Pur req not generated for MRP element Planned order in stock reqmnts list

Hi SAP Gurus,
I have a problem where in MD04, pur req is not generated for the MRP element Planned order for a future date (about two months from now). Is there a specific reason? why is it not being generated? The MRP type is PD. The procurement type is F - external procurement. Can anybody please help me on this?
Thanks
Anusha

Anusha,
??  Not sure I understand the question.  Are you saying MRP is creating planned orders instead of  purchase reqs?  Or, are you saying that no proposals at all are being created outside of two months?  Or, are you saying that the system is creating purchase reqs inside of two months, and planned orders outside of two months?
Regardless, these problems are probably related to your MRP settings.  Try the following settings:
NEUPL   Regenerative planning             
1       Purchase requisitions             
3       Schedule lines                    
1       MRP list                          
3       Delete and recreate planning data 
2       Lead time scheduling and capacity planning
on your MDBT screen.
Regards,
DB49

Similar Messages

  • Old Planned Order in Stock/Reqmnt list

    in stock/reqmt list there are some customer order and regarding plnd orders, but when i look in to the customer order through VA03 the respective item is not there. and the respective planned order are not taking the reference of respective customer order, Instead its showing stock order.
    I want to know the cause of this and how to delete them.Planning is done through APO
    Please Help me out

    Does the planned order show up as discrepancy in /sapapo/ccr transaction in APO? You may want to get rid of old planned orders through /sapapo/rlcdel transaction by selecting both APO and R/3 systems

  • Pur. req. not created for Dep.req. of Sub. Contracated Material after MRP

    Hi Guys,
    Pl. observe the below scenario,
    Our client scenario is Make-To-Order     
    u2022     Sales order is created for FG material in plant "0001"
    u2022     Material BOM is created for FG material in Plant "0001" with 10 raw materials
    u2022     Routing is created for FG material in plant "0001"
    u2022     Now MRP is carried out for the FG material, system created Planned order/Purchase requisitions as defined in field u201CProcurement typeu201D in MRP tabs.
    u2022     Purchase requisitions are converted into Purchase orders and against some of the GR is done.
    u2022     Due to some reason, we wanted to subcontract the FG (vendor is u201Cexternal vendoru201D or another plant with in Karle Group).
    u2022     Steps followed to subcontract the FG material
    1.     Converted planned order into Purchase requisition
    2.     Converted Purchase requisition into Purchase order.
    u2022     Now some more raw materials added into FG material BOM in plant "0001" and carried out MRP with planning mode indicator as u201C2 i.e. re-explode BOM and Routingu201D.
    u2022     In T.Code u201CMD04u201D checked to procurement proposals for newly added materials in plant "0001", found out that, system is not generated the purchase requisitions.
    Kindly help me this...
    Regards,
    Satya Prakash

    Dear Satya Prakash,
    If the entire operation is sub contracted ,please try the following steps.
    1.Let the system create a planned order.Create a production order.
    2.Change the control key under the operations tab to PP02.Fill in the required details such as
    a.Purchase group.
    b.Cost element etc and SAVE the order
    3.This will generate a PR.
    Create a Sub contracting PO and process further.
    After the receipt of PO.Close the order.
    Regards,
    Joseph Charles Vaikathussery

  • PR not generating for MRP type VB

    hi all,
          i have  bill of material wich contain some raw material. for this raw material i have maintained MRP type VB , along with reorder point and safety stock in material master
    but after MRP run, i am not gettting requirenemnt of raw material, if i changed the MRP type to PD , then requirenment (PR) coming for raw material. MRP control parameter are NETCH,1,3,1,1,1
    so why i m not geting requirenment with MRP type VB.

    hi,
    Try in the below way:
    Make the Create Preq. indicator as 2 in the planning file...make the delievery schedule as 1(ie. no schedule line)( this would be one of the mistake as you specified as 3)...
    Then maintain the source list with the MRP indicator as 1, make the vendor as FIX, Define proper valid dates in it and save...
    Now try and revert back...
    Hope it helps..
    Regards
    Priyanka.P

  • Schedule Lines not generated for MRP Type PD

    HI All,
    I have created Schduling Agreement, maintained Source List with MRP Relevant - 2 option and maintained Vendor as Fix, maintained info record.
    I have created a material with MRP type as PD and lot size as EX, and strategy group as MTS. Now when i enter requirement through MD61 and do MRP Run through MD02, system is generating PR instead of Del Schdule line inspite of schduling agreement. 
    But If i change MRP type to VB and maintain reorder point and maintain min lot size, then system generates Del Schdule lines for the same material.
    What could be the reason. I want delivery schedules based on MRP Type PD.
    Where I am wrong in MRP Views or in any cutomization. It seems that purchasing part is fine since it creats scudles line so no problem in SA or in Source List.
    Please help
    Regards,
    Vikas

    I have created Schduling Agreement, maintained Source List with MRP Relevant - 2 option and maintained Vendor as Fix, maintained info record.
    I have created a material with MRP type as PD and lot size as EX, and strategy group as MTS. Now when i enter requirement through MD61 and do MRP Run through MD02, system is generating PR instead of Del Schdule line inspite of schduling agreement.
    But If i change MRP type to VB and maintain reorder point and maintain min lot size, then system generates Del Schdule lines for the same material.
    What could be the reason. I want delivery schedules based on MRP Type PD.
    Where I am wrong in MRP Views or in any cutomization. It seems that purchasing part is fine since it creats scudles line so no problem in SA or in Source List.
    Hi Vikas,
                      After being thru with your query,i would like to reply your ultimate question"I want delivery schedules based on MRP Type PD"
    Simple answer:put parameter 'delivery schedule line' as '3'(schedule lines in opening period) without simulation mode.
    Please make sure you  don't make any change with previous settings(custom)
    please get it done and revert.
    Regards
    Chandra

  • Schedule lines not generated after MRP run

    Dear All,
    I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel  and its PurRqs when i check in MD04 ,  the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
    1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT  Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
    2.Maintained Inforecord.
    3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
    4. Quota arrangement for this vendor only.
    5. Created New scheduling agreement.
    6. Material is not sent for subcontracting.
    7. Ran  MD02 with following parameters ,
    Processing key NETCH Net Change in Total Horizon
    Create purchase req. 1 Purchase requisitions in opening period
    Delivery schedules 3 Schedule lines
    Create MRP list 1 MRP list
    Planning mode 3 Adapt planning data (normal mode)
    Please let me know if i am missing something
    Thanks in Advance
    Benny

    Hi,
    Please check the below links...
    Schedule Lines not getting created in MRP
    Schedule Lines not generated for MRP Type PD
    Kuber

  • Planning File Entry not generated for items releveant to PM

    MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
    zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
    But as per the setting of reorder point PR should be initiated.
    When checked the MD21 , material is not flagged ,
    I want to know the specific reason why only  this material is not flagged for MRP run.
    What all settings i can check ?
    MATERIAL TYPE : YMRO   OP Maint/ Repair/OperSup
    Lot size : Repl. to max. stock level after cov. req
    Procurement type   :  F

    Hi,
    Run the reports MDRE & MDAB to ensure the planning file entries are correct.
    About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
    Regards,
    Vivek

  • Purchase requisition not generate for dependent requirement after MRP run

    Hello PP expert,
      In our MTO scenario after MRP run planned order generate for header material but no PR generate for BOM components, (BOM not explode) when we run MRP component level in MD02 PR generate, system showing message "40- No coverage not provided by master plan" in MD04 order tree. this problem coming after when we DIMP applied. I checked some OSS note also.
    Can any one provide right solution.
    thanks in advance.....its urgent as client requirement.
    regards,
    Amit Awasthi.

    Hi Amit
    You must select the green star for the correct answer, in order to close the thread.
    You may also select the yellow start for the helpful answers, in order to award points for those who helped you. See the blog below for more details:
    How to close a discussion and why
    I can see that most of your old threads are still open, therefore, I'd like to ask you to review and close them, by selecting the correct answer.
    BR
    Caetano

  • Not able to find the source requirement of MRP RUN-(planned order)

    Dear All,
    Actullay In MRP run system is generating 10000 qty in planned order but in MD61 there is only 3000 qty and no sales order requirement also exists for the same. And when i rerun the MRP by choosing option 3 in planning mode, then also it is generating the planned order for 10000 qty only but Iam not able find out the base requirement for that. Kindly suggest me the solutions.
    Regards,
    Krishna

    Dear balu
    Check assembly scrap in MRP 1 view
    and also check which lot size u r using
    is it HB - replanishment up to maximum stock level
    or FX - fixed order size
    Kindly check
    Regards
    Sachin

  • Error while creating Absence as "APP-PAY-51271: The assignment is not eligible for the element

    Hi,
    "APP-PAY-51271: The assignment is not eligible for the element."

    Hi Nandhu,
    Can you check below two things which can be cause of this error:
    1. The link definition of the non-recurring element which is tagged with this absence type, as a best practice this should be an open link. If the link definition and the assignment eligibility is not matching then you may receive this error.
    2. If you have defined an accrual plan for this absence type,then check if the accrual plan recurring element is been tagged to the assignment for which you are receiving this error.
    Thanks,
    Sanjay

  • FI  posting not allowed for WBS Element

    Hi All,
    While doing down payment billing I'm getting error that FI posting is not allowed for WBS element. But FI periods are open for all months in 2008.
    Please suggest how to resolve this issue.
    Regards,
    Harish

    Hello
    Account assignment
    If you want to post actual costs and commitments to a WBS element, you have to indicate that the WBS element is an account assignment element in the WBS. All objects that can be assigned costs and commitments within a project (for example, orders, networks, or purchase orders) can only be assigned to a WBS element if you have set the account assignment indicator for the element.
    In Customizing for the Project System, you can set an indicator to specify that costs are planned for all WBS elements or only for specific WBS elements.
    Billing
    If you want to post revenues to a WBS element, you have to indicate that the WBS element is a billing element in the WBS.
    Reg
    assign points if useful

  • TimeStream  Error (not generated for year 1970)

    Dear Experts ,
    I am facing a problem with Time Stream .... When i try to open a Planning Book i am receiving the following message:
    Timestream (TS ZBRSNP_ZF ) not generated for year 1970
    Message no. T9507
    Diagnosis
    The date is outside the periods maintained in the factory or planning calendar (timestreams).
    System Response
    The error causes a system crash.
    Procedure
    a) Regenerate the timestream as far in the future (or possibly the past) as possible
    or
    b) Use the report ZZTSTRDELE to delete the runtime objects of the timestreams, if changes have been made to Customizing settings. For more information, see SAP Note 169885.
    It starts happen after i included Initial Column at Planning Book .... The Factory Calendar that i am using starts on 2006 and ends on 2020 .... The timestream i am using is looking for 2 years in the past and 9 years in the future.
    *The message above says that it is necessary to execute report ZZTSTRDELE but i am having some problems while donwloading SAP note. It is possible do delete it manually?  exist another way to fix this issue?
    Please i hope someone can help me as soon as possible ....
    My Best Regards
    Mauricio Filho

    Hi Sunitha,
    We have same type of problem now, could you plz adivise me how to fix this error and where we need to configure to overcome this error.
    Thanks in advance
    Sreeenivasu

  • Lines are not generated for holidays and sundays

    Hi
    creating a sale order shcedule lines are not generated for sunday for a particular plant .
    Schedule lines are generated for subsequent monday only.
    the plant calander  is also  correct
    with regards
    partha

    Hi
    I would really double check the factory calendar ans the  of the plant and sales organisation
    regards,
    Sidi

  • Excise Accounting document not generated for Imported Asset GR

    Dear all,
    Excise accounting document is not generated for imported asset goods receipt(MIGO)
    but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
    Asset is Dr to GR/IR
    Process is
    1. Create asset purchase order with acct. assignment "A",
    2. Customs miro based on p.o.
    3. Do GR with excise
    4. Post invoice for orginal vendor.
    What will be cause of this problem ?
    How to solve this issue ?

    The above issue may be due to Accout assignmnet -A . Check your accout assignment  in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
    The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
    rewdzzzz is full if correct
    Edited by: manu m on Apr 24, 2010 11:11 AM

  • Accounting document not generating for excise invoice.

    Dear all ,
    my issue is
    accounting document not generating for excise invoice
    we are creating accounting document in J1iin
    with refferance to billing document but the accounting docuemnt is not generating
    the accounting document for billing document is generated
    so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
    please help
    regards
    Subrat

    IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India ->  Account Determination -> Specify Excise Accounts per Excise Transaction
    Check if the following is maintained or not
    DLFC       CR Credit      PLAAED PLA AED account
    DLFC       CR Credit      PLAAT1 PLA AT1 Account
    DLFC       CR Credit      PLABED PLA BED account
    DLFC       CR Credit      PLACESS PLA cess account
    DLFC       CR Credit      PLAECS PLA ECS Account
    DLFC       CR Credit      PLASED PLA SED account
    DLFC       CR Credit      RG23AED RG 23 AED account
    DLFC       CR Credit      RG23AT1 RG 23 AT1 Account
    DLFC       CR Credit      RG23BED RG 23 BED account
    DLFC       CR Credit      RG23ECS RG 23 ECS Account
    DLFC       CR Credit      RG23SED RG 23 SED account
    DLFC       DR Debit       MSUSP CENVAT suspense account
    Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India ->  Account Determination -> Specify G/L Accounts per Excise Transaction
    Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client)

Maybe you are looking for

  • How do I stop  Guest Account from appearing on the login screen?

    All of a sudden - like since I upgraded to iCloud - my login screen displays "Guest User". I have Guest disabled in Accounts. The only account I have active is mine. I don't want Guest to appear on the login screen. How do i stop it from doing so?

  • Adobe Premiere 6.0 and Windows 7

    OK Folks Don't laugh but has anyone tried to install good old Premiere 6.0 on a PC that is running Windows 7? I would appreciate any advice - even "it simply will not work" LoL Many thanks Brian Emmis

  • How to handle and manage a multi Database access in runtime with LCDS?

    Hello there I got several customer working with the same application and I wonder how,  with LCDS,  to manage  in a runtime a multi dataBase access; without creating a configuration "mxl" file in the folder catalina for each database. Indeed, each cu

  • Toshiba Hotkey Utility and Winamp - solution

    I asked question about how yo use Hotkey utility with Winamp. I solve this problem. I change Hotkey.exe file. You can download it from [here|http://www.mkysoft.com/dosyalar/HotkeyWinampPatch.zip] . You can find Readme file there.

  • Report Writing Project - steps to take

    Post Author: sammymark CA Forum: General This is a general question on doing a report writing project. When I begin the project, is it better to gather the user requirements first or to learn the data structures first ?  I am on my first Crystal proj