Puppet warp automatically zooms in when applying pins

After adding a puppet warp mask over my layer I click to start adding pins and it automatically zooms in 100% around the first pin and changes the current layer I'm on to a 100% crop of what is around the pin. If I zoom out it just zooms out of my current cropped image. I cant pan or move around and if I apply the puppet warp it applys it to that small section that it just zoomed into. Very odd and I can't seem to find a work around. I've used puppet warp several times in CS5 and a few times in cs6 but this just started happening. 13.0.1 x64 Windows 8. Anybody had this happen?

Could you please post screenshots with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Similar Messages

Adobe Premiere Pro CC Timeline automatically zooms in when moving clips around

This is an issue that keeps happening. It has been an ongoing problem with Premiere Pro CC and now 2014.1. It would start after working for a while on a project and become more frequent as the project gets larger. The only way to rectify the problem is restarting the computer. I would be working and I go to drag a clip around on the timeline and the timeline will automatically zoom in and thus place the clip in the wrong location. This happens when I am not holding down any keys. It will continue to zoom in every time I move any clips on the timeline and once it starts it happens on all sequences. While restarting the computer seems to help I have to do that 5 or more times in a day which can be very frustrating. It doesn't seem to be related to any OS, computer, hard drive/storage. Deleting preview files, flushing PRAM, trashing preferences doesn't help either. I usually work with Quicktime files AppleProRes Codec or H.264. Any help or insight into this issue would be greatly appreciated.
Here is a video that demonstrates the bug:
Premiere Pro Version: Every version from 7.0.0 to 8.1
OS Version: Every version of Mavricks and Yosemite including version 10.10.1
The footage I most use is H.264 and ProRes 422
The problem occurs randomly throughout the day, nothing seems to trigger it. When it starts the only way to make it stop is to restart the computer
Other software running at this particular time is” Mail, Evernote, Safari, OmniFocus, On The Job, Text Expander, Messages, Preview
No third-party effects or codecs installed.
Hardware:
Mac Pro (Late 2013)
3 GHz 8-Core Intel Xeon 5
32 GB 1866 MHz DDR3
AMD FirePro D700 6144 MB.
No third-party I/O hardware.
Mercury Playback Engine is turned ON

Hi Patrick,
Sorry, I've never seen that. What happens if you do not run any other software launched as you work? If you have time, please file a bug report: http://adobe.ly/ReportBug
Thanks,
Kevin

My video camera is automatically zoomed in when i open it. How do i fix this?

I am using iPhone 6 and i had updated it to the iOS 8.2. I started using its camera and video camera until one day when i opened the videocamera, it was automatically zoomed in. I tried to zoom out but it didn't work. When i switched to camera, it returned to its normal zoom again, that is, without it zooming in. I tried restarting my phone and it worked. But when it happened again, i did the same resolution but the problem was not fixed. Please help.

Are you sure the account is checked for new mail?
A .Mac type account is really an IMAP type account so any mailboxes stored on the server (under the .Mac account icon in the mailboxes drawer) are automatically synchronized with the server when first launching Mail and connected to the internet if the account is enabled under the Advanced tab for the account preferences.
I have 3 POP type accounts, a .Mac account and 2 IMAP type accounts. As a test, I deselected "Include when automatically checking for new mail" for all accounts and then quit and re-launched Mail. None of my accounts checked the incoming mail server for new mail but all server stored mailboxes for my .Mac account were synchronized with the server.

Zoom problem. Pics automatically zoom in when double clicked. iPhoto 9.5.1

When I double click and open a picture from the photos libraray, they open with a zoom in on only a portion of the picture. When I click/press on Zoom button it reverts picture to original full size image. But once I let go of button it zooms back into corner. Every single pic zooms into the same bottom left hand portion. A navigator box opens that allows me to teframe but once that is closed, it again zooms back into same section.

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
If that fails as a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

Some pages automatically zoom out when I move the cursor

Version 3.6.12 on a Toshiba Satellite laptop. Usually stops when I use Control+ to go back to a readable size, but very annoying.

Hey, I was having the same problem, so I deleted most of the addons...mostly ones I dont need or use...and it stopped doing that.

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Photoshop shuts down when using puppet warp

Whenever I use puppet warp in Photoshop it shuts down when I try to add the second pin. Any ideas why?

Be sure your graphics drivers are up to date..
Benjamin

How can I see what I'm actually video recording on iPad Air so that I don't include extra stuff at the borders of the image? It seems to automatically "zoom in" on the screen, but when I export the video, the picture isn't framed well.

When I try to record a video on the Ipad Air, the screen automatically "zooms in" closer than when I'm taking a photo. So I frame the interview and record it. But when I export it to post it or edit it, I discover that only the screen was zoomed in, the camera wasn't, so I have all this extra stuff around the edges of my frame.
I don't need to zoom in, but I do need to be able to see what I'm shooting--otherwise, as I'm videotaping, I'm guessing at my picture's framing. But every time I switch from photo to video mode, the screen "zooms in." How can I see what I'm actually recording?
I've been searching for an answer for this for a while, but I can't find any responses to it! Thanks.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

Why is my adobe photoshop trying to crash when i use the puppet warp tool?

Every time i go to use the puppet warp tool i need to finish my assignment, photoshop says it is trying to fix the problem and then says it cant fix it and shuts the whole program down. And would like to know why is my adobe photoshop trying to crash when i use the puppet warp tool?

You'll need to give us more information. What OS, what Photoshop version, how much RAM, what is your video card, and what are your performance preferences, etc., etc. -- ??

HT1338 i have just downloaded safari version 6,it quits automatically and also when i zoom in it does scroll up and down smooth

i have just downloaded safari version 6,it quits automatically and also when i zoom in it does not scroll up and down smooth...though i have tried to reset completely several times but still having this problem....please note this started since i have downloaded moutain lion

Hey melthepest,
Thanks for the question. I understand that your iPo classic is not displayed in iTunes when connected to your computer. The following articles include troubleshooting steps that may help resolve your issue, depending on the symptoms:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
iTunes reports that "iTunes cannot recognize this iPod at this time"
http://support.apple.com/kb/TS1416
Thanks,
Matt M.

Image for puppet warping disappears

Today I went to puppet warp a layer, and as soon as I placed the first pin, the image part of the puppet warp disappeared - only the mesh was visible. I can't figure out where to put pins or adjust my layer if I can't see the actual image!
Have been using puppet warp with my current system config for a long time with no issues, and had, in fact, puppet warped several things just a few minutes prior with no issues. I have tried after restarting, using hardly any system resources, and with all other layers visible, and hidden. No matter what I try, as soon as I place the first pin, only the mesh remains and I can't see what I'm trying to warp at all.
Please help!

Hi c.pfaffenbichler,
I did a little more testing - I had previously changed my expansion only small amounts, but if I change it to the maximum, the chain reappears at the edge of the mesh. I can then pin and warp the item, but when I apply the transformation, the results don't match what I see during the warp. It's as if it is warping the chain at its original position, but showing it to me during warp as if it is in a different position.
starting warp with one pin on the chain:
increasing expansion - you can see the original pin where the chain actually is:
what I see during warp - i can definitely see it warping:
after warp is applied - it doesn't look anything like what I did during warp:

Inexplicable behavior by Puppet Warp crashes Photoshop

I am running Photoshop CC 2014.1.0 (release 20140730.r,148 x64) on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version, 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

Yes I did. I always have my drivers up to date & in the right way. Even Audition cc seems to crash at startup on the 2014 edition. Also noticed that that as I started working with flash the preview lags a lot and the cursor lags too.
Pretty disappointing.

Click-and-drag to select multiple points in puppet warp

Hello Community,
Puppet Warp is a great tool. But sometimes I want to isolate an area and only rework that spot, while keeping everything else in place. To do this I have to go around clicking everything to pin it down. I'm wondering if there's a way to automatically pin all possible points, or click-and-drag to create pins at all intersecting points of the web.
Or something like that to easily pin everything down.
Cheers,
Emmy

Well, I normally find the solution here if there is one, so it looks like there is none.
Adobe peeps, can you please take note of my comment? It would really be nice if that was possible.
Cheers,
Emmy

Severe Puppet Warp bug

I have been having this issue with certain uses of Puppet Warp and I'm not sure if it's how I'm using, the settings I have for the warp or my computer.
It happens on two different MacBook Pros with 8GB of RAM, on Mac OS X 10.8.4
I will spend about 40 minutes warping a photo converted to a Smart Object so that it looks like it's wrapping around a blanket like so:
This usually works just fine. I can save the file, and edit the photo more as time goes on and nothing is odd... until I save and come back to the file later.
When I open the file and try to edit the photo in the Smart Object, reduce the size of the entire image, or even just double-click on the Puppet Warp filter on the layer panel, it does this:
The pins are way off the board, the image looks like it's split into different parts and the only way to get it back is to Undo any changes. The settings for the Puppet Warp are: Normal, Normal, 2px
The image is 7"x5" at 240dpi.
This doesn't happen with all of my Puppet Warped images, but this one shows this behavior every single time. At one point I went in and recreated the Smart Object and Puppet Warp and it did the exact same thing after I was finished. This happens in both CS6 and the new CC versions of Photoshop.
Has anyone ever seen anything like this and if so, is there a solution?
Thanks in advance!
-Ian

Thanks for the suggestions. I couldn't come up with any one method to fix the problem. I tried different documents, building the asset without masks of any kind, smaller resolution etc. It did the exact same thing every single time.
I finally just settled with using the other Warp transform method since I ran out of time for delivery.
I'll keep a lookout for anything that may cause this in the future, but it sure is frustrating.
Thanks again!

Puppet Warp - ignore unlinked layer mask

When I am using puppet warp to transform a layer with an unlinked layer mask, the layer mask does not remain in place, it is being warped along with the layer I am working on. This seems to be a bug since the normal transform tools allow the layers to be modified without affecting the mask while it is unlinked.
Grouping the layer by itself and putting the layer mask on the group while I'm using puppet warp to transform the layer works fine and is really not that inconvenient I suppose.
The image I am working on is a large scan of an old map with 12 pages, I'm basically trying to line up all the pages into a seamless image, and so each layer has a mask to hide the margins of each page. I really don't want to have to create a group for each layer just to have each mask stay in place while I'm adjusting the pages. I also do not want to "erase" the margins by applying the layer masks before using puppet warp.
Is this something that will be "fixed" in Photoshop?

I think Puppet Warp is intended to include transparency in the form of Layer Masks, so it seems unlikely that this behaviour will be changed.
You could temporarily turn off the Layer Masks by shift-clicking them.
If you want to make a Feature Request, please post over at
http://feedback.photoshop.com/photoshop_family/

Puppet warp automatically zooms in when applying pins

Similar Messages

Maybe you are looking for