Integrated Rate Matching Hub Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 9
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 17775 / 27% / -34.00 dB
Monitor of Sink: n/a
Latency: 949811526 usec, configured 100000 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Yeti Stereo Microphone"
alsa.long_card_name = "Blue Microphones Yeti Stereo Microphone at usb-0000:00:1d.0-1.8, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.8:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/sound/card1"
udev.id = "usb-Blue_Microphones_Yeti_Stereo_Microphone_REV8-00-Microphone"
device.bus = "usb"
device.vendor.id = "b58e"
device.vendor.name = "Intel Corp."
device.product.id = "9e84"
device.product.name = "Integrated Rate Matching Hub"
device.serial = "Blue_Microphones_Yeti_Stereo_Microphone_REV8"
device.form_factor = "microphone"
device.string = "front:1"
device.buffering.buffer_size = "19200"
device.buffering.fragment_size = "4800"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Integrated Rate Matching Hub Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USBb58e:9e84"
module-udev-detect.discovered = "1"
device.icon_name = "audio-input-microphone-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Honestly, I think that's about all of the configuration info I can give. Here are some screenshots of pavucontrol, though, in case you are not yet sated: http://imgur.com/a/ngyLl
Now, on to the debugging stuff. First: everything except Blue Yeti recording works. The external DAC works, the on-board audio (both input and output) work, using the DAC in the Blue Yeti to play music/monitor the microphone works (so it works as an output). The only thing that doesn't work is actual recording from the Blue Yeti itself.
When I try to record from the Blue Yeti with parecord -v, I get very strange behavior. Essentially, the "latency" of the microphone measured is exactly the same as the time it has been recording. That is, if it has been recording for 5 sec, then the latency is 5000000 usec. Also, if I try to record something in Audacity, I get no result except for a message box that says "Latency Correction has caused the recorded audio to be hidden before zero. Audacity has brought it back to start at zero." Also, pavucontrol doesn't show an input volume bar for the Blue Yeti, as in the above screenshots, whereas it normally will for microphones that are getting input. The Yeti is not muted, either, so it should be picking up ambient fan noise and such.
Does anyone have any ideas? Is there some configuration error I've made? Typically, this sort of stuff simply works out of the box for me, so I am somewhat stuck on what to do. Could it be a driver-level bug?I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
Last edited by rwiggins (2014-12-14 00:26:39) -
A Variety of Glitches in my Iphone Any clues on Any of them?
• A Sudden drop in brightness level that only restarting seems to fix. It will just drop to 15% of Normal Brightness for no reason. (about Once a day, about 15 times total)
• The Camera Shutter works Very Slowly sometimes for no reason at all. I push to click, then the shutter goes into a Slowmotion movement and seems to freeze with the fins in the "Snap Image, Closed fins over Screen Position". It can freeze for a second or two. Stops you from taking another "Fast Shot". (About every 5th Picture or 7 times a day)
• The Iphone seems to get quite HOT when Playing "Defend Your Castle". I'm playing at the high levels. Could an App make the Phone heat up?
• The Iphone periodically vibrates for no special reason. Mostly like short pulses. Not a big glitch, just odd ( 5 times a day)
•The Iphone mute button is too easily pushed BY YOUR EARLOBE) when you have the phone against your ear listening to a conversation.
• About three times since I've had this replacement (About 2.5 weeks). The phone has simply gone dead and shut off during a call. It turns right back on and works.
•The Orientation of the phone is off. If i start the Ibeer App or the Level app, the iphone thinks that "straight up" is around the 1 or 2 o'clock position. Is there a way to calibrate the whole phone? Not just the Level App?
•About once a day the keyboard freezes with a Letter in the Up Postion. When you Push the keys and that "Flag" letter Pops up ( Especially the letter "C"). I need to restart Safari to get the keyboard to work again ( Sometimes I need to re-boot the phone for the keyboard to work again).If you have tried the basics from the manual:
Restart
Reset
Restore
Then it may be time for another visit to the genius bar.
For one thing, the mute button should not be available when the iphone is against your ear. The proximity sensors shut the screen off when it is close to your head.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf -
After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks
There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.
-
Auto Mute is not working when cycle recording in MIDI to a take folder
I'm hoping someone can provide insight into the problem I'm having in Logic X. I'm attempting to record multiple takes of MIDI recording playing an e-kit through Addictive Drums. I have gone into the MIDI recording options menu and selected "create take folders". According to the manual, the previous take is supposed to be auto-muted when the cycle region resets so I can record the next take. However, instead Logic is playing the previous region. This did not happen when I cycle recorded in Garage Band and I'm hoping I am just doing something simple wrong. I know there is an option to create a new track and mute the previous, but I don't want to create 7 or 8 new tracks when I should be able to put them in a take folder. The auto-mute feature worked in the tutorial video on Lynda.com, so I'm wondering what I am doing wrong. Any advice?
Upon further review, this problem seems to only appear when I work on projects that I import into Logic from GarageBand '11. This is a HUGE glitch for my workflow, as I use cycle recording extensively while writing drum parts for songs and my biggest collaborating artist uses GB '11. Does anyone know if there is something I'm missing?
Maybe you are looking for
-
I have an 1st gen Ipod touch that runs 3.1.3 IOS.
1st Gen Ipod touch 3.1.3 ios. No apps will work on this ios is there anything I can do to fix this? Thanks
-
Itunes Store error message: "your payment method was declined.."
Hello! I'm from Ukraine, today, tried to buy the app (It worked before) but itunes error message: "your payment method was declined ..". The card is fine, tried different. What's the problem? how to fix?
-
How to install a copy of WinXP using VMWare 4 Fusion on my server
Hi all, I would like to install one virtual Windows XP machine one my server that has VMWare Fusion 4 on it that will be accessible to all my user accounts. I don't one every one to have to have there on virtual XP machine as this eats up valuable di
-
Photoshop Automation Plug-in - Getting non western characters from layer names and layer text
Hi To all members of the forum. My name is Momir Zecevic and i have developed automation plugin for Photoshop and it work well for almost 8 years now (Windows XP, Vista, 8, Visual studio 97 and Photoshop 7 SDK). However client for which I have writt
-
Hi, I have a WRT300N that acts as a router/DHCP in a small home network. I have a p2p program, DC++, which requires port forwarding to work correctly. I have setup this in the router, port 1412 and the computer ip address to forward to. The problem i