PuP price not changed in Material master

Hello All experts
I have one question about the material ledger related transaciton, I have a Material with 2+V (price deter. and price control) setting in Material master data in Accounting 1 TAB. And material ledger is active for this material, the Periodic Unit price is 1 USD in current period and stock is 0.
One PO posted for this Material for purchase with actual price 100 USD, and 101 movement type with special stock indicator E was used in Goods receipt posting. I think these stock will be treated as valuated sales order stock. But GR posting didn't trigger any PuP price change in Material master. Is that situation normal? Pls kindly help.

With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.

Similar Messages

Not able to transfer changes in material master (periodic)

Hi Friends,
Got an issue here. I am not able to transfer the changes I made in material master. I want this as periodic, Made the specific setting in CFC9. And for your information 'Activate ALE Change Pointers Generally' and for massege type are activated.
But when I execute CFP1 I got massege: 'No appropriate master data changes: Transfer has not happen'.
I made changes in material master (global level),..like gross weight changed. Material is in active IM, no duplication.
Any help Please? We are on SCM 7.0.
Thanks,
Satyajit
Edited by: Satyajit Patra on Mar 20, 2010 9:12 PM
OK, Guys I think I need to raise an OOS... It was for SCM 7.0, but was basic config....thts why I edited the thread so many times expecting some responce.
Edited by: Satyajit Patra on Mar 22, 2010 7:41 AM

Hi Satyajit,
Please look at OSS Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
Since Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
We may have same material in different IMs with different plants. Therefore changes of the basic view fields are then contained in multiple IMs. SAP advises to have a larger IM or sequential activation of IMs.
I hope this will help you .
Regards
Datta

PO for Material not exixting in material master

Hi all,
I am creating a po for a material that is not exixting in material master.
I have taken document type NB, Given vendor no, Entered Material No, acc assigment as "X All Aux.acct.assgts".
Material Description, Quantity, Price, Currency, Plant, Material Group, GL Account. and saved the PO.
I done GR and When i am Saving system is Shooting an error "Account Determination for Entry 1200 WRX not possible"
Is the procedure done by me is Correct What is the acc assigment key to be taken.
Is it necessary to maintain a Material Group for this type of Material?
Any settings to be done in transaction event key?
Need to define any Vacluation class for this type of materials?
Regards,

Dear,
This type of error is display at that time when you valuation class is not map with any G/L in OBYC for particullar transaction key.
So go in bellow direction.
Enter T-code OBYC.
Select WRX Transaction Key, Double click on it.
Enter your chart of accout.
Enter your valution class which is display in your error - 1200 than enter your G/L.
Than click on save button.
If it is useful for u, Please revert back.
Regards,
Mahesh Wagh

Changes in Material Master leading to issues in MRP

Hi,
For a particular material a user changed a lot of material master data (MRP1 and MRP2 view) within a couple of hours.
As a result MRP is not working as we would expect:
- some orders have no quantity in the "Available quantity" column in MD04 and as a result do not trigger any PO (Received/Required quantity = -1, but Av qty = blank)
- whenever a shipment is foreseen it is consumed/reserved by/for the order which requested delivery date is closest after that shipment date
These are the changes made to the master data in November 2009:
Planning Strategy Group: from Make-To-Stock Production to No Planning to Strategy Group for Spares & Consumables to No Planning to Strategy Group for Spares & Consumables
MRP Group: from Client Specific MRP Group for Period Mgmt to General to External Procurement to Client Specific MRP Group for Period Mgmt to General to Client Specific MRP Group for Period Mgmt
Availabilty Check: from Indiv. Req. to Indiv. Req w/o PO. to Indiv. Req.
Unplanned Consumption in period: from blank to 11.2009
Fwd Consumption Period: from 0 to 999 to 0
Consumption Mode: from blank to Forward Consumption Only to blank
Unchanged MRP material master data:
Bwd Consumption Period: 0
MRP type: MRP
Planning Time Fence: 1
Lot size: WB (weekly lot size)
Procurement type: External Procurement
Backflush: always backflush
What should we do to have MRP work correctly again for this material?
Changes to material master MRP? Delete all schedule lines and start from scratch in SOs?
All help is much appreciated!
Best regards,
Geert
Edited by: Geert P on Dec 10, 2009 6:08 PM
Edited by: Geert P on Dec 14, 2009 4:04 PM

Solved internally by adjusting Strategy Group

Profit Center is not taken from Material Master

Dear all,
When we post material-related items from SD or MM with link to material/plant (as additional account assginment) then Profit Center is taken from Material Master. But when I manually (FB01 or even FBR2) post similar item with link to material/plant (as additional account assginment) then Profit Center is not taken from Material Master.
Why this happen? How to fix it? We need to derive Profit Centers from Material Master for items that have links to material and posted via FI.

>
Jigar Thakkar wrote:
> Hi,
>
> It will also take effect in FI, as we have defined the same. Status will be 3 (Other transactions + cross-company (orders + billing doc.) for Subsitution in T code 0KEL
>
> Regards,
> Jigar
Just checked this. It's not worked. This subst. not even called (I've checked w/ active Trace).
So, the question is still open. How to derive PCtr from material in manual FI (FB01, FBR2) transactions.

Price unit field in material master

Hi all,
Could you please tell me the use of price unit field in accounting view of material master? I know that it is the unit in terms of which standard price is maintained in material master. I also know that it should be equal or less than costing lot size. But i wanted to know if there is any other impact/use of this field like impact on per unit price etc.
Regards
Suresh

Hi
You have understood it correct...
Just to add one more point, SAP recommends Price Unit to be higher i.e. 100 or 1000 in order to avoid rounding differences in Product Costing, variance calculation
Br, Ajay M

RMDATIND program - used for change the Material Master

Hi Experts,
Could please confirm whether using RMDATIND program can we change the Material master data?...
Thanks
R P R kumaar

Execute this program and you can find an information icon in the toolbar. press that icon. you will complete documentation regarding this program
a®

VK11 Material Description Does Not Came from Material Master

Hi Gurus,
Good day. Please kindly help advice where does the material description in VK11 came from as it displays a different description not equal to material master.
Thank you in advance.
Regards,
Rellie

Dear Rellie,
It should show the same as mentioned in MM01. Plz check again d MM03 as description for a matieral wil always b picked from Mat. Master only across SAP.
If still ny specific issue then share otherwise plz close d thread.
regards

Price change in material master

Hi,
When does the moving average price change, if the PO price or the invoice price is different from the one in material master. Is it after the creation of PO, GR or invoice?
Thanks and regards
Aparna

Hi,
Moving Average price = Total Value
Total Stock
Moving average price updates once you make GR and IV
If you are making GR & IV for new po , then new moving average price of that material will be :
Total stock = stock already present in plant + GR made stock of that new po
Total Value = Total Value of the material in plant + Invoice amount for that new po
Thanks & Regards
Prashanth.venkategowda

Change in material master

Dear all,
I am trying to change the Price control of a material from V to S.
It is showing me a system message as follows:
Price control cannot be changed (cost component split exists)
Message no. M3160
Diagnosis
Costing is active and has already been carried out for the current period. You can only change the price control to "Standard" if the moving average price and the standard price are identical
Now when i am trying to make the standard and moving average price identical,system is throwing an error as follows:
Standard cost estimate exists in period 04 2009
Message no. M8155
Diagnosis
A standard cost estimate has been entered in the material master record for the specified period. This can be a current or future estimate.
Note: This message category can be changed in Customizing for Invoice Verification. This means that you can receive an error message even though the message is defined in the standard system as a warning message.
The following documentation only deals with the standard case.
System response
You cannot manually change prices.
Procedure
1. To update the price determined using a standard cost estimate in the material master and activate the price for material valuation, you have to mark and release the standard cost estimate.
Mark and release standard cost estimate
Procedure for System Administration
2. If you have authorization for Customizing, in Customizing for Product Cost Planning, you can define this message as only a warning or information message for certain users. These users can then change the price manually.
Pls try to throw some light in this issue about how to process the price control change?????????
also pls let me know the spro path for message type M8 155??????
also what is the menu path for M8 155 in product cost planning?
regards,
indranil

http://help.sap.com/erp2005_ehp_03/helpdata/EN/47/60ff6249f011d1894c0000e829fbbd/frameset.htm
For System path of M8 155 go to SPRO - MM - Purchasing - Logistic Invoice Verification - Define Attribute for System Message / OMRM
Regards,
Ashok

Production order variances not updating in material master

We have activated Material ledger-
Price determination selected-2(transaction based)
Finished goods standard price--832.50
Price control in material master-S (Standard Price)
Variances per kg: 265.50 is shown in Moving Price field in Material master-
Why it is not adding to standard Price-
How to add 265.50 per kg(variance) and increase the Finished goods valuation (in the balance sheet)
Thanks in advance
Joseph David

Hi,
After activating ML, if you maintain FG Material Price Control-S with Price Determination-2, the shown Moving Average price is ONLY FOR STATISTICAL/reporting PURPOSE, The goods movements and Material Inventory valuation will not be updated/valuated with Moving Average Price, it will still be done as per Standard Price only. If you want to get the full advantage of ML activated realistic/actual valuation of your inventory and goods movements, you need to change the Material Price Determination to u201C03u201D. Then as per SAP standard ML process, preliminary valuation for the material will be u201CStandard Priceu201D and all Price differences will be accumulated in ML categories and after period/month-end activities, the goods movements and inventory will be evaluated with u201CPeriodic Unit Priceu201D i.e., averaging by taking into consideration all Material Price differences.
Regards
appalas

Updating Price in previous period - Material master

Experts,
I create a new material and want to update the price in previous period. I update successfully through MR21. when i check material master price is shown only in previous period(May) and its howing current period price is ZERO.
Is it possible to bring the previous price to current price tab automatically?
R.S

Hi,
You may check in OMRN and set column price carried over.
In the case of a price change in the previous period or in the previous year, you must define whether the change also applies to the current period. You have two options:
The price change applies only in the previous period or previous year and does not affect the current period.
The price change also applies to the current period; the price in the current period is thus also changed automatically.
Activities
If you want price changes in the previous period or previous year to also change the price in the current period, select column
Price carried over.
Thanks and regards,
Polly

Weight change in material master, update all open PO's

Hello
IS there any standard way for mass update open purchase orders, when weights and volumen in material master change ?
example:
there is a change in neto weight for material AAAA, which is inserted into mm02, basic data for his material. This change doesn't effect already created open orders with this material. Is there any standard way to update them in sap 4.7 ?

Changes will get reflected for new docs only. This is standard.
Now other question comes, why you want to change in PO. I am sure PO are already sent to vendor. Then ideally it is not advisable to change in those PO.
If you haven't sent those PO to vendor, open those PO do some minor corrections SAP will populate the change information in PO documents.
Also changed information will get effective later at GR stage also.
So no question to worry.
Check and revert

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

Change of material master during transfer between SRM and R/3

Hi,
I have a question for modifying material master data between R/3 and SRM.
I would like to know if it is possible to change the material number during the transfer. The reason is:
I have 2 R/3 backends and 1 SRM system. The material codes in the 2 R/3 systems are different but some materials having different numbers in R/3 are referring to the same material. I want to see such materials with the same material number. Is it possible to do this with Middleware plus some interruption in between? The "translation" should be bi-directional.
Thanks

Hi,
No probs if the field is not replicated.No idea how to bring that through replication though.
Coming to the Product Search...Although the number of such materials is less...You will have to modify the Product search which will take care of the display of other products as well.
The Std product search(<b>bbph_product</b>) uses the the search help exit "<b>BBP_F4IF_SHLP_EXIT_PRODUCT_GEN</b>".So you need to replace this one with your custom FM.
In your custom FM,you will have to check for the HARMINIZED code field for all such materials and accordingly while selecting the Material select the HARMONIZED code as the Material number and in the Product search display that HARMONIZED code as the "PRODUCT ID". Also,you will have to develop RFC enabled FM which will actually fetch all the Materials from the BAckend at runtime. Also are you displaying the Product List Plantwise?
Pls give me ur mail ID where i can mail you the sample code.
BR,
Disha.
Pls reward points for helpful answers.

PuP price not changed in Material master

Similar Messages

Maybe you are looking for