Punch in gets burried

Using CS6, when I punch in to an existing track when multi track recording, then click anywhere on the original track, the punch in gets burried. How can I prevent this?

I don't think you can stop it
You can select 'Clip' from the menu and then select 'Send Clip to Back' but what you might want to do is set up a hotkey to 'Send Clip to Back' so you just have to hit one key

Similar Messages

  • Hello ...  I have a problem with a wifi connection speed on my mac pro ... the problem is that in one room the internet opening for the websites is extremely slow ... but when i move the mac pro somewhat to other location ... the internet speed increase

    hello ....
    my connection problem on my mac pro is :
    that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
    but when i move the mac pro to another location ... its internet opening speeds up ....
    also in one room ... web opening delays .... but on other rooms it is normal
    so what can i do to solve this problem ....
    Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
    thanks for you all ...
    Waiting for your support ... as quick as possible ...

    WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
    Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
    The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
    If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
    https://www.open-mesh.com/

  • Slideshows on HD TV's

    I am using DVDSP to make slideshows. When I am in the Simulate mode of DVDSP, I can switch from SD to HD720, and to HD 1080. When I go to the HD modes, the picture gets burry. How can I made Standard DVD's using my slideshows from DVDSP that will not get blurry when they are played on HD Screens?
    Kevin Hawkins

    Have you actually authored a SD DVD and played it on a LCD or plasma HD TV?
    We have, and with a progressive scan DVD or an upconverting HDMI hookup, they don't look blurry

  • Simulation-failure captions won't display

    The failure captions won't disply in a simulation, only the hint caption. I removed other interacitve buttons and it still doesn't work.

    I've created a simple project that recreates this issue, with hopes that someone here or someone from the Captivate team can take a look and see if I'm missing something, or acknowledge as a bug. 
    http://www.eternal-visions.com/FailureCap.cptx.zip
    If you test the project, as is, the failure captions will not work.  If you uncheck the "remain on top" box of the smart shape button on slide 1.. failure caps return.  But, then the smart shape gets burried under other objects.
    Thanks for your time. 

  • Blogging

    I want to create a blog. One that has topics and people can post under my topics. For instance my first post would be events and I would want everyone from my group to post their events. The problem is comments gets burried. Is there anyway to change this?

    Hi, snauddy. Welcome to the Nokia Support Discussions! You can check the Store for all available blog apps for your device. You can also check this link for the search results for Blog apps:
    http://www.windowsphone.com/en-us/store/search?q=blog
    Hope this helps.

  • I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4

    I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4

    WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
    Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
    The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
    If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
    https://www.open-mesh.com/

  • How can E72 be so bad in so many ways?

    Looks nice, but terrible to use.
    - the camera stalls every second time you start it
    - the navigator, works fine, but when you go to the Favourites, the first choice is to synchronice with Ovi. Every time I have to take an extra push down to get to my favourites, then another punch to get eventually to favourites. how easy is that?
    -I tried to get some pictures from the camera to my computer. Thats a NO. the files are in use, you cannot copy-paste them. You have to use Nokia software, and thats still running while Im writing this. takes ages. terrible.
    -try to take a picture and put that to your facebooks account. 17 keyboard punches it takes. a terrible little phone. first take the picture, then go to your facebook, look it up from the ten different folders, see that you dont know which one it is (no thumbnails of the pictures), close facebook, back to your pictures, give it a name, back to facebook, look it up again from the ten different folders, and its there! took an hour.

    an it continues. Nokia sends me an textmessage to get some updates. theres a link to the web site, but you cannot open it from the textmessage! or to copy paste it to your computer. and then it doesnt work in the computer, if you type it there.I mean Hello there!!!!

  • Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

    Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

    The obvious answer I think is that maybe you are not entering the letters and numbers correctly. I almost never get it right the first time when I use a gift card.
    Try entering the code again - slowly and methodically. If it still doesn't work - look here for help.
    http://support.apple.com/kb/TS1292
    One final thought - if you are using a gift card that was purchased in another country - say like you have a Canada gift card and you live in the U.S. - that card will not work in the U.S. iTunes store.

  • Multiple items not getting transfered from Punch out

    Hi,
    I need your help in fixing an issue with punch out.
    When we select more than one item in the punch out and when it is getting transferred to SRM shopping cart, we could see only one item in the shopping cart. We are facing this issue with only one punch out.
    While trasnfering item(s) from this punch out, we are getting the message "Number of external bid is empty" in SLG1 log. I have checked the XML file sent by the punch out and there I could see all the items that has been selected. But once it gets transfered to SRM shopping cart, it is transfering only one item.
    Not sure if this is a problem in SRM or punch out. If it is a problem in SRM then I hope it should occur with all the punch outs. But we are facing this issue with only one punch out.
    I am trying to debug this process in SRM. For that I need to know the exact BADI or BAPI which is receiving the items from punch out. Could you please help me in that?
    Also I would like to know, is there anything would happen after the XML file has been generated in punch out and before it has been received by OCI.
    We are in SRM 4.0 with extended classic scenario.
    Thanks,
    Arun

    Dean,
    We have implemented that BADI. As I mentioned earlier, problem is occuring with only one punch out we are using. With other punch outs it is working fine. More over, when I tried to debug through this BADI I am getting a dump error:
    No additional external fashion for New ABAP debugger available
    What happened?
    The ITS services u201Ebbpsc03" had to be interrupted because the WebAs sent the following error message. 
    Error message:  "No additional external fashion for New ABAP debugger available".  Message type:  "E"
    Error analysis
        It became receive an error message of the WebAs.  For the reason picture of the error message (program:  u201ESAPMSSY3" Dynpro number:  131) no Template was found, must interrupted become the ITS services
    therefore.  Remove if possible the mistake cause.  First if the mistake cause is removed and therewith the error message is sent by the WebAs no longer, again lauffähig is these ITS services. 
    Do you have any idea what the dump is?
    Thanks,
    Arun

  • I have new Ipod which shows mail,but when I punch to see all I see are the mail providers. The mail is set up correctly but I can't get rid of the providers to see my e-mails. Help??

    I have new ipod touch which shows mail messages, but when I punch to access, all I get are mail providers. How can I get rid of mail providers and see my messages since the correct mail providers are set up already?

    I do not know what you mean by "punc to see all mail provider".
    And also what does "I can't get rid of the providers to see my e-mails".
    Maybe this will help
    iOS: Troubleshooting Mail

  • I have one key on my keyboard that I have to punch hard to get it to work. How do I fix this?

    I have one key on my keyboard that I have to punch hard to get it to work. How do I fix this?  Does a laptop have the same capability to pop off the keys and clean them like desktops do?

    Welcome to Apple Support Communities
    Connect the external drive and open a Finder window pressing the Finder icon in Dock. Then, drag the folder to Finder, so it will be copied to this external disk.
    If you can't copy this folder, probably you have to format the external disk or use an app that allows you to write in that external drive. Mac OS X can't write in NTFS external disks

  • Help! Cannot Get Garageband 11 to allow me to punch in / out

    So I'm trying to basically punch in / punch out with Garageband 11, but I'm having some trouble. I'm trying to use the cycle region feature, as instructed in the manual under the heading "Record over a specific part of a project". But everytime I do that it simply starts recording take after take. And it only keeps the section I set with the cycle ruler, the rest of the track gets totally muted by a new take being layed across the top of it. This isn't supposed to happen when using Real Instruments. From what I've read I should be able to fix mistakes by punching in and and out with the cycle region setting. According to the manual, it should record the new part once then play it back, and hopefully seemlessly fit with what has left of the original track recording. None of this is happening.
    However the manual seems to indicate that the same procedure is used for recording multiple takes. Is there a way to switch between the two modes (recording multiple takes vs. recording over a part of a track)? Is this just a big flaw in this version of Garageband? Any help would be greatly appreciated.

    The track is always muted when you record on it, so you will never be able to hear the passage right before your recording starts. If you want to accomplish that, duplicate your track and record on the second one.

  • We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

    SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
    When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
    Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
    Thanks
    Jayant

    Hi,
    Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version  for SAP solutions. Many of your problem will get resolved with it.
    Question 1:
    So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
    For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
    Generate EarlyWatch report for more detailed view
    Question 2:
    My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
    The libttsh11.so library cannot be found in the related directory.
    Cause
    The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
    Such a configuration will cause, installation, relinking and other unexpected problems.
    Solution
    Disable the CIO option on the filesystem.
    References
    NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
    Hope this helps.
    Regards,
    Deepak Kori

  • Why when i punch in i get a long pause before it records

    this is not useful because it interupts the flow of the playback and throws the artist off.
    is there a setting i need to check on or off to fix this?

    http://discussions.apple.com/thread.jspa?messageID=2439247&#2439247
    i think that justin C might have answered my question. i will try and reply back.

  • Getting Page Load Error while opening a Opportunity in new window

    Hi All,
    outbound SSO is enabled.
    when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
    Do i need enable any settings in CRM
    thanks

    when the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
    Is there any setting in CRM Ondemand to send Http request only instead of HTTPS?

Maybe you are looking for