Purcahsign data tables for the extractors 2lis_02_scl and 2lis_02_itm

Hi,
Can any one tell in which tables the purchasing data is stored in R/3
Thanks in Advance
Dru

Hi........
EKKO >> Purchase document
EKPO >> Purchase document (item level)
EKPV >> Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
EINA >>Purchase info record (main data)
EINE >> Purchase info record (organizational data)
EBAN >> Purchase requisition
EBKN >> Purchase Requisition Account Assignment
T024 >> Purchasing Groups
EKET >> Scheduled lines
EKES >> Vendor confirmed lines
Regards,
Debjani......

Similar Messages

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

How to fill setup table for the Extractor: 2LIS_02_CGR

Hi,
Tthere is no data for the 2LIS_02_CGR extractor in RSA3 T-Code, I would like to load the data and as per my understanding i need to fill the step table.
Could any one provide me the step-by-step to fill the setup table.
Regards,
Prem
Edited by: pannalde on Dec 2, 2010 6:03 AM

Hi Prem:
For more details please refer to the blog by Paulo Junior.
"The SET UP!"
/people/paulo.junior/blog/2010/11/25/the-set-up
Regards,
Francisco Milán.

Data table for the ratings and feedback of the file

User provide feedback and rate the file posted in portal
Where are these detail stored and which table. This is required to generate report the feedbacks and rating of all files posted in a folder.
Sasikala G C

Ratings can be displayed one-track at a time, by topping on the title in the detailed view. BPMs can be displayed only in iTunes on your computer. Perhaps you could utilize Smart Playlists to group your tracks according to these criteria?
You can request features, point out bugs, etc, at Apple Feedback pages.

2lis_02_scl and 2lis_02_itm

Hi developers,
I've activated the extractors 2lis_02_scl and 2lis_02_itm, when I do the initalitation in the setup tables I don't see any record also if in the execution log there are 7230 documents.
Any ideas to solve my problem?
Best Regards!

Hi Roberto,
Thanks for your answer!
You have understood my problem! After the setup OLI3BW for MM-PUR in the table MC02M_0SCLSETUP and MC02M_0ITMSETUP there are not entry and in LBWE I've activated the extractors.
The Extractor LIS for area MM Stock and SD work perfectly.
The problem is only for 02MM! I've opened an OSS note but none answer!
Can you help me, plese?
Thanks a lot!

Setting date format for the entire SQL Server installation - SQL Server 2008 R2-2012

Hi,
I need to safeguard the behaviour of SQL codes that inserting into SQL tables with some date columns. For this purpose, I need to change the date format for the SQL instance and not using CONVERT and CAST.
I've seen the SET DATE FORMAT statement, but if I use it, could I solve my problem?
Thanks

The language setting is related to the database user.
BOL: "DEFAULT_LANGUAGE = { NONE | <lcid> | <language name> | <language alias> }
Specifies the default language for the new user. If a default language is specified for the user and the default language of the database is later changed, the users default language remains as specified.
If no default language is specified, the default language for the user will be the default language of the database. If the default language for the user is not specified and the default language of the database is later changed, the default
language of the user will change to the new default language for the database."
LINK: http://technet.microsoft.com/en-us/library/ms173463.aspx
The default language setting can be overridden by SET LANGUAGE for the session:
http://technet.microsoft.com/en-us/library/ms174398.aspx
Example:
SET LANGUAGE us_english; -- mdy
SELECT CAST ('12/13/2014' as DATE); -- 2014-12-13
GO
SET LANGUAGE british; -- dmy
SELECT CAST ('12/13/2014' as DATE);
GO
(1 row(s) affected)
Changed language setting to British.
Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

CLIENTThe maintenance tables for the logical files; may we use any client

Please see this link http://help.sap.com/saphelp_47x200/helpdata/en/9f/db95e635c111d1829f0000e829fbfe/content.htm
See the import parameter
CLIENT The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
Does it mean that we may use any client even if our client number is different?

I put it back once more

ODS as data source for the next ODS - can't see the name in the DS list

Hello, experts!
Need your help. I'm trying to use Staging ODS for the transaction data to populate data into next level of ODS - Standard ODS. The problem is that Staging ODS does not appear in the Data Source list for the Standard ODS when I Assign data sources(and would not let me paste the Staging ODS data source name either). I did Replicate data source for the Staging ODS and Generate Export data sources but it did not fix the problem.
Any suggestions?
Thank you.
Alina.

OK, you're talking about the selection screen "Available datasources" showing only 50 entries right?
In my system the screen can show more than 900... must be one of your user settings in the gui...
just under the tab "restrictions" there is a line with an arrow pointing down; click this line to expand the restrictions...
In the DataSource field enter 8* or 8<ODS_TECH_NAME> in order to see your DSource.
Otherwise in RSA13 in your Dsources overview, right click it and "assign infosource"; it will also make it...
hope this helps...
Olivier.
Edited by: Olivier Cora on Jul 30, 2008 6:31 PM

IPad Cellular Data Settings for the UK

Hi All,
Please find my blog piece on APN and Cellular Data Settings for the iPad2 in the UK. SOme of these settings do work on the iPhones also.
Thanks
http://www.rhysadams.co.uk/ipad-cellular-data-settings-for-the-uk.php

Yes, and it didn't help.
Now I'm restoring the factory settings (after backing up)... going to see if it works when "clean"...

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

Problem when filling Node and Item tables for the metho add_nodes_and_items

Hi Experts,
I am facing problem when filling Node and Item internal tables for the method add_nodes_and_items.
as i have written the below logic:
LOOP AT gt_partner INTO wa_partner.
    CLEAR lvs_tc_root.
    l_key = l_key + 1.
    lvs_tc_root-node_key   = l_key. "wa_partner-sndprn.
* lvs_tc_root-relatkey = lvf_tc_node_key.
* lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-isfolder   = 'X'.
    lvs_tc_root-n_image    = icon_folder.
    lvs_tc_root-exp_image = icon_folder.
    lvs_tc_root-expander   = 'X'.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'A'. "Successfull
    lvs_tc_root-relatkey   = l_key.
    lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_green_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'B'. "Errors
    lvs_tc_root-relatkey   = l_key    .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_red_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key = 'C'. "Deleted
    lvs_tc_root-relatkey = l_key .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden    = ' '.
    lvs_tc_root-disabled = ' '.
    lvs_tc_root-n_image   = icon_yellow_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
*   LOOP AT gt_partner_item INTO wa_partner_item WHERE sndprn = wa_partner-sndprn
    LOOP AT gt_partner INTO wa_partner_item WHERE sndprn = wa_partner-sndprn.
      CLEAR lvs_item.
      lvs_item-node_key   = l_key.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = wa_partner-sndprn.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'A'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Successful'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'B'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Errors'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'C'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Deleted'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
    ENDLOOP.
ENDLOOP.
CALL METHOD go_tree->add_nodes_and_items
    EXPORTING
      node_table                     = gvt_tc_node_table
      item_table                     = gvt_tc_item_table
      item_table_structure_name      = 'MTREEITM'
    EXCEPTIONS
      failed                         = 1
      cntl_system_error              = 3
      error_in_tables                = 4
      dp_error                       = 5
      table_structure_name_not_found = 6.
If the internal table has more than 1 record getting dump...Runtime Errors         MESSAGE_TYPE_X
Plase let me know how to overcome the problem..
Thanks,
Rajasekhar
Edited by: RajasekharReddy Nevali on Nov 29, 2010 3:43 PM
Edited by: Neil Gardiner on Nov 30, 2010 12:41 PM

Hi ,
U can undestand the code and one more thing dynamically display record for automcally here i am using root nodes please look at that one Same requiremtn i done previously.
cLEAR item.
item-node_key = c_nodekey-root.    "partner1
item-item_name = c_column-column1.
item-class = cl_gui_column_tree=>item_class_text.
item-alignment = cl_gui_column_tree=>align_at_top.
item-font = cl_gui_column_tree=>item_font_prop.
item-text = 'APPLICATION'.
item-length = 30.
APPEND item TO item_table.
DATA:lv_name TYPE tv_itmname VALUE '1',
       lv_nkey TYPE i,
       lv_nkey2 TYPE i,
       lv_nkey_c TYPE string,
       lv_nkey_c2 TYPE string,
       lv_nkey_c3 TYPE string,
       lv_nkey_c4 TYPE string,
       LV_NKEY_C5 TYPE STRING,
       lv_itmkey TYPE i,
       lv_itmkey_c TYPE string,
       LV_INDEX TYPE I.
************************************************LOOP FOR APPLICATION*********
LOOP AT i_otypes INTO wa_otypes.
    read table it_appl into wa_appl with key appl = wa_otypes-applic." BINARY SEARCH.
          if sy-subrc = 0.
            lv_apdes = wa_appl-text1.
          endif.
    CLEAR:item,lv_nkey_c.
    lv_nkey_c = sy-tabix.
    LV_INDEX = SY-TABIX.
    CONDENSE lv_nkey_c.
    CONCATENATE 'N' lv_nkey_c INTO lv_nkey_c.
    node-node_key = lv_nkey_c.
    node-relatkey = c_nodekey-root.
    node-relatship = cl_gui_list_tree=>relat_last_child.
    node-isfolder = 'X'.
    APPEND node TO node_table.
    CLEAR item.
    item-node_key = lv_nkey_c.
    item-item_name = c_column-column1.
    item-class = cl_gui_column_tree=>item_class_text.
    item-font = cl_gui_column_tree=>item_font_prop.
    item-text = wa_otypes-APPLIC.
    item-length = 30.
    APPEND item TO item_table.
     CLEAR item.
      item-node_key = lv_nkey_c.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_apdes.
      item-length = 30.
      APPEND item TO item_table.
     v_acount = v_acount + 1.
     v_acount1 = v_acount1 + 1.
clear lv_apdes.
*****************************************LOOP FOR ARCHIV OBJECTS***************************
    loop at it_obj into wa_obj where applic = wa_otypes-applic.
      CLEAR:item,lv_nkey_c2.
      lv_nkey_c2 = SY-TABIX.
      CONDENSE lv_nkey_c2.
      CONCATENATE 'SN' lv_nkey_c2 INTO lv_nkey_c2.
      node-node_key = lv_nkey_c2.
      node-relatkey = lv_nkey_c.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-object.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-objtext.
      item-length = 30.
      APPEND item TO item_table.
****count all object for final displaying*******
     v_ocount1 = v_ocount1 + 1.
      LV_STR = LV_STR + 1.
     ENDLOOP.
*********************LOOP FOR ARCH OBJECT ALL PROGRAMS*******************************************
   LOOP AT IT_PRG INTO WA_PRG WHERE OBJECT = WA_OBJ-OBJECT.
****************1PRG**********************
IF wa_PRG-REORGA_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-reorga_prg BINARY SEARCH.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item,lv_nkey_c3.
      data : v_no type sy-tabix.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRIT'."wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRITE PROGRAM'."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
       clear lv_text.
************************SSSN NODE***********************
        CLEAR:item,lv_nkey_c4.
      data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
*******COUNT TYPE WRITE PROGRAMS****************
      V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
*endif.
*****************2PRG*****************
IF wa_PRG-RETRIE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-retrie_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'successful'."wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'sucessful PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
*********************************SSSN NODE*******************************
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
**********COUNT THE RELOADPR*******************
          V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
ENDIF.
****************3PRG**********************
IF wa_PRG-DELETE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-delete_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'DELETE'."wa_PRG-DELETE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'NAME OF DELETE PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      endloop.

SID table in the general tab and master data/text tab

Hello Bi Experts,
For example 0material Info-object:
There is a SID table in the general tab i.e /BI0/SCOMP_CODE
There is another SID table Attribute in the master data/text tab i.e /BI0/XCOMP_CODE,here there are Nav attributes with name S__0COMPANY.
When i got 0company info-object it got its own SID table i.e /BI0/SCOMPANY
Can some body explain me what is significance of SID table Attribute in the master data/text tab and what is difference with SID Table of attribute?
Cheers,
Stalin

Hi,
SID is surrogate ID generated by the system. The SID tables are created when we create a master data IO. In SAP BW star schema, the distinction is made between two self contained areas: Infocube & master data tables/SID tables.
The master data doesn't reside in the satr schema but resides in separate tables which are shared across all the star schemas in SAP BW. A numer ID is generated which connects the dimension tables of the infocube to that of the master data tables.
The dimension tables contain the dim ID and SID of a particular IO. Using this SID the attributes and texts of an master data Io is accessed.
The SID table is connected to the associated master data tables via teh char key
Sid Tables are like pointers in C
Tables Starting with Description:
M - View of master data table
Q - Time Dependent master data table
H - Hierarchy table
K - Hierarchy SID table
I - SID Hierarchy structure
J - Hierarchy interval table
S - SID table
Y - Time Dependent SID table
T - Text Table
F - Fact Table - Direct data for cube ( B-Tree Index )
E - Fact Table - Compress cube ( Bitmap Index )
For more info go through the belwo link
http://www.sap-img.com/bw010.htm
Regards,
Marasa.

Master data datasource for the point of delivery and installation.

Hi,
Can any one help me with the Master data datasource for the point of delivery and installation.
Currently i am using ouc_instfacts for installation facts.
With Thanks& Regards,
Shakthi.

Hi Shakti,
I guess you are asking for assignment of installation to POD (table euiinstln)?
Then you should check 0UC_PODINST_ATTR.
Best regards
Harald

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Creation of a Query to show the values for the current month and the last 12 months data.

Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
Hema

Hema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh

Purcahsign data tables for the extractors 2lis_02_scl and 2lis_02_itm

Similar Messages

Maybe you are looking for