Pur. Req. Import from 10.7 tp 11i

hi all,
I want to import purchase requisitions from 10.7 to 11i as the client is moving from 10.7 to 11i.My question is here during import what value I should set to Multiple Distributions field (MULTI_DISTRIBUTIONS) in the Requisition Import program. Since I am porting from 10.7 can I set it as No.And also since the data is from 10.7 I have to use the PO_REQUISITIONS_INTERFACE_ALL table or the PO_REQ_DIST_INTERFACE_ALL table.
If any body can through some light on this or send me some document on this issues, it will be a great help as I am now to Order Mangement.
mail id : [email protected]
thanks & regards
balraj

I will first give a very high level answer and if you need more detail - just ask away.
First Need to lay down upgrade environment with rapid install - this would include new $APPL_TOP, $806_ORACLE_HOME,$8174_ORACLE_HOME,$IAS_ORACLE_HOME and $COMMON_TOP. This would be in the linux side. Remember rapid install itself has patches and there is a metalink note on the pre-upgrade patches for the apptlop during the upgrade note 112659.1.
Search metalink new patch search for rapid install and find those patches - very important for linux - so of the rapid install versions have issues, the last patch set fixed our problems.
Once this is prepared (upgrade not started) then I used imp/exp to migrate the database and I reorg'd the database at the same time for this - Metalink document 204015.1 was a good source for this. Verses the sysadmin documentation. Then once the database is imported, then begin the upgrade process - we also created a 10.7 on solaris pre-upgrade clone, that is we cloned production to a temporary 10.7 environment, did the pre-upgrade steps up until the database migration, then did the imp/exp , then did the upgrade -
Hope that makes sense, there could be other ways and even different twists with the steps we did. I hope it makes sense, I am not that good in emails and notes, The reason we did the pre-upgrade steps on a clone was so that the current production could serve as a back up in case of any un-anticipated problems happened during the upgrade and as well for the testing process that you go through.
Regards,
Chris

Similar Messages

  • Pur Reqs from APO to R3

    Hi,
    while transferring purchase requistions online(immediately) from APO to R3, we want to have only some products are transferred immediately and others with periodic transfer..
    we tried with the integration model(by having only the products that should go online), but the other products pur reqs are endingup in queues..
    how to rectify this and achieve the above. Thanks

    I think, you must define "immediate transfer" and use enhancement APOCFPEP to delete unnecessary ones.
    This way, no queue should hang. 
    When you want them in R/3 again, delta report can do it.?????
    I checked /SAPAPO/RRP_EVENTS_PUBLISH after creating PR manually in RRP3, here
    iv_publish_events
    iv_collect_events
    et_order_changed
    are all filled, so can trace back to find if some other  enhancements can be used.
    Inside the applications of creating PR, there should be BAdI available to do this even earlier:
    like BAdI /SAPAPO/SNP_TRANSFER, (but I'm not sure if CCR report can pick up the left-overs later.
    Please feedback if you've tested)      BR/Tiemin
    P.S. It suddenly occurred to me if CCR report will go through enhancement APOCFPEP  or not......
    If not, more complicated logic must be coded in the enhancement

  • Lightroom 5.5 Import from Catalog *very* slow performance.

    Importing from a second catalog from a shoot is *very* slow with the last version or couple of versions of Lightroom.  It's been about 20 minutes and the import is moving glacially slow and is only about 20% done.
    Here are as many stats as I have:
    iMac 27" 3.5Ghz Core i7, 32G of ram, 3T fusion drive (the late 2013 model maxed out)
    Master catalog has 117,000 images in it.
    The catalog I'm importing has 948 images in it.
    CPU use during the import is 100% used by lightroom (note that the multiple CPUs can go to more than 100% so this means I think that one CPU is maxed out, though LR can sometimes take 500% of my CPUs during an export)
    Lightroom is using 4.2G of RAM (10G free in activity monitor)
    Hard drive is fairly full, but still has 366G free on it (so about 10%)
    Lightroom Mobile sync is enabled (not on this folder I don't think) but says "service unavailable" at this point.
    Lightroom is fully up to date (5.5) on both iMac and laptop (also a mac in case that matters).  Both are up to date with the latest OS software.
    How I did it was:
    Export the shoot as a new catalog on my iMac
    Transfer it to my laptop (smart previews only, no masters)
    Edit images, metadata, etc
    Transfer the entire folder back (.lrcat, previews, smart previews) to iMac
    In my master catalog do an import from catalog
    Waited for ages for checking for dupes (which I can understand with such a big catalog)
    Selected to import all, changing metadata and develop edits, and selecting to put new images in the folder (not sure why it asked as there weren't any new images)
    The last time I did an import I started it and then went out somewhere so I didn't notice how long it took, but this seems completely crazy.  In the time it's taken to write this up it's now about 20 minutes later and the progress bar is maybe at the 33% range.  It's still working away, it's just crazy crazy slow.
    Anything to help out or debug would be greatly appreciated.  I suspect it's pure size of the catalog, but 120k isn't outside the realm of what I've heard people say works fine, or maybe the Fusion drive (maybe the OS is trying to move files around behind the scenes)? 
    Either way this didn't seem to be an issue until the last couple of versions (I haven't gone and re-installed 5.4 or 5.3 to check) and it's starting to really frustrate me

    Hi Jim,
    Great suggestion! It opens perfectly fine on its own. I even went as far as re-exporting it once it loaded but am still experiencing the same issue. That same catalog loads perfectly fine on my assistant's iMac.
    I can't really think about anything that changed in my environment with the exception of a new Bootcamp partition to run windows on an external Thunderbolt HD but I doubt this is related.
    I'm open to any suggestions while I am trying this again... 10 minutes of 'Checking for changed and duplicate photos'.

  • Req import fails with POCIRM-24a: ORA-01400:

    Req import fails with.
    POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."D

    Please post the details of the application release, database version and OS.
    Req import fails with.
    POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."DPlease follow the steps in these docs for details about the error.
    Adding To Cart Delivers Error - ORA-01400: Cannot Insert NULL Into ("PO"."PO_REQUISITION_LINES_ALL"."DELIVER_TO_LOCATION_ID") [ID 580002.1]
    FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
    Thanks,
    Hussein

  • Save tracking number when pur req created in me51n

    Hi All ,
    when i create purchasre req in me51n then it should be save respective tracking number (Tracking number in sales order number from plaf )  when pur req created .
    plz tell me which user exit will help me .
    Thanks
    regards
    Bhavesh

    Hi,
    Try EXIT_SAPLMEREQ_006
    Cheers,
    Surinder

  • Import From Forbidden Package

    Compiling JSSE source code I got NetBeans warning "Import From Forbidden Package" at every import sun.* statement. Why is import forbidden and where can I read about that prohibition with more details?

    "Those classes were temporarily part of the JSSE API when JSSE was separate from Java 1.3, about ten years ago."
    It seems to me that you are talking about obsolete com.sun.* classes and I agree with you. But sun.* classes are not obsolete and JSSE iplementation uses them for ASN.1 structure parsing (sun.security.util.DerValue, etc) and for other important tasks. May be I don't understand well the difference for Sun implementation, sorry.
    IMHO we can't apply 100% Pure Java term to JSSE because it is part of JDK and so it can't exist separately from JDK implementation.
    Edited by: VBL on Feb 28, 2008 5:30 AM

  • Make to Order strategy 50 creating Pur.req in Past against Sales order

    Hello friends
    We are planning to use strategy 50(MTO) scenario.The material settings for finished product is as below in material master
    Procurement-F External
    Planned delivery time 20
    GR processing time 10.
    Sales order created with requested delivery date of 10-Nov-2011.When the MRP is executed it creates a Pur Req with delivery date in past ie on 05/Nov/2011.
    My requirment is that the system should consider the planned dlvy time+GR processing time=30 days and the pur req should be created with a delivery date of 10-Dec-2011(ie 30 days from 10-Nov-2011).
    What settings needs to be checked the achieve the above result.
    Thanks in advance.
    Thanks
    Harrit

    Dear
    In Material Master Please Check the Schedule Margin Key
    And The repleshment lead Time  and also check the Inhouse production
    i mean to say is Maintain Floats in the Schedule Margin Key
    Go to SPRO >>>Production>>>>Material Requiremet planning >>>>Planning >>>Define Floats
    there u can Adjust Floats Accordingt to ur Requirement
    With regards
    Pushpalas

  • Pur req not generated for MRP element Planned order in stock reqmnts list

    Hi SAP Gurus,
    I have a problem where in MD04, pur req is not generated for the MRP element Planned order for a future date (about two months from now). Is there a specific reason? why is it not being generated? The MRP type is PD. The procurement type is F - external procurement. Can anybody please help me on this?
    Thanks
    Anusha

    Anusha,
    ??  Not sure I understand the question.  Are you saying MRP is creating planned orders instead of  purchase reqs?  Or, are you saying that no proposals at all are being created outside of two months?  Or, are you saying that the system is creating purchase reqs inside of two months, and planned orders outside of two months?
    Regardless, these problems are probably related to your MRP settings.  Try the following settings:
    NEUPL   Regenerative planning             
    1       Purchase requisitions             
    3       Schedule lines                    
    1       MRP list                          
    3       Delete and recreate planning data 
    2       Lead time scheduling and capacity planning
    on your MDBT screen.
    Regards,
    DB49

  • Req Import Questions

    Hi Gurus,
    I have some questions concerning Requisition Import.
    1.) Item_id is not mandatory for Req Import. But when i pass in the Description and the category_id it says list price is missing. When i checked the list price exists for that item. Can some one help me on what other details i should pass in case i dont pass in Item_id.
    2.) Can we create a requisition with a Blanket contract number to come as part of the Import. I know there are columns for blanket header id , blanket line id in po_requisition_lines all but where do we populate these. Is it possible to create a release against a specific Blanket# for a particular requisition?
    Please guide me.
    Thanks

    Answer for the first question:
    Generally the price is being taken up from the item attributes. as item_id is null, you need to manually pass the price too. Along with the price, other mandatory columns are category, UOM, Quantity, Charge account (for creating the distributions) etc.
    Regards,
    Jyoti

  • Res/Pur Req Indicator Field Name AUDISP

    Hello Gurus,
    We are developimg Work flow for reservation/PR craeted for materila under a Service/Network. Please let me know the table where  I could get Res/Pur Req Indicator ( 1 Never, 2 from release, 3 Immediately).
    Srinag

    Hi,
    Please search in google for basic questions, you will get the answer.
    Regards
    Shrikant

  • When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

    When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

    Usual cause: printing at the wrong aspect ratio for the image - trying to print 5 x 3 in the shape of a 6 x 4 for instance.
    Regards
    TD

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Comments not imported from Data Dictionary of SQL Server. SDDM 3.3.0.747

    Hi,
    SDDM 3.3.0.747 32-bit on Windows 7 64-bit.
    Comments are not imported from Data Dictionary of SQL Server 2008. Connection through Microsoft JDBC Driver 4.0 for SQL Server or jTDS 1.2.7
    What I have tried? In SDDM DDL generation, Comments in DBRMS for SQL Server are generated with "EXEC sp_addextendedproperty 'MS_Description' , 'Test Comment' ..." so I added extended property named "MS_Description" into SQL Server database, both on table and column. None of them were imported from Data Dictionary into SSDM. I have tried both drivers stated above. Is it a bug or am I missing something?
    I've found similar question thread Re: Data dictionary import doesn't import column comments for SDDM 3.0.0.665, so I guess it is a bug when importing with JDBC drivers.
    MiGli
    Edited by: MiGli_1006342 on May 25, 2013 8:32 AM
    Edited by: MiGli_1006342 on May 25, 2013 9:02 AM

    Extended properties were not imported correctly from SQLServer databases at DM 3.3.0.747.
    Calls to sp_addextendedproperty and fn_listextendedproperty have been modified.
    I don't think it is a problem with JDBC drivers.
    A bug fix should be available in the next release of DM.

  • SQL modeler can not import from data dictionary

    It was very frustruted to see that the SQL Modeler hang in import from data dictionary of a database as part of revise engineering. I have to question myself if sql modeler is a serious tool and should I give up.

    I am not sure if Data Modeller is still in Beta./Production. First couple off initial versions of a new product are normally buggy.
    Regards
    Alternatively, If this product is still in Beta, then you can contact the development team or report the issue so that they can take care of this issue in next beta release.
    Edited by: skvaish1 on Mar 30, 2010 3:18 PM
    Edited by: skvaish1 on Mar 30, 2010 3:26 PM

  • Unable to Import from my Canon DC220 camcorder...

    I had begun a project with I-movie 6 of which my camcorder was not compatible with...my solution was to upgrade to I-Movie 08 of which the Canon DC220 is compatible with and I-Movie should import from (http://docs.info.apple.com/article.html?artnum=306171). Unfortunately, when I plug my Camcorder into the USB and switch it to PC/Computer mode, I get a pop up on the screen stating that I "inserted a Blank DVD" and gives me a few options on how to proceed. I did try to use other USB ports on the Mac...nothing. I did try a couple different DVDs of which I recorded on...nothing. So I was able to eliminate the problem being with the DVD or the USB port I was using. Please advise as I am at a loss. Thanks so much.

    Unplug your USB cable and then press func. to enter the menu on your camera.
    plug in your cameras power supply. Then select Finalize. This will close the disc and prepare it for importing.
    I'm still having trouble, but this is a step you must follow.

Maybe you are looking for