PulseAudio stops sounding when I switch to other display (Ctrl+Alt+F1)

Hello.
When I am playing any sound and I switch to a display (Ctrl+Alt+F1, Ctrl+Alt+F2...) where I have not loged in or a am not loged with my default user account, the sound stops, and when I switch back, I continues sounding.
Anyone have an idea of what could be causing this?
Thanks.

Thanks for the reply.
Is there a way to change that behavior?
Edit: After killing console-kit-daemon, sound works on all displays, but I think that it is not the best solution.
Last edited by eduardosm (2011-12-02 21:29:57)

Similar Messages

Why do I get the 'critical stop' sound when I leave the firefox browser - doesn't happen with explorer?

Why do I get the 'critical stop' sound when I leave the firefox browser. This doesn't happen when using internet explorer?

Do you mean that there is a problem with closing Firefox?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox if you are currently doing that by clicking the close X on the Firefox title bar.

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

Abelynn-
Does the problem occur in both Camera and Photo Booth Apps? If you run the FaceTime App, does the front camera work?
If the front camera never works, you may have a defective iPad. If you are near an Apple company store, the Apple Store Genius can verify the problem, and may replace it on the spot.
If the front camera works for at least one App, try rebooting the iPad. Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. After a couple of minutes, the iPad will restart. Rebooting will not hurt anything, and may correct your problem.
Fred

I am using Office for MAC 2008, when I switch to other applications on my MAC and then go back to Office window it never brings me back to the window I was working on. I have to click on the Window tab, but my window is ticked but not appearing. Why?

I am using Office for MAC 2008, when I switch to other applications on my MAC, to copy and paste something for instance and then go back to Office window it never brings me back to the window/worksheet I was working on. I have to click on the Window tab in excell for instance, but my window is ticked but not appearing. I then have to click on one of the other open files and then click back to the sheet I was working on for it to appear. Can any one tell me why?

Does that happen only on web pages that are running a Flash presentation? <br />
When Flash "steals focus" from Firefox, you need to click outside the Flash presentation in the browser window, to regain focus in Firefox. A major problem arises when the Flash presentation is in the entire browser window, though. The Firefox developers are working on fixing that in Firefox, but it doesn't look like a fix is going to make it into Firefox 4.0, though.

Can't switch to console with ctrl+alt+f? anymore

i installed the lastest xorg packages and i am using fluxbox-cvs and i can't switch to console with ctrl+alt+f? anymore - any ideas?

no, but i did have to make that switch from keyboard to kbd to satisfy the new xorg config...i'll try all that but i am away from my box at the mo
thanks for the on topic post
(as much as i would like to flame oscar about his/her choice of wm...i can't be f*cked. aside from the slit hang problem i have not seen a bug in cvs that has remained for any significant time at all. besides, it's pre 1.0, it's allowed to be buggy)
.:after thought:.
fluxbox = overgrown bug
kde and gnome = overgrown
.:after after thought:.
i see you are a gnome user, how ironic you are,
ah...flame war!

Bluetooth stops working when data switches

I've had my GS4 for almost a month now, and I've been having trouble while playing music via Bluetooth on my car stereo. I noticed that as I was driving, my stereo display would stop showing the title of the song, then exactly 2 seconds later the music would stop. When I looked at my phone, it showed that the music was still playing, but no sound was coming from anywhere. If I hit pause and then play again, the music started playing through the car speakers again. This was happening at completely random intervals, sometimes as often as 5 times during a 3-minute song. I started looking on the internet for a reason why this would happen and how to fix it, and I found that some people had problems with their WiFi detecting networks as they drove, and every time a new network was detected, their music would stop. I tried turning my WiFi off, but the music kept stopping. With that knowledge, I determined that the music was stopping whenever the status of my data connection changed. If I moved from a 4G to 3G area, my music stopped. If I went back into a 4G area, my music stopped. If I move to an area where I don't get a data connection, or back into a data coverage area, my music stops. The only way I can find to stop this from happening is to turn off my data completely. Has anybody else had this problem? Does anyone know how to fix it? Thank you so much for taking the time to read.

Dear jesiswinning,
Good afternoon. I am sorry to learn of the difficulites you are experiencing with listening to music on your Samsung Galaxy S4 via Bluetooth. It would be my pleasure to address your equipment concerns.
I have verified this is not a known issues with the device. Have you tried removing the battery, then syncing back to your car? If this does not work, try to remove the SIM card from the phone, then re-insert back to your phone. For instructions on how to do this, click http://vz.to/10NQRZJ If you are still experiencing difficulites, please feel free to reach out to us. We will be more than happy to further assist.
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Some keys and functions stop working when i switch users.

2 people use my computer and just recently when i switch to my user, the special function keys stop working (screen and keyboard brightness - not sure what other keys aren't working. spaces works and so does play/pause etc). also i can't log out using the key short cuts nor by going to the menu and selecting Log Out.
switching back to the other user, the keys still work. and if i set the brightness there when i switch back the setting remain on my side. but i can't control them. the only way to get them back is to restart the computer which i can't do from my user. when i select restart, it beach balls for a few seconds then nothing happens.

Search for PRAM Reset On Mac. Unless restrictions of some kind are set on that other user, this shouldn't be happening.

Mozc stops working when I switch locales

Hello,
I have mozc and ibus installed on my system.
When I have LANG="en_US.UTF-8" in my /etc/locale.conf, mozc works fine.
However, when I set LANG="ja_JP.UTF-8", mozc stops working. Ibus starts fine, and I am able to type in Roman characters, but I am unable to type any Japanese characters, and I cannot do any conversions.
I've generated 4 locales: en_US.UTF-8, en_US.ISO-8859-1, ja_JP.EUC-JP, and ja_JP.UTF-8 using the locale-gen command.
I'm not using a login manager, and my .xinitrc contains the following:
xmodmap ~/.Xmodmap
xrdb -merge ~/.Xresources
ibus-daemon -xrd
exec gnome-session
My .xprofile contains:
export XMODIFIERS="@im=ibus"
export GTK_IM_MODULE="ibus"
export QT_IM_MODULE="ibus"
I'm not really sure what the issue is. The problem persists across multiple WMs (awesome, gnome3, and xfce4). Thanks in advance, and if more information is needed just ask.

Thank you very much for your help. As you say I mean when I switch off the screen or when it goes to sleep. I realize though that it has to do with the app I'm using, SVTplay, rather than the devices since it turns out to work with Netflix. Sorry for your trouble unless you can help out with the app.

Stop sounds when new window opens

Is there a way to get Flash to stop when a user changes focus
from the page where the flash is located?
I have a flash audio player on each page that a person can
switch on and off while they are on the page but if they click a
link that opens a new window from that location the audio from the
flash can still be heard because the page with the flash is still
up but running in the background. Closing the page in this case is
not an option. What I want to do is just make flash stop playing
when a new window is opened.
Can this be done?

Hi
You can use the stopAllsounds() function. Check Flash Help
for more details.
Hope it helps.

No sound when i switch users

when i switch users i have no sound at all, not even the volume up/down noise. the only thing that gets the sound to work is if i plug in and unplug hadphones. anyone know a way to fix this?

You probably have a stuck switch. Next time the sound disappears, look in the audio output port. If you see a red light, the switch has stuck and putting in/out an earphones jack will usually trip it.
If you can't live with this, a repair shop is in order for a permanent fix.
Ciao.

Usb mouse lag or stops intermittently when I switch on an usb fan

Hi
thats what happen even changing usb port
Thanks for your help

emeres wrote:
There is a hardware limit of 0,5 A for the high powered state for USB2.0 ports. Check the specification on usb.org.
EEWeb article wrote:USB specifications limit the device current to 100mA prior to enumeration. After enumeration, a high-powered device can request no more than 500mA.
I suspect the fan has been designed to work at safe current levels when already in motion. Is the fan listed by 'lsusb' when attached? If no, there is little you can do on the software side.
However there are at least two possibilities on the hardware side, both potentially destructive and with side effects, yet relatively simple to implement. Since there seems to be a little problem with communication, I will refrain from naming those however.
How does the hub behave when you connect the fan when already in motion? Is the timeout for the mouse shorter or not present at all?
Edit: Wrong link.
Is the fan listed by 'lsusb' when attached?: No
How does the hub behave when you connect the fan when already in motion? Is the timeout for the mouse shorter or not present at all?: When I switch off the fan, mouse works perfect.

Revolve 810 G1 Unlock Computer when in Tablet Mode. Press CTRL-ALT-DEL or Windows Security Button

1. I have an Revolve 810 G1
Running Windows 7 Pro (64 Bit).
When I change the screen to Tablet Mode
(Folding tablet over keyboard and using as tablet).
I lock my computer.
2. What to know how to unlock without having to Open back up and use the CTL-Alt-DEL keys.
When Locked screen shows: Press CTRL-ALT-DEL or use the Windows Security Button to unlock this computer.
I would like to use the Windows Button on the bottom of the screen
(One Used in Windows 8 to change between Desktop and Metro) to Unlock screen And bring up on screen keyboard to put in my password.
This is probably how it should work, but it does not work.
Even bringing up the onscreen keyboard via the blue power button On the screen to Ease Of Access does not work.
The CLT-ALT-DEL on the on screen keyboard will not unlock the screen.
P.S.
Where is that Windows Security Button when you need it?
Thanks,
Rog

If you are using Windows 7 (not Windows 8), you should be able to touch the Ease of Access button at the lower left of the screen, then select Type without the keyboard (On-screen keyboard). When the on-screen keyboard pops-up, press CTRL, then ALT, then DEL. You should get a password prompt; the on-screen keyboard will stay visible unless and until you close it.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

Ctrl+Alt+F2 doesn't seem to register. It's been a long term issue I have had for years. I've tried all the various fixes.
I can manually change to virtual terminals without issues using:
sudo chvt 2
Once I'm in a VT I can use Alt+Fx to change between them, until I go back into Xorg. So it's unlikely to be a graphics driver problem, most other people with similar issues complain of getting a blank screen.
Although without sudo I get
# chvt 2
Couldn't get a file descriptor referring to the console.
I have the following in /etc/X11/xorg.conf.d/15-forcevt.conf
Section "ServerFlags"
Option "HandleSpecialKeys" "always"
Option "DontVTSwitch" "false"
Option "DontZap" "false"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
A also enabled the terminate option in gnome-tweak-tool.
xmodmap -pke has the following:
keycode 67 = F1 F1 F1 F1 F1 F1 XF86Switch_VT_1
keycode 68 = F2 F2 F2 F2 F2 F2 XF86Switch_VT_2
Nothing is printed in Xorg logs when I try pushing the keys.
I'm using SLIM (although I tried manually via startx), AwesomeWM (also tried fluxbox with a blank conf), nvidia (proprietary), UEFI.
[ 2490.220]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 2490.225] X Protocol Version 11, Revision 0
[ 2490.227] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 2490.229] Current Operating System: Linux ender 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 2490.229] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux root=UUID=ff84efeb-e43f-47fe-a14d-07894feb0013 rw rootflags=subvol=@ quiet
[ 2490.233] Build Date: 14 March 2015 06:45:50PM
[ 2490.234]
[ 2490.236] Current version of pixman: 0.32.6
[ 2490.240] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2490.240] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2490.247] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1 10:44:03 2015
[ 2490.249] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2490.250] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2490.250] (==) ServerLayout "Layout0"
[ 2490.250] (**) |-->Screen "Screen0" (0)
[ 2490.250] (**) | |-->Monitor "Monitor0"
[ 2490.251] (**) | |-->Device "Device0"
[ 2490.251] (**) |-->Input Device "Keyboard0"
[ 2490.251] (**) |-->Input Device "Mouse0"
[ 2490.251] (**) Option "DontVTSwitch" "false"
[ 2490.251] (**) Option "DontZap" "false"
[ 2490.251] (**) Option "Xinerama" "0"
[ 2490.251] (==) Automatically adding devices
[ 2490.251] (==) Automatically enabling devices
[ 2490.251] (==) Automatically adding GPU devices
[ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2490.251] Entry deleted from font path.
[ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2490.251] Entry deleted from font path.
[ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2490.251] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2490.251] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2490.251] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2490.251] (WW) Disabling Keyboard0
[ 2490.251] (WW) Disabling Mouse0
[ 2490.251] (II) Loader magic: 0x815d80
[ 2490.251] (II) Module ABI versions:
[ 2490.251] X.Org ANSI C Emulation: 0.4
[ 2490.251] X.Org Video Driver: 19.0
[ 2490.251] X.Org XInput driver : 21.0
[ 2490.251] X.Org Server Extension : 9.0
[ 2490.254] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2490.254] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2490.254] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2490.258] (--) PCI:*(0:1:0:0) 10de:1180:10de:0969 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2490.258] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2490.258] (II) LoadModule: "glx"
[ 2490.258] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2490.268] (II) Module glx: vendor="NVIDIA Corporation"
[ 2490.268] compiled for 4.0.2, module version = 1.0.0
[ 2490.268] Module class: X.Org Server Extension
[ 2490.268] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 2490.268] (II) LoadModule: "nvidia"
[ 2490.268] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2490.269] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2490.269] compiled for 4.0.2, module version = 1.0.0
[ 2490.269] Module class: X.Org Video Driver
[ 2490.269] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 2490.269] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2490.269] (++) using VT number 1
[ 2490.269] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2490.269] (II) Loading sub module "fb"
[ 2490.269] (II) LoadModule: "fb"
[ 2490.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2490.269] (II) Module fb: vendor="X.Org Foundation"
[ 2490.269] compiled for 1.17.1, module version = 1.0.0
[ 2490.269] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2490.269] (II) Loading sub module "wfb"
[ 2490.269] (II) LoadModule: "wfb"
[ 2490.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2490.270] (II) Module wfb: vendor="X.Org Foundation"
[ 2490.270] compiled for 1.17.1, module version = 1.0.0
[ 2490.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2490.270] (II) Loading sub module "ramdac"
[ 2490.270] (II) LoadModule: "ramdac"
[ 2490.270] (II) Module "ramdac" already built-in
[ 2490.270] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2490.270] (==) NVIDIA(0): RGB weight 888
[ 2490.270] (==) NVIDIA(0): Default visual is TrueColor
[ 2490.270] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2490.270] (**) NVIDIA(0): Option "Stereo" "0"
[ 2490.270] (**) NVIDIA(0): Option "SLI" "Off"
[ 2490.270] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 2490.270] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 2490.270] (**) NVIDIA(0): Stereo disabled by request
[ 2490.270] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 2490.270] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 2490.271] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: nvidia-auto-select +1280+0, DVI-D-0: nvidia-auto-select +0+416"
[ 2490.271] (**) NVIDIA(0): Enabling 2D acceleration
[ 2490.690] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 2490.692] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680 (GK104) at PCI:1:0:0 (GPU-0)
[ 2490.692] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 2490.692] (--) NVIDIA(0): VideoBIOS: 80.04.09.00.01
[ 2490.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2490.709] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:1:0:0
[ 2490.709] (--) NVIDIA(0): CRT-0
[ 2490.709] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0) (boot, connected)
[ 2490.709] (--) NVIDIA(0): DFP-1
[ 2490.709] (--) NVIDIA(0): DFP-2
[ 2490.709] (--) NVIDIA(0): Samsung SyncMaster (DFP-3) (connected)
[ 2490.709] (--) NVIDIA(0): DFP-4
[ 2490.709] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0): Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): Samsung SMS27A850T (DFP-0): 330.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): Samsung SyncMaster (DFP-3): Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-3): 330.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 2490.710] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 2490.710] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2490.710] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[ 2490.710] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 2490.712] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2490.712] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[ 2490.712] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2490.713] (II) NVIDIA(0): Validated MetaModes:
[ 2490.713] (II) NVIDIA(0):
[ 2490.713] (II) NVIDIA(0): "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[ 2490.713] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1440
[ 2490.742] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 2490.742] (--) NVIDIA(0): option
[ 2490.742] (--) Depth 24 pixmap format is 32 bpp
[ 2490.743] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2490.743] (II) NVIDIA: access.
[ 2490.746] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2490.746] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2490.746] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2490.746] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2490.746] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2490.746] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2490.746] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2490.746] (II) NVIDIA(0): Config Options in the README.
[ 2490.761] (II) NVIDIA(0): Setting mode "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[ 2490.853] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2490.853] (==) NVIDIA(0): Backing store enabled
[ 2490.853] (==) NVIDIA(0): Silken mouse enabled
[ 2490.853] (**) NVIDIA(0): DPMS enabled
[ 2490.853] (II) Loading sub module "dri2"
[ 2490.853] (II) LoadModule: "dri2"
[ 2490.853] (II) Module "dri2" already built-in
[ 2490.853] (II) NVIDIA(0): [DRI2] Setup complete
[ 2490.853] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2490.853] (--) RandR disabled
[ 2490.856] (II) Initializing extension GLX
[ 2490.856] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 2490.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2490.914] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 2490.914] (II) LoadModule: "evdev"
[ 2490.914] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2490.914] (II) Module evdev: vendor="X.Org Foundation"
[ 2490.914] compiled for 1.17.1, module version = 2.9.2
[ 2490.914] Module class: X.Org XInput Driver
[ 2490.914] ABI class: X.Org XInput driver, version 21.0
[ 2490.915] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[ 2490.915] (II) Using input driver 'evdev' for 'Power Button'
[ 2490.915] (**) Power Button: always reports core events
[ 2490.915] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 2490.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2490.915] (--) evdev: Power Button: Found keys
[ 2490.915] (II) evdev: Power Button: Configuring as keyboard
[ 2490.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
[ 2490.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2490.915] (**) Option "xkb_rules" "evdev"
[ 2490.915] (**) Option "xkb_model" "pc104"
[ 2490.915] (**) Option "xkb_layout" "us"
[ 2490.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.940] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2490.940] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2490.940] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 2490.941] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[ 2490.941] (II) Using input driver 'evdev' for 'Power Button'
[ 2490.941] (**) Power Button: always reports core events
[ 2490.941] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2490.941] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2490.941] (--) evdev: Power Button: Found keys
[ 2490.941] (II) evdev: Power Button: Configuring as keyboard
[ 2490.941] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event6"
[ 2490.941] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2490.941] (**) Option "xkb_rules" "evdev"
[ 2490.941] (**) Option "xkb_model" "pc104"
[ 2490.941] (**) Option "xkb_layout" "us"
[ 2490.941] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[ 2490.944] (II) No input driver specified, ignoring this device.
[ 2490.944] (II) This device may have been added with another device file.
[ 2490.944] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event0)
[ 2490.944] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[ 2490.944] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.944] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 2490.944] (II) Using input driver 'evdev' for 'HID 1017:0002'
[ 2490.944] (**) HID 1017:0002: always reports core events
[ 2490.944] (**) evdev: HID 1017:0002: Device: "/dev/input/event0"
[ 2490.945] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[ 2490.945] (--) evdev: HID 1017:0002: Found keys
[ 2490.945] (II) evdev: HID 1017:0002: Configuring as keyboard
[ 2490.945] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.0/0003:1017:0002.0001/input/input2/event0"
[ 2490.945] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 8)
[ 2490.945] (**) Option "xkb_rules" "evdev"
[ 2490.945] (**) Option "xkb_model" "pc104"
[ 2490.945] (**) Option "xkb_layout" "us"
[ 2490.945] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.945] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event1)
[ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev pointer catchall"
[ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[ 2490.945] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.946] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 2490.946] (II) Using input driver 'evdev' for 'HID 1017:0002'
[ 2490.946] (**) HID 1017:0002: always reports core events
[ 2490.946] (**) evdev: HID 1017:0002: Device: "/dev/input/event1"
[ 2490.946] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[ 2490.946] (--) evdev: HID 1017:0002: Found 9 mouse buttons
[ 2490.946] (--) evdev: HID 1017:0002: Found scroll wheel(s)
[ 2490.946] (--) evdev: HID 1017:0002: Found relative axes
[ 2490.946] (--) evdev: HID 1017:0002: Found x and y relative axes
[ 2490.946] (--) evdev: HID 1017:0002: Found absolute axes
[ 2490.946] (II) evdev: HID 1017:0002: Forcing absolute x/y axes to exist.
[ 2490.946] (--) evdev: HID 1017:0002: Found keys
[ 2490.946] (II) evdev: HID 1017:0002: Configuring as mouse
[ 2490.946] (II) evdev: HID 1017:0002: Configuring as keyboard
[ 2490.946] (II) evdev: HID 1017:0002: Adding scrollwheel support
[ 2490.946] (**) evdev: HID 1017:0002: YAxisMapping: buttons 4 and 5
[ 2490.946] (**) evdev: HID 1017:0002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.1/0003:1017:0002.0002/input/input3/event1"
[ 2490.946] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 9)
[ 2490.946] (**) Option "xkb_rules" "evdev"
[ 2490.946] (**) Option "xkb_model" "pc104"
[ 2490.946] (**) Option "xkb_layout" "us"
[ 2490.946] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.946] (II) evdev: HID 1017:0002: initialized for relative axes.
[ 2490.946] (WW) evdev: HID 1017:0002: ignoring absolute axes.
[ 2490.946] (**) HID 1017:0002: (accel) keeping acceleration scheme 1
[ 2490.946] (**) HID 1017:0002: (accel) acceleration profile 0
[ 2490.946] (**) HID 1017:0002: (accel) acceleration factor: 2.000
[ 2490.946] (**) HID 1017:0002: (accel) acceleration threshold: 4
[ 2490.946] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/mouse0)
[ 2490.946] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.946] (II) No input driver specified, ignoring this device.
[ 2490.947] (II) This device may have been added with another device file.
[ 2490.947] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event2)
[ 2490.947] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 2490.947] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[ 2490.947] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[ 2490.947] (**) Logitech G9x Laser Mouse: always reports core events
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event2"
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found 20 mouse buttons
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found x and y relative axes
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C066.0003/input/input4/event2"
[ 2490.947] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: MOUSE, id 10)
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/mouse1)
[ 2490.948] (II) No input driver specified, ignoring this device.
[ 2490.948] (II) This device may have been added with another device file.
[ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event3)
[ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev keyboard catchall"
[ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "Keyboard Defaults"
[ 2490.949] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[ 2490.949] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[ 2490.949] (**) Logitech G9x Laser Mouse: always reports core events
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event3"
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found 1 mouse buttons
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing relative x/y axes to exist.
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found absolute axes
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing absolute x/y axes to exist.
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found keys
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as keyboard
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C066.0004/input/input5/event3"
[ 2490.949] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: KEYBOARD, id 11)
[ 2490.949] (**) Option "xkb_rules" "evdev"
[ 2490.949] (**) Option "xkb_model" "pc104"
[ 2490.949] (**) Option "xkb_layout" "us"
[ 2490.949] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[ 2490.949] (WW) evdev: Logitech G9x Laser Mouse: ignoring absolute axes.
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[ 2490.949] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
[ 2490.949] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2490.949] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 2490.950] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[ 2490.950] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 2490.950] (**) USB Keyboard: always reports core events
[ 2490.950] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
[ 2490.950] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[ 2490.950] (--) evdev: USB Keyboard: Found keys
[ 2490.950] (II) evdev: USB Keyboard: Configuring as keyboard
[ 2490.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:04D9:0274.0005/input/input6/event4"
[ 2490.950] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12)
[ 2490.950] (**) Option "xkb_rules" "evdev"
[ 2490.950] (**) Option "xkb_model" "pc104"
[ 2490.950] (**) Option "xkb_layout" "us"
[ 2490.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.951] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
[ 2490.951] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2490.951] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 2490.951] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[ 2490.951] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 2490.951] (**) USB Keyboard: always reports core events
[ 2490.951] (**) evdev: USB Keyboard: Device: "/dev/input/event5"
[ 2490.951] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[ 2490.951] (--) evdev: USB Keyboard: Found 1 mouse buttons
[ 2490.951] (--) evdev: USB Keyboard: Found scroll wheel(s)
[ 2490.951] (--) evdev: USB Keyboard: Found relative axes
[ 2490.951] (II) evdev: USB Keyboard: Forcing relative x/y axes to exist.
[ 2490.951] (--) evdev: USB Keyboard: Found absolute axes
[ 2490.951] (II) evdev: USB Keyboard: Forcing absolute x/y axes to exist.
[ 2490.951] (--) evdev: USB Keyboard: Found keys
[ 2490.951] (II) evdev: USB Keyboard: Configuring as mouse
[ 2490.951] (II) evdev: USB Keyboard: Configuring as keyboard
[ 2490.951] (II) evdev: USB Keyboard: Adding scrollwheel support
[ 2490.951] (**) evdev: USB Keyboard: YAxisMapping: buttons 4 and 5
[ 2490.951] (**) evdev: USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.951] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.1/0003:04D9:0274.0006/input/input7/event5"
[ 2490.951] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 13)
[ 2490.951] (**) Option "xkb_rules" "evdev"
[ 2490.951] (**) Option "xkb_model" "pc104"
[ 2490.951] (**) Option "xkb_layout" "us"
[ 2490.951] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.952] (II) evdev: USB Keyboard: initialized for relative axes.
[ 2490.952] (WW) evdev: USB Keyboard: ignoring absolute axes.
[ 2490.952] (**) USB Keyboard: (accel) keeping acceleration scheme 1
[ 2490.952] (**) USB Keyboard: (accel) acceleration profile 0
[ 2490.952] (**) USB Keyboard: (accel) acceleration factor: 2.000
[ 2490.952] (**) USB Keyboard: (accel) acceleration threshold: 4
[ 2490.952] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 2490.952] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 38 paused 0
[ 2490.952] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 2490.952] (**) Eee PC WMI hotkeys: always reports core events
[ 2490.952] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[ 2490.953] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 2490.953] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 2490.953] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 2490.953] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input12/event9"
[ 2490.953] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[ 2490.953] (**) Option "xkb_rules" "evdev"
[ 2490.953] (**) Option "xkb_model" "pc104"
[ 2490.953] (**) Option "xkb_layout" "us"
[ 2490.953] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.953] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 2490.953] (II) No input driver specified, ignoring this device.
[ 2490.953] (II) This device may have been added with another device file.
[ 2491.022] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2491.022] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[ 2491.022] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2491.034] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2491.034] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[ 2491.034] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
Last edited by H3g3m0n (2015-04-01 00:11:52)

WonderWoofy wrote:I'm not sure about your VT issue, but if you set the 'terminate:ctrl_alt_bksp' option with setxkbmap or loginctl, does it work then?
I tried setxkbmap before without success.
Also tried:
localectl set-x11-keymap "us" "" "" "terminate:ctrl_alt_bksp"
Not sure how to go about using loginctl to do the same thing.
Last edited by H3g3m0n (2015-04-01 03:25:35)

Cannot switch to tty with CTRL+ALT+F?

Hi everybody,
I'm sitting in front of a fresh archlinux installation with kdemod installed. I notice that I can't switch to the terminals with CTRL+ALT+F?. I always used this kind of switching without configuring anything, so what could have gone wrong?
Thanks for any suggestions...
EDIT: by accident I wrote the german "STRG" instead of "CTRL"
Last edited by Kei (2007-07-09 16:40:00)

i've got the same problem here
I can kill sessions via CTRL+ALT+BKSP and navigate from vt1 to vt2 etc.., but not from X to any other terminals!
Global shortcuts don't seem to work either, might be a related problem!?
Output from xev for CTRL, ALT, F1
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1772087, (-158,305), root:(878,360),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1774643, (-158,305), root:(878,360),
state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1774702, (-158,305), root:(878,360),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776252, (-158,305), root:(878,360),
state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776307, (-158,305), root:(878,360),
state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776962, (-158,305), root:(878,360),
state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1777014, (-158,305), root:(878,360),
state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
and my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "uk"
Option "XkbOptions" "grp:ctrl_shift_toggle"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "139f"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "AGPMode" "8"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "UseFastTLS" "2"
VendorName "ATI Technologies Inc"
BoardName "Radeon R250 [Mobility FireGL 9000]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "DontVTSwitch" "False"
Option "DontZap" "False"
EndSection

Opensource ATI can't switch video modes with CTRL+ALT+plus/minus

Hi,
I've updated my system to the new xorg-server and video driver.
The new video driver (xf86-video-ati-6.7.195-1) can't switch video modes with the CTRL+ALT+plus/minus key combination. I use this key combination a lot and before I upgraded to the new driver this worked :-(
Anybody else having this problem?
I know I can use xrandr to change the video mode, but it doesn't exactly do what I want. Xrandr changes the video mode, but also changes the resolution of the screen, while CTRL+ALT+plus/minus keeps the resolution intact (the screensize is bigger than what is seen on the monitor, you can scroll the screen by moving the mouse "out" of the monitor)
Is there a fix/patch that I can try?

It looks like this is the result of the new opensource ati drivers use the new xrandr.
One of the changes is that it will treat the screen section in xorg.conf differently. Browsing through video modes, using the CTRL+ALT+plus/minus key combination, that are defined in the screen section in xorg.conf is not possible anymore.

PulseAudio stops sounding when I switch to other display (Ctrl+Alt+F1)

Similar Messages

Maybe you are looking for