Punkbuster problem finally fixed?

Well according to the Inquirer it will be. And it turns out it's ATI's fault?
http://www.theinquirer.net/?article=19501

there's still problems ( less frequently ) with nvidia cards too..
RainZ

Similar Messages

  • Vista Bootcamp Freezing Problems *Finally Fixed*

    I've been dealing with hard freezes through Vista since I first got this Macbook pro; I've tried changing the graphics drivers and all the other little tricks people said to use and none of them worked. I finally figured out that if you install "Windows Ultimate" with SP1 than it doesn't freeze. (at least for me) I've been installing "Windows Home Premium" with needing to install SP1 afterward.
    I'm not sure why this has worked for me. Possibly because I can install the drivers AFTER SP1 is installed. Anyone have any idea? Did I just get lucky?

    what's working for me so far is installing the latest drivers from laptopvideo2go.
    So far so good, no freezes or blue screens.
    The only problem that still remains is my screen flickering/pulsing at low brightness levels. If I put brightness to half or above the flicker goes away.
    Message was edited by: Aunty June

  • Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!  SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

    The issue:  Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! 
    SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
    The cause:  It is now clear what caused this problem.  For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.).  In May 2012 I decided to make some of them one hour  events so I could add alerts to remind me of the event.  I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
    The symptom:  Syncing stopped working for the calendar but continued working for contacts and notes.  I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious. 
    The failed attempts:  I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance.  From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012.  Events before May were in both Outlook and the iPhone but events after May were only one or the other.  Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious.  MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things.  We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
    The fix:  After 18 months of frustration, MANY  hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync  problem and it indicated all day events were related.  I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events,  sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
    After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync.  It synced for the first time in 18 months! 
    Problem occurred May 2012 – fixed Nov 2013

    Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
    It will recursively remove all '_ModGrp...' folders
    Sub RemoveFolders_Click()
        Dim oOutlook As Outlook.Application
        Set oOutlook = New Outlook.Application
        Set objNameSpace = oOutlook.GetNamespace("MAPI")
        Call CleanFolders(objNameSpace.Folders)
    End Sub
    Sub CleanFolders(objFolders As Outlook.Folders)
        For i = objFolders.Count To 1 Step -1
            If Left(objFolders(i).Name, 7) = "_ModGrp" Then
                objFolders.Remove( i )
            Else
                If Not objFolders(i).Folders Is Nothing Then
                    Call CleanFolders(objFolders(i).Folders)
                End If
            End If
        Next i
    End Sub

  • How to Link equipments(PM) in a Settlement from AUC to Final Fixed Asset

    Hi All,
    I need your help with an integration problem between AA, CO and PM.
    This is the scenario:
    We are buying equipments that should not be capitaliazed until deliver them to the customer so to support this we do the following flow:
    1. Create an sheduling agreement for the whole year with and AUC and a statistical Internal Order.
    2. We create a 'Good receipt' for purchasing equipments(PM) againts the scheduking agreement. At this time we store the equipments in a specific storage location and those equipments are not capitalized. The equipments are create automatically.
    3. We deliver the equipments to the customer, not necessarily all purchased equipments.
    4. Monthly we have to capitalize the equipments that were delivered to the customer so we create a final fixed asset and execute the settlement of the AUC againts that final fixed.(First AIAB to create settlement rule and then AIBU to distribute)
    Problem:
    When we execute AIAB for the step 4 we can not link the equipments with the final fixed asset, in the settlement rule we have to calculate manually the percentage or the amount that shoul be settle according to the equipments that were deliver to the customer, but we would like to:
    1. Link the equipments to the final fixed asset.
    2. Update the material and quantity in the FI posting line item.
    3. Update the quantity field in the final fixed asset master record automatically.
    Do you have any idea?
    Many thanks in advance.

    Hi,
    Please check in the screen layout for Asset Master. I think the equipment field is available.

  • Mac OSX NOT GETTING IP ADDRESS BECAUSE OF THE DHCP(FINAL FIX)

    You may get some errors when trying to connect to the wireless connection.
    LIST OF PROBLEMS:
    -Auto-Assigned IP with 255.255.0.0 Subnet Mask and a 169.x.x.x IPV4 Address
    -Unable to renew the DHCP beacuse the DHCP doesn't send the IPV4 address to your iMac/MacBook
    -No IP
    FINAL FIX:
    -Log to the Router Configuration page inserting the default gateway address in your browser bar(It should be 192.168.1.1 though my default gateway is 192.168.0.1.....nevermind).
    -Go to DHCP tab and make sure that DHCP is ENABLED
    -Go to Wireless Settings and set Channel to "1" and the Wireless mode to 802.11 bg(In some routers it's 802.11 bg mixed)instead of 802.11 bgn or 802.11 n.(IN SOME ROUTERS THERE'S ONLY .11 and not 802.11....that's the same s**t though!)
    -Reboot your router
    -Shut down your machine and unplug the power cables
    -When done press once the power button
    -Re-Plug the power cables and turn on your MacBook/iMac
    -Go to Network Settings,Advanced settings,TCP/IP and set IPV4 address to DHCP
    SOFTWARE FIX(FIREWALL CONFLICT):
    -Disable ANY non-Apple firewall or network management application such as mDNS responder,etc..

    Great work, nice info, thanks!

  • A FINAL FIX THAT WORKS

    Go to
    http://discussions.apple.com/messageview.jspa?messageID=3349822&stqc=true

    Geez...
    When I tried to quote the original post, the function truncated apparently it... or maybe I did by accident...however, the original post:
    A FINAL FIX
    Posted: Oct 16, 2006 7:45 AM in response to: Tagliente Reply Email
    After much arguing on the phone with apple support, I got a straight answer. The problems are due to old iTunes software and virus protection.
    1) Uninstall iTunes, Apple Update, and Quicktime using the 'Add/Remove' software option in the control panel.
    2) Open your program files folder (Found in My Computer in the C: drive)
    3) Delete any folders that may be left such as iTunes, ipod, Apple Updater, Quicktime)
    4) Download the iTunes 7 install package from the apple website (http://www.apple.com/itunes/download/). Be sure to save the file to your desktop.
    5) Exit your web browser
    6) Turn off all virus protection software. This includes firewalls, spyware protection systemguards, etc. The “how” to do this depends on your virus software. For example, with McAfee open the Security Center and click Computer and Files. Click configure. The new window has the options to turn things off. Turn everything off.
    7) Install iTunes 7 (includes Quicktime [needed for iTunes])
    8) Restart
    9) Turn virus protection and firewalls back on
    10) Plug in iPod and you’re golden!
    This worked for me and I no longer get any messages about iPod in recovery mode or unable to update iPod.
    Good luck.
    Windows XP
    By the way, I think I clearly stated in my post that when trying to update my nano from version 1.2 to 1.3 (after being prompted to do so from launching itunes 7.0.1.8) it will not perform the suggested update offering up a cryptic message about the files on my ipod being in use by another program.
    Now, if you have any constructive ideas, it would be appreciated...

  • Airport Drops and Freezes---- Finally Fixed!

    Ever since I bought my MBP in July, 2009, I have had trouble with total freezes and airport drops.
    The fixes by Apple:
    1. New hard drive, battery, keyboard, logic board
    2. Problem persisted-- new logic board
    3. Problem persisted-- heat sensor was missing the sensor part
    4. Problem persisted-- Genius said it was 3rd party software
    5.Problem persisted-- local Apple certified repair shop had no idea
    6. Problem Persisted-- in the meantime I had done several erase and install. It froze up every time I installed SL
    7. Problem persisted and I took it to Apple Store last week in one last final try. After hours of testing, it froze for them. They ordered new hard drive and logic board. Then the tech noticed it freeze and dropped the internet. He checked one of the logs and saw that the airport card had lost power just before the freeze.
    He replaced the airport card and it is finally fixed-- the first time since July, 2009.
    So if you have freezes and airport drops, be sure to check the airport. The airport was never changed when the logic board, et.al. were replaced.

    Wow! I would think replacing the airport would be the first step in this madness.

  • ACR 4.4 *FINALLY* fixes magenta reds under tungsten light! Yeah!

    Adobe has FINALLY fixed the ugly reds that were always too blueish when shooting in tungsten light and correcting the WB! Hurray! Took them 5 years almost! Before 4.4, no matter how much I calibrated by shooting a CC under tungsten and doing it via the book, it never looked correct.
    Now can they please do this for the daylight profile as well? 1/2 way there!
    I know all about the calibrations and have done them with the CC card, but the reds were always a problem in ACR. Obviously Adobe realized this as well when fixing it in 4.4 for tungsten - they said extreme ends of the color temperature scale.
    So IMO, they can also fix the reds (without having users do ridiculous calibrations that ALWAYS yield negative hues for red and a LOT of saturation for RED) in daylight!
    Pretty please!

    Hi Thomas,
    I went back to look at the tungsten/available light photos, and most are in the mid 2000Ks. The reds look spot on to me with the 4.4 profiles.
    Here's a shot (saved/embedded as sRGB) of a CC taken with a 1DMKIII and then processed in ACR (just WB correction) with the 4.1 and 4.4 profiles. Look at the difference. I'm going by look - not numbers. The 4.4 looks better/more accurate on the reds and other patches too. This is very apparent when shooting clothes, real life objects, etc. that have those hues. 4.4 looks great. In this example it's 2400K +3 (the only ACR adjustment was to WB click on the 2nd patch on the bottom row - 2nd from left). Is this not what was meant by the fix at the extreme ends in the 4.4 release notes? But I also understand the each camera has a 2 profiles - one of which is tungsten. And until now, I had to fuss with the reds. Now I don't! Love it!
    4.1
    http://homepage.mac.com/bogdan_urma/misc/4-1.JPG
    4.4
    http://homepage.mac.com/bogdan_urma/misc/4-4.JPG
    Here's another example from the 5D. I know the hue of the pillows since I own them :) 4.4 looks accurate and 3.3 way off. Look at the EXIF to see the differences. Again, only correction in ACR was click WB.
    3.3
    http://homepage.mac.com/bogdan_urma/misc/3-3-pillows.JPG
    4.4
    http://homepage.mac.com/bogdan_urma/misc/4-4-pillows.JPG
    Bogdan

  • How come my external hard drive is no longer visible in finder even after ticking it in preferences? it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help.

    it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?

    Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
    My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything.   It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
    Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.

  • Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .

    Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
    Firstly, i reset my computer few days ago and never used itunes after that .
    Secondly, the power button on the iphone is broken so i can't set the recovery mode on the phone.
    I Tried connect the itunes with the iphone but the all itunes says 'To allow access , please respond on your iphone' but there's nothing i can do,
    iphone doesn't respond at all .
    I need some help .... i tried everything i could do ..

    Hey jinyoung_20,
    Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, and express replacement service:
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • TC takes longer to re-boot; reports a problem; then fixes itself?

    I had a lot of problems yesterday with my TC. I lost my internet connection and spent 4 hours working on resetting it and the cable modem so they would communicate.
    During that process, and still today, I am finding a slow internet connection. But, the problem I'm writing about here is that when I re-boot the TC it is taking a lot longer than it ever used to in the past. And, once it does boot, the utility pops up that the TC is reporting a problem. When I click continue, it then tells me that the TC is operating as normal.
    I did buy this in March 2008 and I see others are having a lot of power problems. Maybe I'm headed down the same path but for now I do have power and an internet connection, albeit a slow one.
    Any thoughts?
    Thanks.

    Bob-Thanks for the response.
    When I was originally going through this problem I did do a Factory Default Reset as well as a default reset. My connection works but seems to slow at times. What I did this morning was simply a "restart" using the desktop software and it seems to take a very long time, reports a problem, then fixes itself.
    I have left the cable modem unplugged as described.
    I gave up on trying to restore my static IP address that worked for about a year as everything had a "meltdown" and I don't have time to play around with it more. Maybe a holiday project. But it's odd that it's acting this way now after the Factory Default Reset. I may try that again just to see if it helps this time around.

  • How can the diamond problem be fixed in java

    How can the diamond problem be fixed in java?

    aksarben wrote:
    I assume he's referring to this:We all assumed he's referring to that. But since Java doesn't have multiple inheritance of implementation, there is no diamond problem in Java (per se).

  • I'm having "blocked plugin" problems in mail after 10.7.5 update. Anyone else having this problem?  Fixes?      Thanks!

    I'm having "blocked plugin" problems in mail after 10.7.5 update. Anyone else having this problem?  Fixes? 
    Thanks!

    I'm having "blocked plugin" problems in mail after 10.7.5 update. Anyone else having this problem?  Fixes? 
    Thanks!

  • Problem: Final Cut Pro X inaccurately reports "Out of disk space", when I have 333GB free.

    Problem: Final Cut Pro X inaccurately reports "Out of disk space", when I have 333GB free.
    Trying to "share" the compound clip I've created as an mp4 1080p file.

    Editing MP4 media can create all sorts of havoc with FCP.
    Convert the clips to .mov files – either Compressor or MPEG Streamclip will do that – preferably in Pro Res 422
    Russ

  • Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible

    Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible
    Occurs after I load Dreamweaver; most of the time --- Sometimes not until I try to access CSS Designer
    Have screen capture of error (see next page)
    Windows 7 Home Premium - Service Pack 1
    Platform 64 bit OS
    Has worked fine until recently
    Have installed one program (Print Artist Platinum 24 by Nova Development)
    Tried restore point but not dated back far enough
    Uninstalled and reinstalled Dreamweaver CC 2014 from Creative Cloud.. same error
    Any Ideas?

    Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
    Try step #4 and step #12

Maybe you are looking for