Punch! Home Design Studio videos? tutorials? demo/trial?

hey guys
i've been looking for a good architecture practice and design program for my new MacBook and came across Punch! Home Design Studio. http://www.punchsoftware.com/products/mac.htm#
it seems like a pretty good program but i was wondering if anyone knows where i can find a demo or trial for it or if there are any videos or tutorial videos out there showing it off?
also if anyone has used it before feel free to voice your opinion of the application..
thanks!

Hi Ron and welcome to our community
If Captivate fails to record in full motion (which can happen
because of an incompatibility between it and your other
application) you may need to use other software. Perhaps try Fraps.
(It's often used to capture video games being played).
http://www.fraps.com/
You should also report this to Adobe as a possible bug. You
may do this by
clicking
here and completing the form.
Cheers... Rick

Similar Messages

  • Punch Home Design Studio

    I received an early Christmas present from my son and daughter in law, the subject Punch Home Design Studio software. I have been wishing for a low end cad package and this is what they came up with.
    Before I break the seal and make it non-returnable, does anyone have experience with this package? Will it do what I want which is simple floor plans and layouts.
    I should mention that this is a newly released package for Mac Universal so no need to operate in Windows.
    Thank you for any advice
    john

    might want to check the website
    http://www.punchsoftware.com/products/mac.htm

  • Punch! Home Design Studio Pro for the MAC

    Hi, I apologize if this post is in the wrong place, but it's the only place I could find to post it: Has anyone used the new "Punch! Home Design Studio Pro for the MAC". I understand it's more in-depth than Punch! Home Design Studio. My wife and I are looking to design our own home, or at least get the general wants and needs down before going to an architect and this program was recommended to me by another Mac user (although he actually never used the program). Any insight would be greatly appreciated into the Punch program or any other home design program for the Mac that may be available.
    Thanks!

    Welcome to Discussions - these pages are for Mac related problems, try going to the web site of whoever publishes the application and see if there is a user forum.

  • Home Design Studio 15 limitations?

    Just purchased and downloaded Home Design Studio 15. It will not allow me to save, print or export a design. All this for $149?

    Hi Lyle...
    What you need to do is contact the developer >  http://support.encore.com/
    While you are waiting to hear back, installing the Mac OS X 10.6.8 Update Combo may help.
    It's ok to do this even though you are already running v10.6.8
    Restart your Mac after the combo is installed, then try launcing the HDS app.
    Apple's refund policy states, "All sales and rentals of products are final."   iTUNES STORE - TERMS AND CONDITIONS
    But considering the price of the app, I don't think asking for a refund is out of line. At least try  >   Mac App Store - Contact Support

  • Downloaded Home Design Studio 15 and it won't open

    I've downloaded Home Design Studio 15 from the App Store. It shows up as installed in my purchases in the App Store and in my Applications folder, but when I tried to open it, it flashes briefly on the dock and then disappears. The icon was on the dock when it first downloaded but it only bounced a few times before stopping. I've tried restarting my computer, opening it from the Application menu, looking in the content packages, but I don't know what to do. Should I get a refund and try download again or is there another solution?

    Hi Lyle...
    What you need to do is contact the developer >  http://support.encore.com/
    While you are waiting to hear back, installing the Mac OS X 10.6.8 Update Combo may help.
    It's ok to do this even though you are already running v10.6.8
    Restart your Mac after the combo is installed, then try launcing the HDS app.
    Apple's refund policy states, "All sales and rentals of products are final."   iTUNES STORE - TERMS AND CONDITIONS
    But considering the price of the app, I don't think asking for a refund is out of line. At least try  >   Mac App Store - Contact Support

  • Win 7 64-bit, Intel 4600 graphics hangs when running Punch home design software

    Punch Home and Landscape Pro V17.7 runs great on T500 Win 7 32-bit... all rendering is quick and accurate. This same design program opens, but hangs immediately when any attempt is made to modify the design.
    I have posted to the Punch support site. When I called Tec, he said that my version would run on 32-bit or 64-bit machine.
    It appears all program components are in the Programs (x86) directory and the Registry seems to have the proper paths and entries (beyond my level of expertise to modify.)
    I also read the post regarding the latest Intel Iris 4600 driver on the Intel website, and I could follow this procedure to install the latest driver... but I would be DOWN if the driver did not work.
    So, anyone have any ideas as to the proper steps to solve this issue?
    DRC

    I see. Unfortunately you can't install the generic Intel driver on Haswell systems without losing brightness control. (You can still try installing it using Device Manager > Have Disk.)
    Which version of the driver are you running now?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Illustrator video tutorials and demos

    Impossible to watch Illustrator video tutorials and demos. Sound is ok but no image. What's wrong?

    You're welcome, Babsh.

  • Video Tutorials DVD Studio Pro 4

    Hello,
    Can you please advise where can I find online video tutorials to learn how to master the DVD Studio Pro 4. I do not see that Apple has a video tutorial online - for the extended and advanced window of DVD SP.
    Thank you

    http://www.google.com/search?client=opera&rls=en&q=DVDStudio+Pro+4+videotutorial&sourceid=opera&ie=utf-8&oe=utf-8

  • Tutorials, Videos and Demos on Spaces Functionality

    Has anyone found any good Tutorials, Videos and Demos on Spaces Functionality? Like Using the Wiki and Blogs and the other uses of spaces?
    I loved to fine a "WOW look what spaces can do" Video.

    As for tutorials, check http://docs.oracle.com/cd/E21764_01/webcenter.htm (there is one for Spaces users)
    As for videos, there are quite a few videos available on YouTube http://www.youtube.com/results?search_query=webcenter+spaces&oq=webcenter+spaces&gs_l=youtube.3..0j0i5.1353.3846.0.4059.16.9.0.0.0.0.583.1753.2j3j0j2j0j1.8.0...0.0...1ac.1.GrKsnCAdIJw
    Check also http://download.oracle.com/otndocs/tech/webcenter/files/11gspacesdemo_viewlet_swf.html
    As for demos, there used to be a VM on PS3 - unfortunately, it's no longer available (we are at PS5). Check this link for updates: http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/owcs-portalfw-vbox-284132.html

  • Using Virtual PC to run Punch! Home Design Architectural Series?

    Hi. Love my Mac, however I got a Christmas gift of some Home Design software which turns out to be a Windows only type deal...I would love to use it on my Mac and am considering the Virtual PC as a solution to do so.
    I've read enough of the topics to see it may not work as well as I'd hope. Has anyone tried it before?
    What would I need to consider before trying it?
    (I searched and didn't see this topic here yet, but if I missed it, forgive..!)
    -K
    17" G4 PowerBook   Mac OS X (10.3.9)  

    Thanks O!P. I thought that might be the case...I don't think I'll even try VPC on my Powerbook.
    Strangely, there is very little design soft like this available for Mac. If anyone knows differently, let me know! I guess we Mac users tend to be creative to the point of not needing to be handheld (like I need with this software) to do design work. There are Drafting progs and some CAD stuff, but those are pretty advanced (for me) and don't usually have the formats and tricks that this program has. I think there is a thread somewhere discussing that lack of Mac oriented design software here...
    If I get the time, I'll send my request to the company to work up a Mac version, but I won't be holding my breath.
    Again, thanks!

  • Punch Home Pro Platinum

    I am using Punch Home Pro Platinum software. It allows the
    architectural design of homes. When I click on Live view it turns
    the 2-D version of my blueprint into a 3-D version. You then can
    either walk around the design or click on the fly around button and
    you can hover around the design in a helicopter. I want to capture
    the fly around for a movie ad i am making for a client and can't
    seem to figure out what settings to use. I am using the demo trial
    version of Captivate if that helps.
    Here's what I do:
    Click on record or create a new project.
    Click on software simu;ation.
    Click on custom size. OK.
    Choose the Punch window.
    Choose full motion recording.
    Click record.
    I then hear a camera shutter sound and my cursor turns to an
    hourglass.
    An icon in the sytem tray starts flashing and then it seems
    to lock up.
    If I choose recording mode/s I can get it to take a "photo"
    of the screeen each time I click the mouse but no movie.
    HELP!!!
    Ron

    Hi Ron and welcome to our community
    If Captivate fails to record in full motion (which can happen
    because of an incompatibility between it and your other
    application) you may need to use other software. Perhaps try Fraps.
    (It's often used to capture video games being played).
    http://www.fraps.com/
    You should also report this to Adobe as a possible bug. You
    may do this by
    clicking
    here and completing the form.
    Cheers... Rick

  • SAP Design Studio SDK Editing

    Hi,
    I am an SAP BIBO consultant. One month before I started using Design Studio 1.2.
    Is there any document that will help in BIAL coding???.
    Can anyone please show me from the scratch how I can edit the existing standard components in the Design Studio through SDK. I have tried up the addition of Custom components(Colored Box, Google Maps) in Design Studio. That worked fine. But my issue in modifying or editing existing components. How I can import those standard components to Eclipse and how to start editing???
    Also one more thing, please show me from where I can download the UI Development Kit (SAP UI5) for Design Studio 1.2. and how to install the same.
    I am using,
    Eclipse Helios
    JDK 1.6
    Please help me in this........
    Regards,
    Arun Krishnan.G

    Hi Arun,
    In answer to your questions:
    1.  You can learn about BIAL scripting through the following resources:
    Design Studio Application Designer Guide
    Design Studio Tutorials
    Getting Started with SAP BusinessObjects Design Studio
    Design Studio e-book
    2.  It is not possible to modify the functionality of the standard Design Studio components via the SDK.  You can however modify the appearance of standard components by applying CSS as shown in this tutorial video.
    3.  You do not need to download the UI5 Development Kit to incorporate UI5 controls into SDK components.  To access a UI5 control you need to develop the component using Handler Type "sapui5".  The approach is described in Section 6 SDK Extensions Using SAPUI5 Controls of the Developer Guide.  You can also download the SDK Templates and Samples which include UI5 examples.
    Regards,
    Mustafa.

  • Video Tutorials are WHERE?

    a quote from the "installing your software" pamphlet:
    "Logic Studio Demo Songs and Tutorials DVD: This DVD contains a collection of demo songs and video tutorials for your Logic Studio applications. The disk is also a DVD-Vdeo, so you may view the tutorials using the DVD Player application or any compatible, stand-alone DVD player."
    i see NO video tutorials on my demo content DVD. DVD player sees nothing.
    anyone know where the video tutorials are?

    **** it!
    from the late breaking news pdf
    "Tutorial and Content DVD Is Data Disk Only
    The Logic Studio Demo Songs and Tutorials DVD described in the Installing Your
    Software manual has been renamed to Logic Studio Demo Content. It is a data disc
    only, and cannot be played on a DVD player or in a DVD player application."

  • Missing video tutorials, 3rd-party plugins

    All,
    I just purchased Logic Studio and the documentation states that there are video tutorials on the Demo Content DVD. Yet when trying either my iMac's DVD player, or my hardware DVD player the videos are nowhere to be found. Not, luckily, that I'm struggling to use Logic 8. Still, what gives?
    Also, I'm wondering whether it's possible to get 3rd-party instrument plugins (and ideally, their respective sound libraries) to show up in the Logic 8 browser, and/or if there are certain developers who are committed to supporting this level of compatibility with Logic 8.

    just purchased Logic Studio and the documentation states that there are video tutorials on the Demo Content DVD
    In the late breaking news document, it mentions that this content was not included after all. The Demo content does not feature any tutorial material.

  • Design Studio access from outside the network

    Hi!
    I've got a problem with Design Studio 1.2 SP01. Everything works well, if I access everything when I sit in the office. If I'm at home and I chose "Add Datasource", I can select a Universe, but if I want to build a query "Edit Query Spezification", I get the following error:
    Failed to create CMS session (see error log for detail)
    Caused by: com.crystaldecisions.sdk.exception.SDKException$OCAFramework: Server demo.comp:6400 not found or server may be down (FWM 01003)
    cause:com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$NotFoundInDirectory: Server demo.comp:6400 not found or server may be down (FWM 01003)
    cause:java.net.UnknownHostException: demo
    detail:Server demo.comp:6400 not found or server may be down (FWM 01003) demo
    detail:Server demo.comp:6400 not found or server may be down (FWM 01003) demo
    Our server is named demo.comp and can be accesed if you are inside the company network. I can access the Server via comp-demo.com from the Internet, but if I use the Designer, I get the error described above.
    Thanks in advance!

    Could a Mod please move this to Design Studio space for answers? Tammy Powlas
    I already read through a bunch of threads, without finding an answer
    Thanks a lot!

Maybe you are looking for