Purchase contract with varient

Dear Experts
Need your support pls...
I want to create a purchasing contract(me31k) for an item with vendor. Scenario is like this, purchase price of material X have 2 price as P1 & P2 because if material X required through a process route hot Rolled then price is P1 but material X required with process  route hot rolled and Anneling then price is P2.
Even price P1 can also be change if X material-->Hot rolled but dia is in between 5 mm to 30 mm then price of X material will be P1-1, but dia is 31 mm to 90mm then price is P1+2 and same scenario with material which is hot rolled &  anneled of price P2 mean  if material dia is between 5 mm to 30mm then price P2-1 but dia 31- 90 mm, price P2+2
How can i do..pls help
Regards
Mohit

Thx mr. dev for your reply.
I have to come up with solution that now purchase price of material 'X' have 2 prices as P1 & P2 as material X required through a process route 'hot rolled' then price is P1 but material X required with process  route 'hot rolled' + 'Anneling' then price is P2. then how can i create contract with this conditions. pls help...
Regards
mohit

Similar Messages

  • Backend purchase contract with no plant assigned to it

    Hi,
    We are implementing SRM 5.0 in a classic scenario deployment and we going to create backend purchase contracts directly from bids, that is, no Global Outline Agreements are involved.
    The thing is we would like to create a backend contract that could be consumed by more than one plant, that is, we cannot have a specific plant assigned to that contract.
    Is it a possible scenario to be implemented?
    Best Regards,
    Emilia

    Hello Emilia,
    If you create a R/3 contract from a BID, linked to a BID INVITATION created from a SC, you might get the plant from the SC item.
    Else, plant data (partner Location) is not mandatory in RFQ (at both header and item level).
    So you could have to delete it in your RFQ (if created from a SC), or use the BADI BBP_CTR_BE_CREATE to change sent data:
    Here you can delete plant data, so your R/3 contract is valid for all plants.
    Rgds
    Christophe

  • HT201328 Hi there, I purchased an Iphone 4S, it is currently locked with one carrier, I am in a contract with another carrier. I am trying to unlock the phone, but the Carrier says I have to activate it through them to unlock it. I so not want to do that,

    Hi there, my daughter purchased a used iPhone 4S from a local newspaper who has had it in the lost and found for nearly a year, and no one ever claimed it. It is locked with Telus, my daughter is a Virgin Mobile customer. Telus told me they will only unlock it if she activates it with them, she cannot do that as she is in a contract with Virgin. Is there anything I can do to get around this problem?

    Only the carrier to which the iPhone is locked can unlock it. In
    this case, you must work with Telus. If they have a pay as you go
    plan, activate the iPhone on Telus that way and then after
    you meet whatever requirements Telus has, stop using Telus
    and move the iPhone to Virgin. Or sell the iPhone to someone
    who can use it on Telus.
    Telus is the only one who can unlock that iPhone.

  • Creation of Purchase requisition with reference to Contract documents

    Dear All
    I am not able to create the Purchase requisition with reference to Contract documents, in outline agreement field if I enter the contract document number which is already existing it is not copying the details, again I have to enter all the details like Plant, Material, document type, Qty etc.  Even after selecting the PR document type as RV for outline agreement also it is not coping. Kindly let me know that can we not able to give reference of Contract number in this outline agreement field to create Purchase requisition.
    regards
    Dhanu

    1.Logistics--Materials Management--Purchasing ---Purchase Requisition --Follow-on functions --- Assign and Process
    2.ME57
    3.Select the Assigned Purchase Requisitions checkbox if you also want to see requisitions already assigned, and choose Execute.
    4.On the Assign and Process Purchase Requisitions screen, select the requisition lines for your material.
    5.Choose Assign Manually if the info record already exists.
    6.On the pop-up Assign Source of Supply Manually dialog box, make the following entries:
    Agreement     46XXXXX            Agmt item     10          
    7.Choose Assign Source of Supply.
    For assign the source of supply, you can also choose Assign Automatically (only if not already assigned by MRP due to existing source list). If more than one source exists, select the contract in the Source Overview for Purchase Requisition 100XXXXX window and confirm with Enter.
    When assigning a source, make sure to select the contract.
    8.Choose Save.
    9.Select the line item, and then choose Assignments Overview (SHIFT+F5).
    10.On the Assign and Process Requisitions: Overview of Assignments screen, select the line below Vendor (you can only select one at a time), then choose Process Assignment.
    11.On the Process Assignment: Create PO window, check and make sure the Order Type (NB), Purchasing Group and Purch. Organization fields then choose Continue (Enter) to confirm.
    12.On the Create Purchase Order screen, select the requisition in the Document Overview section and choose Adopt in the left part of the Document Overview screen.
    13.Choose Save.

  • Will i need to purchase data plan if i buy unactivated smartphone while on contract with a basic phone?

    II have a basic phone that is still in contract with a family plan of other basic phones that is not the share everything plan. If i buy my friends unactivated smartphone (DROID X 3G) will i need to purchase a data plan?

    yes, all smartphones require a data plan; you don't have to switch to the Share Everything plan unless you want to (and then all lines on your account would have to switch) ... you can add a tiered data plan (i.e., $30 for 2 GB) for your new smartphone.

  • Contract with Reference Purchase requisition

    Hi experts,
    i created one pr from project system , pr quntity  1000 ea , i created quantity contract with reference to pr, quntity contract quantity is equal to pr quantity,now i am creating another contract with reference to same pr but i am not getting
    any warning and error message like already contract exits for this pr, is any option  to get error message when i am creating second contract.
    regards
    G.vijay kumar

    Hi
    Kindly check following any one of the message would works.
    Materials Management > Purchasing > Environment Data > Define Attributes of System Messages
    06     042     Target value of contract & exceeded by & &
    06     060     Document type/item category &/& (PReq) <-> &/& (contract)
    06     106     No requisition items selectable for contract type &1 item category &2
    You need to set error or warning message:
    Regards
    Shrinivas

  • Purchase order with ref to central contract

    we have created centrallly agreed contract with one vendor , but client wants to create purchase order using  that contract but with different vendor.(vendor field only ) (not through partner roles and vendor sub range)pl suggest if there is way.

    >
    ramjdee wrote:
    > my queston is,  Is it possible to create the purchase order with different vendor  while creating  w.r to   centrally created contract . The contract is having another vendor . example .  CENTRALLY CREATED CONTRACT VENDOR IS  X , but while creating po with ref to the contract can i use other vendor like Y.
    >
    > vendor sub range and partner roles not to be used .
    Is your problem related to contract and support (in terms of "SAP contract and support"), or are you rather talking about relations between different data objects / tables inside your application? If the latter, being a little more verbose (and, especially, posting table definitions) surely would help.
    Cheers,
    Kristian

  • Contract with reference to purchase requisition

    Hi!
    I have this situation: I want to creat a contract with reference to a purchase requisition and I'd want to divide the quantity of the purchase requisition. For exemple: I created a purchase requisition with 100 quantity. Now I'd like to creat a contract with 50 e another contract with 50. After that the system should block the creation of the contract with this requisition, becouse the full quantity is complitly requirid. I activated message 06053 but in this case I can use the purchase requisition only one time (whithout divide the quantity of the purchase requisition). I already put the message 06 076, but it works only for PO, a need it for contracts. As Vijay told me I put messages 06078 and 06099, but it didn´t work out.
    Regards,

    Hi
    With reference to PR, if u creating contract, if the PR quantity completly converted to contract then it will throw the error message " Materials of requisition XXXXXXX item 00010 alr. ordered in full"
    Message no 06076.
    Check this out.
    Regards,
    Raman

  • Contract with Purchase Requisition mandatory

    Hi gurus,
    pls. I need help to customize during creation of contract, the purchase requisiton as mandatory.
    I made the next customizing, but doesn´t work
    1 - SAP Customizing Implementation Guide --> Materials Management --> Purchasing --> Contract --> Define Document Types:
    Create MK4W with copie to MK and create field selection MK4W with copie to MKK.
    Link purchase requisition - document type
    2 - SAP Customizing Implementation Guide -->  Materials Management -->  Purchasing -->  Contract --> Define Screen Layout at Document Level:
    Create MK4W with copie to MKK, and flaged purchase requisiton as reference data at item level.
    The problem is during ME31K, I create a contract without purchase requisition as mandatory, can you tell me if I need to customize something more ? Thanks to show me the path !
    Thanks in advance.

    Dear,
    Did you checked the indicator in selection group for "Reference data, item" for Purchase requisition  as " Reqd Entry".
    Also while creating Contract, make sure you are selcting  MK4W  Document type in Agreement type field.
    Check and revert.
    Regards
    Utsav

  • Purchase contract print preview is displaying items with DEL_IND='X'

    Hi,
    We are using SRM Server 5.5 and have a situation described below
    A purchasing contract is created with, for example, 2 items with status as 'Held' . In change mode, the one item is deleted and the purchasing contract is Released.
    When the button 'Output Preview' is pressed, the system displays the print preview with both the irems although one item is deleted.
    I am trying to find SAP notes for this but I didn't find any relavent note.
    I found one note for not displaying 'Inactive' status items however not found anything for excluding deleted items from print preview.
    Appreciate your inputs on this.
    Thanks and Regards,
    Sambhaji Chawale

    Thanks Georg for your inputs.
    Yes, you are correct we are using custom developed smart form and not SAP Standard. We will be updating the smartform for adding the condition of u201Cselect items with deletion indicator=u2019Blanku2019.
    However we are interested in the standard solution that SAP has provided to cover this. I don't see this condition in SAP standard smart form so this must have been covered through some program code.
    Does anybody have idea on this.
    Thanks and Regards,
    Sambhaji Chawale

  • Problem with Purchase Contract Item Price - 2lis_02_itm

    Hello !
    I used 2lis_02_itm extractor in order to extract the Purchase contracts (transaction me33k in R/3) with Item Prices. The problem is that the extractor takes the price
    from ekpo table but the Contract item prices exist in konp table and its very complicate to calculate the net price.
    Somebody know the solution ?
    Thanks In advance,
    MM. michal

    Thanks for your answer.
    I found out that all the subtotal1-6 are empty in my extractor.
    If you interest I found in R3 transaction  ME3P
    That update the prices from konp in  EKPO and all my problems solved.
    Again thanks , michal

  • Create contract with Purchase Requisition reference using BAPI

    Hi friends! I need some help here to create a contract with reference to some purshase requisition. I found BAPI_CONTRACT_CREATE to do this, but I have no idea how to do to create with reference to pruchase requisition.
    Anyone can give me a sample code or an idea how I can do this?
    Thanks in advance for any help.

    Thanks friend. I filled Header, Headerx, item e itemx but I'm getting this error:
    No instance of object type PurchasingContract has been created. External reference: # 1
    Item category 9 not supported
    I need fill something else?

  • Issue with Idoc for creating purchasing contracts

    Hello everyone,
    I'm trying to create purchasing contracts using Idoc BLAORD3 through LSMW.
    But i have a problem : all informations concerning account assignement are missing on this Idoc.
    Does anyone know how to solve this problem? Maybe is there a BAPI which could replace my Idoc? Or is there another Idoc which could create account assignement seperatly?
    Thanks in advance for your help.
    Cédric

    Hi,
    Try using E1EDK18 segment. Put "Number of days" ,Qualifier and check if this achievs the desired result or not? If yes then you have to use an user exit to put the number of days in the IDOC.
    Cheers,

  • Can I cancel the contract with AT&T immediately after I purchased a refurbished ipad mini 2?

    Hello, I was a student in the US and I am exchanging to Europe for one year now.  I would like to buy a refurnished Ipad mini 2 with AT&T for my study in Europe, which means I don’t need to use AT&T in the next year.
    http://store.apple.com/us/product/FF066LL/A/refurbished-ipad-mini-2-wi-fi-cellul ar-for-att-16gb-space-gray
    It shows we can cancel the contract with out penalty on Apple website. However, I still have some questions:
    1. How to cancel the AT&T contract, if I am not in the US already.
    2. It is supposed can be use for other carrier in Europe, right? (Unlocked/ international)
    Is there anyone can solve my problem? Thank you so much!

    I am in Europe at this moment.
    If I just get a unlocked and without contract ipad mini that would be handy for me:)
    But the name of the product is "
    Refurbished iPad mini 2 Wi-Fi + Cellular for AT&T 16GB - Space Gray".
    I heard that the refurbished products do not under any contract....it was under AT&T before.
    Is it right?
    "Cellular for AT&T" confused me ;$

  • I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks

    I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks

    If you received you phone as part of the contract then surely from a legal pov your contract is with 3 not Apple unless you bought Applecare, if you bought your phone outright then put your 3 SIM into it then yes you'd have to visit an Apple store with your phone's purchase receipt.

Maybe you are looking for