Punched audio regions are visible but wrong older pass plays back.errgh

This has happened to me before. VERY FRUSTRATING. Why aren't the latest punched in audio regions sounding even after you trick the arrange window into showing them.(I hate that you have to click all over the place to get regions with punch-ins to behave visually)..and some times what you see is not what you get to hear.I end up deleting old passes in the audio window until the one take is the only one left.This is a terrible workaround.I do not want to use toggle erase mode either.Just want to hear what I see in the arrange window.Any suggestions, settings, modes I might be missing ? It's getting difficult to trust punching in audio when a crucial take is getting lost under layers, or isn't there for review immediately !!
G5 Dual 2.7 Mac OS X (10.4.3) Logic 7.1.1 motu 828mkII

pardon,I'm a little confused... Scenario:Not using cycle record. One track for a lead vocal.I puch in vocal phrases.Is there a technique for going back to earlier pass takes and lock a take in the arrange window if I want to ?Why create duplicate tracks?I do not want to create extra tracks,want the lead vocal to be on it's own single track that has punches.I usually only want the most recent punch as I move on after a good take.In this current song I rewind happy to hear my performance but I end up seeing it(the punch)but hearing and underlying take ??? Why. PLease elaborate. Thanks ~
G5 Dual 2.7 Mac OS X (10.4.3)

Similar Messages

I Photo, I Movie, and Photo Booth Icons are visible but when clicked on won't open.

What can I do? I Photo, I Movie, and Photo Booth Icons are visible but when clicked on won't open.

What happens when you try?

After loading FF4 the back/forth buttons are visible but not functional. Have tried to reset tool bar etc. no luck. fix please

After upgrading to the new version everything seems to work well except my back/forth button on the browser are visible but grayed out and not functional. I have tried all of the suggestions in help and am unable to bring them to life. Very frustrating to use a browser with out these functions. I run 4 websites and it is maddening to have to keep reloading the sites just for simple work.
I have to have these working or will be forced to use another browser. I liked the old FF much better. I can not tolerate this much longer.

I notice from your system specs that you're running a very old version of Flash. Could you try updating to the latest one which is 10.2.159.1 It also contains a patch to fix a recently discovered [http://www.h-online.com/security/news/item/Adobe-releases-security-update-for-Flash-Player-1228930.html Zero Day exploit]. You can get it from here: http://get.adobe.com/flashplayer/
Have you experienced any unusual events watching Flash videos lately? It's possible that you may have been a victim of just such an attack. It might be worth doing a malware scan using this well-known scanner from http://www.malwarebytes.org/ The free version is more than adequate to eliminate any current threats.

How do i make the back and forward buttons function? they are visible but not functional.

I have firefox 8.0.1 and my back and forward button are not working. They are visible but not functioning. I have tried starting in safemode and without any add-ons and the back and forward buttons are still not functioning. What do I need to do to make the buttons functional?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

Jim, that sounds like a good hypothesis. Yes, I am using smart previews. I have my originals on an external drive which is connected. Still, LR can not find them. Do you know how to tell LR where to find the originals? I would like LR to identify the source automatically: if external drive is connected LR should show "original and smart preview" not only "smart preview". Thanks for your help.

My synced Photos on the iPhone are wrong. The Thumbnails are correct but wrong pictures appear if i open them. What can I do?

my synced Photos on the iPhone are wrong. The Thumbnails are correct but wrong pictures appear if i open them. What can I do?

There is no list of authorized computers. Where do you see a list?
You must be talking about something other than authorization. Please clarify.
iTunes Store: About authorization and deauthorization

HT203167 I bought two audio books on iTunes but they will not play. My old books play without issue but the new ones do not.

I bought two audio books on iTunes but they will not play. My old books play without issue but the new ones do not.

Did you copy your actual iTunes content from your computer before reinstalling iTunes, or did you just copy your iTunes library which only contains the pointers to your songs / books locations ?
You might, depending upon your country and if they are still in your country's store, be able to redownload your music purchases and your ibooks via the Purchased link under Quick Links on the right-hand side of the iTunes store homepage - you will need to delete the entries from your library (where you are getting the 'unable to locate' messages) before they will potentially show with the cloud icon against them in Purchased for redownloading.
Or copy them from your backup of your downloads/library and add them to your iTunes library via File > Add To Library

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

TS1717 I can play audio files in iTunes but I can't play downloaded tv shows or movies. Everytime I attempt to play them, iTunes stops working and closes.

I can play audio files in iTunes but I can't play downloaded tv shows or movies. Everytime I try to play them, iTunes stops working and closes. Any information will help.

Is QuickTime installed? If not it might help to install it.
If so is Direct3D Video Acceleration enabled? If so it might help to disable.
tt2

I try to change language, but wrong flag keeps coming back on menu bar!

Hi, i've an old G4 quicksilver, I try to change language from original french to italian, but wrong flag keeps coming back in the menu bar... i changed the battery inside (i thought it was that), but no result,
any ideas?
thanks in advance

Hi, try this...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.HIToolbox.<12digitHexNu mber>.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.HIToolbox.plist
Reboot & set it up again.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

TS1424 i downloaded an album from i tunes, but it will not play back correctly,tracks stop half way through and skip to the next one. what can i do???

I downloaded an album from i tunes, but it will not play back correctly,
it starts a track and then stops randomly and jumps to the next track
and then does the same thing ad ainfinitum! What to do??

Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

USB Recording Audio Interface levels are visible but no sound.

I have a Focusrite Scarlett 2i2 2 In/2 Out USB Recording Audio Interface hooked up to my iMac via USB cable.
On the System Preserences Sound Page, the computer recognizes the device and levels are visible.
But there is no sound coming out of my internal speakers/headphones.
I tried recording some music and it recorded fine and played back fine, I'm just unable to monitor the sound as it's coming in.
I've also tried a completely different device with the same outcome.

No, you have every business being here as any help is greatly appreciated.
When you say "core audio" what are you referring to?
Ok, here's what I see in the system preferences->sound window:
Output is set to Internal Speakers
Input is set to my device, the Scarlett 2i2 USB
When I play sound thru the device I can see levels where it says 'Input level'.
Now here's the MIDI setup->audio devices window:
Input is set to Scralett 2i2 USB (hightlighted in the left window with a microphone icon next to it).
just below that it reads 2 in/ 2 out
Output is set to Built-In Output (hightlighted in the left window with a dual smling face box icon and a speaker icon next to it).
just below that it reads 0 in/ 2 out
On the right is the Ch/Volume/Value/dB/Mute wondow
Master volume slider is in Light Grey and un-slidable
1 and 2 are Dark Grey and slidable.
That's pretty much it, sound comes in fine yet no sound from interal speakers.
Now I feel a crying spell coming on. Excuse me. Weep weep weep........

Audio files are there, but there is no sound. Final Cut v1.0.1

I have been working on a project in Final cut express v1.0.1 for a few days. At first, there were no problems with audio, then I tried to open the file on a friends machine using final cut 2 (my final cut program and scratch disc are on an external drive). I was prompted to update my project so it would be FC2 compatible and I chose not to. We were not able to view the project on my friend's machine. When I try to play the project now, there is no sound even though all audio files are in place.
It might be worthwhile to note that before trying to view the project on my friend's machine I created a "final cut movie file" which will play with audio on either machine in Quicktime but not in Final cut.
Any help or advice about what I should do to fix this would be much apreciated, Thanks.
G4 powerbook (older one) Mac OS X (10.3.9)

Thank you for the response but unfortunately it did not resolve my problem, View>Video is set to real time and not firewire (the options are greyed out and cant be selected but there is a check by "Real Time" regardless)
Still unable to get sound, thanks for the attempt.
G4 Powerbook (older one) Mac OS X (10.3.9)

All my itunes files are visible but none will play. Error message file cannot be found

All my track file names and other details are visible in Itunes but none will play. single click on a track and an exclamation mark embeds at the front of the track name bar double click or click play and the error message I get says, "The song could not be used because the original file could not be found. Would you like to locate it? A search doesn't find it.
This applys to every track on itunes but music files in the music folder in Finder still play. Can anyone Help please

Is it possible that you moved the iTunes Media folder using Finder (or renamed something along the path)? The reason this happened is because iTunes cannot find the song files where they were previously located. However, you know where they are located (in the "music folder," so you can find the files using Finder and play them.
That you need to do is to put the files back where they were previously located. If you need to change the location of the files, you can use iTunes to move the files, so that iTunes can keep track of their new locations. This article provides instructions
http://support.apple.com/kb/HT1449

On my iPhone 4s the video play back , the audio is very low . All other audio is good on phone even older video plays nice and loud . I have no idea what is wrong?

On my iPhone 4s taking video then playing back ,the audio is so low you can barely hear it . I played older videos and the audio works perfect . All other audio works perfect on the phone too. I have no idea what is going on ?

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

Punched audio regions are visible but wrong older pass plays back.errgh

Similar Messages

Maybe you are looking for